VicForests Instructions Log Specifications
VicForests Instructions Log Specifications
VicForests Instructions Log Specifications
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10. Other Timber <strong>Specifications</strong><br />
10.1 Firewood<br />
Firewood may be specified as green or dry sales.<br />
The specification for firewood timber is provided within the Table 12.<br />
Table 12 – Firewood <strong>Specifications</strong><br />
Parameter<br />
Minimum small end diameter under bark<br />
Maximum large end diameter under bark<br />
Minimum number of defective quarters 4<br />
Pipe defect<br />
Minimum log length<br />
Maximum log length<br />
Loose gum veins, pockets or shakes<br />
Tight gum veins greater than 3 mm<br />
Tight gum veins less than 3 mm<br />
Stain<br />
Specification<br />
10 cm<br />
<strong>Log</strong>s over 80 cm must be split<br />
A minimum depth of 10 cm of solid wood,<br />
measured from the pipe to the outside of the log<br />
2.7 m<br />
Sloping grain 1 : 8<br />
Sweep<br />
13 m or less<br />
Unlimited<br />
Unlimited<br />
Unlimited<br />
Unlimited<br />
No pronounced bends or sharp sweep<br />
Species As per table in Attachment 6<br />
Unless stamped ‘CONTROLLED COPY’ in red, all printed copies of this procedure are uncontrolled. The latest<br />
version can be found in <strong>VicForests</strong> SharePoint– Sustainable Forest Management System<br />
Version: 2.4 Last Updated: 8/07/2013 Procedure Owner: Marketing – Manager<br />
Page 19 of 35