OETIKER SC Series D - Caseliner

More documents

Recommendations

Info

OETIKERSelection of Couplings and SealsThroughput media Coupling SealThroughput media Coupling Seal Throughput media Coupling SealSCSV ‘R’NBRFPMEPDMAcetone + +Acetylene + +Air + +Aircraft fuel JP3-6 + +Ammonium nitrate + +Amyl alcohol + +Beer + +Blast furnace gas + +Borax + +Butane + +Butyl alcohol + +Butylene + +Caustic soda + +Carbon disulphide + +Calcium hydroxide + +Citric acid + +Copper nitrate + +Coffee + +Compressed air + +Creosote + +Cresol + +Cyclohexane + +Diesel oil + +Distilled water + +Emulsion water-oil + +Essential oils + +Ethyl alcohol + +Ethylene glycol + +Formalin + +Freon 13, 14, 32, 113 + +Freon 114, 115, 142, 152 + +Gear oil + +Glucose + +SCSV ‘R’NBRGlycerine + +Heating oil + +Helium + +Heptane + +Hydrogen + +Hydraulic mineral oil + +FPMInk + +Isopropyl alcohol + +Kerosene + +EPDMLinseed oil + +Liquid ammonia + +Lubricating oil + +Magnesium hydroxide + +Machine oil + +Methane + +Methanol + +Milk + +Mineral oil + +Mercury + +Naphthalene + +Natural gas + +Nitrogen gas + +Oxalic acid + +Paraffin + +Petrol + +Petroleum + +Potassium hydroxide + +Potassium sulphate + +Prussic acid + +Propane gas + +Phosphoric acid 10% + +SCSV ‘R’NBRFPMEPDMSalicylic acid + +Sea water + +Sodium acetate + +Sodium bicarbonate + +Sodium carbonate + +Sodium chloride + +Sodium sulphide + +Steam up to 200° + +Sulphur dioxide + +Sugar root juice + +Tar + +Tetrachloromethane + +Titanium tetrachloride + +Toluene + +Transformer oil + +Trichloroethylene + +Turpentine + +Turbo oil + +Vacuum + +Vegetable oils + +Water up to 80° + +Water up to 140° + +Wine + +Whisky + +Xylol + +Zeolite + +Zinc acetate + +Zinc chloride + +Choice of couplings and seals accordingto throughput mediaThis information is not binding and is basedon the recommendations as made by themanufacturers of the seals.The abbreviations mean:SC = Couplings SCSV ‘R’ = Couplings SV stainless steelNBR = Nitrile elastomerFPM = Fluorine elastomerEPDM = Ethylene-propylene elastomer®26 www.oetiker.comOETIKER reserves the right to make technical changes in the interest of further development 08901544
OETIKERSC Materials and SealsGuide to Selection and OrderingMaterialsOETIKER Swing Couplings are manufacturedfrom high quality materials. Additional specialsurface treatments guarantee greaterdurability with less wear and tear and highresistance to corrosion.The orange coating denotes safety – the plasticsleeve gives increased grip and protects thework piece from possible damage.The cross section and material codes givedetails of the composition of each individualpart.In the case of air, gas and oil – as long as theyare not mixed with any additives – OETIKERCouplings made from standard materials willbe suitable.These details are not binding. Where there isany doubt, tests must be carried out.SealsThe following quality seals are available forOETIKER Couplings. Various seals can beused depending upon the throughput media.All details are not binding. Before use, pleasecontact OETIKER for information about theconcentration, mixture or temperature ofmedia. If there is any doubt, tests should becarried out. All legislation relating to foodstuffsmust be observed.Type NNitrile elastomer (NBR)Good ageing resistance, high mechanicalstrength, resistant to oil and petrol, poorresistance against ozone.Temperature from -20º to +100ºC(-4º to +212ºF).Selection and HandlingIncorrect handling or the wrong choice ofSwing Couplings or accessories can result indamage to property and/or personal injury.The maximum operating pressure for eachmodel as specified by the manufacturer mustnot be exceeded. The throughput medium isa critical factor in the choice of seal andcoupling material. External mechanicalimpact and/or vibration will have an adverseeffect on the durability of couplings andaccessories and should therefore be avoidedor, where this is not possible, limited.OETIKER recommends that couplings andaccessories should be checked periodicallyfor excessive wear and leaks.OETIKER Customer Services Department willbe happy to give you further details aboutthe use of OETIKER Couplings.For more detailed information, please followthe operating instructions.Type VFluorine elastomer (FPM)Very good resistance at high temperatures(except for hot water and steam).Good resistance to many chemicals, ozone,weather. Limited for low temperature range.Temperature from -15º to +200ºC(+5º to +392ºF).Type PEthylene propylene elastomer (EPDM)Very good resistance against hot water andsteam, resistant to ageing and weather, notresistant to mineral oils and grease.Temperature from -40º to +150ºC(-40º to +302ºF).Note about SafetyISO 6150 §7.1 recommends that a hose ofat least 300 mm in length should be usedbetween the coupling and a vibrating tool.Please also read the operating instructionswhich are supplied with the coupling.Note about OrderingIf, instead of the standard version, aspecial seal is required, please specify thiswhen ordering.!08901544 OETIKER reserves the right to make technical changes in the interest of further development®www.oetiker.com27
Page 11 and 12: OETIKERSC Series B1Original sizeDN6
Page 13 and 14: Original sizeSwing Couplingwith fem
Page 15 and 16: OETIKERSC Series COriginal sizeDN8
Page 17: Original sizeSwing Couplingwith fem
Page 20 and 21: OETIKERSC Series MDN8 3/8˝Original
Page 22: OETIKERSC Series HDN111/2˝75% of o
Page 28: OETIKER InternationalOETIKER Produc

OETIKER SC Series D - Caseliner

Create successful ePaper yourself

Delete template?

Save as template?