Oilfield Catalog - Gates Corporation

Acid-Chemical Hose
Renegade
(Specification 4697G)
RECOMMENDED FOR: Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Renegade The
Ultrahigh Molecular Weight Polyethylene tube stock has excellent chemical resistance and is
backed by Gates Gatron the coupling. Renegade is designed for easy cleaning in bath containing
10% (NaOH) @ 212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications
include over 450 basic chemicals which are building blocks for numerous chemicals used
in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection.
TEMPERATURE: -40°F to +212°F (-40°C to +100°C) normal service. Renegade is designed to withstand fluid temperatures
to 212°F (+100°C), however the rating is dependent on the specific chemical conveyed.
Contact Denver Product Application (303) 744-5070 for any chemical above 125°F (+52°C).
CONSTRUCTION: Tube: Type L (Ultrahigh Molecular Weight Polyethylene). Clear, backed with Gatron XLPE
Reinforcement: Synthetic, high tensile textile with steel wire helix.
Cover: Type P (EPDM). Green corrugated with yellow spiral stripe.
MAXIMUM WORKING
PRESSURE: 125 psi (4”) through 200 psi (3/4”).
PACKAGING: 100’ length coiled and wrapped in polyethylene.
BRANDING: Continuous transfer label. Example: “GATES ® Renegade Acid-Chemical Suction/Discharge
200 PSI (1.38MPa) WP Made In U.S.A. For your safety: Use Permanent Couplings above 125°F.”
SPECIAL ORDER Black, red, blue and yellow covers are made to order and require minimum production order
REQUIREMENTS: quantities of 400 feet per size. For price, add 10% (x1.10) to price. Special production runs
require minimum order quantities of 400 feet per size. If a special transfer label is required,
contact Gates Corporation for minimum quantity. Specific cut lengths available through the Cut
Length Program. Contact Customer Service for details.
REMNANT LENGTHS: Remnant lengths are sometimes available in popular sizes at a discount.
Contact Gates Corporation for pricing, order requirements and availability.
COUPLINGS:
Combination Nipple – Swaged steel with scored or serrated shank, NPT threads same nominal size
as I.D. of hose. Special plastic materials available.
Source: A P G, Band-It-IDEX Inc., Campbell Fittings Inc., Dixon Valve & Cplg. Co.,
Martin Brass Works Inc., P-T Coupling Co., Seal-Fast Inc.
Tri-Lokt - Machined steel insert, male NPT threads only. Held in place with steel yoke and
Band-It Jr. clamps. Insert is reusable - can be reinstalled with new yoke and clamps.
Source: Band-It-IDEX Inc.
Permanent Swaged or Crimped - NPT threads on connecting end of stem for easy flange attachment.
Strong collar to anchor ferrule to stem. Electroplated steel. Also available in stainless steel, brass
and other special metals.
Sources: Campbell Fittings Inc., Dixon Valve & Coupling Co., Gates Corporation, George Myer Co., Inc.
Quick-Connecting - The basic parts of this coupling are a bronze female shank coupler and a male adapter, which have a washer
seal but no threads. These two parts fit snugly together and are held in place by two dams on the female shank coupler, which rotate
against a groove in the male adapter.
This allows the coupling to be connected or disconnected very quickly. Adapters and dust caps are available as shown below.
Standard materials are bronze or aluminum.
Sources: A P G, Dixon Valve Coupling Co., OPW Engineered Systems, P-T Coupling Co., Scully Signal Co., Seal-Fast Inc.
www.gates.com/oilfield
Page 108