Moose Racing 2015

APPAREL
COMPETITION REPACK
CARTRIDGE
° ° Offers consistent packing density
° ° Cuts installation time in half
° ° 25% lighter than stock packing
° ° Lasts 5-10X longer
than glass mat packing
° ° Outer casing made from carbon-coated fiber,
which remains intact for removal of used part
° ° If noted in chart, these parts were designed flat due to the
OEM attaching wool to the core or a fixture on the core that
prevents the pre-rolled cartridge from being slid onto the core
° ° Made in the USA
COMPETITION REPACK
CARTRIDGE-OEM
MAKE/MODEL/YEAR PART #
HONDA 2-STROKE
CR80/85EXPERT 96-07 MFRD1-0875
CR125 93-07
MFRD1-1025
CR250 92-07
MFRD1-1175
HONDA 4- STROKE
CRF250R 07-09 1860-0172
CRF450R 02-03
1860-0091 A
CRF450R 04-08 1860-0033
CRF450R 09-10 1860-0534
KAWASAKI 2- STROKE
KX65 02-11 1860-0090
KX80/85/100 91-11 MFRD1-1025
KX125 02-05
MFRD1-1025
KX125 96-01
MFRD1-1175
COMPETITION REPACK
CARTRIDGE-OEM
MAKE/MODEL/YEAR PART #
KAWASAKI 2-STROKE (CON’T)
KX250 96-02
MFRD1-1175
KX250 03-07
MFRD1-1025
KAWASAKI 4- STROKE
KX250F 04-08 1860-0050
KX450F 06-10
1860-0091 A
KTM 2- STROKE
50/60/65 ADV,SX
02-12 1860-0097
85/105SX,XC 03-12 MFRR2-011F A
125SX 00-05
MFRR2-011F A
125SX 06 1860-0123
150XC 10 1860-0123
COMPETITION REPACK
CARTRIDGE-OEM
MAKE/MODEL/YEAR PART #
KTM 2-STROKE (CON’T)
125/200/250/300/
380EXC,MXC 98-05 MFRD1-0016
200/250/300XC-W
06-10 1860-0124
200/250/300XC-W
11-12 1860-0536
250SX 04-06 1860-0123
250SX 07-10 1860-0533
200XC 06-07 1860-0123
200XC 08-09 1860-0533
250/300XC 06 1860-0123
250/300XC 07-09 1860-0533
250/300XC 10 1860-0124
250/300XC 11-12 1860-0536
KTM 4- STROKE
250EXC-G 03-04
MFRE1-0115 A
250XCF-W 06-07 1860-0055
250XCF-W 08-10
MFRE1-0115 A
250SX-F 05-06 1860-0055
250SX-F 07,09,11-12 1860-0092
250SX-F 08,10 1860-0535
250XC-F 08-09 1860-0055
400/450/520/525/530
EXC,EXC-G/R,MXC,
MXC-G 01-08
MFRE1-0115 A
400/450/520/525/530
XCR-W,XC-W,SMR
01-08 MFRE1-0115 A
400/450/525 SX,SX-F,
XC, XC-G 01-07, 11-12 1860-0055
COMPETITION REPACK
CARTRIDGE-OEM
MAKE/MODEL/YEAR PART #
KTM 4-STROKE (CON’T)
450/505XC-F 08-09 1860-0055
450SX-F 08-10 1860-0535
400/450/530XC-W,
EXC,SMR 09-12
MFRE1-0115 A
505SX-F 08 1860-0535
SUZUKI 2- STROKE
RM80/85 89-10, 12 MFRD1-0075
RM125 96-07
MFRD1-1025
RM250 96-08
MFRD1-1175
SUZUKI 4- STROKE
RM-Z 250 04-06 1860-0050
RM-Z 450 05-07
1860-0091 A
YAMAHA 2- STROKE
YZ80/85 93-12
MFRD1-1175
YZ125 96-12
MFRD1-1175
YZ250 96-12
MFRD1-0135
YAMAHA 4- STROKE
YZ250F 01-05
MFRE1-1013
YZ250F 06-08 1860-0033
YZ250F 09 1860-0538
YZ400/426 98-02 1860-0095
YZ450F 03-05 1860-0096
YZ450F 06-07
1860-0091 A
YZ450F 08-09
1860-0173 A
A - PACKING COMES FLAT, NOT PRE–ROLLED
AFTERMARKET EXHAUST RE-PACK CARTRIDGES 2-STROKE
