Compressor - ThermaSys

Dimensions (approximate envelope)
AHP
Connection Port
2 places
AIR
FLOW
Connection Port
2 places
AHPH
Connection Port
2 places
AHP / AHPH
Height
Inlet
Height
AIR
FLOW
Outlet
Connection
Port
2 places
Width
Depth
Width (over brackets)
Depth
porT RECOMMENDED
AHP AHPH CONNECTION OPTIONAL
HEIGHT widTH depTH HEIGHT widTH DEPTH siZE SEPARATOR
Model Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm NPT Model Number
AHP(H)-400 34.20 869 26.22 666 17.96 456 19.95 507 22.45 570 17.48 444 2.00 S-600M
AHP(H)-725 34.20 869 34.10 866 22.37 568 24.37 619 30.17 766 20.86 530 2.00 S-600M
AHP(H)-950 36.01 915 40.78 1036 26.78 680 28.82 723 35.89 912 22.69 576 3.00 S-1700M
AHP(H)-1200 36.01 915 44.73 1136 26.78 680 28.82 732 40.31 1024 24.07 611 3.00 S-1700M
AHP(H)-1600 36.01 915 44.73 1136 34.89 886 36.89 937 40.31 1024 25.45 646 3.00 S-2600M
AHP(H)-2000 36.01 915 54.58 1386 37.88 962 39.53 1004 48.29 1227 26.77 680 4.00 S-2600M
AHP-2500 36.01 915 52.61 1336 43.70 1110 — — — — — — 4.00 S-2600M
AHP-3000 36.01 915 54.58 1386 52.52 1334 — — — — — — 4.00 S-2600M
AHP-3500 36.01 915 54.58 1386 56.30 1430 — — — — — — 4.00 S-2600M
Motor & Fan Data
approx.
Full shipping Sound
AIR MOTOR
Fan motor load nema Thermal Weight dB(A) PSI 1 CFM 2
Model CFM (CMM) HP (KW) Voltage Phase Amps Hz RPM Frame Overload Lbs. (Kg) at 3 ft (BAR) (CMM)
AHP(H)-400
AHP(H)-725
AHP(H)-950
AHP(H)-1200
2200 (62.3) 1.0 (.75) 115/208-230 1 6.0 60 3450 56C No 120 (54) 97 60 (4.14) 50 (1.42)
1825/2200 (51.68/62.3) 1.0 (.75) 208-230/460 3 3.6/3.2 50/60 2850/3450 56C No 120 (54) 97 60 (4.14) 50 (1.42)
3600 (101.94) 1.5 (1.12) 115/208-230 1 8.5 60 3450 56C No 170 (77) 100 85 (5.86) 65 (1.84)
3025/3600 (85.66/101.94) 1.5 (1.12) 208-230/460 3 4.8/4.2 50/60 2850/3450 56C No 170 (77) 100 85 (5.86) 65 (1.84)
4700 (133.09) 1.5 (1.12) 115/208-230 1 8.6 60* 1740 145TC No 330 (150) 92 60 (4.14) 55 (1.56)
4700 (133.09) 1.5 (1.12) 208-230/460 3 4.6 60* 1740 145TC No 330 (150) 92 60 (4.14) 55 (1.56)
7000 (198.22) 5.0 (3.73) 230 1 23.0 60* 1740 184TC No 450 (204) 94 70 (4.83) 100 (2.83)
7000 (198.22) 3.0 (2.24) 208-230/460 3 8.8 60* 1740 182TC No 450 (204) 94 70 (4.83) 100 (2.83)
AHP(H)-1600 9700 (274.67) 5.0 (3.73) 208-230/460 3 13.4 60* 1740 184TC No 515 (234) 96 100 (6.89) 180 (5.10)
AHP(H)-2000 11000 (311.49) 7.5 (5.59) 230/460 3 19.6 60* 1740 213TC No 600 (272) 98 90 (6.21) 230 (6.51)
AHP-2500 14000 (396.44) 7.5 (5.59) 230/460 3 24.8 60* 1740 213TC No 625 (284) 98 90 (6.21) 230 (6.51)
AHP-3000 17500 (495.54) 10.0 (7.46) 230/460 3 24.8 60* 1740 215TC No 645 (293) 102 100 (6.89) 275 (7.79)
AHP-3500 17500 (495.54) 10.0 (7.46) 230/460 3 24.8 60* 1740 215TC No 750 (340) 102 100 (6.89) 275 (7.79)
All motors shown are TEFC. Other motor options available upon request. Published electrical ratings are approximate, and may vary because of motor brand. Actual ratings are on motor nameplate.
Fan motors must not be cycled. Outdoor applications must be protected from direct weather. If ductwork or additional static resistance is added to the cooler airstream, an auxiliary air mover
may be required.
*3 phase motors available in 50Hz. Reduce performance by 10%.
1
Air inlet to the air motor must be regulated to this pressure.
2
CFM (Free Air) consumption of the air motor. Lubrication = One drop of oil for every 50-75 CFM (1.42-2.12 CMM) of air going through the motor. Use detergent SAE #10 oil. Filter, regulator and lubricators
for the air motors are required, but not included.