ADVANCED MACHINERY

ADVANCED MACHINERY
Portable Vise & Clamping Systems
Do you struggle to securely hold your work Whether
you are an accomplished woodworker, an occasional
crafter, or simply a handyman around the house, you
know how important effective, easy clamping is for
both results and safety!
Advanced Machinery offers you two portable clamping systems which
securely hold virtually anything, anywhere. Any shape, any size, any
material - ingenious design and unsurpassed quality enable these
versatile and compact tools to handle even large jobs! And two
models let you choose what’s best for your needs and budget.
Incredibly easy to set up, our Portable Clamping Systems can be
mounted nearly anywhere in seconds: on a workbench, picnic table,
truck tailgate, plywood sheet, steel beam, or any other surface up to
2-3/4” thick. Our Clamping Systems feature one (z2) or two (SwissRex)
Quick Release Movable Jaws, allowing you to quickly move the jaw
next to your work piece so that minimal turning of the handle is
required to clamp the work
piece.
These powerful, precisely
machined jaws hold your
work firmly and securely
with minimal clamping
pressure, which is easily applied using the ergonomic handle. After
tightening, the handle can be instantly released into an "at-rest”
hanging position to avoid interfering with your work.

PORTABLE VISE AND CLAMPING SYSTEM
The NEW z2 Portable Clamping System
The new z2 is a unique homeowner's portable clamping tool
modeled after the original Swiss Vise that can hold virtually
anything, anywhere. Whether for construction, repair, carving,
boring, or finishing, the z2 can do it all!
The unique z2 System jaws have two clamping surfaces: one near the
table edge and one approximately five-and-one-quarter inches off
(above or below) the table. This creates unparalleled versatility: you can
hold more than one work piece at a time to set up joinery, gluing and
repair jobs with exceptional ease and simplicity. You’ll discover a world
of uses for your z2 System!
You can also flip the vise upside-down to create an even more unusual
and highly valuable setup for flat work. In the “low-jaw” grip, the
clamping surfaces protrude only 3/8” off the work surface - ideal for
gaining fully unobstructed access to the entire surface of a flat piece.
You can saw, sand, drill, plane, rout, carve and more, all without
repositioning your work or the clamp!
The z2 Portable Clamping System includes a quick-release outboard
jaw, two bench clamps, two turning centers, two soft jaws, the end
stop as well as two lower soft jaws, two aluminum jaw covers, two
tube jaws, a drill holder, a turntable, an owner's manual and an
instructional DVD. Everything is packaged in a black molded plastic
carrying case.
The z2 System is available exclusively from Advanced Machinery. It is
covered by a home-use Lifetime Warranty: just return any broken
metal part from your z2 system for a free replacement anytime – you
pay only a nominal handling charge for as long as you own the tool!
Call toll-free 1.800.727.6553 or visit our website @ www.advmachinery.com

PORTABLE VISE AND CLAMPING SYSTEM
The SWISSREX SuperVise Industrial
Portable Clamping System
The new SWISSREX SuperVise is a
super heavy-duty portable clamping
system manufactured in Switzerland
by RexMetall. Designed by the
inventor of the original z-Vise as a
heavy-duty commercial version with
many enhancements, superior design
and unsurpassed quality make this
industrial tool able to handle the most
demanding jobs!
Manufactured to exacting standards in the
heart of Switzerland, the SWISSREX SuperVise
is available in the USA and Canada exclusively
from Advanced Machinery. It's functions are
similar to those of the original z2 Portable
Clamping System except that it is substantially
heavier, stronger, and instead of one fixed and
one movable jaw, the SwissRex System features
two independently movable quick-release jaws which also function as
drill holders. Steel jaw covers, plastic jaw covers, tube & pipe jaws, and an
extension unit to enable clamping of large objects are also included.
It is covered by a Lifetime Warranty: just return any broken metal part
from your SWISSREX SuperVise for a free replacement anytime – you pay
only a nominal handling charge for as long as you own the tool!
Zyliss TORNO Lathe
Using the same portable
clamping design as the z2
Portable Clamping System,
this handy tool lets you
create beautiful and
valuable turnings almost
anywhere, powered by your
drill. The TORNO lathe
includes a sturdy mainframe,
tool rest, turning center, and live center. The lathe fits stock up to 22"
long and 7-1/2" in diameter. The drill you use to power the lathe must
have a collar diameter of either 43mm (Euro standard) or 38mm/1.5"
(common US standard). If your chuck is larger than the neck of the
drill holder, you may need to remove the chuck in order to install the
drill in your TORNO.
Call toll-free 1.800.727.6553 or visit our website @ www.advmachinery.com

