Presentation - Duroc AB

Certificates
SYLVAC PRODUCTS
3 years guarantee :
The Sylvac mark rests on the conjugation of height industrial competences in electronics, micro-electronic and micromechanics.
Trustful of its products quality, the Sylvac company offer a 3 years guarantee on its unit range.
Error max :
The maximum error mentioned in our technical specifications corresponds
to the acceptable maximum difference between the variation of lowest
measurement and the variation of highest measurement, compared to the
standard value, on all the travel of the instrument.
The local error is in a general way lower than this value. A certificate of
calibration delivered with all our instruments with a resolution of 1 µm, this
one indicates the effective maximum error of the instrument, controlled in
our laboratory.
The repeatability determines the maximum interval in which will be a
series of measurements taken at the same point of the travel of the
instrument by the same operator and under the same conditions.
Error of indication [µm]
2
1
0
-1
-2
Max. error fe
Range [mm]
f e
Web site :
up to date information’s as well as updated files and software can be downloaded on www.sylvac.ch
www.sylvac.ch
www.sylvac.ch
www.mwprogrammation.ch/filapp