TDS - Axson North America, Inc
TDS - Axson North America, Inc
TDS - Axson North America, Inc
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
RIM855/RIM905<br />
Reaction Injection Molding<br />
Technical Data Sheet<br />
Flexural Modulus 219,500 psi (1,500 mPa)<br />
Tg 255°F (124°C)<br />
PROCESSING CONDITIONS<br />
Part B contains fillers which tend to settle during storage; remix to ensure a homogeneous product. Part B may be<br />
remixed through the use of an agitator on a dispensing machine or by hand; after remixing be sure to protect the<br />
material from moisture contamination through the use of a qualified dry blanket like <strong>Axson</strong> <strong>North</strong> <strong>America</strong>’s dry gas<br />
blanket. Both parts (polyol and isocyanate) must be mixed at a temperature higher than 65°F (18.5°C) according to<br />
the mix ratio above. Casting must be conducted in molds free of any trace of moisture. For further information<br />
please consult AXSON’s technical staff or AXSON’s technical data sheet about ANCILLARY PRODUCTS.<br />
Prior to unsupported post cure: Once demolded, ensure that the part has obtained a rigid state prior to<br />
unsupported post cure. Example: 1/8 inch part from 158°F (70°C) silicone mold may be post cured without support<br />
roughly 4 minutes after demolding, whereas a 1/8 inch part from a room temperature silicone mold can be post<br />
cured without support roughly 6 minutes after demolding. The time required prior to unsupported post cure is<br />
dependent upon the mold temperature as well as the geometry of the part being fabricated.<br />
Optimum properties of the material are obtained after a 14 hour post cure at 176°F (80°C)<br />
STORAGE CONDITIONS<br />
Shelf life is 1 year (12) months when stored at 77°F (25°C) in original, unopened containers.<br />
HANDLING PRECAUTIONS<br />
Possibly irritating to the respiratory system and to skin. Always wear appropriate personal protection. Avoid<br />
fumes, use only in a well ventilated area. If skin contact occurs, wash immediately with soap and water; if<br />
irritation develops contact a physician. In the event of an eye splash, wash the contaminated eye with water for<br />
at least 15 minutes and immediately seek medical help. If ingested, contact a physician.<br />
Consult the MSDS for further information.<br />
GUARANTEE<br />
The information presented in this technical data sheet are based on results of tests conducted under precise conditions. It is the responsibility of<br />
the user to determine the suitability of AXSON products, under their own conditions, before commencing with application. AXSON refuses any<br />
guarantee concerning the compatibility of a product with any particular application. AXSON disclaims all responsibility for damage from any<br />
incident which results from the use of these products. The guarantee conditions are regulated by our general sale conditions.<br />
Page 2/2- Rev. 03 August 10, 2009<br />
AXSON NA USA AXSON GmbH AXSON IBERICA AXSON BRASIL AXSON SHANGHAI AXSON JAPAN<br />
1611 Hults Drive Dietzenbach Barcelona Sao Paulo Shanghai OKAZAKI CITY<br />
Eaton Rapids, MI Tél. (++49) 60 74 407110 Tel. (++34) 93 225 16 20 Tel. (++55) 11 5687 7331 Tel. (++86)-58 68 30 37 Tel.(++81) 564 26 2591<br />
48827<br />
Tel. (517) 663-8191 AXSON Italie AXSON UK Limited AXSON MEXICO AXSON France<br />
Fax (517) 663-0523 Saronno Newmarket Mexico DF Cergy<br />
Email : info@axson-na.com Tel. (++39) 02 96 70 23 36 Tel. (++44) 1638 660 062 Tel. (++52) 55 5264 49 22 Tél. (++33) 1 34 40 34 60<br />
Email : axson@axson.fr
Change language