Moose Racing 2015
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
APPAREL<br />
RIDER<br />
ARMOR<br />
YOUTH<br />
HEAT SHIELD<br />
° ° Aluminized heat barrier with adhesive backing<br />
° ° Foil-coated fiberglass cloth adheres to body panels to<br />
protect plastic or fiberglass from engine or exhaust heat<br />
° ° One 46 cm x 46 cm (18" x 18") sheet provides 2088,5 cm 2<br />
(324 square inches) of superior heat protection<br />
° ° Also available in a long narrow strip, sized 3,8 cm x 91,5 cm<br />
(1.5" x 36")<br />
° ° Made in the USA<br />
SIZE<br />
PART#<br />
46 CM X 46 CM (18" X 18") M30051<br />
3,8 CM X 91,5 CM (1.5" X 36") 1861-0153<br />
SILICA EXHAUST TAPE<br />
° ° Designed to seal exhaust joint on the muffler when repacking<br />
or if needed where the muffler attaches to the header pipe<br />
° ° Effectively seals the exhaust system against<br />
vapor and engine residue leaks at couplings<br />
° ° Max operation temperature is 894° C (1800° F)<br />
° ° Woven silica tape<br />
° ° 7,6 mm thick , 25 mm wide and 203 mm length<br />
° ° Adhesive attached<br />
° ° 2 pieces included<br />
° ° Made in the USA<br />
SILICA EXHAUST TAPE 1861-0842<br />
BAGS &<br />
PACKS<br />
BIKE<br />
BODY<br />
BIKE<br />
CONTROLS<br />
BIKE<br />
SUSPENSION<br />
BIKE<br />
BRAKING<br />
BIKE<br />
DRIVE<br />
BIKE<br />
BEARINGS<br />
BIKE<br />
ENGINE<br />
BIKE<br />
ELECTRICAL<br />
BIKE<br />
EXHAUST<br />
BIKE<br />
WHEELS<br />
EXHAUST RIVET KIT<br />
° ° Have the right parts ready to complete the job<br />
° ° Steel rivets with corrosion resistant coating<br />
° ° Rivets designed to be pulled by a hand operated<br />
rivet gun, no air power needed<br />
° ° Rivet diameter 5 mm ( 3 /16") with a grip range of 3 mm (0.125")<br />
to 15 mm (0.6")<br />
° ° Kit includes 20 rivets and 1 properly sized 5 mm ( 3 /16") drill bit<br />
° ° Made in the USA<br />
EXHAUST RIVET KIT 1860-0176<br />
EXHAUST PLUGS<br />
° ° Keep your exhaust system clean from mud and<br />
water while your bike is being washed<br />
° ° Comes with a lanyard for easy removal<br />
° ° Available in two sizes for 2-strokes and 4-strokes<br />
SIZE<br />
PART#<br />
SMALL (2-STROKES) 1861-0556<br />
LARGE (4-STROKES) 1861-0557<br />
ATV<br />
BODY<br />
ATV<br />
CONTROLS<br />
ATV<br />
BRAKING<br />
ATV<br />
DRIVE<br />
ATV<br />
SUSPENSION<br />
ATV<br />
BEARINGS<br />
ATV<br />
ENGINE<br />
EXHAUST TAPE<br />
° ° High-temperature exhaust sealing tape with adhesive<br />
° ° Designed to seal exhaust joints on the muffler when repacking<br />
or if needed where the muffler attaches to the head pipe<br />
° ° Max operating temperature is 274° C (525° F)<br />
° ° Package includes two strips of tape, each measure 5 mm thick,<br />
25 mm wide and 203 mm length<br />
° ° Made in the USA<br />
EXHAUST TAPE<br />
M703<br />
205<br />
STAINLESS STEEL CABLE TIES<br />
° ° Perfect for high-temperature applications<br />
° ° Ball bearing and barb fastening assembly<br />
locks tightly and will not slip<br />
° ° Use anywhere a normal cable tie isn’t strong<br />
enough or can’t take the heat<br />
° ° Two lengths available, sold in packs of five<br />
° ° Made in the USA<br />
SIZE<br />
PART#<br />
20,5 CM (8") 2120-0144<br />
35,5 CM (14") 2120-0145<br />
ATV<br />
ELECTRICAL<br />
ATV<br />
EXHAUST<br />
ATV<br />
WHEELS<br />
GARAGE<br />
PROMO<br />
SIZING<br />
CHART
Change language