Finger Print Recording - ADON SYSTEM

FINGERPRINT RECORDING 

Use Our Quality Fingerprinting Products to… 

Get Reliable Results! 

Setting the standard for quality 

fingerprint recording products 

for more than 50 years. 

Fingerprinting is an important process and 

a primary method for identifying individuals. 

With the proper fingerprint records, positive 

identification may be achieved. 

It is important that quality materials 

be used during the fingerprint taking 

process in order to obtain the most 

reliable results. 

There are presently four methods 

for taking fingerprints. Each 

utilizes one of the following elements: 

(1) an ink slab and roller; 

(2) PRINTMATIC Roller; (3) Porelon ® 

Pads, PRINTMATIC Impeccable 

Ceramic, Thermoplastic and 

Flawless Pads; and (4) KlearInk 

Ceramic Pads. 

SIRCHIE ® offers these products as 

well as a full line of equipment and supplies 

to complement each fingerprint taking 

method, including: 

• Fingerprint Inks 

• Ink Cleaning Supplies 

• Postmortem Fingerprinting Equipment 

• Fingerprint Record Cards 

• Educational Tools 

Customer satisfaction is of paramount importance. 

That’s why SIRCHIE ® is constantly striving 

to provide only the highest-quality products 

to its customers, and is dedicated to meeting 

the varying requirements of the many different 

law enforcement agencies and identification 

departments in the United States and around 

the world. 

Phone: (800) 356-7311 • Fax: (800) 899-8181 • Email: sirchie@mindspring.com • Shop On-Line: www.sirchie.com 99


Methods and Recommended Procedures 

FIG. 1—Roll the fingerprint ink evenly onto 

the slab. 

FIG. 2—Position the subject so that his/her 

forearm is parallel to the floor. 

FIG. 3—Next, roll the subject's right forefinger 

on the ink slab. 

Four Methods 

1. Ink Slab and Roller 

2. PRINTMATIC Roller 

3. Porelon ® Pads and PRINTMATIC Impeccable Ceramic, 

Thermoplastic and Flawless Pads 

4. KlearInk Ceramic Pads 

There are now four methods for recording fingerprints— 

with an Ink Slab and Roller; PRINTMATIC pre-inked roller; 

Porelon ® Pads and PRINTMATIC Impeccable Ceramic, 

Thermoplastic and Flawless Pads; and the KlearInk Ceramic 

Pads. There are advantages to all of these methods, 

and the choice between them is one based primarily 

on application. 

Method Advantages 

The Ink Slab and Roller method requires more skill than 

the pre-inked roller and pad method, but the prints obtained 

tend to be cleaner and of sharper contrast. That 

makes them ideally suited for computer enhancement 

and database storage. 

The pre-inked PRINTMATIC Roller method requires no 

advance preparation because it contains a built-in ink 

supply. The main advantage of this method is that it requires 

less skill to roll out a uniform coating of ink to obtain 

satisfactory prints. 

The pre-inked pad method is a SIRCHIE ® innovation 

that includes distinctively different ink pads: the Porelon ® 

Pads, the PRINTMATIC Impeccable Ceramic, Thermoplastic 

and Flawless Pads as well as the KlearInk Ceramic 

Pad. The pre-inked method combines the advantages 

of the slab and roller method with the best qualities and 

usefulness of pre-inked pads. 

Work Table Height 

For best results, the inking area and cardholder should 

be approximately 39" (99.1cm) from the floor. This height 

allows the forearm of a subject of average height to be 

approximately parallel to the floor, at which position it is 

best to roll and record fingerprints. SIRCHIE ® offers several 

fingerprint taking stations that are either pedestalmounted 

at the required height or of desktop design that, 

when placed on the average table top, will achieve the 

height required. 

Preparing The Ink Slab 

Slab and Roller Method: 

STEP 1—First, ink the roller. Apply a small amount (about 

a 1/4" [.6cm] stream) of fingerprint ink on the right side 

of the slab, toward the back. Roll a 2-3" (5.1cm-7.6cm) 

wide layer of ink on the back portion of the slab—lifting 

the roller off the slab after each stoke and returning 

to the starting point (do not use a back-and-forth 

motion with the roller). Repeat several times until a thin 

film of ink forms on roller. 

STEP 2—Next, using the same roller motion (without rolling 

back-and-forth), spread the layer toward the front 

edge of the slab until a smooth, uniform coating of 

ink forms. The front edge is where the fingerprints are 

rolled. When the ink on the front edge becomes too 

thin, replenish the roller on the back edge of the slab 

and repeat STEP 2. 

PRINTMATIC Method: 

Like the Slab and Roller method, the PRINTMATIC method 

requires that the operator roll ink onto an inking slab. 

The difference is that with the PRINTMATIC pre-inked roller, 

coating the slab requires only a few passes of the roller 

in the same direction to apply a thin, even layer of ink 

(Fig. 1). 

100 

SIRCHIE ® FINGER PRINT LABORATORIES, INC. • 100 Hunter Place, Youngsville, North Carolina 27596 USA


Methods and Recommended Procedures 

FIG. 4—Record the print onto the designated 

space on the record card. 

FIG. 5—Ink the remaining four fingers for a 

plain impression after printing the thumb. 

FIG. 6—Position all four fingers at a slight 

angle, pressing them on the record card. 

Pre-inked Pad Method: 

No advance preparation is needed to use pre-inked 

pads. However, the pad surface should be cleaned occasionally 

to remove oil and dirt deposits by wiping the 

surface lightly with a soft, dry, lint-free cloth. 

Inking and Rolling The Fingers 

NOTE: The following recommended procedure is practiced 

by the FBI. 

To avoid possible smearing, always begin the fingerprint 

taking procedure by inking and rolling the fingers on 

the right hand. 

It is recommended that each finger be inked and 

rolled individually (i.e., ink the thumb then roll it immediately, 

ink the forefinger, then immediately roll it, etc.). If 

all the fingers are first inked and then rolled, there is the 

chance some ink may be transferred from a finger as it 

is curled out of the way prior to rolling, thus causing that 

finger to print lightly when rolled. After the fingerprints on 

the right hand are recorded, ink and roll the fingers on 

the left hand. When that is accomplished, record the 

plain impressions of both hands. An examination of the 

fingerprint record card reveals that these steps follow the 

order of the space allotted for each set of impressions. 

1. The subject stands to the right and rear of the operator 

(Fig. 2). The operator grasps the subject’s right hand 

with his right hand, cupping his fingers over the subject’s 

fingers and tucking under those fingers not being 

inked. He uses his left hand to guide the finger being 

inked. The right thumb is inked and rolled first. The 

thumb is inked by rolling it from right to left, toward the 

subject’s body. The thumb is inked from nail to nail to a 

point just below the first joint. Apply ink one time only. 

2. Once the thumb is inked, immediately transfer the ink 

to the record card in the space numbered 1 (Right 

Thumb). Roll the thumb from the right side to the left 

side (toward the subject’s body). 

3. Next, ink the right forefinger by rolling the finger from 

left to right (away from the subject’s body, Fig. 3). Ink 

from nail to nail and just below the first joint. Transfer 

the ink to the record card by rolling from left to right 

in space No. 2 (Forefinger). Repeat this process for the 

remaining fingers by inking and rolling each finger individually 

(Fig. 4). 

4. Reposition the record card to permit adding impressions 

from the left hand. Ink the left thumb by rolling 

it from left to right (toward the subject’s body), and 

then transferring the ink to the record card, Finger No. 

6 space, by rolling from left to right. 

5. Ink the left forefinger by rolling it from right to left (away 

from the subject’s body). Transfer the ink to the record 

card by rolling it from right to left. Ink and roll the remaining 

fingers individually. 

6. Plain (Slap) impressions are taken last. Reposition the 

record card to permit entry to the bottom area of the 

record card. Ink the left thumb by pressing it straight 

down onto the ink pad. Transfer the ink to the Left 

Thumb box in the plain impression area. 

7. Ink the remaining four fingers of the left hand simultaneously 

by pressing them straight down onto the pad 

(Fig. 5). Position all four fingers at a slight angle and 

press them onto the plain impression area for the left 

hand of the record (Fig. 6). This angle is necessary to 

permit all four finger impressions to be recorded in the 

space provided. 

8. Repeat this procedure for the thumb and remaining 

fingers of the right hand. 


FINGERPRINT PADS 

Overview of PRINTMATIC Impeccable Ceramic Case U.S. Patent No. 6,725,802 

Three Options in One! 

