HOT WATER OUR ELEMENT - Stiebel Eltron

HOT WATER RENEWABLES CENTRAL HEATING 

HOT WATER 

OUR ELEMENT 

ISSUE 03|2008 

» INSTANTANEOUS WATER HEATERS 

» WATER BOILERS 

» SMALL WATER HEATERS 

» WALL MOUNTED WATER HEATERS 

» FREESTANDING DHW CYLINDERS 

» HAND DRYERS

CONTENTS 

Quality is not a matter of chance 03 

Saving water and energy 04 

Our Products 

» Instantaneous water heaters 06 

Fully-electronic instantaneous 

water heaters 08 

Electronic instantaneous 


Hydraulically controlled 

instantaneous water heaters 13 

Mini instantaneous 


» Water boilers 16 

» Small water heaters/Taps 18 

» Wall mounted water heaters 26 

» Freestanding DHW cylinders 32 

» Commercial products 38 

Hand dryers 40 

Automatic water boilers 42 

Instantaneous water 

heater cylinders 42 

Freestanding 

DHW cylinders 43 

» Specifi cation 44

QUALITY IS NOT A MATTER OF CHANCE 

STIEBEL ELTRON has been synonymous with convenient household appliances since 1924. 

Today, as back then, we develop products of the highest quality and with advanced 

functionality. We combine innovative technology, reliable quality and partner-based 

customer service for branded products in the best tradition. Our unconventional 

thinking and our practical inventions, which have defined whole markets, have always 

been the most important capital in our business. Today, we deploy the same enthusiasm 

in the development of optimised solutions for the future as we did when we designed the 

products currently on the market. The way we do business today is also characterised 

by our unwillingness to rest on our laurels or choose the easy way out. Common to all 

products bearing the STIEBEL ELTRON name is our goal of developing, manufacturing and 

selling products and advanced systems in the faultless quality the demanding market 

requires. We think that only in this way can technical products truly perform to their 

optimum capability. 

HOT WATER RENEWABLES CENTRAL HEATING 

Performance as a matter of principle | STIEBEL ELTRON supply 

comfortable solutions all around the areas of water heating, renewable 

energies and central heating. With numerous individual components 

and complex system solutions, we help to make everyday life that little 

bit more comfortable. When considering the technology which is the 

best for you, you should take into account how all of the components 

in your entire living space interact with each other. Whether you 

choose a single component or a complete system, with our highquality 

products we can guarantee that STIEBEL ELTRON technology 

will always help you to feel more comfortable in your home. This 

brochure is designed to show you how we apply innovation with real 

understanding when it comes to domestic hot water systems. 

02 | 03

SAVING WATER AND ENERGY 

WITH TOTAL COMMITMENT 

More efficient water usage | Today, hot 

water is largely taken for granted. Tailormade 

solutions from STIEBEL ELTRON help 

you to lower your domestic hot water bills. 

The amounts of energy required to heat 

water varies enormously. Individual habits, 

the conditions in each house, and technical 

equipment make all the difference. 

Even a modern centralised domestic hot 

water system is ineffective if the hot water 

has to travel long distances. A large part 

of the energy is then wasted in the form of 

The quickest way to save | The high 

effi ciencies of gas or oil fi red systems almost 

always 'end up in smoke' due to their long 

supply lines. This is one of the disadvantages 

of centralised water heating systems. Even 

condensing boilers don't offer any scope for 

making further savings. Quite the opposite: 

According to experts, rocketing crude oil prices 

are expected to have a major impact on gas 

and fuel oil bills. It is also worth comparing 

systems based on their CO 2 emissions. Electric 

domestic hot water systems also fair much 

better here than is generally assumed. 

dissipated heat. This is especially the case if 

smaller amounts of water are used frequently. 

Heating the water directly at the point of use 

is simply more advantageous. 

With electric power against the tide | Energy 

bills and environmental issues provide 

stronger reasons than ever to use electric 

domestic hot water systems. After all, oil 

and gas prices have recently increased 

substantially. In this context, electric domestic 

hot water systems offer a sensible alternative. 

The top convenience, extraordinary quality 

CO 2 emissions per annum 

Electricity, decentralised 

Natural gas, centralised 

Heating oil, centralised 

0 200 400 600 800 1000 1200 1400 

kg CO2 per annum 

In terms of CO2 emissions, a local electrical warm water system comes out on top. 

The above consumption figures are based on a 3-person household | HEA 2007 (Germany) 

DHW losses per metre pipework 

1.6 l 

874 

3.2 l 

1,043 

1,333 

4.8 l 

and high effi ciency of our heaters offer you 

that little bit more. Discover for yourself, at 

your own leisure, the best way STIEBEL ELTRON 

solutions can benefi t you in your home. 

5 metres of pipe 



0 1 2 3 4 5 Water (litres) 

Shorter distances save you money. Local water heating is very economical due to the short 

pipe run. Based on a copper pipe, 22 mm in diameter.

Comparison of energy demands 

1,365 

1,660 

Basis: Detached house, 3 persons | HEA 2007 (Germany) 

3,837 

0 500 1000 1500 2000 2500 3000 3500 4000 kWh/a 

On balance, greater effi ciency | Frequently, the real level of energy 

effi ciency is only discovered at the end of the year. Only then do the 

many cost factors, such as the domestic hot water circulation pump 

used in centralised systems, appear in the year-end bill. These are 

seldom marked down as domestic hot water costs. If you also take 

One instantaneous water heater, one small water 

heater and one small instantaneous water heater to 

the draw-off point in your home 

Electric DHW cylinder, 100 l close to the draw-off 

point in your home 

Central DHW cylinder (oil/gas heating systems) in 

the cellar with DHW circulation 

Heat consumption 

(1200 kWh/a) 

Heat loss 

into account hidden cost factors, electrical domestic hot water systems 

often fair better than centralised oil or gas fi red systems. In particular, 

decentralised electric domestic hot water systems offer even more 

benefi ts – they are practically maintenance-free and enable you to 

make simple, consumption-based cost calculations. 

04 | 05

INSTANTANEOUS WATER HEATERS 

CONVENIENCE THE EASY WAY 

An instantaneous water heater can deliver hot water in many different ways. Either 

under hydraulic, electronic or fully electronic control. Whatever solution you choose 

– instantaneous water heaters from STIEBEL ELTRON can meet any demand. Equally 

suitable for very soft or very hard water areas. One thing all models have in common: 

All our instantaneous water heaters are very energy-efficient, offer a long service 

life and are extremely convenient.

FULLY ELECTRONIC INSTANTANEOUS 

WATER HEATERS 38.5°C 100% COMFORT 

The business meeting today put me through an emotional roller coaster. At first, both 

parties were really on edge. But finally, when the ice was broken, negotiations started to 

roll. When I got home I had to get straight into the shower. The water soothingly massages 

my neck – at just the right temperature. Hot water at first, then slightly cooler, and 

then hotter once more. All at one touch of a button, just the way I like it. A sensuous 

torrent of water runs down my back. I just love this particular shower program. I feel my 

shoulders relax. My skin tightens up slightly, and all the stress softly ebbs away. I feel 

I've earned this little bit of luxury. After all, today we managed to win a new customer.

Wireless comfort remote control 

That quality moment | The DHE electronic comfort unit provides water 

controlled to the nearest degree. Allow its four functions for good health 

to pamper you thoroughly. Thanks to its intelligent fully-electronic 

control, water is always available at exactly the required temperature. 

On top of that, water and energy savings of up to 20 % can be made, 

compared to hydraulically controlled instantaneous water heaters. Any 

fl uctuations in pressure and temperature are actively compensated. 

For maximum user convenience, you also get a hard-wired remote 

control, or alternatively, a wireless remote control unit. This allows you 

to control the DHE electronic comfort system from a different room. 

Even installation is amazingly convenient: The unit fi ts in everywhere 

– and it can be mounted over or undersink. 

DHE SLi electronic comfort 

18 kW, 18 / 21 / 24 kW selectable, 27 kW 

9.2 – 13.8 l/min (subject to model) 

Multifunction display 

Always the precise temperature required, from + 20 °C to + 60 °C 

The display shows the current water and energy consumption 

Economy function ECO, fl ow rate display 

Four shower programs for good health 

Child-proof system 

Electronic safety system with air detection 

Bare-wire heating system with unvented casing 

Hoseproof to IP 25 

08 | 09

INSTANTANEOUS WATER HEATER 

TEMPERATURE CONTROL WITH FEELING 

Pure pleasure | The DEL electronic LCD shows what it can do: Precise 

temperature control down to the nearest degree. You only need to 

turn the rotary selector until the required temperature appears in 

the LCD display – that's all. The electronically-controlled in stantaneous 

water heater captures the fl ow rate as well as the cold and 

hot water temperatures accurately and uses these details to regulate 

the output. It also compensates for wider pressure fl uctuations. The 

DEL electronic LCD unit maintains your required temperature right 

up to its performance limit. 

Which it continues to do even if something ever goes wrong: The unit 

can be installed directly in your shower cubicle. The DEL system is 

hoseproof to IP25 and also offers not only many economic advantages, 

but also space-saving installations inside the shower cubicle or 

above the bath. 

DEL SLi electronic LCD 

18 kW, 18 / 21 / 24 kW selectable, 27 kW 


Temperature LCD 

Always the precise temperature required, from + 30 °C to + 60 °C 


As option with wireless remote control 

For hard and soft water areas 

Saves up to 20 % water and energy compared to hydraulically 

regulated devices 

Bare-wire heating system with unvented casing 

Hoseproof to IP 25

Shower without cold shocks | The DHB-E electronic unit offers all 

the major comfort settings of any electronically-controlled instantaneous 

water heater. The actively-controlled output compensates 

for pressure fl uctuations in the water supply guaranteeing you a 

pleasant shower experience. Temperature fl uctuations or waiting 

"forever" for hot water to materialise are defi nitely a thing of the 

past. After all, the DHB-E electronic unit consumes up to 20 % less 

energy and water than hydraulically controlled units, thanks to its 

modern electronics. 

