Cleco Pneumatic Assembly Tools SP-1000 EN - Wainbee Limited

More documents

Recommendations

Info

Notes 61
Impact Wrenches Telescopic Impact Wrenches Positive Lock Socket Retainer With the positive lock socket retainer, sockets snap on... and stay on until released. Offered on spline drives, the retainer can be serviced without disassembling the tool. Exclusive through-bolt construction reduces replacement costs Steel front end/motor housing/handle are clamped together by four high-strength steel bolts. This exclusive feature provides better tool performance, eliminates stripped threads and loose inserts in motor housing. Positive oil-foam lubrication system reduces major cause of impact wrench maintenance. <strong>Cleco</strong> impact wrenches feature a unique oil-foam bath that provides positive lubrication for the hammer, anvil and other working parts. The system is designed so that if the impact mechanism runs low on 30 wt. oil, the tool will stop running, thus eliminating one of the major causes of impact wrench failure ... lack of lubrication. By simply refilling the oil reservoir, the tool can be returned to service. Other impact wrenches soon throw off grease; run dry causing extra wear that shortens tool life and increases maintenance cost. Proven heavy-duty telescoping impact mechanism adds power...cuts weight... reduces shock to the operator. The smooth-hitting <strong>Cleco</strong> telescopic impact mechanism has only three major parts - hammer, anvil and rotor... providing Anvil Hammer Rotor more power directly to the fastener. The hammer is splined to the inside of the motor, which then impacts directly on the anvil, delivering more power per blow. Other important features include: ■ Comfortable grip handle ■ Outside, inside triggers and pistol grip models ■ Multiposition dead handle, and spade type “D” handle available ■ Throttle can be feathered for speed control ■ Simple face-type reversing valve simplifies maintenance ■ Forged hammer and anvil for greater durability ■ Rotor bearings and steel motor end plates fit either end of motor, reducing spare parts inventory and repair time. Positive lock socket retainer Steel anvil housing gives added strength and durability “Through-bolts” provide a stronger unitized assembly, eliminate stripped housing threads Exclusive breakaway trigger extends handle assembly life Filler hole for oil-foam bath for positive lubrication of hammer, anvil, other working parts Heavy-duty telescoping impact mechanism delivers more power Sand cast housing for durability Built-in muffler has serviceable baffle plates for quieter operation Built-in oiler for motor lubrication 62
Page 1 and 2:
Pneumatic Assembly Tools
Page 3 and 4:
Apex Tool Group, LLC Warranty 2 Ape
Page 5 and 6:
Model Number Index Model Page Model
Page 7 and 8:
Screwdrivers A tradition of quality
Page 9 and 10:
Inline Screwdrivers 2, 14, 8, 88, 3
Page 11 and 12: Pistol Grip Screwdrivers 14 Series
Page 13 and 14: Pistol Grip Screwdrivers 8, 88 & 35
Page 15 and 16: Screwdrivers 14 & 8 Series Stall 14
Page 17 and 18: Screwdriver Accessories Standard an
Page 19 and 20: 18 Notes
Page 21 and 22: Balance Arms Air Cylinder & Spring
Page 23 and 24: Balance Arms Accessories Single Arm
Page 25 and 26: Angle Nutrunners Clecomatic Nutrunn
Page 27 and 28: Angle Nutrunners 14, 24 & 34 Series
Page 29 and 30: Angle Nutrunners 45, 55 & 75 Series
Page 31 and 32: Angle Nutrunners 14, 24, 34, 45, 55
Page 33 and 34: Swingbar Nutrunners Smaller, Faster
Page 35 and 36: Reaction Bar & Swingbar Nutrunners
Page 37 and 38: Flush Socket Nutrunners Clecomatic
Page 39 and 40: Crowfoot Nutrunners Clecomatic Clut
Page 41 and 42: Hold & Drive Nutrunners Clecomatic
Page 43 and 44: Tube Nut Wrenches Clecomatic Clutch
Page 45 and 46: Nutrunner Accessories Torque Reacti
Page 47 and 48: Accessories Cleco TVP-100 Series To
Page 49 and 50: Ratchet Wrenches Stall Type Cleco R
Page 51 and 52: Ratchet Wrenches Stall Type 24 & 34
Page 53 and 54: Ratchet Wrenches Clutch Type H16, H
Page 55 and 56: Ratchet Wrenches Hex Socket Selecti
Page 57 and 58: Pulse Nutrunners Cleco Pulse Tools
Page 59 and 60: Pulse Nutrunners Hydraulic Pulse Sh
Page 61: Pulse Tool Accessories D Series Mai
Page 65 and 66: Impact Wrenches Inline, Pistol Grip
Page 67 and 68: General Accessories Balancers 20042
Page 69 and 70: General Accessories Apex Fastener T
Page 71 and 72: General Accessories Apex µ-Guard Q
Page 73 and 74: Conversion Tables Millimeter - Deci
Page 75 and 76: Sales & Service Centers Note: All l
Page 77 and 78: 76 Notes
show all

Cleco Pneumatic Assembly Tools SP-1000 EN - Wainbee Limited

Create successful ePaper yourself

Delete template?

Save as template?