OETIKER SC Series D - Caseliner

OETIKERSC Series B1Original sizeDN6 1/4˝202020Swing Couplingwith female threadLwith male threadLwith hose stemAADA Part No. LG1/4 205 00 307 56.1G3/8 205 00 308 57.6G1/2 205 00 309 61.1NPT1/4 205 00 311 56.1NPT3/8 205 00 312 58.6NPT1/2 205 00 313 64.6G1/4 205 00 314 47.6G3/8 205 00 315 47.6G1/2 205 00 316 48.6NPT1/4 205 00 317 48.8NPT3/8 205 00 318 48.8NPT1/2 205 00 319 48.6D Part No. L6 mm 1/4˝ 205 00 320 68.18 mm 5/16˝ 205 00 321 68.110 mm 3/8˝ 205 00 322 68.1Features• In accordance with safety standardISO 4414, EN 983• Plug in accordance with ISO 6150-B-12,AFNOR: B-12 NF E 49-053 andUS: MIL-C-4109• Full flow, negligible loss of pressure• Simple operation, no forcerequired• Compact designTemperature Range-20º to + 100ºC (NBR)-4º to + 212ºFOperating Pressure3 inHg (100 mbar) to360 psi (25 bar), connection/disconnection tomaximum 200 psi (15 bar)LMaterials, SealsGuide to selection and ordering (see page 27).with PUR compression fitting6.5x10 205 00 324 62.68x12 205 00 325 65.6S B I Z A20DTENTLPlugwith male threadLAAwith female threadSWSWA Part No. L SWG1/8 255 00 011 34.0 14G1/4 255 00 012 31.0 14NPT1/4 255 00 014 30.7 14NPT3/8 255 00 069 32.7 19G1/4 255 00 016 43.0 17NPT1/4 255 00 018 43.0 17NPT3/8 255 00 274 45.0 19E E C EMaterial CodeA=Steel, nickel plated / aluminumB=Steel, tenifer treatedC=Stainless steelE=Nitrile elastomer (NBR)I =Surface hardened steel, nickel platedS=Surface hardened steel, galvanizedZ=Zinc diecast, nickel plated,orange plastic coatingDLwith hose stemØD Part No. L Ø6 mm 1/4˝ 255 00 019 51.0 148 mm 5/16˝ 255 00 020 51.0 1410 mm 3/8˝ 255 00 021 51.0 14Compatible withIndustrial Interchange 1/4˝AMFLOC20BHansen 1000Foster 3003ParkerB23Cejn 310LSee page 8.®08901544 OETIKER reserves the right to make technical changes in the interest of further developmentwww.oetiker.com11

OETIKERSC Series KDN6 1/4˝Original sizeFeatures• In accordance with safety standardISO 4414, EN 983• Plug in accordance with ISO 6150-C-10and AFNOR: C-10 NF E 49-053• Full flow, negligible loss of pressure• Simple operation, no force required• Compact designTemperature Range-20º to + 100ºC (NBR)-4º to + 212ºFOperating Pressure3 inHg (100 mbar) to360 psi (25 bar), connection/disconnection tomaximum 200 psi (15 bar)2020Swing Couplingwith female thread20LLwith male threadwith hose stemAADA Part No. LG1/4 205 00 156 56.1G3/8 205 00 157 57.6G1/2 205 00 158 61.1NPT1/4 205 00 160 56.1NPT3/8 205 00 161 58.6NPT1/2 205 00 162 64.6G1/4 205 00 163 47.6G3/8 205 00 164 47.6G1/2 205 00 165 48.6NPT1/4 205 00 166 48.8NPT3/8 205 00 167 48.8NPT1/2 205 00 168 48.6D Part No. L6 mm 1/4˝ 205 00 169 68.18 mm 5/16˝ 205 00 170 68.110 mm 3/8˝ 205 00 171 68.1Materials, SealsGuide to selection and ordering (see page 27).LB B I Z Awith PUR compression fitting6.5x10 205 00 276 62.68x12 205 00 277 65.6TENT20DLE E C EMaterial CodeA=Steel, nickel plated / aluminumB=Steel, tenifer treatedC=Stainless steelE=Nitrile elastomer (NBR)I =Surface hardened steel, nickel platedZ=Zinc diecast, nickel plated,orange plastic coatingCompatible withOETIKERDN6Stäubli 06Plugwith male threadLAAwith female threadLSWSWA Part No. L SWG1/8 255 00 093 38.0 14G1/4 255 00 091 35.0 14G3/8 255 00 092 38.0 17NPT1/4 255 00 112 35.7 14NPT3/8 255 00 117 38.7 17G1/8 255 00 100 46.0 14G1/4 255 00 088 47.0 17NPT1/4 255 00 119 48.0 17See page 8.Dwith hose stemLØD Part No. L Ø6 mm 1/4˝ 255 00 113 55.0 148 mm 5/16˝ 255 00 114 55.0 1410 mm 3/8˝ 255 00 115 55.0 1413 mm 1/2˝ 255 00 116 55.0 16®12 www.oetiker.comOETIKER reserves the right to make technical changes in the interest of further development 08901544

