GC and GC/MS Agilent MS Certified Liners Inlet Liners - T.E.A.M.

Inlet Liners
NEW!
Agilent MS Certified Liners
MS certified split liner, 5188-6576
Agilent MS Certified Split and Splitless Liners are manufactured and tested to our highest level
of scrutiny to assure reproducibility.
We have built years of experience into the MS Certified Liners to provide the quality and
consistency needed for critical applications, especially those using esterification agents for
trace level analysis such as toxicology or drugs of abuse applications.
• Geometrical dimensions and tolerances of the glass are controlled by Statistical Process
Control (SPC) with 100% Go-No-Go check.
• Glass wool is pre-qualified with mass spectrometry, then inserted using a unique
manufacturing procedure to improve reproducibility.
• Deactivated MS Certified Liners are treated with Agilent's proven proprietary deactivation
process developed to last longer than other commercially available treatment.
• Random samples of MS Certified Liners are tested using both FID and MSD analysis of
challenging probes to evaluate acid/base deactivation, response linearity, peak symmetry,
and bleed and background noise.
• Each Agilent MS Certified Liner is traceable by the lot codes silk screened on the liner.
Agilent MS Certified Liners
Description 1/pk 5/pk 25/pk
Split Inlet Liners
Single taper, MS certified liner with restriction to 5188-6576
hold glass wool
Straight, MS certified liner with glass wool 5188-6574 5188-6569
Splitless Inlet Liners
Single taper, MS certified liner with glass wool 5188-6568 5188-6567 5188-6566
GC and GC/MS
For in-depth information about maintaining your GC/MS, request
"Maintaining Your Agilent GC and GC/MS Systems" from your
Agilent Representative (publication number 5989-7612).
www.agilent.com/chem/supplies
153

Inlet Liners
Agilent Split Liners
Agilent split liner
Agilent Single Taper Split Liners are made to strict dimension specifications for optimal inlet
performance and feature the tightest tolerances for OD, ID, taper, and glass wool placement.
For ease of use and reproducibility, the liners have a positioning bead, a restriction to secure
the position of the glass wool, and a feature to consistently self-position to the recommended
height. The liners also feature Agilent's proprietary deactivation.
Agilent Split Liners
Single taper split liner
Straight split liner
Description 1/pk 5/pk 25/pk
Single Taper Split Liners
Single taper, glass wool, deactivated,
5183-4647 5183-4701 5183-4702
low pressure drop
Single taper, MS certified liner with restriction 5188-6576
to hold glass wool
Single taper, glass wool, deactivated 5183-4711 5183-4712 5183-4713
Straight Split Liners
Straight, glass wool, non-deactivated 19251-60540 5183-4691 5183-4692
Straight, MS certified liner with glass wool 5188-6574 5188-6569
GC and GC/MS
Tips & Tools
Agilent recommends part number 5183-4647 as the top split liner choice for:
• Highest run-to-run area reproducibility
• Least discrimination for wide boiling point range samples
• Use with widest range of conditions and sample types
• Easy self-adjusting installation
154
www.agilent.com/chem/supplies

Inlet Liners
Agilent Splitless Liners
Agilent's proprietary deactivation is important for splitless liners because of the longer
sample/liner contact time in splitless mode.
Agilent splitless liners
When deciding between a liner with or without glass wool, choose a liner without glass wool
if your sample contains non-volatiles or analytes within a wide boiling range. For unknown
samples, use a liner without glass wool to avoid loss of active or labile compounds. Agilent
recommends first trying a liner without glass wool; use glass wool as a second choice.
Single taper splitless liner
Single taper, glass wool splitless liner
Double taper splitless liner
Agilent Splitless Liners
Description 1/pk 5/pk 25/pk
Single taper, deactivated 5181-3316 5183-4695 5183-4696
Single taper, inert 5181-3316i
Single taper, glass wool, deactivated 5062-3587 5183-4693 5183-4694
Single taper, MS certified liner with glass wool 5188-6568
Double taper, deactivated 5181-3315 5183-4705 5183-4706
Straight, deactivated, quartz 5181-8818 5183-4703 5183-4704
Straight, non-deactivated, quartz 18740-80220 5183-4707 5183-4708
Straight, non-deactivated 210-3003 210-3003-5
Direct Connect Liners
Direct Connect liners
Agilent's Direct Connect Liners provide maximum recovery and minimal decomposition of
active compounds for methods requiring splitless injection, such as EPA 8270. They are best
for relatively clean samples containing active analytes, such as water extracts. The liners
directly connect with the column, similar to press-fit connectors, to aid complete transfer
of sample onto the column, eliminating the problem of inlet discrimination and further
increasing sensitivity.
Direct Connect Liners
Description
Part No.
Single taper, Agilent proprietary deactivation G1544-80730
Dual taper, Agilent proprietary deactivation G1544-80700
Single taper, deactivated, inert G1544-80731
GC and GC/MS
www.agilent.com/chem/supplies
155

Inlet Liners
NEW!
Helix Liners
Helix liners
Helix liners approximate the benefit of glass wool without the activity. The deactivated glass
spiral gives surface area without glass wool's active sites to vaporize and mix sample before
getting onto the column, and prevents sample from splashing onto the bottom of liner and
seal. Helix liners are recommended for slower injection speeds.
Helix Liners
Description
Part No.
Helix open ended, deactivated 5188-5396
Helix double taper, deactivated 5188-5398
Helix single taper, deactivated 5188-5397
Liner O-Rings
• Liners are sealed in the inlet with O-rings or graphite seals
• Graphite seals are used when inlet temperatures exceed 350°C
• Fluorocarbon O-ring seals are easier to replace than graphite that deforms and flakes apart
Liner O-rings in dial packaging
Only Agilent fluorocarbon liner O-rings are:
GC and GC/MS
• Pre-cleaned, then conditioned to eliminate out-gassing of contaminants, especially
important for trace, ECD and MSD analyses
• Plasma treated for a non-stick, contaminant-free surface that won’t stick to the inlet metal
surface creating unnecessary inlet maintenance
• Packaged for convenience and cleanliness in a novel dial package that delivers 1 clean
O-ring, ready for use
Liner O-Rings
Description Unit Part No.
Certified non-stick fluorocarbon O-ring 10/pk 5188-5365
Graphite O-ring for splitless liner 10/pk 5180-4173
Graphite O-ring for split liner 10/pk 5180-4168
Non-Stick fluorocarbon liner O-ring for Flip Top 10/pk 5188-5366
High Temp PTV inlet liner fluorocarbon O-ring 10/pk 5188-5311
156
www.agilent.com/chem/supplies