Timer, Counter Analyser - Aspen Electronics

CNT-90
Rear Panel
Connections
Auxiliary
Functions
External Start
& Stop Arming
Reference Input
Reference Output
Arming Input
Rear Panel Input
Modes
Input Channels
Maximum Repetition Rate
Start Time Delay Range
1, 5 or 10MHz; 0.1 ~ 5Vrms
10MHz; >1Vrms sine into 50Ω
Arms all measurement functions
Optional A, B, C input on rear
Start, Stop & Start & Stop arming
A, B or E
Channel A, B: 160MHz
Channel E: 80MHz
20ns ~ 2s, 10ns resolution
Trigger Hold-off
Time Delay Range
20ns ~ 2s, 10ns resolution
Statistics
Functions
Display
Sample Size
Measurement Pacing
Minimum, Maximum, Mean, Delta, Max-Min,
Standard Deviation & Allan Deviation
Numeric, Histograms or Trend Plots
2 ~ 2 x 10 9 samples
Time range: 2ms ~ 1000s
Mathematics
Functions
(K*X+L)/M & (K/X+L)/M.
Where X is reading and K, L and M are user definable constants
Other Functions
Measuring Time
Time Base Reference
Display Hold
Limit Values
Limit Alarm
Display
Setup Memory
Display Digits
Resolution
GPIB Interface
Internal Memory Size
USB Interface
20ns ~ 1000s for frequency, burst and period average
Single cycle for other measurement functions
Internal, External or Automatic
Freezes result until a new measurement is initiated via restart button
Lower and upper limits
Graphical indication on display and / all SRQ via GPIB
Numeric & graphics
20 memories for instrument setup
14 digits in numerical mode
320 x 97 pixels
Compatibility: IEEE 488.2 compatible. 53131A emulation mode
Maximum measurement rate via GPIB: 2k readings/s
Maximum measurement rate to internal memory: 250k readings/s
750k reading
USB 2.0, up to 11Mb/s
Physical
Power Requirements
Dimensions
Weight
Basic Version: 90 ~ 265Vrms, 45 ~ 440Hz,