DHB-E Si electronic 

11 kW, 13 kW, 18 kW, 18 / 21 / 24 kW selectable, 27 kW 


Constant temperature up to the output limit, from 

approx. + 30 °C to + 60 °C 




10 | 11

Refreshingly frugal | The DHB thermotronic represents and interesting 

entry into the comfort class. It offers the output of an advanced 

electronic instantaneous water heater at the price of the lower middle 

segment. Its energy effi ciency and the convenience of always maintaining 

the pre-selected DHW temperature are amongst its primary 

benefi ts. Temperature fl uctuations caused by output changes are 

prevented. As a result, the shower experience will never lead to cold 

shocks. The DHB thermotronic therefore represents pleasant comfort 

without extravagance. 

Perfectly safe: The unit can be installed directly in the spray range in 

your shower cubicle. The DHB thermotronic is hoseproof to IP 25, and 

offers not only economic benefi ts, but also a space-saving installation 

inside the shower cubicle or above the bath. 

DHB STi thermotronic 

18 kW, 21 kW, 24 kW, 27 kW (subject to device) 

9.2 – 13 l/min (subject to model) 

Three-stage temperature pre-selection, approx. + 35, + 45, + 55 °C 

Individual temperature adjustment through mixing with cold water 

Constant water temperature up to the output limit 



Bare-wire heating system 

Hoseproof to IP 25

HYDRAULIC INSTANTANEOUS WATER 

HEATERS, EFFICIENCY IN SITU 

Convenience as standard | The DHH control is the new hydraulic 

instantaneous water heater with a shower comfort setting. This 

allows you, alongside the two performance settings, to adjust the 

water temperature directly at the unit. The fl ow control levels out 

most pressure fl uctuations. 

Wherever you wish to install your DHH control – below the basin 

or on the wall at eye-level – the user controls always remain easily 

and ergonomically within reach. As you would expect, the 

DHH control is hoseproof, which means you can also install it inside 

the shower cubicle. 

DHH Si control 

18 kW, 21 kW, 24 kW, 27 kW (subject to device) 


Two-stage temperature and output selection 

Shower comfort setting 




12 | 13

Pleasure on tap | The HDB hydraulic instantaneous water heater 

always fi ts. It is characterised by both its ease of installation and 

the simplicity with which it can replace an existing unit. Its fl ow rate 

regulation compensates for some pressure fl uctuations. Where less 

water is required, its output can be reduced to 50 %. 

HDB Si control 

18 kW, 21 kW, 24 kW, 27 kW (subject to model) 





All-in-one comfort | In diffi cult locations or where the thermal 

conductivity of the water is poor, it may be diffi cult to install an 

instantaneous water heater. Here, the DHF offers a real alternative. 

This hydraulically-controlled instantaneous water heater with twostage 

temperature selection offers maximum performance in the 

tightest of spaces. The control valve even compensates for most 

pressure fl uctuations in the water supply, automatically. 

DHF C compact control 

13.2 kW, 15 kW, 18 kW, 21 kW, 24 kW (subject to model) 



Optional installed in the shower area 

For soft water areas 

Tubular heating element with unvented casing 

Compact dimensions

MINI INSTANTANEOUS WATER HEATER 

STRONG STAND-ALONE PERFORMANCE 

Technology as you want it | Their compact 

size make the DNM and DHM units especially 

suitable for use under limited space conditions, 

either as a non-pressurised or a pressuretested 

version. Energy is only consumed when 

hot water is drawn. This makes these units 

ideal for draw-off points that are only used 

occasionally. 

Taps for the DNM | This range of low pressure 

taps with special spray regulator for an optimised 

spray pattern supplements the open 

vented DNM-Mini instantaneous water heaters, 

thus creating a single perfect unit. 

Twin-lever tap MAZ 

Single lever mixer tap MAE 

Wall mounted tap, oversink MAW 

Less is more | For example, when it comes to the water supply for your visitors' toilet. Mini 

instantaneous water heaters combine two benefi ts in one unit. Firstly, the convenience of a 

decentralised water supply. This means, that hot water does not need be transported through 

long supply lines. Secondly, the hot water delivery of the unit is just right for washing your 

hands. 

DNM 

For a single draw-off point 

3.5 kW, 4.4 kW, 5.7 kW (subject to model) 


230 V with connecting cable 


For non-pressurised installation with 

open taps 

Over and undersink installation 

DHM 

For one or several draw-off points 

3.5 kW, 4.4 kW, 5.7 kW (subject to model) 


230 V with connecting cable 


For pressure-tested installation with 

pressure-tested taps 

Undersink installation 

14 | 15

WATER BOILERS 

BRINGING WATER SAFELY TO THE BOIL 

Kitchens are needed for cooking | Whenever you need boiling 

water instantly, our water boilers are on hand. They allow this 

extremely hot liquid to be handled conveniently and without risk, 

after all, they can generally be operated just like a normal tap. 

There's no need for all that pouring and repouring when brewing 

large volumes of tea, for example. And thus you reduce the risk of 

scalding. But even small volumes – for a single cup, for example – 

EBK 5 GA automatic 

5-Liter-Glasbehälter mit Chromarmatur 

Kochpunkterfassung und Abschaltautomatik 

Stufenlose Temperatureinstellung 

discmatic ® EBK 5 GA automatic 

5 l glass container with chrome tap 

Boiling point sensor and automatic OFF control 

Infi nitely variable temperature selection 

discmatic -Flächenheizsystem 

230-V-Anschluss mit Schutzkontaktstecker 

® concealed element system 

230 V power lead with earthed plug 

are safely and cost-effectively brought to the boil. The discmatic ® 

concealed element ensures long-term high-effi ciency. This is due to the 

element being practically always under water. Water temperatures are 

variably adjustable, and the unit will switch off automatically once the 

required temperature has been reached, right up to boiling point. 

EBK 5 G automatic 

5 l glass container with white lever tap 



discmatic ® concealed element system 

230 V power lead with earthed plug

A great recipe | These water boilers are manufactured from a variety 

of materials such as glass or plastic, and come in a range of attractive 

designs. Sometimes in classic chrome, sometimes with a modern 

plastic-coated tap. 

EBK 5 K automatic 

5 l plastic container with white lever tap 



discmatic ® concealed element system 

230 V power cable with earthed plug 

16 | 17

SMALL WATER HEATERS 

HOT WATER WHEN YOU NEED IT 

Small water heaters free-up space in the kitchen. Both powerful and compact in design, 

these water heaters are an affordable source of hot water. Their cost-effectiveness is 

especially apparent when small volumes of water are frequently required. Their innovative 

thermostop technology and the highly effective insulation ensure minimum standby 

losses. The anti-drip function saves water and reduces limescale build-up on taps and 

basins. That helps to keep your sink and basin clean.

A REAL HELP IN KITCHEN 

AND BATHROOM 

Whoever said it's just a children's birthday party should come over and take a look! 

Pandemonium! Thankfully we are well stocked-up. Hot water is also always available. 

Before, it used to take ages, but now, simply turn on the tap and the water is hot, right 

from the first drop. This water heater always has warm or hot water in supply and refills 

automatically. What a red hot idea! I wish the fridge could chill things as quickly.

» dripstop | Prevents dripping during 

heat-up, saves water, reduces limescale 

build-up on taps, sink and basin. 

» thermostop | Saves energy and 

prevents mixer taps from being 

heated in standby mode. 

Small – but powerful | The small water heater, SNU 5 SLi dripstop 

comfort, convinces in many ways. The temperature inside the device 

can be infi nitely selected between + 35 °C and + 82 °C, enabling water 

of the same temperature to be drawn off at any time. The optional 

temperature limits, that can be set to 38, 45, 55 or 65 °C, act as antiscalding 

protection or can be utilised as economy steps. 

Easy operation | The exclusive mono-lever tap with retractable rinser 

head makes washing larger objects in your sink that much easier. 

The water volume and temperature can be easily adjusted with just 

one hand. In the form of the elegant bathroom version, the exclusive 

basin tap and small water heater create an ideal combination. Not 

only that, but one hand always remains free. 

SNU 5 SLi dripstop comfort | SNU 10 SLi comfort 

dripstop prevents dripping during heat-up, saves water and 

reduces limescale build-up on the tap (SNU 5 SLi) 

thermostop to prevent radiation losses 

when using mixer taps in standby mode 

5 or 10 l undersink water heater with 

2 kW or 1 kW (subject to model) 

Only 0.2 kWh standby loss per day (SNU 5 SLi) 

Active protection circuit for a safety installation 

For a single draw-off point 


Splashproof to IP 24 D 

20 | 21


ALL-IN-ONE COMFORT 

Perfect control | For assembly above the draw-off point, we recommend 

the SN or SH series of small water heaters, subject to whether you need 

to supply one or more draw-off points. These heaters are available 

with a capacity of 5 to 15 litres. The temperature can be infi nitely 

selected between + 35 °C and + 82/+ 85 °C, which means that water 

of that temperature is always on tap. The thermal cut-out provides 

a permanent, safety-fi rst maximum water temperature. This can 

SN 5, 10, 15 SLi comfort | SH 10, 15 SLi comfort 

SN: Open water heater with 5, 10, 15 l capacity (subject to model) 

SH: Sealed water heater with 10/15 l capacity (subject to model) 

2.0 – 3.3 kW (subject to model) 


Low stand-by consumption 


+ 60 °C economy setting 

be set to 38, 45, 55 or 65 °C. The highly effi cient insulation of these 

small water heater provides perfect thermal insulation at the lowest 

possible energy loss. With the MEK series of taps, the SN small water 

heaters make a winning team. The mono-lever mixer tap and swivel 

spout are very easy to use. This tap gives you the perfect handle on 

the open small water heater in your kitchen.

