Airport CDM Processes for Adverse Conditions
Airport CDM Processes for Adverse Conditions
Airport CDM Processes for Adverse Conditions
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Airport</strong> <strong>CDM</strong> <strong>Processes</strong> <strong>for</strong> <strong>Adverse</strong> <strong>Conditions</strong><br />
6 PROCESSES<br />
This chapter will contain the resulting processes after a mapping is made from the<br />
operational consequences and their impact on the key parameters. The processes described<br />
below are only example processes, presented in the <strong>for</strong>mat of the Generic <strong>Processes</strong> <strong>for</strong><br />
<strong>Airport</strong> <strong>CDM</strong>, as agreed by the <strong>Airport</strong> <strong>CDM</strong> Procedures Group meeting in 2009.<br />
The Timeline <strong>for</strong> development of this chapter is expected to be <strong>for</strong> the second half of 2010,<br />
however may be taken over by SESAR IP2, work package 6.6.2.<br />
6.1 METEO<br />
6.1.1 <strong>Processes</strong> Applicable in Fog <strong>Conditions</strong><br />
6.1.1.1 Process <strong>for</strong> Weather Status: Change to Fog <strong>Conditions</strong><br />
This Milestone is Highly Recommended<br />
Objective<br />
First step: To in<strong>for</strong>m all relevant <strong>Airport</strong> <strong>CDM</strong> partners of Status Fog <strong>Conditions</strong> in the <strong>Airport</strong><br />
<strong>CDM</strong> plat<strong>for</strong>m.<br />
Fog<br />
<strong>Conditions</strong><br />
Update<br />
<strong>Airport</strong> <strong>CDM</strong><br />
Plat<strong>for</strong>m<br />
In<strong>for</strong>m All Partners<br />
Second step: To check if all parameters have been modified according to Fog <strong>Conditions</strong>.<br />
Fog Condition<br />
Forecast Time<br />
Condition Values Check<br />
Are parameters modified at<br />
<strong>for</strong>ecast time + tolerance<br />
Tolerance value of e.g. + 10 minutes<br />
No<br />
Generate<br />
Alert<br />
Message<br />
Yes Do Nothing<br />
In<strong>for</strong>m partners<br />
Description<br />
In<strong>for</strong>m of fog conditions when it occurs or <strong>for</strong>ecasted. In case relevant parameters are not<br />
adjusted to these winter conditions, all relevant partners should be in<strong>for</strong>med, and <strong>CDM</strong><br />
plat<strong>for</strong>m and planning parameters updated to default fog condition values.<br />
Trigger<br />
Setting of fog conditions<br />
Meteorological <strong>for</strong>ecast report<br />
Pre-condition<br />
Page 38 Working Draft Edition Number: 009
Change language