LENGTH OF SILENCER SHELL
EXHAUST 19 CM (7.5") 23 CM (9") 25,5 CM (10") 29 CM (11.5") 33 CM (13") 41 CM (16")
BILL'S PIPES
250 RACE SILENCER - MFRR2-0009E MFRR2-0010 MFRR2-0115 - -
DOMA
RACE SILENCERS MFRR2-0075E MFRR2-0009E MFRR2-0010 MFRR2-0115 - -
FMF
POWER CORE 2 / TITANIUM 2 MFRD1-0075 MFRD1-0875 - MFRD1-1175 MFRD1-0135 MFRD1-0016
TURBINE CORE 2* / Q TWO STROKE* MFRD1-0075 MFRD1-0875 - MFRD1-1175 MFRD1-0135 -
PRO CIRCUIT
R304 STD. / R304 RACE MFRR2-0075E MFRR2-0009E MFRR2-0010 MFRR2-0115 - -
296 SILENCER* MFRD1-0075 MFRD1-0875 - MFRD1-1175 MFRD1-0135 -
AFTERMARKET EXHAUST RE-PACK CARTRIDGES 4-STROKE
LENGTH OF SILENCER SHELL
EXHAUST 19 CM (7.5") 23 CM (9") 25,5 CM (10") 29 CM (11.5") 33 CM (13") 41 CM (16")
YOSHIMURA
RS-4 - - 1860-0537 - - -
CUT TO LENGTH PILLOWS FOR MOST
POPULAR AFTERMARKET MUFFLERS. FOR MUFFLERS WITH SHELL LENGTHS UP TO 15" FOR MUFFLERS WITH SHELL LENGTHS 15" TO 20"
UNIVERSAL COMPETITION PILLOW 1860-0573 1860-0574
UNIVERSAL SPEC 31 PILLOW 1860-0471 1860-0472
NOTE: PART NUMBERS GIVEN ABOVE ARE FOR UNMODIFIED AFTERMARKET EXHAUSTS. IF THE MUFFLER HAS BEEN MODIFIED FROM THE ORIGINAL LENGTH AND FALLS BETWEEN LENGTHS AVAILABLE ON THE CHART ORDER
THE NEXT LONGEST CARTRIDGE AVAILABLE FOR YOUR MUFFLER.
*SPARK ARRESTOR REPACKS
WHEN CHOOSING A REPACK KIT FOR A SPARK ARRESTOR SILENCER, SUBTRACT 5.5” FROM THE LENGTH OF THE MUFFLER BODY FOR THE ACTUAL PACKABLE LENGTH AND ORDER BASED ON THAT LENGTH. EXAMPLE: A FMF
TURBINE CORE 2 WITH A 14” LONG BODY WILL HAVE AN 8.5” PACKABLE LENGTH. ORDER THE NEXT LONGEST LENGTH . USE THIS RULE FOR PRO CIRCUIT ALSO.
**CUT TO LENGTH UNIVERSAL PILLOWS
PART NUMBERS PROVIDED ABOVE ARE DESIGNED TO PACK ALL MUFFLERS WITH CORE DIAMETERS BETWEEN 1.75” - 2.25” AND SHELL CIRCUMFERENCES BETWEEN 12” AND 13.5”. MEASURE THE DISTANCE AROUND THE
OUTSIDE OF THE MUFFLER’S SHELL TO DETERMINE ITS CIRCUMFERENCE.
STRAIGHT SECTION HEAT SHIELD
° ° Uses the same carbon Kevlar® construction as custom molded
pipeguards and includes stainless steel mounting brackets
° ° The straight section heat shield is designed to fit over
the section of pipe that contacts your leg and boot
° ° Many aftermarket manufacturers leave out a heat
shield. Use ours before you ruin your gear
° ° Available in two sizes to fit virtually all
4-stroke headers on bikes and ATV’s
° ° Made in the USA
203
SIZE
PART#
152 MM (6") 1861-0148
203 MM (8") 1861-0147
RIDER
ARMOR
YOUTH
BAGS &
PACKS
BIKE
BODY
BIKE
CONTROLS
BIKE
SUSPENSION
BIKE
BRAKING
BIKE
DRIVE
BIKE
BEARINGS
BIKE
ENGINE
BIKE
ELECTRICAL
BIKE
EXHAUST
BIKE
WHEELS
ATV
BODY
ATV
CONTROLS
ATV
BRAKING
ATV
DRIVE
ATV
SUSPENSION
ATV
BEARINGS
ATV
ENGINE
ATV
ELECTRICAL
ATV
EXHAUST
ATV
WHEELS
GARAGE
PROMO
SIZING
CHART