Original sizeSwing Couplingwith female thread20LAA Part No. LG1/4 205 00 726 56.1G3/8 205 00 727 57.6G1/2 205 00 728 61.1OETIKERSC Series NDN6 1/4˝Features• In accordance with safety standardISO 4414, EN 983• Full flow, negligible loss of pressure• Simple operation, no force required• Compact design20with male threadAG1/4 205 00 729 47.6G3/8 205 00 730 47.6G1/2 205 00 731 48.620Lwith hose stemDD Part No. L6 mm 1/4˝ 205 00 732 68.18 mm 5/16˝ 205 00 733 68.110 mm 3/8˝ 205 00 734 68.1Temperature Range-20º to + 100ºC (NBR)-4º to + 212ºFOperating Pressure3 inHg (100 mbar) to360 psi (25 bar), connection/disconnection tomaximum 200 psi (15 bar)LMaterials, SealsGuide to selection and ordering (see page 27).with PUR compression fitting6.5 x 10 205 00 735 62.68 x 12 205 00 736 65.6S B I Z A20DTENTLE E C EMaterial CodeA=Steel, nickel plated / aluminumB=Steel, tenifer treatedC=Stainless steelE=Nitrile elastomer (NBR)I =Surface hardened steel, nickel platedS=Surface hardened steel, galvanizedZ=Zinc diecast, nickel plated,orange plastic coatingCompatible withImopacCD25 ,-S ,-NSee page 8.®08901544 OETIKER reserves the right to make technical changes in the interest of further developmentwww.oetiker.com13

OETIKERSC Series PDN6 1/4˝Original sizeFeatures• In accordance with safety standardISO 4414, EN 983• Full flow, negligible loss of pressure• Simple operation, no force required• Compact designSwing Couplingwith female thread20LAA Part No. LG1/4 205 00 438 56.1G3/8 205 00 439 57.6G1/2 205 00 440 61.120with male threadAG1/4 205 00 434 47.6G3/8 205 00 441 47.6G1/2 205 00 442 48.6Temperature Range-20º to + 100ºC (NBR)-4º to + 212ºFOperating Pressure3 inHg (100 mbar) to360 psi (25 bar), connection/disconnection tomaximum 200 psi (15 bar)20Lwith hose stemDD Part No. L6 mm 1/4˝ 205 00 443 68.18 mm 5/16˝ 205 00 444 68.110 mm 3/8˝ 205 00 445 68.1Materials, SealsGuide to selection and ordering (see page 27).LS B I Z APlugwith male threadA Part No. L SWG1/4 255 00 320 43.0 14G3/8 255 00 321 45.5 17TENTASWLE E C EMaterial CodeA=Steel, nickel plated / aluminumB=Steel, tenifer treatedC=Stainless steelE=Nitrile elastomer (NBR)I =Surface hardened steel, nickel platedS=Surface hardened steel, galvanizedZ=Zinc diecast, nickel plated,orange plastic coatingADwith female threadwith hose stemLSWØG1/4 255 00 318 55.0 17G3/8 255 00 319 57.5 19D Part No. L Ø6 mm 1/4˝ 255 00 322 63.0 148 mm 5/16˝ 255 00 323 63.0 1410 mm 3/8˝ 255 00 324 63.0 14Compatible withPCLAC21, AC29, AC91LSee page 8.®14 www.oetiker.comOETIKER reserves the right to make technical changes in the interest of further development 08901544