Heat on tap | The SHU series of small water heaters with 5 or 10 litres 

capacity is ideal for supplying multiple draw-off points. The rotary 

selector enables the temperature to be selected at the unit between 

+ 35 °C and + 82 °C. The thermal cut-out provides a permanent, 

safety-fi rst maximum water temperature. This can be set to 38, 45, 

55 or 65 °C. An indicator illuminates whenever the unit is in the 

heat-up phase. Regardless of which mode the small water heater is 

currently in, it will always generate the required water temperature 

on a continuous basis. 

SHU 5, 10 SLi comfort 

Water heater with 5/10 l capacity (subject to model) 

2.0 kW 


Stand-by consumption loss 0.31 / 0.36 kWh per day (subject to model) 

Temperature setting at the unit: + 35 °C to + 82 °C 


Active protection circuit for safety-fi rst installation 

(the high limit safety cut-out can be reset) 

Economy setting + 60 °C 

22 | 23

Gourmet kitchen | The UFP range of small water heaters are a real hit, 

offering strong performance in tight spaces. Wherever small amounts 

of hot water are required, these open water heaters supply a single 

draw-off point with running hot water. The infi nitely adjustable rotary 

selector enables a temperature selection between + 35 °C and + 85 °C 

at the unit. This small water heater provides around twice its capacity 

of warm mixed water at + 40 °C when heated to + 65 °C. 

UFP 5 t 

thermostop to prevent radiation losses 

when using mixer taps in standby mode 

5 l small water heater (open) | 2.0 kW / 230 V 

Stand-by consumption loss 0.23 kWh per day 


Also available as an oversink version (type UFP 5 h) 

Heater and tap from a single source | The WST-K tap and small 

water heater form a perfect unit. Its timelessly elegant design is an 

optimum fi t for the open small water heater. Its convenient temperature 

control system and high fl ow rate make it an ideal accessory for your 

kitchen sink.

WHAT A COMBINATION! 

It's all in the mix | A perfect hot water supply is the fi rst step 

towards greater comfort. The second step is fi nding the most 

suitable tap. The right combination brings both together to form a 

The MESB kitchen tap is ideal when used in combination with the 

small water heater. Its retractable rinser head makes it easy to wash 

larger objects. For this, the mono-lever mixer tap can easily be 

operated with your free hand. 

The attractive mono-lever MESL mixer tap creates an elegant link 

between aspirational design and high quality. The heavy brass version 

with its cast spout practically gushes with quality. 

perfect unit. The recommended taps harmonise perfectly with the 

devices from STIEBEL ELTRON. In addition, they make the hot water 

supply in your bathroom or kitchen a great deal more practical. 

The mono-lever mixer combines all of the 

characteristics required to produce an excellent 

tap. The solid brass version is particularly 

suitable for your kitchen sink. This beautifully 

designed water spout is also aesthetically 

pleasing. 

The classic mixer tap with its modern design 

is as much at home on your basin (WST) as 

it is on the kitchen sink (WUT). Their chrome 

metal handles and smooth surfaces look 

good wherever they are used. 

24 | 25

WALL MOUNTED WATER HEATERS 

LUXURIATE IN COSY WARMTH 

Wherever large volumes of hot water are required, STIEBEL ELTRON water heaters are 

on hand with the required volume. With capacities ranging from 30 to 150 litres highly 

efficient thermal insulation and reliable technology, these cylinders constantly ensure 

the desired quality of hot water in the bathroom, for small and very large volumes 

alike. These wall mounted water heaters are a real hit thanks to their optimum levels of 

efficiency and flexibility, not forgetting the option of running them in open or sealed 

systems. These water heaters also leave no question unanswered when it comes to a 

long service life, thanks to their top quality materials, processing technology, special 

"anticor" enamel finish and active anti-corrosion protection.

A BATH FOR TWO 

At last, it's the weekend. First, do a few chores, then we can take a wonderful bath together. 

Today we really need some relaxation. Thankfully now, hot water doesn't travel as far 

as it used to. It used to take ages. But these days, the tub fills up amazingly quickly. 

I couldn't resist jumping in. It's so wonderfully warm and relaxing. All that stress dissolves 

in the hot water and gradually ebbs away. Soon we'll feel refreshed and ready for the 

rest of the evening. Maybe then we can find something else to do that is spontaneous 

and fun!

Comfort on demand | The SHZ series of wall mounted water heaters 

deliver hot water constantly to your home. These cylinders are available 

in six different sizes, between 30 and 150 litres. They all have a keypad 

on the digital user interface that allows you to set the temperature 

accurately, to the nearest degree. 

The integral LCD display indicates precisely how much hot water is 

available. And more: The LCD display shows you all of the information 

you need – from energy use, to the temperature currently programmed, 

up to diverse data concerning the current operating status. 

The SHZ series of wall mounted water heaters can be installed in open 

systems for single draw-off points, or in sealed systems with multiple 

draw-off points. The SHZ series allows you to use cost-effective offpeak 

rates in combination with daytime tariffs. 

SHZ 30–150 LCD electronic comfort 

Wall mounted water heater with 30, 50, 80, 100, 120 

and 150 l (subject to model) 

1.0 – 6.0 kW (subject to device and connection type) 

Two heating circuits for heating up during the day and night 

Rapid heat-up pushbutton 

Stand-by consumption loss 0.45 – 1.05 kWh per day (subject to model) 

Precise temperature control to the nearest degree 

Heat content display, in litres of mixed water 

For open and sealed systems 

Automatic scaling indicator 

Impressed current anode 

28 | 29

IDEAS ON THE WALL 

Combining convenience with effi ciency | The HFA-Z is a wall mounted 

water heater with a world of possibilities. A very special option is also 

available if it is connected as an open, non-pressurised cylinder. Not 

only can the HFA-Z be used as a regular wall mounted water heater, 

it can also be operated with a single heat-up option. In the latter 

operating mode, the cylinder content is heated once to a programmed 

temperature of your choice, i.e. up to a maximum of + 82 °C. In this 

mode, the heat-up is activated manually via a pushbutton. 

The fine adjustment selector allows you to infinitely vary the 

temperature at the unit itself. The special enamel coating and highly 

effective protective magnesium anode guarantee a long service life. 

This wall mounted water heater can be operated both in open and 

closed systems, and is available with a capacity of 30, 80, 100 or 

150 litres. 

HFA-Z 30–150 universal 

Wall mounted water heaters with 30, 80, 100, 150 l 

(subject to model) 


Two heating circuits for heating up during the day and night 

Optional use of off-peak tariffs 

Pushbutton for rapid heating 

Stand-by consumption loss 0.5 –1.2 kWh per day (subject to model) 

Variable temperature selection 

For open and sealed system 

Single heat-up option

Open to both | The SH 30–150 S electronic series can deliver high 

levels of domestic hot water convenience to your home. They can be 

installed either as open systems for a single draw-off point or in sealed 

systems for multiple draw-off points. The units feature a continuously 

variable temperature setting. The rotary selector can also be used to 

set a temperature limit at + 45/+ 55 and + 65 °C. 

SH 30 – 150 S electronic 

Wall mounted water heaters with 30, 50, 80, 100, 120 

and 150 l (subject to model) 


One circuit for continuous or off-peak water heating 


LED user interface 

Electronic heat content display 


Signal anode 

30 | 31

MORE STORAGE 

Comfort on the wall | The SH A series of wall mounted SHW cylinders 

supplies suffi cient hot water to any desired place in your home. The 

detailed thermostat shows the exact hot water temperature at any 

time. The good qualities in terms of longevity are inherited from its 

big brother, the SH. 

SH A 

Wall mounted storage water heaters with 30, 50, 80, 100, 120 and 

150 l (subject to model) 


One circuit for continuous or off-peak water heating 

Heat content display 


Signal anode

A complete design | The PSH series of wall mounted storage water 

heaters, ranging in size from 30 to 200 litres, are designed to supply 

multiple draw-off points. The PSH TM is the hot water spring for 

your bathroom. It heats the cylinder content up to + 70 °C. For this, 

an infi nitely variable rotary selector enables the precise temperature 

adjustment at the device. Equipped with a protection anode and 

timeless design the stage is set for a long life time. 

PSH TM 

2 kW (subject to model and connection type) 

Temperature settings + 35 °C to + 70 °C 

Operation signal lamp 

Protection anode 

32 | 33

FREESTANDING DHW CYLINDERS 

A WEALTH OF WARMTH 

The large DHW cylinders from STIEBEL ELTRON can satisfy the water needs of the entire 

household with ease. The highly effective insulation enables an efficient operation, 

especially when using cheaper off-peak tariffs. Innovative corrosion protection combined 

with minimum maintenance ensure this cylinder can be in continuous and trouble-free 

use for many years. The wide range of advanced freestanding DHW cylinders even offers 

a multitude of possible combinations with central heating systems, solar heating 

systems and heat pumps.

ENOUGH FOR EVERYONE 

Wow – that was good! I think it's great when we all do something together. Even if, later 

on, it's a bit topsy-turvy at home. Though everything's just fine in the bathroom. No more 

queuing in our house. We can have a bath or a shower at the same time; there's plenty 

of hot water to go round. It's a real competition: Whoever finishes last, cleans the bath!

Impressive when it comes to quality, too | The SHW series of 

freestanding DHW cylinders with 200, 300 and 400 litres capacity 

offer enough backup to heat a whole house. 

The sealed DHW heater is made of steel with a special enamel coating 

on the inside. Additional corrosion protection is provided by an anticorrosion 

rod with signal indicator element. 

This makes the SHW ideal for multiple draw-off points. The cylinder is 

supplied as standard with a thermometer, signal anode and variable 

cold water inlet. Its temperature is infi nitely variable. 

Its highly effective insulation keeps heat dissipation to a minimum. 

With the option of operating the cylinder with the less expensive 

off-peak current, the SHW series of freestanding DHW cylinders are 

also ideal as central and economic domestic hot water solutions for 

domestic households and commercial use alike. All freestanding DHW 

cylinders are easy to retrofi t during renovation work. 

