Oilfield Catalog - Gates Corporation

Super Choke & Kill or 15,000 W.P. Cementing Hose
Request for Quote/Order Form
1. You must fill in all the information on the form in order to have your quote
request/order processed. Any missing information can lead to costly
delays in processing your request. If there are any questions about any
part of the form or the application, check details with your oilfield customer,
or call Ron Trujillo at 303-744-4735.
3. The Date, Customer Name, P.O.# (if actual order) must be completed.
Hose Type is Super Choke & Kill or 15,000 W.P. Cementing. Hose Size is
the Hose I.D. Fill in Overall Length of the assembly, Quantity and Working
Pressure. If customer requests safety clamp & chain, lift eye clamp or stainless
steel armor, be sure to check the appropriate boxes.
3. There must be a fitting identified on the form for each end of the hose.
Give all the requested information for each fitting (hub, flange, hammer
union, etc.).
* Type:
* Nominal Size:
* Working Pressure:
* Ring No.:
* Groove: STD or Stainless Steel
4. For examples of how to complete the fitting section see “Most Commonly
Used Weld-On Fittings” section. On each drawing there is an example of
how to fill in the quote form.
5. For any special fitting not pictured on the form use the “Other” category at
the bottom of the form.
6. Check the appropriate box for any certifications or standards (i.e., DNV, ABS,
Lloyd’s of London, etc) that are requested by the customer.
7. For pricing send the quote request form to the appropriate marketing department.
www.gates.com/oilfield
Page 4