OETIKERSC Series COriginal sizeDN8 3/8˝Swing Couplingwith female thread24LAA Part No. LG1/4 205 00 345 68.5G3/8 205 00 346 68.5G1/2 205 00 347 69.5NPT1/4 205 00 348 68.5NPT3/8 205 00 349 68.5NPT1/2 205 00 350 73.5Features• In accordance with safety standardISO 4414, EN 983• Full flow, negligible loss of pressure• Simple operation, no force required• Compact design2424with male threadLwith hose stemADG1/4 205 00 351 57.5G3/8 205 00 352 57.5G1/2 205 00 353 58.5NPT1/4 205 00 375 56.2NPT3/8 205 00 354 56.2NPT1/2 205 00 355 58.5D Part No. L8 mm 5/16˝ 205 00 356 81.510 mm 3/8˝ 205 00 357 81.513 mm 1/2˝ 205 00 358 81.5Temperature Range-20º to + 100ºC (NBR)-4º to + 212ºFOperating Pressure3 inHg (100 mbar) to360 psi (25 bar), connection/disconnection tomaximum 200 psi (15 bar)LMaterials, SealsGuide to selection and ordering (see page 27).with PUR compression fitting8x12 205 00 360 75.811x16 205 00 361 80.8S B I Z A24DTENTLPlugwith male threadLwith female threadLDAAwith hose stemSWSWØA Part No. L SWG1/4 255 00 023 31.0 14G3/8 255 00 024 31.0 19NPT1/4 255 00 275 28.7 14NPT3/8 255 00 177 28.7 19G1/4 255 00 026 42.0 17G3/8 255 00 027 43.0 19NPT1/4 255 00 276 42.0 17NPT3/8 255 00 178 43.0 19D Part No. L Ø8 mm 5/16˝ 255 00 029 50.0 1410 mm 3/8˝ 255 00 030 50.0 1413 mm 1/2˝ 255 00 031 50.0 16E E C EMaterial CodeA=Steel, nickel plated / aluminumB=Steel, tenifer treatedC=Stainless steelE=Nitrile elastomer (NBR)I =Surface hardened steel, nickel platedS=Surface hardened steel, galvanizedZ=Zinc diecast, nickel plated,orange plastic coatingCompatible withCejn 320Prevost E.. 07Rectus 25, 26See page 8.L®08901544 OETIKER reserves the right to make technical changes in the interest of further developmentwww.oetiker.com15

OETIKERSC Series DDN8 3/8˝Original sizeFeatures• In accordance with safety standardISO 4414, EN 983• Full flow, negligible loss of pressure• Simple operation, no force required• Compact designSwing Couplingwith female thread24LAA Part No. LG1/4 205 00 018 68.5G3/8 205 00 019 68.5G1/2 205 00 020 69.5NPT1/4 205 00 034 68.5NPT3/8 205 00 035 68.5NPT1/2 205 00 036 73.5Temperature Range-20º to + 100ºC (NBR)-4º to + 212ºF24with male threadLAG1/4 205 00 053 57.5G3/8 205 00 021 57.5G1/2 205 00 022 58.5NPT1/4 205 00 426 56.2NPT3/8 205 00 037 56.2NPT1/2 205 00 038 58.5Operating Pressure3 inHg (100 mbar) to360 psi (25 bar), connection/disconnection tomaximum 200 psi (15 bar)with hose stemD Part No. L8 mm 5/16˝ 205 00 054 81.510 mm 3/8˝ 205 00 055 81.513 mm 1/2˝ 205 00 056 81.524DMaterials, SealsGuide to selection and ordering (see page 27).LS B I Z ATENT24with PUR compression fittingD6.5x10 205 00 057 72.88x12 205 00 058 75.811x16 205 00 059 80.8LE E C EMaterial CodeA=Steel, nickel plated / aluminumB=Steel, tenifer treatedC=Stainless steelE=Nitrile elastomer (NBR)I =Surface hardened steel, nickel platedS=Surface hardened steel, galvanizedZ=Zinc diecast, nickel plated,orange plastic coatingCompatible withNitto 20, 30, 40Plugwith male threadLwith female threadLAASWSWA Part No. L SWG1/4 255 00 032 32.0 14G3/8 255 00 033 32.0 19G1/2 255 00 034 32.0 24NPT1/4 255 00 058 28.7 14NPT3/8 255 00 059 28.7 19NPT1/2 255 00 060 33.0 24G1/4 255 00 035 43.0 17G3/8 255 00 036 44.0 19G1/2 255 00 037 48.5 27NPT1/4 255 00 061 43.0 17NPT3/8 255 00 062 44.0 19NPT1/2 255 00 063 49.0 27See page 9.Dwith hose stemØD Part No. L Ø8 mm 5/16˝ 255 00 038 51.0 1410 mm 3/8˝ 255 00 039 51.0 1413 mm 1/2˝ 255 00 040 51.0 16L®16 www.oetiker.comOETIKER reserves the right to make technical changes in the interest of further development 08901544

