ADVANCED MACHINERY

ADVANCED MACHINERY ORDER FORM
SHIP TO:
Name ___________________________________________________________
Address _________________________________________________________
City ________________________________State _________Zip____________
(________) ______________________________________________________
Area Code Phone Number — Orders cannot be processed without phone number
METHOD OF PAYMENT:
▫ Check
# ____________________
▫ VISA ▫ Master Card ▫ Discover ▫ AmExpress
________________________________________________
Card Number
________________________________________________
Signature
Exp. Date
Call toll-freex
or Order online@ x
or Fax toll-freex
or Mail this form
1-800-727-6553
MON-FRI 9:00 am to 4:00 pm
Eastern Time. Please have credit
card & order ready when you call
www.advmachinery.com
Order 24 hours a day from
our secure server.
1-866-686-1615
Available 24 hours a day.
Advanced Machinery
P.O. Box 312
New Castle, DE 19720
QTY. ITEM# DESCRIPTION PRICE TOTAL
Z2 z2 PORTABLE CLAMPING SYSTEM. Includes a quick-release outboard jaw, two bench clamps, $299.00
two turning centers, two soft jaws, the end stop as well as two lower soft jaws, two aluminum jaw covers,
two tube jaws, a drill holder, a turntable, an owner's manual and an instructional DVD. Everything is
packaged in a black molded plastic carrying case.
S01 SWISSREX SUPERVISE PORTABLE CLAMPING SYSTEM. Comes complete with two independently $499.00
movable quick-release jaws which also function as drill holders, steel jaw covers, plastic jaw covers,
tube & pipe jaws, and an extension unit to enable clamping of large objects.
Z03 z2 SYSTEM PLASTIC JAW COVERS. These cover the upper jaw clamping surfaces to protect delicate $9.95
work pieces from being marred by the clamping pressure.
Z04 z2 SYSTEM CLAMP. The heart of the ingenious z2 design, these clamps hold your vise, and also can be $19.95
used separately as regular c-clamps. Spring-loaded for convenient setup, the clamps open up to a maximum
capacity of 2-3/4”, making them attachable to most surfaces. SOLD INDIVIDUALLY.
Z05 z2 SYSTEM END STOP. The unique z2 end stop may be mounted anywhere to provide a third clamping $39.95
surface, creating a virtually unlimited clamping capacity when used with a reversed quick-release jaw.
Z06 z2 SYSTEM TURNING CENTERS. These cleverly designed holders slip easily into position on $12.95
the jaws of your z2 and are used for holding pieces that need to be rotated while being
worked on. Sold Individually.
Z08 z2 SYSTEM LOWER PLASTIC JAWS. These perform the same function as the upper soft jaws supplied $9.95
with the basic vise, except that they cover the bottom part of the clamp instead of the top.
Z09 z2 SYSTEM ALUMINUM JAW COVERS. The aluminum covers are set over the large clamping faces of the $9.95
jaws to protect the clamping surfaces from the damage otherwise caused by metal or other hard objects
being held.
Z10 z2 SYSTEM TUBE CLAMPING JAWS. These jaws give your z2 the ability to hold round stock at any $14.95
angle. Instantly slipped into place over the standard vise jaws, tube jaws have grooves of varying sizes to
facilitate secure gripping of round stock.
Z11 z2 SYSTEM TURNTABLE. This accessory used to position your z2 at any angle needed for $39.95
convenient access to your work. The vise can be rotated on the turntable, while the turntable can be
positioned at any angle in the bench clamps.
Z12 z2 SYSTEM DRILL HOLDER. You can slide the drill holder manually, use one the jaws as a depth stop, or lock $39.95
the drill holder into place and use the vise crank to control drilling depth, creating a convenient drill press.
Z02 TORNO LATHE. Includes tool rest, turning center, and live center. Fits stock up to 22" long and 7-1/2" $149.95
in diameter.
ALL PRICES IN US DOLLARS.
SHIPPING AND HANDLING
FREE standard ground shipping within the 48 states.
Call for expedited shipping rates, or shipping outside the 48 states.
All prices subject to change without notice.
Merchandise Total
Handling
Expedited Shipping
TOTAL
$7.00