Screw Mount Option 

Rubber Feet Option 

Magnetic Feet Option 

PRINTMATIC Impeccable Ceramic Case 

PRINTMATIC Impeccable Ceramic Cases are a 

unique addition to our fingerprint taking lineup. The 

multi-mount case is slightly smaller than our regular 

pre-inked pad case and is fashioned from high-impact, 

injection molded, copolymer polypropylene 

and features two-piece construction. Each case 

permits three-way mounting: screw it down to a table 

top, use the non-skid rubber feet on other sur- 

Permanent 

Screw Mount 

Adhesive Backed 

Magnetic Mount Strip 

faces like vinyl counter tops, or install the magnetic 

strips to use it on a metal cabinet or magnetic surface. 

When not in use, the tight-fitting lid protects 

the ink pad from airborne contaminants. 

Two specially formulated inks to choose from: a 

rich, high-contrast black stainfree ink and a clear ink. 

Ink pads are not replaceable due to pad construction. 

Simply dispose of the entire case when the ink 

supply is depleted. 

102 

Non-Slip, 

Adhesive 

Backed 

Rubber Feet 

LEADING FEATURES: 

• Screw down to a table top 

• Use non-skid rubber feet on finished surfaces 

• Magnetic strips are used on metal surfaces 

• Injection molded, high impact copolymer 

polypropylene 

• Two piece design 


Ink is removed from 

fingers in a SNAP! 

STEP 1: Ink left on finger 

after printing. 


PRINTMATIC Impeccable Ceramic Fingerprint Pads 

Compensates for poor technique and 

uncooperative subjects. 

STEP 2: To remove ink, rub 

fingers together. 

STEP 3: Fingers come 

clean! 

PRINTMATIC Impeccable Ceramic Fingerprint Pad 

The leading cause of poor impressions is over-inking of the fingers. The 

PRINTMATIC Impeccable Ceramic Fingerprint Pad System is able to compensate 

for poor technique and uncooperative subjects by not only controlling 

the amount of ink on the pad surface, but by eliminating 

the effects of overpressure. 

Through the use of a micro-pore space-age ceramic, 

PRINTMATIC Impeccable Ceramic Fingerprint 

Pads draw ink to the surface by capillary action. 

EZID ink is a stainfree, high-contrast, instant-drying, 

permanent ink. Ink pads not replaceable. 

EZID300 LEADING 

PARTICULARS: 

• Thousands and Thousands 

of Fingerprint Impressions 

• Stainfree, high-contrast, 

permanent ink 

• Dimensions: 2.875" x 5.5" x 1" 

(7.3cm x 14cm x 2.5cm) 

• Weight: 6 oz. (170g) 

CAT. NO. DESCRIPTION PRICE 

EZID300 Impeccable Ceramic Fingerprint Pad, 2.875" x 5.5" x 1" (7.3cm x 14cm x 2.5cm) $49.95 

PRINTMATIC Impeccable Ceramic Pocket 

Fingerprint Pads 

The EZID100 and EZID200 have the same quality 

features as the full-sized ceramic pad but are 

pocket-sized for maximum portability and convenience. 

Perfect for use in the field or office. 

EZID100/EZID200 LEADING PARTICULARS: 

• Stainfree, high-contrast, permanent ink 

• Dimensions: 1.625" dia. or 2" dia. (4.1cm or 5.1cm) 

No. EZID200 

No. EZID100 in use. 


EZID100 Impeccable Ceramic Pocket Fingerprint Pad, 1.625" dia. (4.1cm) $8.95 

EZID200 Impeccable Ceramic Pocket Fingerprint Pad, 2" dia. (5.1cm) $14.95 

EZID600 6 Pack of Impeccable Ceramic Pocket Fingerprint Pads, 1.625" dia. (4.1cm) $40.00 



Multi-Mount Fingerprint Ink Pad Cases U.S. Patent No. 6,725,801 

Three Options in One! 



Positive Action 

Snap Lock 

Living Hinge 


Multi-Mount Injection Molded 

Ink Pad Case 

This fingerprint pad case is so 

unique, we have a patent! Now, one 

single case fills all applications: screw 

it down to a tabletop or install the four 

(4) rubber non-slip feet and use it almost 

anywhere. Plus…each case is 

supplied with two (2) magnetic strips 

for use on metal surfaces. And you 

can carry it in a pocket. Our full line 

of pre-impregnated ink pads are now 

supplied in this multi-mount case. 

The case features a positive action, 

dual snap lock feature to secure the 

lid when not in use, and the integral 

living hinge will outlast ordinary metal 

hinges many times over. 

Injection molded with tough, durable, 

long lasting copolymer polypropylene, 

these cases will provide many 

years of maintenance-free service. 

Portable enough to fit inside a 

shirt pocket. 

Permanent 

Screw Mount 

Adhesive Backed 

Magnetic Mount Strip 

Non-Slip, 

Adhesive 

Backed 

Rubber Feet 

LEADING FEATURES: 

• Multi-Mount Injection molded 

Copolymer Polypropylene 

Case, black textured finish 

• Positive, dual snap-locking lid 

104 



PRINTMATIC Thermoplastic Ink Pad Option 

Plain impression (left) and 2X 

magnification (right). 

Rolled impression (top) and 2X 

magnification (bottom). 

PFP600 LEADING FEATURES: 

• Multi-Mount Injection molded Copolymer Polypropylene 

Case, black textured finish 

• Thermoplastic, micro-pore ink reservoir 

• Special formula non-fading, high contrast ink 

• Low cost, high value 

• Thousands of single impressions 

PFP600 SPECIFICATIONS: 

• Dimensions: 6.25" x 3" x .5" (15.9cm x 7.6cm x 1.3cm) 

• Weight: 2.7 oz. (76g) 

No. PFP600 

PRINTMATIC Thermoplastic Ink Pad 

Here's a new approach to self-contained fingerprint ink pads. This economical 

pad is fashioned from a porous, thermoplastic material. The thermoplastic 

pad features a pore size of 10 to 20 microns allowing for a long-lasting ink reservoir 

and literally thousands of fingerprint impressions. 

Capillary action within the pad instantly forces SIRCHIE ® 's special formula 

ink to the surface. It produces rich, non-fading, high-contrast black, permanent 

impressions. This ink has been tested utilizing our AFISgrade 

fingerprint comparison software and produces excellent 

results. 

Thermoplastic Pads are supplied in our injection molded, 

copolymer polypropylene, multi-mount cases. 

To remove ink residue, rub fingers together or use a dry paper 

towel as needed. 

Ink is removed 

from fingers in 

3 easy steps! 






clean! 


PFP600 PRINTMATIC Thermoplastic Ink Pad $18.95 

PFP902 Replacement PRINTMATIC Thermoplastic Pad $12.95 



PRINTMATIC Flawless Ink Pad Option 



No. PFP700 

PRINTMATIC Flawless Ink Pad 

This revolutionary concept for recording fingerprints features a specially designed 

microporous membrane with a pore size of 7 to 10 microns, affording a 

higher degree of detail in the fingerprint impression. It produces thousands of 

rolled and plain impressions. 

The benefits to the fingerprint technician become obvious when using the 

Flawless System. Through capillary action, the ink pad provides just the right 

amount of ink on its surface. Less pressure is needed when fingers are rolled 

across the pad’s surface so less distortion is transmitted to the resulting 

impressions. 

Flawless Ink Pads are supplied in our unique multi-mount, injection 

molded, copolymer polypropylene case with a positive, snap lock 

lid to protect ink surface from airborne contaminants. 

HIGH-QUALITY PRINTS—The stainless PRINTMATIC ink formula means 

simpler cleanup, and the ink produces sharp, well-defined and crisp 

prints with high contrast. 



PFP700 LEADING FEATURES: 

• Multi-Mount Injection molded Copolymer 

Polypropylene Case, black textured finish 

• Stainless Ink Formula 

• Sharp, crisp, high-contrast impressions 

• Over 10,000 single impressions 


• Dimensions: 6.25" x 3" x .5" 

(15.9cm x 7.6cm x 1.3cm) 

• Weight: 3 oz. (85g) 

Ink is removed 

from fingers in 

3 easy steps! 






clean! 

106 


PFP700 PRINTMATIC Flawless Ink Pad $20.95 

PFP702 Replacement PRINTMATIC Flawless Pad $13.95 



PRINTMATIC Ceramic Ink Pad Option 





No. PFP800 is used to roll subject's index finger for printing. 

No. PFP800 

PFP800 LEADING 

FEATURES: 

• Multi-Mount Injection- 

Molded Copolymer Polypropylene 

Case, black 

textured finish 

• Super smooth ceramic pad 

• Produces sharp, clear, 

permanent impressions 

• Ink dries on contact with 

card 

• Thousands and thousands 

of rolled and plain impressions 


• Dimensions: 6.25" x 3" x .5" 

(15.9cm x 7.6cm x 1.3cm) 

• Weight: 5 oz. (142g) 

PRINTMATIC Ceramic Ink Pad 

Our top-of-the-line, go anywhere fingerprint pad features a ceramic design. 