Original sizeSwing Couplingwith female thread24LAA Part No. LG1/4 205 00 060 68.0G3/8 205 00 061 68.0G1/2 205 00 062 69.0NPT1/4 205 00 072 68.0NPT3/8 205 00 073 68.0NPT1/2 205 00 074 73.0OETIKERSC Series DLDN8 3/8˝Features• In accordance with safety standardISO 4414, EN 983• Full flow, negligible loss of pressure• Simple operation, no force required• Compact design• Light weight 75 g24with male threadLAG1/4 205 00 063 57.0G3/8 205 00 064 57.0G1/2 205 00 065 58.0NPT1/4 205 00 427 55.7NPT3/8 205 00 075 55.7NPT1/2 205 00 076 58.0Not suitable for knocking,pulsating and vibratingcompressed air toolsTemperature Range-20º to + 100ºC (NBR)-4º to + 212ºFwith hose stemD Part No. L8 mm 5/16˝ 205 00 077 81.010 mm 3/8˝ 205 00 078 81.013 mm 1/2˝ 205 00 079 81.0Operating Pressure3 inHg (100 mbar) to360 psi (25 bar), connection/disconnection tomaximum 200 psi (15 bar)24DLMaterials, SealsGuide to selection and ordering (see page 27).24with PUR compression fittingD8x12 205 00 081 75.311x16 205 00 082 80.3S B I Z ATENTLPlugwith male threadLwith female threadLAASWSWA Part No. L SWG1/4 255 00 032 32.0 14G3/8 255 00 033 32.0 19G1/2 255 00 034 32.0 24NPT1/4 255 00 058 28.7 14NPT3/8 255 00 059 28.7 19NPT1/2 255 00 060 33.0 24G1/4 255 00 035 43.0 17G3/8 255 00 036 44.0 19G1/2 255 00 037 48.5 27NPT1/4 255 00 061 43.0 17NPT3/8 255 00 062 44.0 19NPT1/2 255 00 063 49.0 27E E C EMaterial CodeA=AluminumB=AluminumC=AluminumE=Nitrile elastomer (NBR)I =Surface hardened steel, nickel platedS=Surface hardened steel, galvanizedZ=Zinc diecast, nickel plated,orange plastic coatingCompatible withNitto 20, 30, 40Dwith hose stemØD Part No. L Ø8 mm 5/16˝ 255 00 038 51.0 1410 mm 3/8˝ 255 00 039 51.0 1413 mm 1/2˝ 255 00 040 51.0 16See page 9.L®08901544 OETIKER reserves the right to make technical changes in the interest of further developmentwww.oetiker.com17

OETIKERSC Series E1Original sizeDN8 3/8˝Swing Couplingwith female thread242424LLwith male threadwith hose stemAADA Part No. LG1/4 205 00 115 69.5G3/8 205 00 116 69.5G1/2 205 00 117 70.5NPT1/4 205 00 118 69.5NPT3/8 205 00 119 69.5NPT1/2 205 00 120 74.5G1/4 205 00 121 58.5G3/8 205 00 122 58.5G1/2 205 00 123 59.5NPT1/4 205 00 383 57.2NPT3/8 205 00 124 57.2NPT1/2 205 00 125 59.5D Part No. L8 mm 5/16˝ 205 00 126 82.510 mm 3/8˝ 205 00 127 82.513 mm 1/2˝ 205 00 128 82.5Features• In accordance with safety standardISO 4414, EN 983• Plug in accordance with ISO 6150-C-14and AFNOR: C-14 NF E 49-053• Full flow, negligible loss of pressure• Simple operation, no force required• Compact designTemperature Range-20º to + 100ºC (NBR)-4ºto + 212ºFOperating Pressure3 inHg (100 mbar) to360 psi (25 bar), connection/disconnection tomaximum 200 psi (15 bar)LMaterials, SealsGuide to selection and ordering (see page 27).with PUR compression fitting8x12 205 00 130 76.811x16 205 00 131 81.8B B I Z A24DTENTLPlugwith male threadLwith female threadLAASWSWA Part No. L SWG1/4 255 00 101 44.5 17G3/8 255 00 102 44.5 19NPT1/4 255 00 090 44.7 17NPT3/8 255 00 089 44.7 19G1/4 255 00 103 55.5 17G3/8 255 00 105 57.5 24NPT1/4 255 00 104 56.5 17NPT3/8 255 00 106 57.5 24E E C EMaterial CodeA=Steel, nickel plated / aluminumB=Steel, tenifer treatedC=Stainless steelE=Nitrile elastomer (NBR)I = Surface hardened steel, nickel platedZ=Zinc diecast, nickel plated,orange rubber coatingCompatible withOETIKERDN8Stäubli 08Dwith hose stemØD Part No. L Ø8 mm 5/16˝ 255 00 107 62.0 1410 mm 3/8˝ 255 00 108 62.0 1413 mm 1/2˝ 255 00 109 62.0 1616 mm 5/8˝ 255 00 110 63.0 22See page 9.L®08901544 OETIKER reserves the right to make technical changes in the interest of further developmentwww.oetiker.com19

