HT 800 WP Interchangeable Insert Drills

Available in Fall 2010:
HT 800 WP Interchangeable Insert Holders 1 x D
for pilot drilling and countersinking (Series 4105)
Series 4111 HT 800 WP Insert with
150º point geometry for pilot drilling
d 3
2 x interchangeable
inserts
d 1
l 4
l 2
l 1
45 o
Straight shank
DIN 6535-HE
d 2 h6
Expanded HT 800 WP size range -
up to 40mm (1.57”) in diameter
HT Insert
No. 4111
h
l 3
HT 800 WP Interchangeable Insert Holders
1.5 x D (Series 4106) and 10 x D (Series 4110)
Pilot drill body
10 x D drill body
Guhring continues to expand its insertable carbide drill offering with the addition of new styles and sizes. Starting in
the Fall of 2010 the HT 800 WP stocked standard offering will expand to include an extra length (10xD) holder, along
with a pilot drill holder and insert with a countersink pocket option. The size range of our holders will also increase to
40.0mm diameter for applications up to 1-1/2” in size. In addition, Guhring will offer special design options for quote.
www.guhring.com
Guhring, Inc.
P.O. Box 643, Brookfield, WI 53008-0643
Shipping Address
1445 Commerce Avenue
Brookfield, WI 53045
Tel (262) 784-6730 (800) 776-6170
Fax (262) 784-9096
West Coast Distribution Center
17902 Georgetown Lane
Huntington Beach, CA 92647
Guhring Corporation
20 Steckle Place, Unit #14
Kitchener, ON N2E 2C3
Tel (519) 748-9664 (800) 463-5555
Fax (519) 748-2954
01-5010