User Manual - Remington Sporting Dog

More documents

Recommendations

Info

Remington ® Sporting Dog appreciates your continued confidence in our products. The No Bark Collar features advanced technology with its dual detection system (the VIBRATION SENSOR and the SOUND SENSOR). This technology allows the unit to use both sound and vibration simultaneously to trigger an automatic impulse/stimulation, as well as preventing false corrections occurring from sources in your dog’s environment. The VIBRATION SENSOR will not allow false correction for things such as friction on the collar unit (example: metal choker chains, metal dog bowls). Similarly, the SOUND SENSOR will not allow false correction from any noise in the vicinity of the dog, including another dog barking. Our commitment is to provide safe, high quality training instruments that are reliable for both human and dog. We believe that this commitment will be apparent to you when using the Remington No Bark Collar. Components included in this package 1 Battery installation 2 Program mode information 3 – 5 Fitting the collar unit on the dog 6 Safety statement 7 Warranty 8 – 9
2 1) Unscrew the silver battery cover (we recommend using a quarter). 2) Insert the CR2 3V lithium battery with the positive (+) side of the battery so that it will be up against the silver battery cover when screwed back on. 3) After inserting the battery in the collar unit, replace the cover and secure. The unit will remain on until the battery is removed. (NOTE: Be sure to screw battery cover back on tightly, using a quarter or appropriate tool, to insure the unit stays waterproof.) Upon securing the cover, you will hear 3 beep tones indicating the unit is on. Your collar is now ready for programming. NOTE: When replacing this battery, use a CR2 3V lithium battery only. The Remington ® Sporting Dog No Bark collar unit operates in 2 modes: the ELEVATING PROGRAM MODE and the FIXED PROGRAM MODE. The ELEVATING PROGRAM MODE automatically increases impulse / stimulation as your dog barks until it stops barking: • When your dog barks once, the collar unit will emit a warning beep tone. If he barks again within 2 minutes, an impulse/stimulation will be delivered from the unit at its lowest level. • If your dog continues to bark, the impulse/stimulation will increase proportionately to the duration of the barking, until he stops barking. • If your dog barks again within 1 minute of the previous impulse / stimulation, the impulse/stimulation resumes at the same level that previously stopped the barking. • If your dog begins barking after 1 minute from the previous impulse / stimulation, the process starts again with the warning beep and, if he does not stop barking, proceeds to the impulse/ stimulation at the lowest level, increasing proportionately until he does stop. • This process will teach the association between barking and being impulse/stimulated until the dog stops the unwanted barking.
Page 4 and 5: 24 • Place the magnet key ring en
Page 6: Remington ® Sporting Dog warrants

User Manual - Remington Sporting Dog

Create successful ePaper yourself

Delete template?

Save as template?