ADVANCED MACHINERY ORDER FORM
SHIP TO:
Name ___________________________________________________________
Address _________________________________________________________
City ________________________________State _________Zip____________
(________) ______________________________________________________
Area Code Phone Number — Orders cannot be processed without phone number
METHOD OF PAYMENT:
▫ Check
# ____________________
▫ VISA ▫ Master Card ▫ Discover ▫ AmExpress
________________________________________________
Card Number
________________________________________________
Signature
Exp. Date
Call toll-freex
or Order online@ x
or Fax toll-freex
or Mail this form
1-800-727-6553
MON-FRI 9:00 am to 4:00 pm
Eastern Time. Please have credit
card & order ready when you call
www.advmachinery.com
Order 24 hours a day from
our secure server.
1-866-686-1615
Available 24 hours a day.
Advanced Machinery
P.O. Box 312
New Castle, DE 19720
QTY. ITEM# DESCRIPTION PRICE TOTAL
Z2 z2 PORTABLE CLAMPING SYSTEM. Includes a quick-release outboard jaw, two bench clamps, $299.00
two turning centers, two soft jaws, the end stop as well as two lower soft jaws, two aluminum jaw covers,
two tube jaws, a drill holder, a turntable, an owner's manual and an instructional DVD. Everything is
packaged in a black molded plastic carrying case.
S01 SWISSREX SUPERVISE PORTABLE CLAMPING SYSTEM. Comes complete with two independently $499.00
movable quick-release jaws which also function as drill holders, steel jaw covers, plastic jaw covers,
tube & pipe jaws, and an extension unit to enable clamping of large objects.
Z03 z2 SYSTEM PLASTIC JAW COVERS. These cover the upper jaw clamping surfaces to protect delicate $9.95
work pieces from being marred by the clamping pressure.
Z04 z2 SYSTEM CLAMP. The heart of the ingenious z2 design, these clamps hold your vise, and also can be $19.95
used separately as regular c-clamps. Spring-loaded for convenient setup, the clamps open up to a maximum
capacity of 2-3/4”, making them attachable to most surfaces. SOLD INDIVIDUALLY.
Z05 z2 SYSTEM END STOP. The unique z2 end stop may be mounted anywhere to provide a third clamping $39.95
surface, creating a virtually unlimited clamping capacity when used with a reversed quick-release jaw.
Z06 z2 SYSTEM TURNING CENTERS. These cleverly designed holders slip easily into position on $12.95
the jaws of your z2 and are used for holding pieces that need to be rotated while being
worked on. Sold Individually.
Z08 z2 SYSTEM LOWER PLASTIC JAWS. These perform the same function as the upper soft jaws supplied $9.95
with the basic vise, except that they cover the bottom part of the clamp instead of the top.
Z09 z2 SYSTEM ALUMINUM JAW COVERS. The aluminum covers are set over the large clamping faces of the $9.95
jaws to protect the clamping surfaces from the damage otherwise caused by metal or other hard objects
being held.
Z10 z2 SYSTEM TUBE CLAMPING JAWS. These jaws give your z2 the ability to hold round stock at any $14.95
angle. Instantly slipped into place over the standard vise jaws, tube jaws have grooves of varying sizes to
facilitate secure gripping of round stock.
Z11 z2 SYSTEM TURNTABLE. This accessory used to position your z2 at any angle needed for $39.95
convenient access to your work. The vise can be rotated on the turntable, while the turntable can be
positioned at any angle in the bench clamps.
Z12 z2 SYSTEM DRILL HOLDER. You can slide the drill holder manually, use one the jaws as a depth stop, or lock $39.95
the drill holder into place and use the vise crank to control drilling depth, creating a convenient drill press.
Z02 TORNO LATHE. Includes tool rest, turning center, and live center. Fits stock up to 22" long and 7-1/2" $149.95
in diameter.
ALL PRICES IN US DOLLARS.
SHIPPING AND HANDLING
FREE standard ground shipping within the 48 states.
Call for expedited shipping rates, or shipping outside the 48 states.
All prices subject to change without notice.
Merchandise Total
Handling
Expedited Shipping
TOTAL
$7.00