BUGGYPOD COMPATIBILITY Buggypod io Buggypod Smorph 2

Buggypod Smorph 2:
compatibility Buggypod io & Smorph
You cannot fit a bracket around two parallel telescopic tubes, as the tubes may slide alongside each other or split apart when folding pushchair
(e.g. Bebeconfort Loola).
You can fit the bracket on one telescopic tube if there is a gap of minimum 2 mm between the tubing (e.g. Mamas and Papas Pliko).
Check that the mounting brackets, once fitted, do not interfere with the braking system or folding mechanism of the host pushchair.
Check that the tube to which you are fitting the bracket is vertical (looking from the rear or front), so that the bracket and Buggypod will sit vertically too.
The front bracket can be fitted slightly higher than the rear bracket if it helps achieve a good connection.
The Buggypod seat will then tilt back gently (as with many pushchairs) and you may in any case prefer that.
You may find it helpful to look at the images of the Buggypod attached to a number of pushchair models in the Support pages at www.buggypod.com.
If you are still unsure about whether the Buggypod will fit your pushchair, you can call our Helpline in the UK
on 0870 850 3463 (M-F, 09:30-17:00) or email us at support@revelo.co.uk and we shall endeavour to help you. .
Your local retailer may also be able to advise on fitting.
28