Reference Standards Calibration Blocks - PH Tool

CERTIFICATION REPORT
CUSTOMER: SAMPLE CO., INC. DATE: 10/15/2010
SERIAL NO: ABC1886 ITEM: PRATT & WHITNEY ULTRASONIC STANDARD PO NO: 4313768
MATERIAL: ALLOY 600 SIZE: .750” OD x .049” MIN. WALL x 60” LONG
APPLICABLE SPECIFICATION: P.W.A. SP-SIM4; SIM4E; SIS26B
MEASURING TECHNIQUE USED: NIST TRACEABLE EQUIPMENT USED /TEST NO:
XX REPLICATION XX VIDEO MEASUREMENT SYS 821/262115-99
DIRECT MEASUREMENT DIAL INDICATOR 821/271608-05
OTHER MICROMETER 821/271608-05
GAGE BLOCKS 821/271608-05
26
Manufactured in accordance with Quality Assurance Program Revision 2 dated 1/15/08 that
complies with MIL-Q-9858A, 10CFR50 App B, ANSI N45.2, ASME Sec III Div 1 and MIL-I-45208A.
.750
12
14
#2
#1
60
NOTCH No. TYPE DEPTH WIDTH LENGTH LOCATION ORIENTATION
1 U 0.0048 0.0045 0.182 OD LONGITUDINAL
2 U 0.0047 0.0046 0.182 ID LONGITUDINAL
3 U 0.0047 0.0044 0.120 OD TRANSVERSE
4 U 0.0048 0.0048 0.120 ID TRANSVERSE
IT IS CERTIFIED THAT THIS REFERENCE STANDARD HAS BEEN MANUFACTURED IN ACCORDANCE WITH
APPLICABLE SPECIFICATIONS AND INSPECTED WITH INSTRUMENTS CALIBRATED IAW MIL-STD-45662
(LATEST REV.), ISO 10012-1 AND ANSI/NCSL Z540-1 USING MASTER GAGE BLOCKS AND MICRORULE MASTER
SCALES DIRECTLY TRACEABLE TO THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (NIST).
SAMPLE ONLY
AUTHORIZED SIGNATURE _____________________________________________________________
PHILIP R. HERMAN, QA MANAGER
4406 BETHLEHEM PIKE, TELFORD, PA 18969 USA
T: 267-203-1600 · F: 267-203-1601 · www.phtool.com
This Certification Report shall not be reproduced except in full, without the written approval of PH TOOL.
#3
#4
12
14
.049
DIMENSIONS IN INCHES
Page 1 of 1