This extraordinary pad offers an approximate pore size of 4 microns, allowing 

for exceptional detail in resultant prints. One pad produces thousands of fingerprint 

impressions. The ink impregnated into this pad is specially formulated 

for use with ceramic material. The pad's rock-hard ink surface produces prints 

that are indistinguishable from those taken using the slab and roller method. 

This stainfree ink formula produces clean, sharp, 

high-contrast, fast drying, non-fading impressions 

each and every time. Roll a finger and capillary 

action in the ink reservoir forces fresh ink to the surface—not 

too much, 

not too little. 

PRINTMATIC Ceramic 

Ink Pads are supplied in 

our multi-mount, injection 

molded, copolymer 

polypropylene case 

for use practically anywhere. 

To remove ink residue, 

rub fingers together or 

use a dry paper towel 

as needed. 


PFP800 PRINTMATIC Ceramic Ink Pad $39.95 

Phone: (800) 356-7311 • Fax: (800) 899-8181 • Email: sirchie@mindspring.com • Shop On-Line: www.sirchie.com 

107


Porelon ® Fingerprint Pad Option 





• No Inking 

• No Rollers 

• No Ink Plates or 

Slab Cleaner 

SIRCHIE ® pads 

can be used 

with any record 

form. 

No. FPT265 

Porelon ® Fingerprint Pad 

This pocket-sized pad, introduced by SIRCHIE ® 

more than 20 years ago, is the accepted STAN- 

DARD by law enforcement worldwide. Each pad 

may be used to record thousands of fingerprints. A 

two-year supply of ink is impregnated in each pad 

(based on 75 O F with lid closed after use), and is excellent 

for use in the field or office. 

The thermal-impregnated fingerprint ink is 

non-fading and dries on-contact in seconds. 

Ink rises to the surface as required through 

capillary action of the microreticulated 

thermoplastic resin. Recorded fingerprints 

from this pad are accepted by 

state and federal agencies. 

The Porelon ® Pad utilizes the multi-mount, 

injection molded case for versatility in mounting 

options. 

To remove ink residue from fingers, see 

SIRCHIE ® ’s ink removal products. 

FPT265 LEADING 

PARTICULARS: 

• Permanent Ink 

• Temperature Use: 32-150 o F 

(0-65 O C) 

• Lifetime Molded Case 

• Multi-Mount Injection- 

Molded Copolymer Polypropylene 

Case, black 

textured finish 

• Quick, easy cleanup 

• Thousands of single impressions 

FPT265 SPECIFICATIONS: 

• Dimensions: 6.25" x 3" x .5" 

(15.9cm x 7.6cm x 1.3cm) 

• Weight: 3.7 oz. (105kg) 

108 


FPT265 Porelon ® Fingerprint Pad $21.75 

FPT268A Replacement Porelon ® Pad $16.25 



Pocket-Sized Fingerprint Pads 

Micro and Mini Fingerprint Pads 

These pocket-sized pads give you the same reliable, detailed prints as our regular 

Porelon ® pads. They are designed primarily for single fingerprint recording on checks, 

PMP100 SPECIFICATIONS: 

• Dimensions: .375" x 1.625" dia. 

(.9cm x 4.1cm dia.) 

• Net Weight: 0.5 oz. (14g) 

• Case: Polypropylene w/live 

hinge 

PMP1002 SPECIFICATIONS: 

• Stainfree Ink 

• Dimensions: .625" x 2" dia. 

(1.6cm x 5.1cm dia.) 



hinge 

documents, traffic summons, etc. 

Resultant print 

No. PMP100 

No. PMP1002 


PMP100 Micro Fingerprint Pad, .375" x 1.625" dia. (.9cm x 4.1cm) $10.95 

PMP1002 Mini Fingerprint Pad, .625" x 2" dia. (1.6cm x 5.1cm) $11.50 

No. PFP601 

No. PFP602 

PRINTMATIC Thermoplastic Pocket 


These pocket pads offer the same stainfree ink 

as our other thermoplastic pads and will provide 

thousands of single impressions. 

To remove ink , rub fingers together or use a dry 

paper towel. 

CITAKE Patrol Officer Pocket Porelon ® Kit 

This is an ideal kit for the traffic officer. Single fingerprints 

may be taken at the scene with almost 

instantaneous cleanup. One Micro Fingerprint Pad 

or the PRINTMATIC Thermoplastic Stainfree Pad 

and 6 hermetically-sealed, disposable 

Super Cleaner Towelettes 

are packaged in a 

convenient nylon pocket 

case. 

No. PMP200 



• Dimensions: .375" x 1.625" dia. 

(.9cm x 4.1cm) 



hinge 



• Dimensions: .625" x 2" dia. 

(1.6cm x 5.1cm) 



hinge 

PMP200 CONTENTS: 

6- FPT1C1 Super Cleaner 

Towelettes 

1- PMP100 Micro Fingerprint Pad 

(PMP200) or PFP601 Stainfree 

Pad (PMP200T) 

1- PMP2001 Nylon Pocket Case 

SPECIFICATIONS: 

• Dimensions: 

3.375" x 3.375" x 1.5" 

(8.6cm x 8.6cm x 3.8cm 

• Net Wt.: 1.8 oz. (51g) 


PFP601 

PFP602 

Thermoplastic Ink Pad, 

.375" x 1.625" dia. (.9cm x 4.1cm) 

Thermoplastic Ink Pad, 

.625" x 2" dia. (1.6cm x 5.1cm) 

$7.25 

$9.95 


PMP200 

PMP200T 

CITAKE Pocket Kit w/PMP100 

Pad 

CITAKE Thermoplastic Pocket 

Kit w/PFP601 Pad 

$14.25 

$13.00 


109

PRE-INKED ROLLERS 

Eliminate Ink Slab Disadvantage with the… 

PRINTMATIC 

Roller 

Advantage 

The PRINTMATIC Roller System combines the advantages 

of the Porelon ® pad and the ink slab and 

roller methods of fingerprint taking. Excellent clarity 

is obtainable with a properly executed slab and 

roller print, and it is as fast and easy as the Porelon ® 

pad method. 

Ink Slab and Roller Advantages —The quality of 

the inked area on the slab can be seen and judged 

prior to inking and rolling the fingers. Second, when 

a proper layer of ink is applied, the rigid slab surface 

and the thin layer of ink tend to prevent the 

over-inking of fingers. 

Ink Slab and Roller Disadvantages —It requires a 

relatively skilled technician to roll a thin and even 

layer of ink necessary to obtain exceptional fingerprint 

impressions. If the ink layer is too thick, spotty 

or uneven, it’s likely to produce poor prints. In fact, 

excess ink is the leading cause of poor fingerprint 

impressions. Another disadvantage is that it may be 

messy—ink may spatter and cleanup may be quite 

a task. 

The inked slab on the No. PIP200 

clearly depicts the ink picked up 

by the fingers when rolled onto 

the thin layer of ink applied by 

the PRINTMATIC Roller. 

The PRINTMATIC Roller Advantage—The system 

successfully eliminates the disadvantages of the 

ink slab and roller while retaining the advantages. 

A thin and even layer of ink can be applied to the 

ink slab, regardless of the operator’s skill because 

the ink reservoir is in the roller! In addition, cleanup 

is much easier because there is not much ink left on 

the slab after fingerprints are rolled. 

Ink Supply 

Capillary Flow 

How It Works—Porelon ® is a microporous plastic 

that acts both as an ink reservoir and an ink delivery 

system. Ink is held in thousands of interconnected 

pores within the roller. Larger interior pores 

provide high-ink capacity and permit the use of 

highly pigmented inks for high-contrast impressions. 

Ink is gradually and evenly delivered to the surface 

through a particularly fine pored outer layer by 

capillary action. 

110 



PRINTMATIC Fingerprint Ink Roller 



Convenience of a pad, but the performance of 

a slab! 

PRINTMATIC Fingerprint Ink Roller 

The PIP100’s hinged metal enclosure is designed to prevent environmental 

contamination and protect the roller surface between uses. A comfortable 

thermoset plastic handle allows for optimum roller control. 

1. Apply a thin, even layer of ink to the slab by making several light-pressure, 

one-way strokes of ink with the PIP100 Roller (see Step 1). 

2. Roll and record fingerprints onto the record card, one-at-a-time, in the same 

manner as other methods of fingerprint taking (see Steps 2 and 3). 

3. A closer examination of the slab reveals that the thin layer of ink is almost 

completely picked up by the rolled finger. As a result, the subsequent print 

will display clear fingerprint ridge detail. 

4. The operator is able to easily clean the slab simply by wiping it off with FPT1C 

Super Cleaner Towelettes (see Step 4). 



