CP Coalescer Filters - Bolland Machine

CP Coalescer Filters
For Industrial Applications
Racor’s industrial coalescer filters are
manufactured using a cellulose particulate
capture media and a resin impregnated
glass fiber coalescing core (no metal
core). This unique combination of medias
provides the industry with one of the
most efficient particulate and water
removal filters available. In addition to
high efficiency, the CP filter can provide
the customer with low initial pressure
drop and longer life when compared
with competitor products. These filters
remove free and emulsified water and
solid contamination from various types
of fuels and hydrocarbon fluids. 1, 5, 10,
and 25 micron filters ensure fuel quality
that meets or exceeds the fuel cleanliness
requirements of the Worldwide Fuel
Charter (ISO 4401 code 18/16/13), when
challenged with ASTM Type A3 test dust.
Typical applications include refineries
with process streams, finished product,
petrochemical plants, petrochemical
storage and distribution systems, and at
the point of consumption.
Note: Part number CP-20452-J meets
MIL-PRF-52308J requirements under
NSN 4330-01-477-7985.
Contact Information:
Racor Division
phone 800 344 3286
209 521 7860
fax 209 529 3278
racor@parker.com
Product Features:
®

Coalescer Pleated
Element Length (inches) 1
Element Diameter (inches)
54
58
End Cap Configuration
CP - 43 6 78 - S
Nominal Micron Rating
None
S
68
78
TB
Element End Yoke
Rubber Gasket Washer
Flat Metal Washer
Metal Lock Washer
Hex Nut
For Information:
7791
7537
20 ft lbs
Typical
10 ft lbs Knife Edge Seal
15 ft lbs Flat Seal
30 ft lbs
Minimum
30 ft lbs
Minimum
Micron Rating
Flow Direction
Water Removal Efficiency
Change-out Pressure
Ambient Temperature Range
Maximum Fuel Temperature
pH Range
appropriately matched

DISTRIBUTED BY:
or to Place an Order
Phone
Fax
Email
724-­‐846-­‐1290
724-­‐846-­‐5253
kevin@bollandmachine.com
Address 2718 Darlington Road
Beaver Falls, PA 15010
www.bollandmachine.com