SHW 200 – 400 S 

Cylinder with 200, 300, 400 l (subject to model) 

2.0 – 6.0 kW universal immersion heater 

(subject to device and connection type) 

Rapid heat-up button 


Optional cost-effective off-peak operation 

Infi nitely variable temperature control, approx. + 35 °C to + 82 °C 

Copper immersion heater elements can be replaced individually 

Signal anode 

36 | 37

WELL SUPPLIED 

FROM A STANDING START 

Two in one | More and more households are putting their faith in 

renewables to cover their heating demand. Freestanding cylinders 

SBS 800 to 1500 from STIEBEL ELTRON can act as an important link. 

They enable operation with several energy sources. They are buffer 

and instantaneous water cylinder (in conjunction with a source for 

DHW heating) in one. The highly effective internal indirect coil improves 

hygiene, since only a small amount of DHW needs to be kept 

hot to supply the entire house with hot water. Supported by environmentally 

friendly solar energy: The additional internal indirect solar 

coil inside the cylinder (SBS W SOL) allows an additional renewable 

source of energy to be integrated into the system. Consequently, this 

comb cylinder turns into a genuine power pack in your utility room. 

The cylinder is made from steel with an internal corrugated stainless 

steel heat exchanger, and can be fi tted as option with highly-effective 

insulation for optimum energy effi ciency. 

SBS 800 – 1500 

Cylinder with 600 to 1,500 l (subject to device) 

DHW heating and buffer cylinder in one 

Hygienic DHW heating in the corrugated stainless steel heat 

exchanger (instantaneous water heater mode) 

Heat pump operation, may be combined with solar (SBS W SOL), 

additional heat sources and threaded immersion heaters (BGC) 

Highly effective insulation

Generously supplied | The sealed freestanding SHW ACE DHW 

cylinder can hold 200, 300 or 400 litres of domestic hot water. 

The cylinder is sized for any number of draw-off points. An anticorrosion 

rod protects the inside against corrosion. The cylinder is 

made of steel with a special enamel coating on the inside and is fi tted 

with highly effective insulation for optimum energy effi ciency. 

SHW 200 – 400 ACE 

Cylinder with 200, 300, 400 l (subject to model) 

2 – 4 kW/230 V 

2 – 6 kW/400 V 

Infi nitely variable temperature control, approx. + 35 °C to + 82 °C 

38 | 39

COMMERCIAL USE 

IDEAL FOR ANY BUSINESS 

Equipment needs to perform quite differently when catering for many people. This is 

due to higher volume demands, time constraints and sometimes also a lack of available 

space. Our products for commercial use are perfectly matched to such conditions. 

Reliable technology and robust construction, that can even withstand the most arduous 

continuous use, are further proof of the special quality of all products made by 

STIEBEL ELTRON.

HAND DRYERS 

HYGIENE IN THE AIR 

How work evaporates into thin air | The hand dryer remains the 

most hygienic and most economical solution for drying your hands 

in a washroom. You neither need to supply and wash towels nor 

constantly refi ll and dispose of paper towels. If required, additional 

fragrance sticks can even provide a fresh ambience in bathrooms and 

toilets. When you chose this dryer you will not only have decided 

upon a very hygienic alternative, but you will also save a great deal 

of time and money for your business. One hand is always washing 

and drying the other, so to speak. The HTE electronic is a real hit, not 

least because of its extraordinarily quiet operation. An intelligent IR 

proximity sensor switches the unit ON, when you hold your hands 

6 to 12 cm under the air outlet. It also provides the OFF control, 

when you remove your hands again. The robust casing protects the 

delicate technical interior against damage. As does the design, as 

this prevents objects, such as cigarette butts, from being deposited 

on the casing. 

HTE 4, HTE 5 electronic 

1800 W connected load 

HTE 4 with casing made from shock-resistant plastic 

HTE 5 with a diecast aluminium casing 

Air fl ow rate 146 m³/h 

220 – 240 V 

Operating noise 54 dB(A) 

HTE 4 in alpine white 

HTE 5 in signal white

Dry in a jiffy | The HTT series of hand dryers have the strongest breath. 

Their enormous air fl ow rate enables them to deliver especially quick 

drying times. Their powerful output means that they are also one of 

the fastest, most economical and most hygienic of all hand dryers. 

Such features make HTT dryers particularly suitable for public toilets 

and swimming baths with high usage rates. For example, in railway 

stations, airports or bars/restaurants. All HTT models operate with 

an electronic IR proximity sensor. This switches the hand dryer ON 

when your hands are placed between 6 and 12 cm from the air outlet, 

and OFF again when you remove your hands. The robust casing is 

made of diecast aluminium with a tough paint fi nish that ensures it 

retains its hygienic look over its long service life. 

HTT 4, HTT 5 turbotronic 

2500 W output 

HTT 4 with casing made from shock-resistant plastic 

HTT 5 with a diecast aluminium casing 

Air fl ow rate 250 m³/h 

220 – 240 V 

Operating noise 68 dB(A) 

HTT 4 in alpine white 

HTT 5 in signal white, anthracite-metallic or silver-metallic 

42 | 43

HOT WATER IN S, M, L AND XXL 

For commercial applications | Commercial 

applications aren't easy on any electric 

appliance. However, these models are 

used to hard work. The KA eltroboil series 

of water boilers with capacities of 5 or 10 

litres stand out because of their robustness. 

They will do their job reliably, particularly in 

continuous operation. The container is refi lled 

automatically each time water is drawn. The 

KA 5 eltroboil 

5 l cylinder 

Top quality stainless steel fi nish 

Plastic hot water cylinder 

Button valve in matt chrome fi nish 

Up to 30 cups of boiling water available 

system automatically lowers the temperature, 

if water is not drawn for some time. These 

heaters are equipped with a condensation 

chamber which prevents steam release. They 

are also fi tted with indicators to show when 

the unit is "ON" or the water is "boiling". 

KA 10 eltroboil 

10 l cylinder 

High-grade stainless steel fi nish 

Tin-plated copper hot water cylinder 

Chrome tap valve 

May be extended up to 3 tap valves 

Up to 60 cups of boiling water available 

A rounded performance | The SHD also 

offers commercial organisations a powerful 

alternative. It offers variable temperature 

selection up to + 85 °C, and can supply domestic 

hot water to multiple draw-off points. 

The SHD can be operated in three modes: As 

an instantaneous, as a dual-circuit or as a 

single circuit domestic hot water cylinder, 

which also allows the use of pre-heated water 

(up to + 75 °C). 

SHD 

Cylinder with 30, 100 l (subject to model) 

Stand-by consumption loss 0.45/ 0.77 kW 

Infi nitely variable temperature selection, 

approx. + 35 °C to + 85 °C 

21 kW in instantaneous water heater mode 

Signal anode

Water supplied in a grand style | The SHO freestanding DHW cylinder 

is your company's very own hot spring. Thanks to its capacity of up 

to 1000 litres and a temperature which is infi nitely variable up to 

+ 85 °C, it holds a large volume of hot water at the ready, at all times. 

The cylinder is equipped with a signal anode and thermometer as 

standard. Its automatic control unit maintains the water at the desired 

temperature. The sealed water heaters, the copper immersion heater 

elements of which are easy to replace, is ideal for any number of 

draw-off points. A domestic hot water circulation connection is fi tted. 

SHO AC 600, 1000 

Cylinder with 600, 1000 l (subject to model) 

Single circuit operation 7.5 kW and 12 kW 

Universal dual-circuit operation 6 / 12 – 18 / 18 kW 

Optional cost-effective off-peak operation 

Replaceable copper immersion heater elements 

Infi nitely variable temperature selection from + 35 °C to + 85 °C 

Thermal insulation with plastic jacket available as accessory 

44 | 45

DATA, FACTS AND ACCESSORIES 

WELL SORTED


FULL ELECTRONIC CONTROL | ELECTRONIC CONTROL 

Model DHE SLi electronic comfort DEL SLi electronic LCD 

– Type DHE 18 SLi 25 A DHE 18/21/24 SLi DHE 27 SLi DEL 18 SLi25 A DEL 18/21/24 SLi DEL 27 SLi 

– Part no. 189780 227490 189783 189788 227496 189791 

Application 

– Nominal capacity 

– For one or more 

l 0.4 0.4 

draw-off points • • • • • • 

– Mounting form Optional installation over & undersink Optional installation over & undersink 

Connection details 

– Type Pressure tested (sealed) Pressure tested (sealed) 

– Permiss. op. pressure MPa/bar 1 / 10 1 / 10 

– For water types Suitable for water with low limescale or with limescale content Suitable for water with low limescale or with limescale content 

– Water connections Threaded connections G ½" (finished/unfinished walls) Threaded connections G ½" (finished/unfinished walls) 

– Connected load kW 18 18/21/24 27 18 18/21/24 27 

– Voltage 3/PE ~ 400 V 3/PE ~ 400 V 

– Rated current A 26 29/31/35 39 26 29/31/35 39 

– Fuse protection A 25 32/32/35 40 25 32/32/35 40 

– Protection level IP 25 (hoseproof) IP 25 (hoseproof) 

– Test symbols 

– DHW output 

VDE / GS VDE / GS 

(mixed water Δ ϕ 28 K) l/min 9.2 9.2/10.7/12.3 13.8 9.2 9.2/10.7/12.3 13.8 

Equipment level 

– Electrical flow control • • • – – – 

– Electrical air detection system • • • • • • 

– Solar power (pre-heated water) • • • • • • 

– Programmable set temperature 2 2 2 – – – 

– Fitness shower program 

– ECO energy and 

4 4 4 – – – 

water-saving feature l/min Adjustable from 4 to 15 – – – 

– Automatic water volume control l Adjustable from 5 to 200 – – – 

– Child-proof system °C Adjustable from 20 to 60 – – – 

– Suitable for plastic pipework • • • • • • 

– Temperature display Backlit multifunction LCD LCD 

– Temperature range °C Variable adjustment between 20 – 60 Variable adjustment between 30 – 60 

– Temperature limit °C Electronic adjustment between 21 – 60 Mechanical adjustment to 43 

