Moose Racing 2015

BIKE EXHAUST
COMPETITION MUFFLER
PACKING
° ° The same low-weight, highquality
packing material used
in our re-pack cartridges
° ° Lighter, quieter, and
longer lasting than
fiberglass mat packing
° ° Resists breakdown up to
593° C (1100° F)
° ° 250 g bag works for most
2-stroke applications
° ° 500 g bag
re-packs most 4-stroke mufflers
° ° Available in 250, 500 and 750 gram bulk packs
° ° Made in the USA
SIZE
PART#
250 g M702
500 g 1860-0060
750 g 1860-0575
UNIVERSAL STAINLESS RE-PACK KIT
° ° Louder exhaust does not mean more horsepower
° ° Blown-out packing causes exhaust turbulence and
increased backpressure, which reduces horsepower
° ° Re-pack your silencer with
this pro-quality, three layer
packing system and restore
the power you’ve blown out
° ° Also great for getting in
compliance with new sound laws
° ° Kit contains 6 mm (¼") thick
152 cm x 51 cm (60" x 20") glass mat,
18 cm x 51 cm (7" x 20") stainless
wool, 20 cm x 51 cm (8" x 20")
stainless mesh, twelve 4,8 mm (3/16")
rivets, and full instructions
° ° Made in the USA
UNIVERSAL STAINLESS RE—PACK KIT 1860-0037
FIBERGLASS MUFFLER PACKING
° ° Repack blown-out silencers for more power & a quieter ride
° ° Long filament fiberglass made
especially for muffler packing
° ° Measures 27 cm x 41 cm (10 ½" x 16"),
more than enough to repack
virtually any 2-stroke silencer
° ° Resists breakdown up to
649° C (1200° F)
° ° Made in the USA
FIBERGLASS MUFFLER PACKING
EXHAUST WRAP
° ° Fiberglass cloth wrap available in black and tan
° ° Stable at temperatures up to 1093° C (2000° F)
° ° Insulates exhaust header pipes to protect
your machine from intense heat
° ° Generous size roll is enough to wrap
one long header or critical areas
on multiple exhausts
° ° Made in the USA
M701
SIZE
PART#
25 MM (1") X 15M (50') TAN 1861-0339
50 MM (2") X 15M (50') TAN M30050
25 MM (1") X 15M (50') BLACK 1861-0340
50 MM (2") X 15M (50') BLACK 1861-0341
VISIT WWW.MOOSERACING.COM FOR MORE OFF-ROAD CONTENT
SPEC 31 HIGH PERFORMANCE
MUFFLER PACKING
° ° Improved heat and chemical resistance
over competition muffler packing
° ° Resists breakdown up to 760° C (1400° F)
° ° Resists the damaging effects
of corrosive exhaust gasses
° ° Continuous fiber resists blowout
better than mat type packing
° ° More resistant to exhaust turbulence
created by noise reducing muffler inserts
° ° Perfect for high power, high heat
4-stroke applications
° ° Available in 500 and 750 gram bulk packs
° ° Made in the USA
500 g 1860-0177
750 g 1860-0576
MUFFLER PACKING PILLOW
° ° The latest in muffler packing technology
° ° Available with our Competition Muffler Packing
or our SPEC 31 High Performance
Muffler Packing
° ° Universal, easy to install
design
° ° Pillow can be trimmed
to length to fit off-road
muffler up to twenty
inches long
° ° Lasts 3-5 times longer
than traditional packing
and extends service to
30-40 engine hours
° ° Competition Pillows resist breakdown up to 593° C (1100° F)
° ° Spec 31 Pillows resist breakdown up to 760° C (1400° F)
° ° Comes with cap stuffer to fill packable end-caps
° ° Adhesive closure flap used to eliminate the need
to wrap the packing with tape or wire
° ° Available in 38 cm (15") and 48 cm (19")
° ° Made in the USA
SIZE SPEC 31 PILLOW COMPETITION PILLOW
38 CM (15") 1860-0471 1860-0573
48 CM (19") 1860-0472 1860-0474
MUFFLER CORE SLEEVE
° ° Two-layer wrap consists of 304 stainless wire cloth
and a very durable, high-temp stainless steel wool
° ° Keeps engine performance and sound levels
more consistent compared to packing
fiber directly around the core
° ° Available in 38 cm (15") and 48 cm (19")
and can be easily trimmed with
scissors for shorter mufflers
° ° Both lengths are designed to
fit cores from from 44 mm (1-3/4") to
54 mm (2-1/8")
° ° Stainless steel ties are
included to secure the wrap
in place around the core
° ° Increase intervals between
re-packs by 3 to 5 times
° ° Works great with the Moose Racing Packing Pillow
° ° Made in the USA
SIZE
PART#
38 CM (15") 1860-0473
48 CM (19") 1860-0474
204