PIP100 SPECIFICATIONS: 


6" x 4.625" x 1.75" 

(15.2cm x 11.7cm x 4.4cm) 

• Net Wt.: 1 lb. (453g) 

Obtain Exceptional Results without the Usual Mess! 

STEP 1: A thin, even layer of 

ink is applied to the slab with 

the PIP100 Roller. 

STEP 2: Roll the fingers on the 

ink slab one-at-a-time, in the 

same manner as other methods 

of fingerprint taking. 

STEP 3: Record the inked finger 

in the appropriate box 

on the record card. 

STEP 4: After all prints are obtained, 

simply clean the slab 

with No. FPT1C Super Cleaner 

Towelettes. 


PIP100 PRINTMATIC Fingerprint Ink Roller $33.50 

PIP100R Replacement PRINTMATIC Porelon ® Roller $22.50 



PRINTMATIC Horizontal Roller 

The PRINTMATIC Horizontal Roller is a handy, versatile version of our superb PRINTMATIC pre-inked Porelon ® 

fingerprint roller. The No. PIP100H is designed for horizontal (parallel) ink-rolling of the slab. The unit’s high- 

impact, ABS-plastic tubular housing prevents environmental 

contamination when the roller is not in use. The 

PIP100H LEADING FEATURES: 

• Tubular housing to protect 

PIP100H also features a comfortable, easy-grip thermo- 

roller from the environment 

set plastic handle. This is an excellent replacement for ink 

• Deposits a uniform, ultra-thin 

layer of ink on the slab every 

and roller assemblies 

used in field 

time 

• Never over inks fingers 

• Good for thousands of impres- 

fingerprint taking 

sions 

PIP100H SPECIFICATIONS: 

kits. 

• Dimensions: 8.5" x 1.75" dia. 

(21.6cm x 4.4cm dia.) 

• Net Wt.: 6.6 oz. (187g) 

No. PIP100H is used to apply ink to an inking 

slab. 

No. PIP100H Roller with ABS-Plastic Tubular Housing cover. 

Obtain Full Palm Prints Easily with the PRINTMATIC Roller Systems! 

STEP 1A: A thin, even layer of 

ink is applied to the subject's 

palm with the PIP100H Roller. 

Or… 

STEP 1B: …Ink the subject's 

palm with the PIP100 Roller. 

Be certain to cover entire 

surface. 

STEP 2: Roll the subject's 

palm onto the record card 

using the AP300PIP for accurate 

palm print transfer. 

STEP 3: The resultant palm 

print record displays clear 

ridge detail without distortion. 


PIP100H PRINTMATIC Horizontal Roller $32.95 

PIP100R Replacement PRINTMATIC Porelon ® Roller $22.50 

Autopalm ® Image Transfer Roller Assembly 

Use either PIP100 or PIP100H PRINTMATIC Roller with 

the Autopalm ® Image Transfer Roller Assembly to roll 

and record palm prints. This is a high quality, bearingmounted 

image transfer 

roller assembly which provides 

the proper surface 

for creating accurate 

palm print images. 

Resultant palm print displays 

clear ridge detail. 

AP300PIP SPECIFICATIONS: 

• Dimensions: 5.5" x 5" x 4.5" 

(14cm x 12.7cm x 11.4cm) 

• Net Wt.: 11.9 oz. (337g) 

AP300PIP CONTENTS: 

1- AP2004 Image Transfer Roller 

1- AP3001 Foam Roller Frame Assembly 

4- SFL288 Rubber Feet, Adhesive 

Mount 

112 


AP300PIP Autopalm ® Image Transfer Roller Assembly (only) $21.95 



230T 

231T 

No. 231T 

World's best 

fingerprint slab 

ink! 

SEARCH ® Fingerprint 

Ink 

Specially formulated for 

fingerprint work only, this 

densely-black ink is free 

flowing, easily rolled and 

dries quickly on paper—but 

will remain soft and usable 

on the slab for days. This ink 

is not adversely affected 

by extreme temperature 

changes. It is used by large 

and small identification departments 

throughout the 

world. 

SEARCH ® Fingerprint Ink, 

2 oz. tube (59ml) 

SEARCH ® Fingerprint Ink, 

4 oz. tube (118ml) 

FINGERPRINT INK 

Fingerprint Slab Ink and Ridge Builder 

$4.75 

$6.50 

Spray Smooth Fingerprint Ink (aerosol) 

SIRCHIE ® ’s standard, high-quality fingerprint 

ink is available in a handy aerosol can. Simply 

spray it on the slab and roll it 

smooth like standard tube ink. 

It’s very efficient and easy to 

use. Does not contain fluorocarbons. 

Apply No. 232T to an ink slab and roll 

it out like standard tube ink. 

Bring excellent definition and clarity to fingerprint 

ridge structures. 


232T 

Spray Smooth Fingerprint Ink, 

aerosol, Net Wt. 4 oz. (113g) 

No. 232T 

$11.25 

Lansberry's Ridge Builder 

Lansberry’s Ridge Builder is applied to the finger 

bulbs before fingerprinting—making it possible to 

obtain legible fingerprints from brick masons, agricultural 

workers, the elderly, or anyone else who 

has poor fingerprint ridge structure. This product will 

help increase the number of successful latent print 

searches and subsequent comparisons by ensuring 

better initial fingerprint recordings. Available in 

two forms: liquid and disposable pads. Apply liquid 

with a cotton swab or wipe disposable pad on fingers 

before fingerprinting. 

No. LRB20T 


LRB20 Lansberry's Ridge Builder, 4 oz. (118ml) liquid $12.95 

LRB20T Lansberry's Ridge Builder Disposable Pads, 100 $24.95 

No. LRB20 


113

FINGERPRINT INK 

SupremInk Fingerprint Ink 

Tired of messy tubes that dispense an uncontrollable 

amount of fingerprint ink 

The design of the ink dispenser helps prevent slab over-inking. 

The SupremInk Advantage 

Even our developers were amazed at how easy 

SupremInk is to dispense, roll out and clean up. Only 

a few drops are needed to roll a thin, even layer of ink— 

perfect for producing fingerprints with superb ridge detail. 

It doesn't dry out on the ink slab, but dries almost 

immediately on contact with the fingerprint card. 

OUTSTANDING FEATURES: 

• Low Viscosity Ink—makes for 

easier dispensing and rolling 

• Quick Drying—ready before the 

next fingerprint is taken 

• Consistent Formulation—the first 

drop is as good as the last 

• Fast Cleanup—easily removed 

from fingers and ink slab by rinsing 

with water and wiping with 

a light towel 

• Ink dispenser's design helps 

prevent slab over-inking 

No. SUP2 

No. SUP4 

Experience the Ease of Fingerprinting with SupremInk 

Easy to dispense. 

Easy to roll out. 

Easy to clean up. 

114 


SUP2 SupremInk Fingerprint Ink, 2 fl. oz. (59ml) $4.75 

SUP4 SupremInk Fingerprint Ink, 4 fl. oz. (118ml) $6.50 



Disposable Ink Strips 

Disposable Ink Strips are great for recording elimination prints at the crime 

scene, as well as for child identification programs and other field applications. 

These strips feature a thin layer of our famous fingerprint 

ink sandwiched between two thin sheets of 

plastic. The ink strips produce excellent fingerprint 

images. 

Separating the two 

layers exposes the ink strip surface. 

Resultant prints using No. SIS15. 


SIS15 5" x 1" (12.7cm x 2.5cm) Disposable Ink Strips, 2400 ea. $92.00 

SIS35C 5" x 3" (12.7cm x 7.6cm) Disposable Ink Strips, 100 ea. $12.00 







SISH35X Disposable Ink Strip Holders, 5" x 3" (12.7cm x 7.6cm) $9.95/10 



Inking Slabs 

These high-quality, supersmooth 

4" x 10" (10.2cm x 

25.4cm) inking slabs provide 

optimum versatility and 

portability. A glass slab (No. 

FPT205) and two stainless 

steel versions are available. 

Both the FPT258 and FPT260 

Stainless Steel Inking Slabs 

feature predrilled mounting 

holes. 

No. FPT260 

No. FPT205 

No. FPT258 

Inking Slabs are pictured with the No. FPT262A SEARCH ® Easy-Grip Fingerprint Ink Roller 

(not included). 


FPT258 Stainless Steel Inking Slab, 4" x 10" (10.2cm x 25.4cm) $11.75 

FPT260 Stainless Steel Inking Slab, 5" x 12" (12.7cm x 30.5cm) $13.75 

FPT205 Glass Inking Slab, 4" x 10" x .1875" (10.2cm x 25.4cm x 0.5cm) $10.95 


115

FINGERPRINT INK ROLLERS 

SEARCH ® Super Fingerprint Ink Roller 

The roller assembly is designed to ensure operator comfort for effective ink spreading. The roller’s black 

wrinkle-finished steel frame provides the proper weight and balance for optimum control. The roller features 

a high-density, medium-soft composition rubber that will withstand repeated cleaning with harsh 

solvents. The roller bracket is designed to prevent the roller from 

touching the inking table when not in use. 

