Solenoid Valve <strong>for</strong> General Use with Isolating Diaphragm Type 330 <strong>Technical</strong> <strong>Data</strong> Circuit Function T 3/2-way valve, (Universal function) 2 1 3 Body Material Body and seat brass or stainless steel 1.4401 Specifications Orifice Kv-Value 1) QNn-Value 1) Pressure Range Pressure Range Weight DN Water Air 2) Vacuum version [mm] [m 3 /h] [l/min] [bar] [bar] [kg] 2 0,11 120 0 - 12 0,40 3 0,16 175 0 - 8 0,40 4 0,22 240 0 - 4 0 - 3 0,40 1) Flow rate reduced by 20 % with direct current operation, 2) Measured with 6 bar upstream pressure and 1 bar pressure drop across the valve at +20 °C, All pressures quoted are gauge pressures with respect to the prevailing atmospheric pressure. Seal Materials / Fluids Handled / Temp.-Range NBR Operating <strong>Data</strong> (Valve) Neutral fluids, e.g. <strong>com</strong>pressed air, town gas, water, hydraulic oil, oils and fats without additives 0 to +90 °C Operating <strong>Data</strong> (Actuator) Operating voltages Voltage tolerance ±10 % 24, 110, 220, 240 V/50 Hz, 24 V/= (other voltages on request) EPDM FPM Oils and fat-free fluids, e.g. hot water alkaline washing and bleaching lyes -30 to +90 °C Hot air, oxygen, per-solutions, hot oils with additives -10 to +90 °C Power consumption Duty cycle AC 30 VA (inrush), 5 VA/8 W (hold) DC 8 W 100% continuously rated For more detailed in<strong>for</strong>mation please refer to resistance chart (Leaflet-No. 1896009). Max. ambient temperature +55 °C Max. viscosity 37 mm 2 /s Response times opening closing AC: 8-15 ms, DC: 10-20 ms AC: 8-15 ms, DC: 10-20 ms Cycling rate Rating with cable plug IP 65 Installation / Accessories Installation approx. 1000 c.p.m. as required, but preferably with solenoid system upright Times measured at outlet A, from switching on until pressure rise to 90 % / pressure drops to 10 % at a max. working pressure of 6 bar. Electr. connection cable plug <strong>for</strong> 7 mm ø (supplied as standard)
Type 330 Dimensions in mm Standard version Valve with electrical feedback signaller Type 1060 (on request) G 1/4 G 1/4 9 9 4 threads underneath M4 - 8 deep sealed screws