– Control unit Fully electronic control Electronically controlled 

– Heating system Bare-wire heating system Bare-wire heating system 

– Colour White White 

Weight and dimensions 

– Dimensions (H x W x D) mm 478 x 225 x 105 478 x 225 x 105 

– Wet weight kg 4.5 4.5 

Accessories (optional) 

– Valves for finished walls WKMD, WBMD (pressure fittings) WKMD, WBMD (pressure fittings) 

– Wireless comfort remote control • • • – – – 

– Hard wired comfort remote control • • • – – – 

– Wireless remote control – – – • • •


FULL ELECTRONIC CONTROL | ELECTRONIC CONTROL 

Model DHB-E Si electronic DHB STi thermotronic 

– Type DHB-E 11 SL DHB-E 13 SL DHB-E 18 SL 25A DHB-E 18/21/24 SL DHB-E 27 SL DHB 18 ST DHB 21 ST DHB 24 ST DHB 27 ST 

– Part no. 223210 222429 270724 227483 270727 227608 227609 227610 227611 

Application 



l 0.4 0.4 

draw-off points • • • • • • • • • 

– Mounting form¹ ) Optional installation over & undersink Optional installation over & undersink worktop 




– For water types2) Suitable for water with low limescale or with limescale content Suitable for water with low limescale or with 

limescale content 

– Water connections Threaded connections G ½" (finished/unfinished walls) Threaded connections G ½" 

(finished/unfinished walls) 

– Electrical connection On top/underneath On top/underneath 

– Connected load3) kW 11.1 13.5 18 18/21/24 27 18 21 24 27 


– Rated current A 16 19 26 29/31/35 39 26 31 35 39 

– Fuse protection A 16 20 25 32/32/35 40 32 32 35 40 





(mixed water Δ ϕ 28 K) l/min 5.6 6.9 9.2 9.2/10.7/12.3 13.8 9.2 10.7 12.3 13.8 


– Electronic air detection system • • • • • • • • • 

– Suitable for plastic pipework 4) • • • • • • • • • 

– Temperature display Rotary selector with temperature drag Symbols 

– Temperature range °C Variable adjustment between 30 – 60 (approx.) Three-stage, approx. 

– Control unit Electronically controlled Electronically controlled 






Accessories 

– Valves for finished walls 

(option) WKMD, WBMD (pressure fittings) WKMD, WBMD (pressure fittings) 

– Stove conn. set (option) • • – – – • • – – 

Key 

• Available, or yes. 

1) On the standard equipment, the water connections are located underneath. 

Alternative design available with water connections above (mounting on 

finished walls). 

2) For applications see equipment documentation. 

3) Regulations vary according to the local power supply; to be connected only 

by a qualified electrician. 

4) For systems with plastic pipework, please observe the manufacturer's 

instructions and limitations. 

48 | 49


HYDRAULIC CONTROL 

Model DHH Si control HDB Si control 

– Type DHH 12 S DHH 18 S DHH 21 S DHH 24 S DHH 27 S HDB 18 HDB 21 HDB 24 HDB 27 

– Part no. 227643 227574 227575 227576 227577 074192 074193 074194 074195 

Application 



l 0.4 0.4 

draw-off points • • • • • • • • • 

– Mounting form1) Optional installation over & undersink Optional installation over & undersink2) Connection details 



– For water types2) Suitable for water with low limescale or with limescale content Suitable for water with low limescale or with limescale content 

– Water connections Threaded connections G ½" (finished/unfinished walls) Threaded connections G ½" (finished/unfinished walls) 

– Connected load3) kW 11.1 18 21 24 27 18 21 24 27 






(mixed water Δ ϕ 28 K) l/min 5.6 9.2 10.7 12.3 13.8 9.2 10.7 12.3 13.8 


– Circuit breaker 2 switch positions 2 switch positions 

– Shower comfort switch • • • • • – – – – 

– Suitable for plastic pipework4) • • • • • • • • • 

– Control unit Hydraulically controlled Hydraulically controlled 






Accessories 

– Fittings for finished walls 

(option) WKMD, WBMD (pressure valves) WKMD, WBMD (pressure valves) 

Key 


1) On the standard equipment, the water connections are located underneath. 

Alternative design available with water connections above (mounting on 

finished walls). 


3) Regulations vary according to the local power supply; to be connected only 


4) For systems with plastic pipework, please observe the manufacturer's 

instructions and limitations.

INSTANTANEOUS WATER HEATER | MINI WATER HEATERS 

HYDRAULIC CONTROL 

Model DHF C compact control DNM DHM 

– Type DHF 13 C DHF 15 C DHF 18 C DHF 21 C DHF 24 C DNM 3 DNM 4 DNM 6 DHM 3 DHM 4 DHM 6 

– Part no. 074301 074302 074303 074304 074305 185411 185415 185418 220813 220814 185473 

Application 

– Nominal capacity l 0.6 0.1 0.1 

– For one draw-off point •/• •/• •/• •/• •/• •/– •/– •/– •/– •/– •/– 

– Mounting form Optional installation 

Optional installation 

Installation undersink 

over & undersink 

over & undersink 


– Type Pressure tested (sealed) Non-pressurised Pressure tested 

– Permiss. op. pressure MPa/bar 1 / 10 0 1 / 10 

– For water types1) (soft / hard) Only suitable for water with low limescale •/• •/• •/• •/• •/• •/• 

– Water connections Threaded connections G ½" (finished/unfinished walls) Threaded connections G ⅜" Threaded connections G ⅜" 

– Connected load2) kW 13.2 15 18 21 24 3.5 4.4 5.7 3.5 4.4 5.7 

– Voltage2) 3/PE ~ 400 V 1/N/PE ~ 230 V 1/N/PE ~ 230 V 

– Protection level IP 24 (splash-proof) IP 25 (hoseproof) IP 25 (hoseproof) 



VDE / GS VDE / GS VDE / GS 

(mixed water Δ ϕ 25 K) 


l/min – – – – – 2.0 2.5 3.3 2.0 2.5 

(mixed water Δ ϕ 28 K) l/min 6.7 7.7 9.2 10.7 12.3 – – – – – – 


– Control unit Hydraulically controlled Hydraulically controlled Hydraulically controlled 

– Heating system Tubular heating element Bare-wire heating system Bare-wire heating system 

– Colour White White White 


– Dimensions (H x W x D) mm 370 x 220 x 130 142 x 191 x 82 142 x 191 x 82 

– Wet weight kg 4.0 1.4 1.4 

Accessories for DNM 

– Non-pressurised valves 

(optional) 

WKMD, WBMD (pressure valves) MAW twin-lever wall mounted tap 

MAZ twin-lever basin tap 

MAE mono-lever basin tap 

Key 



2) Regulations vary according to local power supply company; to be connected only 

by a qualified electrician – except for units which are delivered ready to plug in. 

– 

50 | 51

WATER BOILERS 

Model EBK 5 automatic 

– Type EBK 5 G EBK 5 GA EBK 5 K KBA 5 automatic 

– Part no. 074286 074287 074288 074289 

Application 

– Nominal capacity l Max. 5 Max. 5 Max. 5 Max. 5 

– For one draw-off point • • • • 

– Mounting form Oversink unit 


– Connected load kW 2 2 2 2 

– Voltage1) 1/N/PE ~ 230 V 

– Protection level IP 24 (splash-proof) 

– Test symbols VDE / CE 


– Cylinder material Glass Glass Plastic Plastic 

– Temperature range, max. °C 100 100 100 100 

– Colour White White White White 

– Type of valve 2-handle lever 3-handle 2-handle lever 3-handle 

– Valve casing colour White Chrome finish White Chrome finish 


– Dimensions (H2) x W x D) mm 325 x 245 x 242 295 x 325 x 197 

– Wet weight3) kg 8.5 8.5 7.7 7.7 

Accessories 

– Draw-off tap (option) • • • • 

Key 



by a qualified electrician – except for units which are delivered ready to plug in. 

2) Up to tap centre in fitted kitchens. 

3) Before installing ensure wall has sufficient load-bearing capacity.


FOR ONE DRAW-OFF POINT 

Model SNU 5 SLi dripstop 

comfort 

SNU 10 SLi 

comfort 

Key 


1) The mixed water volume has a service temperature of 40 °C which is 

based on a cold water temperature of 15 °C and a cylinder water 

temperature of 65 °C (with respect to the operational state). 

SN 5 – 15 SLi comfort UFP 5 

– Type SNU 5 SLi SNU 10 SLi SN 5 SLi SN 10 SLi SN 15 SLi UFP 5 t UFP 5 h 

– Part no. 221121 221122 222199 221127 222193 222204 222203 222175 222158 

Application 

– Nominal capacity l 5 5 10 5 10 15 15 5 5 

– For one draw-off point 

– Mounting form 

• • • • • • • • • 

– Oversink unit – – – • • • • – • 

– Undersink unit • • • – – – – • – 


– Type Non-pressurised (open) Non-pressurised (open) Non-pressurised (open) 

– Mixed water vol. from 40 °C1) – Stand-by power consumption 

l 10 10 19 10 19 28 28 10 10 

at 65 °C / 24 h kWh 0.20 0.20 0.32 0.21 0.31 0.37 0.37 0.23 0.23 

– Connected load2) kW 2 1 2 2 2 2 3.3 2 2 

– Voltage 1/N/PE ~ 230 V 1/N/PE ~ 230 V 1/N/PE ~ 230 V 

– Protection level IP 24 (splash-proof) IP 24 (splash-proof) IP 24 (splash-proof) 

– Test symbols VDE / CE VDE / CE VDE / CE 


– Plastic inner cylinder • • • • • • • • • 

– Temperature range 

– Temperature limit 

°C 35 to 85 35 to 85 35 to 85 

adjustable to °C 38, 45, 55, 65 38, 45, 55, 65 45, 55, 65 

– Economy option Eco °C 60 60 60 

– Colour White White White 


– Dimensions (H3) x W x D) mm 421 x 263 x 230 503 x 295 x 275 421 x 263 x 230 503 x 295 x 275 601 x 316 x 295 415 x 252 x 215 415 x 252 x 215 

– Wet weight kg 8.1 8.1 15.0 8.1 15.1 21.7 21.7 8.1 8.1 

Accessories 

– Taps Valves for non-pressurised water heaters 

2) Regulations vary according to local power supply company; to be connected 

only by a qualified electrician – except for units which are delivered ready to 

plug in. 