One of the 

finest ink rollers made! 

FEL100 LEADING PARTICULARS: 

• Finish: Epoxy-painted, black wrinkle 

• Materials: Cold-rolled steel 

• Roller: Centerless ground, Buna-N black, 

50 durometer 

FEL100 SPECIFICATIONS: 

• Dimensions: 7.25" x 4.875" x 1.875" 

(18.4cm x 12.4cm x 4.8cm) 

• Net Wt.: 10.4 oz. (294g) 

FRR400 SPECIFICATIONS: 

• Dimensions: 3.875" x 1.25" dia. 

(9.8cm x 3.2cm dia.) 

• Net Wt.: 3.7 oz. (104g) 


FEL100 4" (10.2cm) SEARCH ® Super Fingerprint Ink Roller $14.95 

FRR400 Replacement 4" (10.2cm) Fingerprint Ink Roller $6.50 

No. FPR200 

No. FPR300 

No. FPR400 

LEADING PARTICULARS: 

• Finish: Vinyl-clad aluminum 

platinum (gray) 

• Materials: Aluminum alloy 

and cold rolled steel 

• Roller: Centerless ground, 

Buna-N black, 50 durometer 

FPR200 SPECIFICATIONS: 

• Dimensions: 7.5" x 3" x 1.875" 

(19cm x 7.6cm x 4.8cm) 

• Net Wt.: 4.2 oz. (119g) 


• Dimensions: 7.5" x 4" x 1.875" 

(19cm x 10.2cm x 4.8cm) 

• Net Wt.: 5.4 oz. (153g) 


• Dimensions: 7.5" x 5" x 1.875" 

(19cm x 12.7cm x 4.8cm) 

• Net Wt.: 6.5 oz. (184g) 

Unified Fingerprint Ink Rollers 

The unified rollers feature a one-piece design 

which also prevents the roller from touching the inking 

table when not in use. The rugged, aluminum 

handle and rubber grip allow for operator comfort 

and control. The medium-soft, high-density rubber 

roller element will withstand repeated cleaning 

with harsh solvents. 

116 


FPR200 2" (5.1cm) Unified Fingerprint Ink Roller $8.75 







FINGERPRINT INK ROLLERS 

SEARCH ® Easy-Grip Fingerprint Ink Rollers 


• Finish: Vinyl-clad aluminum 


• Materials: Aluminum alloy 

and steel 

• Handle: Cast plastic, black 

• Roller: Centerless ground, 

Buna-N black, 50 

durometer 



5.625" x 2.875" x 1.5" 

(14.3cm x 7.3cm x 3.8cm) 

• Net Wt.: 4.7 oz. (133g) 

FPT262A SPECIFICATIONS: 


5.625" x 3.875" x 1.5" 

(14.3cm x 9.8cm x 3.8cm) 

• Net Wt.: 5.9 oz. (167g) 

FPT262B SPECIFICATIONS: 


5.625" x 4.875" x 1.5" 

(14.3cm x 12.4cm x 3.8cm) 

• Net Wt.: 7 oz. (198g) 

No. FPT262A 

These rollers feature unbreakable, customdesigned 

thermoplastic handles for maximum 

operator comfort and control. The frame 

design also keeps the roller off the inking 

table when not in use. A high-density, 

medium-soft rubber roller element withstands 

repeated cleaning with harsh solvents. 

No. FPT262B 

No. FPT262 


FPT262 2" (5.1cm) SEARCH ® Easy-Grip Fingerprint Ink Roller $8.75 

FPT262A 3" (7.6cm) SEARCH ® Easy-Grip Fingerprint Ink Roller $9.95 

FPT262B 4" (10.2cm) SEARCH ® Easy-Grip Fingerprint Ink Roller $12.25 




Ergonomically designed for maximum 

SEARCH ® ERGO Fingerprint Ink Roller 

The roller assembly is designed 

to ensure operator 

comfort for effective 

ink spreading. The roller’s 

black wrinklefinished 

steel frame 

provides the proper 

weight and balance for optimum 

control. The roller features a highdensity, 

medium-soft composition rubber 

that will withstand repeated cleaning with 

harsh solvents. The roller bracket is designed to 

keep the roller off the inking table during non-use 

(shown left). 

No. FPT262E 


FPT262E 4" (10.2cm) SEARCH ® ERGO Fingerprint Ink Roller $14.95 



117


Multi-Mount Fingerprint Cardholder 

Features three 

mounting 

options! 

No. FPT263 

Multi-Mount Injection molded Cardholder (Patent Pending) 

The FPT263 features space-age, rock-solid injection molded materials designed for extensive use and 

exceptional service. The moveable card retainer 

secures it in place with a positive, snap lock feature 

as shown to the right and the integral hinge assembly 

assures a lifetime of easy usage. 

Our design affords three multi-mount options 

featured below. It can be permanently mounted 

to wood or metal surfaces 

using screws. For 

temporary mounting, 

use the magnetic strips 

for steel cabinets and 

metal surfaces. For portable, 

desktop use, nonslip 

rubber feet are supplied. 

FPT263 LEADING FEATURES: 

• Multi-mount options with 

screws, rubber feet or magnetic 

feet 

• Positive Snap Lock secures 

record card 


• Material: Injection molded, 

black textured finish 


9.5625"W x 3.875"D x 1"H 

(24.3cm x 9.8cm x 2.5cm) 

• Weight: 12 oz. (340g) 

No. FPT263 features a snap lock closure to keep cards firmly in 

place. 

Experience the Versatility with Three Mounting Options 




118 


FPT263 Multi-Mount Injection molded Cardholder $15.95 


FPT264/FPT264A/FPT264B 


• Cardholder Base: Nickel 

plating and vinyl-clad, 


• Cardholder Materials: Vinylclad 

aluminum, platinum 

(gray) 



10.9375" x 3.875" x 1.125" 

(27.8cm x 9.8cm x 2.8cm) 

• Weight: 11.1 oz. (314.6g) 



26.25" x 4.4375" x 1.5625" 

(66.7cm x 11.3cm x 4cm) 

• Weight: 2.4 lbs. (1.1kg) 



39.25" x 4.4375" x 1.5625" 

(99.7cm x 11.3cm x 4cm) 



SEARCH ® Regular Fingerprint Cardholder 

This cardholder features a rugged, all-steel 

assembly, brushed-nickel finish steel base 

and a vinyl-covered aluminum frame. It 

holds standard 8" x 8" (20.3cm x 20.3cm) 

fingerprint record cards firmly in place. Eas- 

ily mount to a desk or tabletop with integral 

mounting brackets. 

Fingerprint Cardholders 

No. FPT264A 

No. FPT264 

SEARCH ® Duplex and Triplex Fingerprint Cardholders 

An ideal choice when multiple fingerprint records are required. Cardholders 

are permanently mounted on a platinum, vinyl-clad aluminum base. Each 

base features predrilled integral mounting brackets. 


FPT264 SEARCH ® Regular Fingerprint Cardholder $17.95 

FPT264A SEARCH ® Duplex Fingerprint Cardholder $32.95 

FPT264B SEARCH ® Triplex Fingerprint Cardholder (not pictured) $43.95 

SEARCH ® Clamp-On Fingerprint Cardholder 

This fingerprint cardholder is excellent for use at various locations because it can be mounted on almost 

any flat surface. The cardholder features an integral threaded clamping screw that provides a stable 

and slip-free mount. An overlapping “lip” allows for instant positioning. The FEL696A holds all standard 

8" x 8" (20.3cm x 20.3cm) record cards. 

Mount with clamping screw on almost 

any surface. 

FEL696A LEADING PARTICULARS: 

• Cardholder Finish: Black Powder Paint 

• Cardholder Materials: FPT263 Injection molded 

Cardholder; 0.090" (2.3mm) thick cold, rolled steel 

base plate 

• Mounting Clamp: 3/8-16" x 2" Threaded Clamping 

Screw 

FEL696A SPECIFICATIONS: 

• Overall Dimensions: 

9.5"W x 3.75"D x 3.5"H 

(24.1cm x 9.5cm x 8.9cm) 

• Weight: 2.25 lbs. (1kg) 


FEL696A SEARCH ® Clamp-On Fingerprint Cardholder $25.95 


119


PRINTOVER Tabs 

Use No. FPT109 tabs to 

cover poor impressions 

on standard record 

cards in order to reprint 

subject. 

