Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Connecting to a Power Source<br />
You should use the rechargeable battery (SLB-0837) supplied with the camera.<br />
Be sure to charge the battery before using the camera.<br />
SLB-0837 rechargeable battery Specification<br />
Model<br />
Type<br />
Capacity<br />
SLB-0837<br />
Lithium Ion<br />
860mAh<br />
Voltage 3.7V<br />
Charging time<br />
(When the camera is turned off)<br />
Approx. 150 MIN<br />
You can charge the rechargeable battery (SLB-0837) by using the SAC-45 KIT<br />
which consists of the AC adapter (SAC-45) and the USB cable (SUC-C2).<br />
When the SAC-45 and SUC-C2 are combined, they can be used as an AC<br />
cable.<br />
Using an AC cable<br />
: Connect the AC adapter to the USB cable.<br />
It can be used as a power cable.<br />
INFORMATION<br />
Important information about battery usage.<br />
When the camera is not used, turn off the camera power.<br />
Please remove the battery if the camera will not be used for long periods.<br />
Batteries can lose power over time and are prone to leaking if kept inside<br />
the camera.<br />
Low temperatures (below 0˚C) can affect the performance of the battery<br />
and you may experience reduced battery life.<br />
Batteries will usually recover at normal temperatures.<br />
During extended use of the camera, the camera body may become warm.<br />
This is perfectly normal.<br />
When you use earphones, do not remove the battery while the camera is<br />
turning on. It may generate a loud noise.<br />
Using a USB cable<br />
: Remove the AC adapter (SAC-45).<br />
You can download stored images to your PC<br />
(p.104) or supply the power to your camera<br />
through the USB cable.<br />
9