FOOT CONTROLS

ISO®-BOARD CONVERSIONS for h-d models with pegs
For those of you who would like to install a board in place of a footpeg - These kits include
our finely chromed ISO-Boards & a cast bracket to connect the board to the slip resistant
splined adapter (sold separately).
Mounting components sold separately (pg 96). Passenger Applications for Softail require Anti-Rotation
Mounts. Installation on other models in place of a male mount footpeg requires P/N 8883 (pg 96).
$
7916 ISO-Board Conversion - Driver or Passenger (pr) 199.99
$
4455 ISO-Board Conversion - Passenger (pr)
219.99
$
4543 Replacement Rubber Pads for ISO-Boards (8 pieces) 14.99
Note: Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener &
no anti-rotation mechanism. The board will apply too much force & loosen the mount from the bike.
DETERMINE THE STYLE THAT BEST FITS YOUR APPLICATION:
PREMIUM FLOORBOARD INSERTS
for driver & passenger
CONSTELLATION BOARDS with male mount
Mounts directly to your standard peg location & gain adjustments in almost any
direction. Extends 4-3/4” back from peg mount & folds at mounting block. Allows
infinite adjustments within 2" horizontal section. Two mounting positions.
4358 Constellation Boards, Male Mount (pr)
1-1/8”
$
4459 Replacement Rubbers (set)
25.99
Important Notice: Be aware of components on bike that may interfere with the placement of boards.
Some angles may cause board to contact other components on the bike before board is folded up completely.
Cornering clearance may be limited if board is positioned to fold up as stock.
Our Premium Inserts for Driver Floorboards ride on rubber isolators to keep
your feet buzz-free. The cushy inserts for Passenger Boards pop right in
place of the stock pads. They’ll look great on any bike using H-D’s Traditional
or Half Moon shape driver boards & D-shaped passenger boards.
7549 Half Moon Driver Boards – ’09-’12 FLSTC, ’08-’11 FLSTSB, &
’10-’12 FLSTFB (pr)
$ 79.99
7553 Traditional Driver Boards – ’84-’12 Electra Glides (except
’04-’05 FLHTCSE & ’06-’12 FLHTCUSE), ’84-’96 Tour Glides,
’98-’09 Road Glides (except ’09 FLTRSE), '11-'12 Road Glide
Ultras (except '11 FLTRUSE), ’94-’12 Road Kings (except
’04-’07 FLHRS, ’07-’08 FLHRSE), ’09-12 Trikes, & ’86-’08
FLST/FLSTC, ’90-’12 FLSTF, ’93-’96 FLSTN, ’97-’03 FLSTS,
’05-’07 FLSTSC, '12 Dyna Switchback (pr)
$ 79.99
7554 Traditional D-Shaped Passenger Boards – ’86-’12 Electra
Glides, Road Glides, Tour Glides, Road Kings & Trikes with
Traditional D-Shaped Passenger Boards – Will also fit all
’86-’12 Softail or '06-'12 Dyna Models Equipped with H-D
Accessory Passenger Floorboard Kits Using Traditional
D-Shaped Passenger Floorboards (pr)
$ 69.99
98
7549
7916 Configuration
P/N 7916 CAN BE USED FOR DRIVER OR
PASSENGER. VERIFY OPERATION OF EXISTING
SHIFT LEVER & BRAKE PEDAL WILL NOT BE
ADVERSELY EFFECTED BY INSTALLATION.
10” L x 4-1/2” W
7553
4455 Configuration
P/N 4455 IS RECOMMENDED FOR PASSENGER
USE ONLY; BRACKET DESIGN ELEVATES BOARD
ABOVE EXISTING PEG LOCATION ABOUT 1-1/4”.
$ 219.99
4572
PASSENGER FLOORBOARD INSERTS
Created from a sculpted black rubber pad with a chromed
inlay, our Inserts match our killer Driver Floorboard Covers.
Easily installed in place of the stock, ribbed rubber pads.
Fits: ’86-’12 Electra Glides, Road Glides, Tour Glides,
Road Kings, & Trikes with Traditional D-Shaped Passenger
Floorboards, also all ’86-’12 Softail or '06-'12 Dyna Models
Equipped with H-D Accessory Passenger Floorboard Kits
Using Traditional D-Shaped Floorboards
4572 Zombie (pr) 69.99
7523 Flame (pr)
$ 69.99
7552 Widow (pr)
$ 69.99
9”x 4-1/2”
7552
7916
7523
W W W . K U R Y A K Y N . C O M
2”
Mounting Block