No. FPT108R 

These opaque, adhesive-backed tabs are designed to cover poor impressions on standard fingerprint 

cards so individuals may be reprinted. They’re die cut to fit perfectly on 8" x 8" (20.3cm x 20.3cm) record 

cards. PRINTOVER Tabs are available in two formats: individually cut in packages of 1,000 or in rolls of 

100 and 500. 


FPT109 PRINTOVER Tabs, 1,000 individually cut tabs $21.95 

FPT107R PRINTOVER Tabs, roll of 100 $9.50 

FPT108R PRINTOVER Tabs, roll of 500 $21.00 

Fingerprint Record Cards 

No. FC330 (front and back view) 

Criminal Record Cards 

These standard 8" x 8" (20.3cm 

x 20.3cm) format criminal record 

cards feature a balance of super-smooth, 

brilliant white finish 

and fast-ink absorption. Printed 

on tough, 110 lb. index card stock 

with non-fading ink—and flexible 

enough that typewriters will not 

crease or wrinkle them. If ordering 

5,000 or more, the department’s 

name may be imprinted 

at no extra charge (specify when 

ordering). 

120 


FC330 Criminal Record Cards, 100 ea. $16.95 

FC330M Criminal Record Cards, 1,000 ea. $115.00 

FC330M5 Criminal Record Cards, 5,000 ea. $360.00 



Fingerprint Record Cards 

No. FD258 (front and back view) 

Applicant Record Cards 

These record cards are printed in process blue 

ink on 8" x 8" (20.3cm x 20.3cm) 110 lb. index card 

stock. Designed to the specifications of the U.S. Immigration 

and Naturalization Service, they’re available 

with or without a custom ORI number. 

CAT. NO. APPLICANT RECORD CARDS PRICE 

FD258 No Imprint, 100 ea. $19.95 

FD2585 No Imprint, 500 ea. $66.78 

FD258M No Imprint, 1,000 ea. $119.15 

FD258S With Imprint, 100 ea. $137.12 

FD258SM With Imprint, 500 ea. $219.80 

FD258SM5 With Imprint 1,000 ea. $497.00 


Child Fingerprint Cards 

These record cards are standard format 8" x 8" 

(20.3cm x 20.3cm) printed in process blue and designed 

specifically for fingerprinting children. Space 

is provided on the card for recording pertinent information 

about both the child and parents. The 

cards are printed on the best 110 lb. index card 

stock. They will not wrinkle or crease when placed 

in a typewriter. An excellent choice for “CHILD” 

identification programs. 


FC335 Child Fingerprint Cards, 500 ea. $16.95 

FC335M Child Fingerprint Cards, 1,000 ea. $115.00 

FC335M5 Child Fingerprint Cards, 5,000 ea. $360.00 

Student Fingerprint Recording Kit 

This kit is designed especially for student fingerprinting programs. It 

includes the identification supplies needed to assemble 200 individual 

student fingerprinting kits. The inventory includes fingerprint cards, ink 

strips, cleanup towelettes and small plastic bags. Have students assemble 

kits and pass them out 

at law enforcement functions 

and school fairs. 

FPTC1013 CONTENTS: 

200- Student Fingerprint Identification 

Cards, 8" x 8" (20.3cm x 20.3cm) 

200- SS151 Disposable Ink Strips, 1" x 5" 

(2.5cm x 12.7cm) 

200- FPT1C1 Super Cleaner Towelettes 

200- ZTE011 Zip-Top Plastic Bags, 4" x 6" 

(10.2cm x 15.2) 


FPTC1013 Student Fingerprint Recording Kit, 200 pack $99.95 


121


Record Cards 

Standard Palm Print Record Cards 

SIRCHIE ® ’s standard 8" x 8" (20.3cm x 20.3cm) 

format palm print record cards are printed on the 

best 110 lb. index card stock and are used by identification 

departments across the globe. 

CAT. NO. STANDARD PALM PRINT CARDS PRICE 

AP110 100 each $16.95 

AP110M 1,000 each $115.00 

AP110M5 5,000* each $360.00 

*FREE CUSTOM IMPRINT—orders of 5,000 or more can get department 

or agency's name printed on cards (specify when ordering). 

No. AP110 (front and back view) 

Diagonal Palm Print Record Cards 

These standard 8" x 8" (20.3cm x 20.3cm) cards 

feature a diagonal design for recording palm 

prints. Printed on the best quality 110 lb. index card 

stock, they are used by identification departments 

around the world. 

No. AP112 (front and back view) 

CAT. NO. DIAGONAL PALM PRINT CARDS PRICE 

AP112 100 each $16.95 

AP112M 1,000 each $115.00 

AP112M5 5,000* each $360.00 



Personal Record Cards 

These 8" x 8" (20.3cm x 20.3cm) record cards are 

intended for noncriminal applications. They are 

printed with non-fading ink on tough, 110 lb. index 

card stock. They’re ideal for law enforcement personnel 

records, as well as for use in other settings 

such as hospitals, security agencies, banks and 

schools. 

122 

CAT. NO. PERSONAL RECORD CARDS PRICE 

FC334 100 each $16.95 

FC334M 1,000 each $115.00 

FC334M5 5,000* each $360.00 






No. FC332 

Palm Print Card 

No. FC332 Tip Print Card 

Record Cards 

Major Case and Tip Print 

Cards 

These cards should be utilized 

on robbery suspects, as well as 

sexual assault, homicide and 

burglary suspects, because latent 

prints recovered from crime 

scenes may include palms, finger 

tips and finger joints. The FC332 

two-card system allows for easy 

storage in a conventional 8" x 8" 

(20.3cm x 20.3cm) record card 

file. The 8" x 16" (20.3cm x 40.6cm) 

forms are printed on the best 110 

lb. index card stock with a fold 

line in the middle. Inked impressions 

are recorded on the front 

and detailed instructions are on 

the back with space for the suspect’s 

personal information. 50 

each palm and tip print cards 

are provided. 


FC332 Major Case and Tip Print Cards, 50 sets $19.95 

FC3325 Major Case and Tip Print Cards, 250 sets $67.50 

Postmortem Record Strips 

These 8" x 1.5" (20.3cm x .4cm) record strips are designed specifically for use 

with the PMNS60 Postmortem Record Strip Holder or PMNS60B Folding Postmortem 

Strip Holder. They are offered in standard and adhesive backed. The record 

strips are printed on 110 lb. index card stock and feature a white finish that absorbs 

ink rapidly. They are an exact match to standard 8" x 8" (20.3cm x 20.3cm) 

fingerprint record cards. The adhesive-backed record strips adhere easily to 

standard fingerprint record cards. 


STANDARD POSTMORTEM RECORD STRIPS 

FC345L Left Hand, 100 ea. $10.75 

FC345L5 Left Hand, 500 ea. $44.75 

FC345R Right Hand, 100 ea. $10.75 

FC345R5 Right Hand, 500 ea. $44.75 

ADHESIVE BACKED POSTMORTEM RECORD STRIPS 

FC543L Left Hand, 100 ea. $12.25 

FC543L5 Left Hand, 500 ea. $46.50 

FC543R Right Hand, 100 ea. $12.25 

No. FC345L (actual size) 

FC543R5 Right Hand, 500 ea. $46.50 


123

RECORD CARD STORAGE 

Bureau Card File Cabinet 

Bureau Fingerprint and Palm Print Record 

Card File Cabinet 

For Standard 8" x 8" (20.3cm x 20.3cm) Cards 

These are the finest filing cabinets available for 

8" x 8" (20.3cm x 20.3cm) fingerprint record cards. 

Each drawer of the cabinet features a double 

compartment to accommodate two rows of 8" x 

8" cards. Each row will accommodate 2,000 cards; 

each drawer will accommodate 4,000 cards. 

The cabinet has five drawers—offering a capacity 

potential of 20,000-8" x 8" (20.3cm x 20.3cm) 

fingerprint record cards. Each cabinet is precisionbuilt 

to the smallest spring and catch. The case is 

made totally of heavy-gauge, cold-rolled steel. 

Every drawer moves effortlessly on thick, ribbedsteel 

guides and 10 roller bearings. 

Systematic spot-welding throughout assures 

structural integrity. This is a filing cabinet designed 

to endure years of continual service. Cabinets are 

available with or without a lock. 

Available in 

three colors: 

Black 

Tan 

Gray 

No. MSC100G 

124 

All file cabinets feature an adjustable divider in each drawer. 