OETIKERSC Series MDN8 3/8˝Original sizeFeatures• Coupling for breathing air apparatus• BBG approved (German mining employer’sliability insurance association)• Plug according to EN 139 and EN 270• Full flow, negligible lossof pressure• Simple operation, noforce required• 1/4” body sizeTemperature Range-20º to + 100ºC (NBR)-4º to + 212ºFOperating Pressure3 inHg (100 mbar) to360 psi (25 bar), connection/disconnection tomaximum 200 psi (15 bar)Swing Couplingwith female thread202020LLwith male threadwith hose stemAADA Part No. LG1/4 205 00 738 56.1G3/8 205 00 691 57.6NPT1/4 205 00 696 56.1NPT3/8 205 00 697 58.6G1/4 205 00 739 47.6G3/8 205 00 717 47.6NPT1/4 205 00 740 48.8NPT3/8 205 00 699 48.8D Part No. L6 mm 1/4˝ 205 00 741 68.18 mm 5/16˝ 205 00 671 68.110 mm 3/8˝ 205 00 698 68.113 mm 1/2˝ 205 00 742 68.1Materials, SealsGuide to selection and ordering (see page 27).LS B I T ATENTPlugwith male threadASWA Part No. L SWG1/4 255 00 420 34.2 14G3/8 255 00 421 34.2 19G1/2 255 00 422 35.2 24NPT1/4 255 00 433 31.9 14NPT3/8 255 00 434 31.9 19LE E C EMaterial CodeA=Chrome platedB=Chrome platedC=Stainless steel, 1.4310E=Nitrile elastomer (NBR))I =Brass, chrome platedS=Brass, chrome platedT=Zinc diecast, nickel platedCompatible withCejn 344, *342Rectus95 KS, *96 KS* Coupling onlyADwith female threadLwith hose stemLSWØG1/4 255 00 423 45.2 17G3/8 255 00 424 46.2 19G1/2 255 00 425 51.2 27NPT1/4 255 00 435 45.2 17NPT3/8 255 00 430 46.2 19D Part No. L Ø6 mm 1/4˝ 255 00 426 53.2 148 mm 5/16˝ 255 00 418 53.2 1410 mm 3/8˝ 255 00 427 53.2 1413 mm 1/2˝ 255 00 428 53.2 16See page 9.®20 www.oetiker.comOETIKER reserves the right to make technical changes in the interest of further development 08901544

OETIKERSC Series G75% of original sizeDN11 1/2˝35Swing Couplingwith female thread3590.3with male threadAAA Part No. LG3/8 205 00 132 73.8G1/2 205 00 133 77.8G3/4 205 00 134 80.3NPT3/8 205 00 138 78.8NPT1/2 205 00 139 82.3NPT3/4 205 00 140 83.3G3/8 205 00 135 70.3G1/2 205 00 136 70.3G3/4 205 00 137 70.3NPT3/8 205 00 141 70.3NPT1/2 205 00 142 70.3NPT3/4 205 00 143 70.3Features• In accordance with safety standardISO 4414, EN 983• Plug in accordance with ISO 6150-C-17and AFNOR: C-17 NF E 49-053• Full flow, negligible lossof pressure• Simple operation,no force required• Compact designTemperature Range-20º to + 100ºC (NBR)-4º to + 212ºF79.3with hose stemD Part No. L13 mm 1/2˝ 205 00 737 93.3Operating Pressure3 inHg (100 mbar) to360 psi (25 bar), connection/disconnection tomaximum 200 psi (15 bar)35DMaterials, SealsGuide to selection and ordering (see page 27).LB B I T APlugwith male threadLASWA Part No. L SWG3/8 255 00 131 51.0 24G1/2 255 00 132 51.0 24G3/4 255 00 133 51.0 27NPT3/8 255 00 137 50.7 24NPT1/2 255 00 138 50.0 24NPT3/4 255 00 139 51.0 27E E C EDAwith female threadLwith hose stemLØ SWG3/8 255 00 128 65.0 24G1/2 255 00 129 65.0 27G3/4 255 00 130 69.0 32NPT3/8 255 00 134 65.0 24NPT1/2 255 00 135 67.0 27NPT3/4 255 00 136 69.0 32D Part No. L Ø10 mm 3/8˝ 255 00 140 64.0 1713 mm 1/2˝ 255 00 141 64.0 1716 mm 5/8˝ 255 00 142 66.0 22Material CodeA=Steel, nickel platedB=Steel, tenifer treatedC=Stainless steelE=Nitrile elastomer (NBR)I =Surface hardened steel, nickel platedT=Steel, nickel plated, orange paintedCompatible withOETIKERDN11Stäubli 11See page 9.®08901544 OETIKER reserves the right to make technical changes in the interest of further developmentwww.oetiker.com21