3) Including water connector (excl. taps). 

52 | 53

SHOWER WATER HEATERS 

FOR ONE DRAW-OFF POINT 

Model EB 15 SL comfort 

– Type EB 15 SL 

– Part no. 222205 222206 

Application 

– Nominal capacity l 15 15 



• • 

draw-off points 

– Mounting form 

– – 

– Oversink unit • • 

– Undersink unit – – 


– Type Non-pressurised (open) 

– Permiss. op. pressure MPa/bar – 

– Mixed water volume of 40 °C1) – Stand-by power consumption 

l 28 28 

at 65 °C / 24 h kWh – – 

– Connected load2) kW 2 3.3 

– Voltage 1/N/PE ~ 230 V 

– Protection level IP 24 (splash-proof) 



– Copper inner cylinder – – 

– Plastic inner cylinder • • 



°C 35 to 85 

adjustable to °C – – 

– Economy option Eco °C – – 

– Colour White 


– Dimensions (H x W x D3) ) mm 601 x 316 x 295 

– Wet weight kg 21.7 

Accessories 

– Taps Non-pressurised taps 

– Safety valves – – 

Key 






FOR SEVERAL DRAW-OFF POINTS 

SHU 5 – 10 SLi comfort SH 10 – 15 SLi comfort 

SHU 5 SLi SHU 10 SLi SH 10 SLi SH 15 SLi 

222151 222199 222181 222211 222209 

5 10 10 15 15 

– – – – – 

• • • • • 

– – • • • 

• • – – – 

Pressure tested (sealed) Pressure tested (sealed) 

0.7 / 7 0.7 / 7 

10 19 19 28 28 

0.31 0.36 0.35 0.41 0.41 

2 2 2 2 3.3 

1/N/PE ~ 230 V 1/N/PE ~ 230 V 

IP 24 (splash-proof) IP 24 (splash-proof) 

VDE / CE VDE / CE 

• • • • • 

– – – – – 

35 to 82 35 to 82 

38, 45, 55, 65 38, 45, 55, 65 

60 60 

White White 

421 x 263 x 230 503 x 295 x 275 503 x 295 x 275 601 x 316 x 295 

10.2 18.0 18.1 25.9 

– – – – 

SVMT SVMT KV 307, KV 40 KV 307, KV 40 

2) Regulations vary according to local power supply company; to be 

connected only by a qualified electrician – except for units which are 

delivered ready to plug in. 

3) Including water supply connector (excl. taps/valves).


DUAL/SINGLE CIRCUIT WATER HEATERS 

Model SHZ 30 – 150 LCD electronic comfort 

– Type SHZ 30 LCD SHZ 50 LCD SHZ 80 LCD SHZ 100 LCD SHZ 120 LCD SHZ 150 LCD 

– Part no. 185452 185453 185454 185455 185456 185457 

Application 


– For one or more draw-off 

l 30 50 80 100 120 150 

points (pressure tested) 


• • • • • • 

(non-pressurised) • • • • • • 


– Type 

– Operating mode 

Pressure tested (sealed) 

– Dual/single circuit cylinder1) • • • • • • 

– Permiss. op. pressure MPa/bar 0.6 / 6 

– Mixed water volume of 40 °C2) l 

– Stand-by power consumption 

59 97 159 198 235 292 

at 65 °C /24 h kWh 0.45 0.52 0.66 0.77 0.92 1.05 

– Connected load and voltage3) Dual-circuit operation: Single circuit operation: Single heat-up operation: 

1/2 kW, 2/2 kW, 1/4 kW, 2/4 kW, 3/4 kW | 1/N/PE ~ 230 V 1 kW, 2 kW, 3 kW, 4 kW | 1/N/PE ~ 230 V 1 kW, 2 kW, 3 kW, 4 kW | 1/N/PE ~ 230 V 

1/4 kW, 2/4 kW, 3/4 kW | 2/N/PE ~ 400 V 3 kW, 4 kW | 2/N/PE ~ 400 V 3 kW, 4 kW | 2/N/PE ~ 400 V 

1/6 kW, 2/6 kW, 3/6 kW | 3/N/PE ~ 400 V 6 kW | 3/N/PE ~ 400 V 6 kW | 3/N/PE ~ 400 V 

– Protection level IP 25 (hoseproof) 



– Steel inner cylinder, 

enamel-coated, with prot. anode • • • • • • 

– Electronic control unit • • • • • • 

– Temperature range °C 20 to 85 

– Economy setting °C 40 to 65 

– Liquid crystal display • • • • • • 

– Impressed current anode • • • • • • 



– Dimensions (H x W x D4) ) mm 770 x 410 x 420 740 x 510 x 510 1,050 x 510 x 510 1,050 x 510 x 510 1,210 x 510 x 510 1,445 x 510 x 510 

– Wet weight5) kg 53.0 78.0 118.0 140.0 165.0 203.0 

Accessories 

– Safety valves KV 30, KV 40 for pressure tested, fixtures for non-pressure tested usage (see page 66) 

Key 


1) Dual-circuit system for reheating during the day, subject to demand. 







4) Including water inlet nozzles (excl. valves). 

5) Before installing ensure wall has sufficient load-bearing capacity. 

54 | 55


DUAL / SINGLE CIRCUIT WATER HEATERS 

Model SH 30 – 150 S electronic HFA-Z 30 – 150 universal 

– Type SH 30 S SH 50 S SH 80 S SH 100 S SH 120 S SH 150 S HFA-Z 30 HFA-Z 80 HFA-Z 100 HFA-Z 150 

– Part no. 073047 073048 073049 073050 073051 073052 073111 074467 074469 073114 

Application 

– Nominal capacity l 30 50 80 100 120 150 30 80 100 150 

– For one or more draw-off points 

(pressure tested) 


• • • • • • • • • • 

(non-pressurised) • • • • • • • • • • 


– Type 

– Mode of operation 

Pressure tested (sealed) Pressure tested (sealed) 

– Single circuit cylinder • • • • • • – – – – 

– Dual/single circuit cylinder1) – – – – – – • • • • 

– Permiss. op. pressure MPa/bar 0.6 / 6 0.6 / 6 


l 59 97 159 198 235 292 58 155 195 290 

at 65 °C / 24 h kWh 0.45 0.52 0.66 0.77 0.92 1.05 0.5 0.72 0.86 1.2 

– Connected load and voltage3) Single circuit operation: 

1 kW, 2 kW, 3 kW, 4 kW | 1/N/PE ~ 230 V 

3 kW, 4 kW | 2/N/PE ~ 400 V 

6 kW | 3/N/PE ~ 400 V 

Single heat-up operation: 

2 kW, 4 kW | 1/N/PE ~ 230 V 

4 kW | 2/N/PE ~ 400 V 

6 kW | 3/N/PE ~ 400 V 

6 kW | 3/PE ~ 400 V 

– Protection level IP 25 (hoseproof) IP 24 (splash-proof) 

– Test symbols VDE / CE VDE / CE 

Key 









4) Including water supply connector (excl. valves). 


Dual-circuit operation: Single circuit operation: 

2/4 kW | 1/N/PE ~ 230 V 2 kW, 4 kW | 1/N/PE ~ 230 V 

2/4 kW | 2/N/PE ~ 400 V 4 kW | 2/N/PE ~ 400 V 

2/6 kW | 3/N/PE ~ 400 V 6 kW | 3/N/PE ~ 400 V 


– Steel inner cylinder, enamelcoated, 

with prot. anode • • • • • • • • • • 

– Temperature range °C 35 to 82 35 to 82 

– Economy option Eco °C 60 60 

– Signal anode • • • • • • – – – – 

– Hot water volume display • • • • • • – – – – 



– Height4) mm 770 740 1,050 1,050 1,210 1,445 770 975 975 1,280 

– Width mm 410 510 510 510 510 510 410 510 510 510 

– Depth mm 420 510 510 510 510 510 420 510 510 510 

– Wet weight5) kg 53.0 78.0 118.0 140.0 165.0 203.0 52.6 113.0 137.5 199.0 

Accessories 

– Safety valves KV 30, KV 40 for pressure tested, valves for non-pressurised use (see page 66)

WALL MOUNTED STORAGE HEATERS 

Model SH 50 – 150 A 

– Type SH 50 A SH 80 A SH 100 A SH 120 A SH 150 A SH 100 A UNI SH 120 A UNI SH 150 A UNI 

– Part no. 073120 073121 073122 073123 073124 073277 073194 073195 

Application 



l 50 80 100 120 150 100 120 150 



• • • • • • • • 

(non-pressurised) • • • • • • • • 


– Type 



– Single circuit cylinder • • • • • • • • 

– Dual/single circuit cylinder1) – – – – – – – – 

– Permiss. op. pressure MPa/bar 0.6 / 6 


l 97 159 148 235 292 198 235 292 

at 65 °C /24 h kWh 0.53 0.75 0.89 0.93 1.25 0.89 0.93 1.25 

– Connected load and voltage3) Single circuit operation: Single circuit operation: Dual-circuit operation: 

2 kW | 1/N/PE ~ 230 V 3 kW | 1/N/PE ~ 230 V 1.3 kW, 2.6 kW | 1/N/PE ~ 230 V 

3.9 kW | 3/N/PE ~ 400 V 


– Test symbols CE 



enamel-coated, with prot. anode • • • • • • • • 


– Economy option Eco °C 60 

– Signal anode – – – – – – – – 

– Hot water volume display – – – – – – – – 



– Height4) mm 740 

– Width mm 510 

– Depth mm 510 

– Wet weight5) kg 57.0 116.0 137.0 161.0 197.0 138.0 162.6 198.0 

Accessories 

– Safety valves KV 30, KV 40 for pressure tested 

Key 









4) Including water inlet nozzles (excl. valves). 