BUREAU CARD FILE CABINETS without LOCK 

MSC100B Black Finish $1,495.95 

MSC100G Gray Finish $1,495.95 

MSC100T Tan Finish $1,495.95 

BUREAU CARD FILE CABINETS with LOCK 

MSC100BL Black Finish $1,555.95 

MSC100GL Gray Finish $1,555.95 

MSC100TL Tan Finish $1,555.95 


• Five Drawer 

• Double Compartment 

Drawers 

• Adjustable drawer divider 

• With or without lock 

• Heavy-Gauge, Cold-Rolled 

Steel Fabrication 

• Rib and Roller Bearing 

Drawers 

• Accommodates 20,000 Cards 

• Available in black, tan or gray 

finish 


51.625"H x 21.25"W x 28.625"D 

(131.1cm x 54cm x 72.7cm) 

• Weight: 275 lbs. (124.7kg) 



Fingerprint Video, Guide Cards and Wall Charts 

Fingerprint Instructional Videos 

This instructional video on fingerprint taking techniques takes you step-by-step 

through the proper procedure using the ink slab and roller method as well as newer 

methods such as pre-inked pads and the PRINTMATIC System. 

Experienced fingerprint technicians reveal many useful tips for recording perfect 

prints. One whole section is devoted 

to the proper method for recording 

palm prints. 

The Fingerprint Instructional Video is 

available on DVD (NTSC only) as well 

as the traditional VHS (NTSC) and international 

video format (PAL). 

No. FPV200 

No. FPV100 


FPV100 Fingerprint Video (VHS) $29.95 

FPV100IN Fingerprint Video (PAL) $39.95 

FPV200 Fingerprint Video (DVD) $32.95 

Blank Metal Tab Guide Cards 

For 8" x 8" (20.3cm x 20.3cm) Fingerprint Record 

Cards 

These Blank Metal Tab Guide Cards are perfect 

for the No. MSC100 Bureau Fingerprint Card Cabinets. 

These guide cards are designed to allow departments 

to develop their own guide card system 

and expand as needed. Guides are constructed 

of durable pressboard stock. Steel tabs are firmly 

staked to the guide and furnished in position from 

first to fifth. Card strip inserts and a celluloid cover 

are furnished with each guide. 

No. FG228 

CAT. NO. BLANK TAB GUIDE CARDS PRICE 

FG228 100 ea. $186.00 

FG2285 500 ea. $765.00 

FG228M 1000 ea. $1,315.00 

No. FC348 

No. FC349 

Fingerprint Wall Charts 

The Fingerprint Pattern Chart illustrates nine of 

the most common fingerprint patterns on a 17" x 

22" (43.2cm x 55.9cm) format. It is a useful reference 

and teaching aid. 

The Fingerprint Comparison Chart illustrates and 

names common fingerprint comparison characteristics 

on a 17" x 22" (43.2cm x 55.9cm) format. Useful 

teaching tool. 


FC348 Fingerprint Pattern Wall Chart $14.95 

FC349 Fingerprint Comparison Wall Chart $14.95 


125


Fingerprint Taking Binder 

Ideal kit for 

portability and 

efficiency in the 

field elimination 

and identification of 

fingerprints. 

With the FPB100PF, roll and record the subject's fingerprints 

in the field and fold it back up for transportation (right). 

This portable fingerprint taking 

binder allows the investigator 

to conveniently and accurately 

obtain fingerprints in the field for 

elimination or identification. This is 

the ideal kit for maximum portability 

and efficiency. The binder 

comes complete with a mounted 

ink fingerprint pad, a mounted fingerprint cardholder, a handy pouch for storing 

record cards and 20 Super Cleaner Towelettes (No. FPT1C1). 

No. FPB100 Kit and Components 

FPB100 CONTENTS: 

1- FPT263 Injection molded Cardholder Frame 

1- FEL102K Fingerprint Cards Pouch 

1- FPB02 Towelettes Pouch 


1- FPT265 Porelon ® Pad (FPB100 only) 

1- PFP800 PRINTMATIC Ceramic Pad (FPB100CM only) 

1- PFP700 PRINTMATIC Flawless Pad (FPB100PF only) 

FPB100 SPECIFICATIONS: 

• Dimensions 

(closed): 12" x 10.125" x 1.5" (30.5cm x 25.7cm x 3.8cm); 

(open): 25" x 10.125" (63.5cm x 15.7cm) 


126 


FPB100PF PRINTMATIC Flawless Fingerprint Taking Binder $72.95 

FPB100CM PRINTMATIC Ceramic Fingerprint Taking Binder $86.95 

FPB100 Porelon ® Fingerprint Taking Binder $79.95 



Fingerprint Taking Outfits 

No. FFC100 (open view) 

Folding Fingerprint Taking Combination 

Recording fingerprints is now easier and more convenient than ever 

with our folding cardholder/ink pad combination. Excellent for use in 

the field or office. Made of sturdy platinum vinyl-clad aluminum. 

No. FFC100 hinged design makes it compact 

and easy to transport. 

FFC100 SPECIFICATIONS: 

• Dimensions 

(closed): 11.75" x 4.5" x 3" (29.8cm x 11.4cm x 7.6cm); 

(open): 22.75" x 4.5" (57.8cm x 11.4cm) 

• Weight: 1.9 lbs. (861g) 


FFC100PF PRINTMATIC Flawless Fingerprint Combo $66.00 

FFC100CM PRINTMATIC Ceramic Fingerprint Combo $74.00 

FFC100 Regular Porelon ® Fingerprint Combo $68.00 

No. SCC500S 

SCC500S/SCC400D LEADING 

PARTICULARS: 

• Cardholder Mount: Vinyl-clad aluminum, 

platinum base 

• Ink Roller Slab: Bright nickeloid 

0.032" (.8mm) thick 

SCC500S/SCC400D CONTENTS: 

1- FPT258 Ink Slab, mounted 4" x 10" 

(10.2cm x 25.4cm) 

1- FPT263 Injection molded Cardholder 

Frame (SCC500S only) 

2- FPT263 Injection molded Cardholder 

Frames (SCC400D only) 

SEARCH ® Ink Slab Fingerprint Taking Combinations 

The SEARCH ® Ink Slab and Cardholder Combinations feature a 

high-quality, stainless steel ink slab and one or two cardholders. The 

ink slab and cardholder(s) are mounted on a common base with integral 

mounting brackets and pre-punched holes for mounting. Each 

unit’s durable construction ensures years of reliable service. 


SCC500S SEARCH ® Fingerprint Combo, single cardholder $33.75 

SCC400D SEARCH ® Fingerprint Combo, double cardholder $41.25 


127

FINGERPRINTING KITS 

Fingerprint Taking Combinations 

No. FPT269 

PRINTMATIC Fingerprint Taking Combinations 

The PRINTMATIC Fingerprint Taking Combinations feature a fingerprint 

pad and cardholder(s) mounted on a common base. Available with one 

or two cardholders and a choice of a Regular Porelon ® Pad or a PRINTMATIC 

Fingerprint Pad (Flawless or Ceramic). Each platinum-finished, aluminum 

base features integral mounting brackets with pre-punched holes for 

mounting. 


FPT269PF PRINTMATIC Flawless Combo w/single cardholder $39.95 

FPT269APF PRINTMATIC Flawless Combo w/double cardholder $49.00 

FPT269CM PRINTMATIC Ceramic Combo w/single cardholder $47.90 

FPT269ACM PRINTMATIC Ceramic Combo w/double cardholder $57.00 

FPT269 Regular Porelon ® Combo w/single cardholder $42.90 

FPT269A Regular Porelon ® Combo w/double cardholder $52.20 

FPT269/FPT269A LEADING 

FEATURES: 

• Cardholder Mount: Vinylclad 

aluminum, platinum 

(gray) 

• Brackets for table mounting 

• Efficient, durable and attractive 

FPT269/FPT269PF/FPT269CM 



26.25" x 4.4375" x 1.5625" 

(66.7cm x 11.3cm x 4cm) 

• Net Wt.: 2.1 lbs. (952g) 

FPT269A/FPT269APF/ 

FPT269ACM 



39.25" x 4.4375" x 1.5625” 

(99.7cm x 11.3cm x 4cm) 

• Net Wt.: 3.2 lbs. (1.4kg) 

FPT269/FPT269A CONTENTS: 

1- FPT263 Injection Molded Fingerprint 

Cardholder (FPT269 only) 


Cardholders (FPT269A only) 

1- FPT265 Porelon ® Fingerprint Pad 

(FPT269, FPT269A) 

1- PFP700 PRINTMATIC Flawless 

Fingerprint Pad (FPT269PF, 

FPT269APF) 

1- PFP800 PRINTMATIC Ceramic 

Fingerprint Pad (FPT269CM, 

FPT269ACM) 

No. PIP200 

PRINTMATIC Fingerprint Taking Outfits 

These fingerprint taking outfits feature the PRINTMATIC Pre-inked 

Roller System. Outfits come with a glass inking slab, and a choice of 

one or two injection molded fingerprint record cardholders (FPT263). 