OETIKERSC Series HDN111/2˝75% of original sizeFeatures• In accordance with safety standardISO 4414, EN 983• Plug in accordance with ISO 6150-C-17,AFNOR: C-17 NF E 49-053, US: MIL-C-4109• Full flow, negligible lossof pressure• Simple operation,no force required• Compact designTemperature Range-20º to + 100ºC (NBR)-4º to + 212ºFSwing Couplingwith female thread3535Lwith male threadAAA Part No. LG3/8 205 00 103 73.8G1/2 205 00 104 77.8G3/4 205 00 105 80.3NPT3/8 205 00 109 78.8NPT1/2 205 00 110 82.3NPT3/4 205 00 111 83.3G3/8 205 00 106 70.3G1/2 205 00 107 70.3G3/4 205 00 108 70.3NPT3/8 205 00 112 70.3NPT1/2 205 00 113 70.3NPT3/4 205 00 114 70.3Operating Pressure3 inHg (100 mbar) to360 psi (25 bar), connection/disconnection tomaximum 200 psi (15 bar)Lwith hose stemD Part No. L13 mm 1/2˝ 205 00 712 93.3Materials, SealsGuide to selection and ordering (see page 27).35DS B I T ALE E C EPlugwith male threadLASWA Part No. L SWG3/8 255 00 074 45.0 19G1/2 255 00 075 45.0 24G3/4 255 00 290 45.0 27NPT3/8 255 00 277 44.7 19NPT1/2 255 00 278 44.0 24NPT3/4 255 00 291 45.0 27Material CodeA=Steel, nickel platedB=Steel, tenifer treatedC=Stainless steelE=Nitrile elastomer (NBR)I =Surface hardened steel, nickel platedS=Surface hardened steel, galvanizedT=Steel, nickel plated, orange paintedAwith female threadLSWG3/8 255 00 076 59.0 19G1/2 255 00 077 59.0 27G3/4 255 00 078 63.0 32NPT3/8 255 00 279 59.0 19NPT1/2 255 00 280 61.0 27NPT3/4 255 00 292 63.0 32Compatible withIndustrial Interchange 1/2˝AMFLOC10Hansen 520Foster 5205Parker 17Prevost IRM 11Dwith hose stemLØD Part No. L Ø10 mm 3/8˝ 255 00 079 64.0 2213 mm 1/2˝ 255 00 080 62.0 2216 mm 5/8˝ 255 00 081 64.0 22See page 9.®22 www.oetiker.comOETIKER reserves the right to make technical changes in the interest of further development 08901544

OETIKERAir Consumption of Pneumatic Hand ToolsExcellent SealEven small leaks can lead to big losses andthey can also cause serious accidents.It has been shown that in the case ofcompressed air, leaking couplings accountfor an energy loss of 8-15%.Applications for OETIKER Couplings Series A1, B1, K, P, N DN6 / 1/4˝ Series C, D, E, E1 DN8 / 3/8˝Flow rate at 20°C (68°F) and 87 psi (6 bar)SCFMin m 3 per hour0 2 6 11 15 19 23 280 10 20 30 40 5070 105 175 245 350 700100 150 200 300 400 500 700 1000 1500Blow gunSpray gunCrimping toolSwing grinderMetal cutting toolDrilling machine up to Ø 10 mm (3/8”)Rivet hammer Ø 16 mm (5/8”)Pneumatic screwdriverImpact screwdriver up to M16 (5/8”)Grinding machine up to Ø 100 mm (6”)Chisel hammerRecommended hose Ø 6 mm (1/4˝ )inner diameter Ø 8 mm (5/16˝ )Ø 10 mm (3/8˝ )Applications for OETIKER Couplings Series G, H, HB DN11 / 1/2˝Drilling machine up to Ø 32 mm (1 1/4”)Grinding machine up to Ø 180 mm (7”)Grinding machine up to Ø 230 mm (9”)Impact screwdriver up to M 45 (1 3/4”)Recommended hose Ø 13 mm (1/2˝ )inner diameter Ø 16 mm (5/8˝ )Ø 19 mm (3/4˝ )Ø 25 mm (1˝ )Ø 32 mm (1 1/4˝ )®08901544 OETIKER reserves the right to make technical changes in the interest of further developmentwww.oetiker.com25

OETIKERSelection of Couplings and SealsThroughput media Coupling SealThroughput media Coupling Seal Throughput media Coupling SealSCSV ‘R’NBRFPMEPDMAcetone + +Acetylene + +Air + +Aircraft fuel JP3-6 + +Ammonium nitrate + +Amyl alcohol + +Beer + +Blast furnace gas + +Borax + +Butane + +Butyl alcohol + +Butylene + +Caustic soda + +Carbon disulphide + +Calcium hydroxide + +Citric acid + +Copper nitrate + +Coffee + +Compressed air + +Creosote + +Cresol + +Cyclohexane + +Diesel oil + +Distilled water + +Emulsion water-oil + +Essential oils + +Ethyl alcohol + +Ethylene glycol + +Formalin + +Freon 13, 14, 32, 113 + +Freon 114, 115, 142, 152 + +Gear oil + +Glucose + +SCSV ‘R’NBRGlycerine + +Heating oil + +Helium + +Heptane + +Hydrogen + +Hydraulic mineral oil + +FPMInk + +Isopropyl alcohol + +Kerosene + +EPDMLinseed oil + +Liquid ammonia + +Lubricating oil + +Magnesium hydroxide + +Machine oil + +Methane + +Methanol + +Milk + +Mineral oil + +Mercury + +Naphthalene + +Natural gas + +Nitrogen gas + +Oxalic acid + +Paraffin + +Petrol + +Petroleum + +Potassium hydroxide + +Potassium sulphate + +Prussic acid + +Propane gas + +Phosphoric acid 10% + +SCSV ‘R’NBRFPMEPDMSalicylic acid + +Sea water + +Sodium acetate + +Sodium bicarbonate + +Sodium carbonate + +Sodium chloride + +Sodium sulphide + +Steam up to 200° + +Sulphur dioxide + +Sugar root juice + +Tar + +Tetrachloromethane + +Titanium tetrachloride + +Toluene + +Transformer oil + +Trichloroethylene + +Turpentine + +Turbo oil + +Vacuum + +Vegetable oils + +Water up to 80° + +Water up to 140° + +Wine + +Whisky + +Xylol + +Zeolite + +Zinc acetate + +Zinc chloride + +Choice of couplings and seals accordingto throughput mediaThis information is not binding and is basedon the recommendations as made by themanufacturers of the seals.The abbreviations mean:SC = Couplings SCSV ‘R’ = Couplings SV stainless steelNBR = Nitrile elastomerFPM = Fluorine elastomerEPDM = Ethylene-propylene elastomer®26 www.oetiker.comOETIKER reserves the right to make technical changes in the interest of further development 08901544