56 | 57


Model PSH 30 – 200 TM 

– Type PSH 30 TM PSH 50 TM PSH 80 TM PSH 100 TM PSH 120 TM PSH 150 TM PSH 200 TM 

– Part no. 222215 222216 222217 222218 222231 222232 222233 

Application 



l 30 50 80 100 120 150 200 



• • • • • • • 

(non-pressurised) – – – – – – – 


– Type 



– Single circuit cylinder • • • • • • • 

– Dual/single circuit cylinder1) – – – – – – – 

– Permiss. op. pressure MPa/bar 0.6 

– Mixed water volume of 40 °C2) l 


56 97 143 186 228 291 389 

at 65 °C /24 h kWh 0.73 0.99 1.15 1.48 1.73 2.18 2.94 

– Connected load and voltage3) Single circuit operation: 

2 kW | 1/N/PE ~ 230 V 


– Test symbols CE, VDE, EMV 



enamel-coated, with prot. anode • • • • • • • 


– Economy option Eco °C 60 

– Signal anode • • • • • • • 

– Hot water volume display • • • • • • • 

– Colour White/grey 


– Height4) mm 585 840 810 960 1,115 1,350 1,650 

– Width mm 390 390 470 470 470 470 470 

– Depth mm 390 390 470 470 470 470 470 

– Wet weight5) kg 49 75 110 136 159 197 258 

Accessories 

– Safety valves SV Ex ½ SV Ex ¾ 

Key 









4) Including water supply connector (excl. valves). 

5) Before installing ensure wall has sufficient load-bearing capacity.


Model Freestanding DHW cylinder Inst. water heating cylinder Inst. water heating cylinder 

– Type HSTP 200 HSTP 300 HSTP 400 SBS 800 W SBS 1000 W SBS 1500 W SBS 800 W SOL SBS 1000 W SOL SBS 1500 W SOL 

– Part no. 071264 071267 071270 227568 227569 227570 227571 227572 227573 

Application 

– Nominal capacity l 200 300 400 800 1,000 1,500 800 1,000 1,500 



– Dual/single circuit cylinder 1) • • • 

Key 



2) Permissible heating side 0.3/3 MPa/bar. 




Combined DHW and 

heating water buffer cylinder 

Combined DHW and 

heating water buffer cylinder 

– Water connection 

(external thread) below/above G1" / G1" G1 ¼" G1 ¼" 

– DHW circulation connection G ½" – – – – – – 

– Heat pump connection – G1 ½" G1 ½" G2" G1 ½" G1 ½" G2" 

– Heating circuit connection – G1 ½" G1 ½" 

– Connection for opt. heat source – G1 ½" G1 ½" 

– Permiss. op. pressure MPa/bar 0.6 / 6 0.6 / 6 2) 0.6 / 6 2) 

– Mixed water volume of 40 °C 3) l 397 590 792 – – – – – – 


at 65 °C / 24 h kWh 1.9 2.2 2.7 – – – – – – 

– Connected load and 

voltage 4) 

Dual-circuit operation: 2/4 kW, 4/4 kW 

1/N/PE ~ 230 V; 2/6 kW, 3/6 kW, 4/6 kW, 

6/6 kW | 3/N/PE ~ 400 V 

Single circuit operation: 2 kW, 4 kW 

1/N/PE ~ 230 V; 2 kW, 3 kW, 4 kW, 6 kW 

3/N/PE ~ 400 V 

– – 

– Protection level IP 24 (splash-proof) – – 

– Test symbols VDE / GS – – 


– Thermal insulation 

Permanently fixed/removable5) – Steel inner cylinder, enamel- 

•/– •/– •/– –/• –/• –/• –/• –/• –/• 

coated, with prot. anode • • • – – – – – – 



°C 35 to 82 – – – – – – 

can be adjusted to °C 45 to 60 – – – – – – 

– Contents HE DHW l – – – 41 53 65 41 53 65 

– Area Solar internal indirect coil m2 – – – – – – 2.4 3.0 3.6 

– Colour Pearl white Thermal insulation white Thermal insulation white 


– Height6) mm 1,570 1,585 1,755 1,840 2,250 2,190 1,840 2,250 2,190 

– Height when tilted mm – – – 1,880 2,285 2,225 1,880 2,285 2,225 

– Width mm ø 550 ø 650 ø 700 ø 790 ø 790 ø 1,000 ø 790 ø 790 ø 1,000 

– Depth mm 690 790 840 910 910 1120 910 910 1,120 

– Wet weight7) kg 255 368 485 950 1,175 1,736 995 1,220 1,791 



5) Thermal insulation WD SBS as accessory, thickness 110 mm. 

6) With water connector. 

7) Before installing ensure the floor has sufficient load-bearing capacity. 

58 | 59


Model Freestanding 

combi cylinder 

Freestanding DHW cyl. 

with int. heat exchanger 

Freestanding 

combi cylinder 

Kitchen DHW cylinder 

– Type SHW 200 S SHW 300 S SHW 400 S SHW 300 WS SHW 400 WS SB 302 S SB 402 S HT 80 S (undersink) 7) 

– Part no. 182120 182121 182122 185352 185353 185354 185355 074196 

Application 

– Nominal capacity l 200 300 400 300 400 300 400 80 



– Single circuit cylinder • • • • • Optional electric flange heater 9) – 

– Dual/single circuit cylinder 1) – – – – – Optional electric flange heater 9) • 

– Water connection 

(external thread) below/above G1" / G1" G1" / G1" G1" / G1" G ½" 

– DHW circulation connection G ½" – G ½" – 

– Permiss. op. pressure MPa/bar 0.6 / 6 1 / 10 1 / 10 1 / 10 

– Mixed water volume of 40 °C 2) l 397 590 792 590 792 – – 140 


at 65 °C / 24 h kWh 1.5 1.9 2.25 1.9 2.25 – – 1.1 

– Connected load and voltage3) Dual-circuit operation: 2/4 kW, 4/4 kW | 1/N/PE ~ 230 V; 

2/6 kW, 3/6 kW, 4/6 kW, 6/6 kW | 3/N/PE ~ 400 V 

Single circuit operation: 2 kW, 4 kW | 1/N/PE ~ 230 V; 

2 kW, 3 kW, 4 kW, 6 kW | 3/N/PE ~ 400 V 

Connection for electric heater rod: 

G1 ½" (in the upper third) 

No. of flange apertures: 

2 2 

External flange diameter (mm): 

ø 210 ø 210 

Dual-circuit operation: 

1/3 kW, 2/4 kW | 1/N/PE ~ 230 V 

2/6 kW | 3/N/PE ~ 400 V 

Single circuit operation: 

1, 2, 3, 4 kW | 1/N/PE ~ 400 V 

6 kW | 3/N/PE ~ 400 V 

– Protection level IP 24 (splash-proof) IP 24 (splash-proof) – – IP 24 (splash-proof) 

– Test symbols VDE / GS VDE / GS – – VDE / GS 


– Thermometer 

– Thermal insulation 

• • • • • • • – 

Permanently fixed/removable 

– Steel inner cylinder, enamel- 

•/– •/– •/– •/– •/– • /– • /– • /– 

coated, with prot. anode 

– Display element for 

• • • • • • • • 

protective anode • • • • • – – • 



°C 35 to 82 35 to 82 – – 35 to 82 

can be adjusted to °C 45 to 60 45 to 60 – – – 

– Integral heat exchanger4) m2 – – – 1.8 – – – 

– Colour Pure white / basalt grey Pure white / basalt grey Pure white / basalt grey White side panels 


– Height5) mm 1,570 1,585 1,755 1,585 1,755 1,585 1,755 810 – 870 | 850 – 910 8) 

– Width mm ø 630 ø 700 ø 750 ø 700 ø 750 ø 700 ø 750 445 | 450 8) 

– Depth mm 730 815 865 815 865 – – 550 | 600 8) 

– Weight, filled with water6) kg 265 377 490 437 550 401 519 125 | 133 8) 

Key 



2) The mixed water volume has a service temperature of 40 °C which is based on a cold 

water temperature of 15 °C and a cylinder water 


3) Regulations vary according to local power supply company; to be connected only by a 

qualified electrician – except for units which are delivered ready to plug in. 

4) Heat exchanger for the utilisation of additional energy sources, e.g. boiler operation. 


6) Before installing ensure the floor has sufficient load-bearing capacity. 

7) The HT 80 S cylinder for mounting below can be used as a backup unit with the full 

casing accessory, part no 074197. 

8) With full casing.

COMMERCIAL: HAND DRYERS 

Model HTE electronic HTT turbotronic 

– Type HTE 4 electronic HTE 5 electronic HTT 4 WS turbotronic 

– Part no. 073007 073008 074464 

– Colour Alpine white Off-white, RAL 9003 Alpine white 


– Connected load kW 1.8 1.8 2.6 

– Voltage V 220 – 240 220 – 240 220 – 240 

– Frequency Hz 50 50 50 / 60 

– Protection level/class IP 23 (splash-proof) / II (double-insulated) IP 23 (splash-proof) / II (double-insulated) 

– Air flow rate m3 /h 146 146 250 

– Operating noise dB(A) 54 54 68 



– Weight kg 2.5 4.0 2.7 

Model HTT turbotronic 

– Type HTT 5 WS turbotronic HTT 5 AM turbotronic HTT 5 SM turbotronic 

– Part no. 074465 182052 182053 

– Colour Off-white, RAL 9003 Anthracite metallic Silver metallic 


– Connected load kW 2.6 2.6 2.6 

– Voltage V 220 – 240 220 – 240 220 – 240 

– Frequency Hz 50 / 60 50 / 60 50 / 60 

– Protection level/class IP 23 (splash-proof) / II (double-insulated) 

– Air flow rate m3/h 250 250 250 

– Operating noise dB(A) 68 68 68 



– Weight kg 4.2 4.2 4.2 

60 | 61

COMMERCIAL: WATER BOILERS 

Model KA 5 – 10 eltroboil KA 15 – 50 eltromat® 

– Type KA 5 KA 10 KA 15 KA 50 

– Part no. 221377 221378 071030 071031 

Application 

– Nominal capacity l 5 10 15 50 

– For one draw-off point • • • • 

– Mounting form Oversink unit Oversink unit 


– Connected load kW 2.3 2.8 3.3 3.3 

– Voltage 1/N/PE ~ 230 V 1/N/PE ~ 230 V 

– Protection level IP 22 IP 24 D 

– Test symbols – VDE/CE 


– Cylinder material Plastic Copper, tin plated Copper 

– Temperature permanently set to Boiling point Boiling point 

– Colour Stainless steel White 


– Dimensions (H x W x D) mm 501 x 337 x 203 585 x 397 x 432 500 x 410 x 420 1,000 x 410 x 420 

– Wet weight kg 15.5 36 28.8 71.8 

Accessories 

– Collecting tray • • – – 

– Tap (optional extra)) – • – – 

– KNS tap – – • • 

– FV fill valve – – • • 

– Drain outlet • • • • 

Key 

• Available, or yes.

