TABLE OF CONTENTS - Khalid S. Al-Shahrani
TABLE OF CONTENTS - Khalid S. Al-Shahrani
TABLE OF CONTENTS - Khalid S. Al-Shahrani
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
h) The working area shall be kept clean and safe. Used abrasive shall be<br />
removed without delay.<br />
i) Flammable casting materials shall be mixed under sufficient fresh air<br />
circulation only.<br />
j) Explosion proof agitators shall be used for mixing of flammable<br />
coating materials.<br />
k) Warning signs shall be provided for all areas where flammable coating<br />
materials will be stored mixed or applied. The sign shall define that<br />
area as hazardous zone and shall prohibit smoking open fire and<br />
welding.<br />
l) Explosion proof electrically powered equipment shall be used when<br />
using flammable casting materials (especially in confined areas)<br />
m) In closed areas ( eg inside of tanks. Etc) a sufficient ventilation shall be<br />
prohibited.<br />
n) The installation of the ventilation unit shall prevent unventilated<br />
corners. Special precautions shall be taken for all vapours heavier than<br />
air.<br />
0) The air circulation shall be so designed that the solvent vapour<br />
contents will be at least 20% below the explosion limit. The contents of<br />
solvent vapour shall not exceed 25% of the air volume.<br />
p) The ventilation unit shall be designed and installed in such a manner<br />
that condensation on the treated surfaces is prevented.<br />
8.19 SCOPE <strong>OF</strong> SERVICE<br />
Pre-Qualification Document <strong>Khalid</strong> S. <strong>Al</strong>-<strong>Shahrani</strong> Est. Page 69