OETIKERSC Materials and SealsGuide to Selection and OrderingMaterialsOETIKER Swing Couplings are manufacturedfrom high quality materials. Additional specialsurface treatments guarantee greaterdurability with less wear and tear and highresistance to corrosion.The orange coating denotes safety – the plasticsleeve gives increased grip and protects thework piece from possible damage.The cross section and material codes givedetails of the composition of each individualpart.In the case of air, gas and oil – as long as theyare not mixed with any additives – OETIKERCouplings made from standard materials willbe suitable.These details are not binding. Where there isany doubt, tests must be carried out.SealsThe following quality seals are available forOETIKER Couplings. Various seals can beused depending upon the throughput media.All details are not binding. Before use, pleasecontact OETIKER for information about theconcentration, mixture or temperature ofmedia. If there is any doubt, tests should becarried out. All legislation relating to foodstuffsmust be observed.Type NNitrile elastomer (NBR)Good ageing resistance, high mechanicalstrength, resistant to oil and petrol, poorresistance against ozone.Temperature from -20º to +100ºC(-4º to +212ºF).Selection and HandlingIncorrect handling or the wrong choice ofSwing Couplings or accessories can result indamage to property and/or personal injury.The maximum operating pressure for eachmodel as specified by the manufacturer mustnot be exceeded. The throughput medium isa critical factor in the choice of seal andcoupling material. External mechanicalimpact and/or vibration will have an adverseeffect on the durability of couplings andaccessories and should therefore be avoidedor, where this is not possible, limited.OETIKER recommends that couplings andaccessories should be checked periodicallyfor excessive wear and leaks.OETIKER Customer Services Department willbe happy to give you further details aboutthe use of OETIKER Couplings.For more detailed information, please followthe operating instructions.Type VFluorine elastomer (FPM)Very good resistance at high temperatures(except for hot water and steam).Good resistance to many chemicals, ozone,weather. Limited for low temperature range.Temperature from -15º to +200ºC(+5º to +392ºF).Type PEthylene propylene elastomer (EPDM)Very good resistance against hot water andsteam, resistant to ageing and weather, notresistant to mineral oils and grease.Temperature from -40º to +150ºC(-40º to +302ºF).Note about SafetyISO 6150 §7.1 recommends that a hose ofat least 300 mm in length should be usedbetween the coupling and a vibrating tool.Please also read the operating instructionswhich are supplied with the coupling.Note about OrderingIf, instead of the standard version, aspecial seal is required, please specify thiswhen ordering.!08901544 OETIKER reserves the right to make technical changes in the interest of further development®www.oetiker.com27