COMMERCIAL: INSTANTANEOUS WATER HEATERS 


Model Inst. water heating cyl. Freestanding combi cylinder Freestanding cylinder 

– Type SHD 30 S SHD 100 S SB 602 AC SB 1002 AC SB 650/3 AC SHO AC 600 SHO AC 1000 

– Part no. 073059 073060 071554 071282 003039 001414 003352 001415 003353 

Application 

– Nominal capacity l 30 100 600 1,000 650 600 1,000 

– For one or more draw-off points 

(pressure tested) • • • • • • • • • 


– Type 


Pressure tested (sealed) Pressure tested (sealed) Pressure tested (sealed) 

– Inst. water heating cylinder • • – – – – – – – 

– Single circuit operation – – Optional electric flange heater (special accessory) • – • – 

– Dual/single circuit cylinder1) – Water connection 

• • Optional electric flange heater (special accessory) – • – • 

(external thread) below/above G ½" G1 ½" / G2" G 1½ "/ G1½" G 1½" / G2" 

– DHW circulation connection – – G ½" G ½" 

– Permiss. op. pressure MPa/bar 0.6 / 6 1 / 10 0.6 / 6 


l 59 195 – – – 1,060 1,860 

at 65 °C / 24 h kWh 0.45 0.77 – – – 4.6 5.7 

– Connected load and 

voltage 3) 

Inst. water heating cyl. op.: 

3.5/21 kW | 3/PE ~ 400 V 

Dual-circuit operation: 

3.5/21 kW | 3/PE ~ 400 V 

Single circuit operation: 

21 kW | 3/PE ~ 400 V 

Key 



2) The mixed water volume has a service temperature of 40 °C which is based on a cold 

water temperature of 15 °C and a storage water temperature of 65 °C (with respect to 

the operational state). 

Connection for electric heater rod: 

G1 ½" (in the upper third) 

No. of flange apertures: 

2 2 3 

External flange diameter (mm): 

ø 280 ø 280 ø 280 

7.5 kW 

3/PE ~ 400 V 

– Protection level IP 25 (hoseproof) – – – IP 24 (splash-proof) 

– Test symbols VDE / CE – – – VDE / CE 

6/12 kW, 12/12 kW 

3/N/PE ~ 400 V 


– Thermometer – – • • – • • 

– Removable thermal insulation 

– Steel inner cylinder, enamel- 

– – • • • • • 

coated, with prot. anode • • • • • • • 

– Display element for prot. anode • • – – – • • 



°C 35 to 85 – – – 35 to 85 

adjustable to °C – – – – – 45 / 60 

– Economy option Eco °C 60 – – – – – 


12 kW 

3/PE ~ 400 V 


– Height4) x width mm 770 x 410 1,050 x 510 1,685 x ø 750 2,525 x ø 750 1,725 x ø 750 1,685 x ø 750 2,525 x ø 750 

– Depth mm 420 510 790 790 830 1,000 1,000 

– Wet weight5) kg 54.3 140.1 754 1,212 840 760 1,231 

Special accessories 

– Safety valves KV 30, KV 40 – – – – – 

– Foam thermal insulation – – WD 612 WD 1012 WD 650 WD 611 WD 1011 

9/18 kW, 18/18 kW 

3/N/PE ~ 400 V 

3) Regulations vary according to local power supply company; to be connected only by a 

qualified electrician. 

4) Including water supply connector. 

5) Before installing ensure floor has sufficient load-bearing capacity. 

62 | 63

VALVES/TAPS 

FOR OPEN DHW CYLINDERS AND WATER HEATERS 

For kitchens | mounted on the sink 

Type WST-K WUM WUT MESL MES 

– Part. no. 074428 222433 222432 222442 222440 

– Description Sink mixer tap with 

swivel spout, 

eyelet for plug chain, 

flexible water connection 

hoses, exclusive design 

– Optional combinations SNU 5 SL, UFP 5 t, SNU 10 SL 

For kitchens | mounted on the sink For kitchens | mounted over the sink 

* For non-pressurised operation. 

Twin-lever sink 

mixer tap with swivel 

spout, eyelet for plug 

chain, exclusive design 

Sink mixer tap with 

swivel spout, 

eyelet for plug chain, 

exclusive design 

Mono-lever sink mixer 

tap for single hole 

installation. Cast spout 

with perlator and 

endstop, brass body, 

chrome finish 


Mono-lever sink mixer 

tap with swivel spout, 

spout reach 230 mm, 


Type MESB WKM MEK 

– Part. no. 222441 222434 222443 

– Description Mono-lever sink mixer tap with removable Twin-lever wall mounted kitchen Mono-lever wall mounted kitchen 

rinser head, spout reach 244 mm, 

mixer tap with swivel spout, spout mixer tap with swivel cast spout, spout 


reach 160 mm, exclusive design reach 185 mm, exclusive design 

– Optional combinations SNU 5 SL, UFP 5 t, SNU 10 SL UFP 5 h, SN 5 SL, SN 10 SL, SN 15 SL, SHZ LCD*, SH SL*, HFA-Z*, SNZ 80 S 2 /3

VALVES/TAPS 

FOR OPEN DHW CYLINDERS AND WATER HEATERS 

For bathrooms | for basins 

Type WST-W WST WSM MEW 

– Part. no. 074427 222430 222431 222439 

– Description Basin mixer tap with swivel 

spout, eyelet for plug chain, 


– Optional combinations SNU 5 SL, UFP 5 t, SNU 10 SL 

For bathrooms | for showers for baths 

* For non-pressurised operation. 

Basin mixer tap with swivel 

spout, eyelet for plug chain, 


Twin-lever basin mixer tap 

with swivel spout and lift rod 

drain set, exclusive design 

Type WDM MED WBM MEB 

– Part. no. 222435 222444 222436 222445 

– Description Twin-lever shower-wall mixer 

tap with metal shower hose, 

1500 mm, shower hand set, 


Mono-lever shower wall mixer 


1500 mm, shower hand set, 


Twin-lever bath wall mixer 


1250 mm, and shower hand set, 


– Optional combinations EB 15 S, SN 15 SL, SHZ LCD*, SH SL*, HFA-Z*, SNZ 80 S 2 /3 SHZ LCD*, SH SL*, HFA-Z*, SNZ 80 S 2 /3 

Mono-lever basin mixer tap 

with fixed cast spout and lift 

rod drain set, exclusive design 

Mono-lever bath wall mixer 


1250 mm, and shower 

hand set, exclusive design 

64 | 65

VALVES/TAPS 

FOR INSTANTANEOUS WATER HEATERS 

For bathrooms | for baths For kitchens | oversink 

Type WBMD WKMD 

– Part. no. 222438 222437 

– Description Twin-lever bath wall mixer tap with metal 

shower hose, 1250 mm, and shower hand set, 


Twin-lever, kitchen wall mixer tap with swivel spout, 

160 mm spout reach, exclusive design 

– Optional combinations DHE, DEL, DHB E, DHB UNI, HDB, DHF-C DHE, DEL, DHB E, DHB UNI, HDB, DHF-C 

SAFETY ASSEMBLIES 

FOR SEALED DHW CYLINDERS 

Type KV 30 KV 40 KV 307 TA 260 

– Part. no. 000826 000828 000757 003466 

– Description Safety assembly, 6 bar op. 

pressure, with a funnel 

Safety assembly, 6 bar op. 

pressure with pressure 

reducing valve up to 10 bar 

and a funnel 

– Optional combinations SH 10 S, SH 15 S, SHZ 30 – 150 LCD, SH 30 – 150 S, HFA-Z 30 – 150, SHD 30 – 100 S 

Safety assembly, 7 bar op. 

pressure, with a in funnel. 

Thermostatic valve for central 

pre-mixing. Only to be used 

conjunction with safety 

assemblies.

Legal notice | The information in this brochure cannot be guaranteed to be error-free, despite careful checking. The statements concerning equipment and 

equipment characteristics are non-binding. The equipment features that are described in this brochure are not considered to be agreed conditions of our 

products. Individual equipment characteristics may differ or may even be removed, due to the ongoing development of our products. Information concerning 

the latest equipment characteristics can be obtained from our sales advisors. The illustrations in the brochure are merely application examples. The illustrations 

also contain installation components, accessories and special equipment that are not part of the standard delivery. Reprinting of all, or part, of this brochure 

only with the publisher's express permission.

STIEBEL ELTRON INTERNATIONAL GMBH | DR.-STIEBEL-STRASSE | 37603 HOLZMINDEN 

TEL +49 5531 7020 | FAX +49 5531 702479 | E-MAIL INFO@STIEBEL-ELTRON.COM | WWW.STIEBEL-ELTRON.COM 

ISSUE 03_08 | 278287_L_5_03_08_BKN

HOT WATER OUR ELEMENT - Stiebel Eltron

Create successful ePaper yourself

Delete template?

Save as template?