OETIKER InternationalOETIKER Product Lines and CompaniesClamps and RingsPermanent, tight connection – will only be released if required.For all clamping and pressure ranges, hard or soft materials, hoses,cables or ropes. Made from tube or band, Stepless ® , Self-Tensioningor reusable. Also in rust and acid-resistant materials.Simple and straightforward installation.CouplingsSwing Couplings SC – Full flow. Safely swing to connect.Connects easily and quickly with no force required and no lossof pressure in the system.Quick Action Couplings SV – Two-stage uncoupling.Non-interchangeable and heavy duty ranges also available.Quick-Connectors – a system to connect supply lines simply,fast and safe.AUSTRIAHans OetikerMaschinen- und ApparatebauGes.m.b.H.Eduard-Klinger-Strasse 19A-3423 St. Andrä-WördernTel. +43 2242 33 994-0Fax +43 2242 33 997e-mail info@at.oetiker.comHUNGARYOetiker Hungaria KFTVasvári P.U.11H-9800 VasvárTel. +36 94 370 630Fax +36 94 370 533e-mail info@hu.oetiker.comHinged Steel Beltsand Conveyor ChainsHinged Steel Belts in a wide range of pitches and widths. Flat, dimpled, perforated,slotted – customer-specific production.Conveyor Chains and sprockets for a wide variety of applications in industry andmechanical engineering. There are also rust, acid and heat-resistant versions.Formed and Stamped PartsHolders, rings, special clamps, and many other fastening componentsfor a wide variety of industries. Manufactured using multi-stage toolsin presses with up to 4000 kN load capacity.Sandblasting andSurface Technique*Sandblasting Technique – Sandblasting equipment, jet roomsand cubicles, recovery and filter plants, safety equipment.ROTOL Surface Technique – Deburring and polishing machines,design and construction of plants for rational surface treatmentand finishing.Special Products*Research and development of products as well as solutions forthem to be integrated into assembly procedures internally or oncustomer’s request repeatedly lead to innovative special products.BELGIUMOetiker Belgium N.V.Wellingstraat 102, P.B. 55B-9070 Heusden/Destelbergen (Gent)Tel. +32 9 252 25 55Fax +32 9 252 25 56e-mail info@be.oetiker.comCANADAOetiker Limited203 Dufferin Street SouthP.O. Box 5500Alliston, Ontario L9R 1W7 – CanadaTel. +1 705 435 4394Fax +1 705 435 3155e-mail info@ca.oetiker.comP. R. CHINAOetiker Industries(Tianjin) Ltd.10 Shuangchengzhong RoadBeichen High Tech Industrial ParkTianjin 300400 – P.R. ChinaTel. +86 22 26 97 11 83Fax +86 22 26 97 13 80e-mail info@cn.oetiker.comCZECH REPUBLICHans Oetiker spol s.r.o.Videnska 116CZ-37833 Nová BystriceTel. +420 384 386513Fax +420 384 386513e-mail info@cz.oetiker.comINDIAOetiker India Pvt. Ltd.308, Gateway PlazaHiranandani GardensPowai400076 Mumbai – IndiaTel. +91 22 5678 0115Fax +91 22 5678 0116e-mail info@in.oetiker.comMEXICOOetiker de México S de RL de CVOceanía No. 102Fracc. Ind. Unidad Nacional IISanta Catarina, N.L. 66350 – MéxicoTel. +52 81 8390 0237Fax +52 81 8390 1371e-mail info@mx.oetiker.comNETHERLANDSOetiker Nederland B.V.Hertzstraat 38NL-6716 BT EdeTel. +31 318 63 71 71Fax +31 318 63 34 89e-mail info@nl.oetiker.comSLOVAKIAHans Oetiker spol. s.r.o.Sibírska c. 2SK-90851 HolícTel. +421 34 66 83 368Fax +421 34 66 02 011e-mail info@sk.oetiker.com* Not available in all countriesThe addresses of all OETIKER companies and agenciesare included on our website.www.oetiker.com®Connecting TechnologyOETIKER has been developing connectingtechnology for over 60 years.OETIKER products are manufactured by its owncompanies in line with ISO/TS 16949 and soldworldwide in over 40 countries. Numerouspatents are proof of continuous innovation.Headquarters Hans Oetiker AGSWITZERLAND Maschinen- undApparatefabrikOberdorfstrasse 21CH-8812 Horgen (Zürich)Tel. +41 44 728 55 55Fax +41 44 728 55 15e-mail info@ch.oetiker.comFRANCEOetiker Sàrl9, rue Jean MoulinZA du Pré FuséF-77348 Pontault-Combault CedexTel. +33 1 60 29 90 39Fax +33 1 64 40 90 23e-mail info@fr.oetiker.comGERMANYHans Oetiker Metallwaren-& Apparatefabrik GmbHÜsenbergerstrasse 13D-79346 Endingen a.K.Tel. +49 76 42 6 84-0Fax +49 76 42 6 84-1 25e-mail info@de.oetiker.comKurt Allert GmbH & Co. KGPostfach 1160Austrasse 36D-78727 Oberndorf a.N.Tel. +49 74 23 87 70-0Fax +49 74 23 87 70-87e-mail info@allert.oetiker.comSPAINOetiker España, S.A.Pol. Ind. Las SalinasC/Puente, 18E-11500 El Puerto de Santa María (Cádiz)Tel. +34 956 86 04 40Fax +34 956 87 17 07e-mail info@es.oetiker.comUNITED KINGDOMOetiker UK LimitedFoundry CloseGB-Horsham, Sussex RH13 5PXTel. +44 1403 26 04 78Fax +44 1403 24 06 90e-mail info@uk.oetiker.comUSAOetiker, Inc.3305 Wilson StreetMarlette, Michigan48453-0217 – USATel. +1 989 635 3621Fax +1 989 635 2157e-mail info@us.oetiker.com08901544 / 04.06 / AWT WERBEAGENTUR / © OETIKER