The double cardholder unit is ideal for multiple fingerprint records. 

Each platinum-finished, aluminum base features integral mounting 

brackets with pre-punched holes for mounting. 

PIP200/PIP300 CONTENTS: 

1- FPT205 4" x 10" (10.2cm x 25.4cm) Glass 

Inking Slab 

1- FPT263 Injection molded Fingerprint 

Cardholder (PIP200 only) 

2- FPT263 Injection molded Fingerprint 

Cardholders (PIP300 only) 

1- PIP100 PRINTMATIC Porelon ® Fingerprint 

Ink Roller System 

128 


PIP200 PRINTMATIC Outfit w/single cardholder $76.50 

PIP300 PRINTMATIC Outfit w/double cardholder $84.50 



PRINTMATIC Impeccable Ceramic Pad Combinations 

No. EZID002 

EZID001 SPECS: 


26.25" x 4.4375" x 1.5625" 

(66.7cm x 11.3cm x 4cm) 




39.25" x 4.4375" x 1.5625" 

(99.7cm x 11.3cm x 4cm) 




46" x 4.4375" x 1.5625" 

(117cm x 11.3cm x 4cm) 


Three Easy Steps: 

STEP 1: Remove case top. 

No. EZID001 

EZID Portable Fingerprint Stations 

Featuring No. EZID300 PRINTMATIC Impeccable Ceramic Pad 

These stations feature our Impeccable Ceramic Fingerprint Pad and cardholder(s) 

mounted on a common base. Available with one, two or three injection 

molded cardholders (FPT263). Each platinum, vinyl-finished aluminum 

base features integral mounting brackets with pre-punched holes for permanent 

mounting. 


EZID001 EZID300 Portable Fingerprint Station w/single cardholder $62.90 

EZID002 EZID300 Portable Fingerprint Station w/double cardholders $72.50 

EZID003 EZID300 Portable Fingerprint Station w/triple cardholders $84.25 

Crime Scene Fingerprint Elimination Kit 

Featuring No. EZID200 PRINTMATIC Impeccable Ceramic Pocket Pad 

This kit is designed to aid in eliminating latent prints found at the crime scene 

of those who have legitimate access. The recorded fingerprints are then submitted 

along with the lifted latent prints for examination and elimination by the 

technical staff before file or AFIS searching. 

Black vinyl-finished aluminum construction, the kit has a two-piece configuration 

with magnetic catches for easy removal and recovery. 

STEP 2: Roll and ink fingers 

to print. 

EZID009 SPECIFICATIONS: 


11.125" x 4.125" x .9375" 

(28.3cm x 10.5cm x 2.4cm) 

• Weight: 1.3 lbs. (589g) 

STEP 3: Record fingerprints 

on pad. 

No. EZID009 

EZID009 CONTENTS: 

1- EZID200 PRINTMATIC Impeccable 

Ceramic Pocket Pad, 2" (5.1cm) 

dia. (thousands of impressions) 

1- FPT270A Elimination Pad, 50 sheets 

1- EZID009C Black vinyl-finished aluminum 

carrying case 


EZID009 Crime Scene Fingerprint Elimination Kit $49.95 


129

FINGERPRINT STATIONS 


Roll and record 

prints at regulation 

height. 

No. PFT200A 

No. PFT100A 


SIRCHIE ® ’s PRINTMATIC Fingerprint Taking Outfits may be placed 

on any desk or table to achieve regulation height for rolling and recording 

fingerprints. Available with one or two fingerprint cardholders, 

each outfit comes with a Regular Porelon ® or our series of PRINTMATIC 

Fingerprint Pads. A built-in shelf on each unit is handy for storing supplies 

and components. Brackets are included with each outfit for wall 

mounting if desired. 

PFT200A/PFT100A LEADING 

PARTICULARS: 

• Cabinet Finish: Vinyl-clad, platinum 

(gray) and epoxy-painted, black 

• Cabinet Material: Aluminum alloy 

• Storage Compartment for standard 

card storage 

• Brackets for optional wall mounting 

PFT200A/PFT100A CONTENTS: 

1- FPT1C Super Cleaner Towelettes, 100 ea. 


Cardholder (PFT200A only) 


Cardholders (PFT100A only) 


(PFT200A, PFT100A) 

1- PFP700 PRINTMATIC Flawless Fingerprint 

Pad (PFT200APF, PFT100APF) 


Ceramic Fingerprint Pad (PFT200ACM, 

PFT100ACM) 

130 


PFT200APF PRINTMATIC Flawless Fingerprint Taking Outfit w/single cardholder $139.00 

PFT100APF PRINTMATIC Flawless Fingerprint Taking Outfit w/double cardholder $148.00 

PFT200ACM PRINTMATIC Ceramic Fingerprint Taking Outfit w/single cardholder $145.00 

PFT100ACM PRINTMATIC Ceramic Fingerprint Taking Outfit w/double cardholder $156.00 

PFT200A Regular Porelon ® Fingerprint Taking Outfit w/single cardholder $141.95 

PFT100A Regular Porelon ® Fingerprint Taking Outfit w/double cardholder $152.95 




Obtain 

fingerprints of 

exceptional 

quality! 

No. FPT274APIP 

No. FPT275APIP 

FPT274APIP/FPT275APIP 


• Cabinet Finish: Vinyl-clad, 

platinum (gray) and epoxypainted, 

black 

• Cabinet Material: Aluminum 

alloy 

• Storage Compartment for 

standard card storage 

• Brackets included for 

optional wall mounting 

FPT274APIP 



24.75" x 11.125" x 10.125" 

(62.9cm x 28.3cm x 25.7cm) 

• Net Wt.: 11.2 lbs. (5.1kg) 

FPT275APIP 



35" x 11.125" x 10.125" 

(88.9cm x 28.3cm x 25.7cm) 

• Net Wt.: 12.4 lbs. (5.6kg) 

FPT274APIP/FPT275APIP CONTENTS: 


Inking Slab 


Cardholder (FPT274APIP only) 


Cardholders (FPT275APIP only) 





SIRCHIE ® ’s PRINTMATIC Fingerprint Taking Outfits feature the revolutionary 

PRINTMATIC Pre-inked Porelon ® Ink Roller. Even a beginner may obtain fingerprints 

of exceptional quality using one of these outfits. That’s because it is 

possible to roll a thin and very even ink layer with the PRINTMATIC. In fact, it is 

almost impossible to over-ink a subject’s fingers or palms. The outfits are available 

with one or two cardholders and feature a storage compartment for supplies. 

Place either outfit on a desk or table 

to achieve regulation height for rolling 

and recording prints, or use the brackets 

included with each to mount to the wall. 

A rugged, hinged storage container protects 

the PRINTMATIC roller during periods 

of non-use. 


FPT274APIP PRINTMATIC Fingerprint Taking Outfit w/single cardholder $170.50 

FPT275APIP PRINTMATIC Fingerprint Taking Outfit w/double cardholder $180.50 


131

FINGERPRINTING STATIONS 


Stainless steel 

inking slab. 

No. FPT274A 

No. FPT275A 

Ink Slab and Roller Fingerprint Taking Outfits 

Place either of SIRCHIE ® ’s Ink Slab and Roller Fingerprint Taking Outfits on 

a desk or table to achieve regulation height for rolling and recording fingerprints. 

These outfits are available with one or two fingerprint cardholders, and 

feature a Stainless Steel Ink Slab, a 3" (7.6cm) Unified Fingerprint Ink Roller, and 

a 2 oz. (59ml) tube of SEARCH ® Fingerprint 

Ink. The densely-black fingerprint ink is easily 

rolled and dries quickly on paper—but 

will remain soft and usable on a slab for 

days. A roomy compartment on each 

unit is perfect for storing fingerprint taking 

supplies. Also includes 100 Slab & Roller 

Cleaner Towelettes and 100 Super Cleaner 

Towelettes. 

FPT274A/FPT275A CONTENTS: 

1- FPT258 4" x 10" (10.2cm x 25.4cm) Stainless 

Steel Inking Slab 


Cardholder (FPT274A only) 


Cardholders (FPT275A only) 

1- FPR300 Unified Fingerprint Ink Roller, 3" 

(7.6cm) 

1- 230T SEARCH ® Fingerprint Ink, 2 oz. (59ml) 

tube 


1- SRT1C Slab & Roller Cleaner Towelettes, 

100 ea. 

FPT274A/FPT275A 




black 


alloy 



• Brackets included for 

optional wall mounting 



24.75" x 11.125" x 9.1875" 

(62.9cm x 28.3cm x 23.3cm) 

• Net Wt.: 9.1 lbs. (4.1kg) 



35" x 11.125" x 9.1875" 

(88.9cm x 28.3cm x 23.3cm) 

• Net Wt.: 11.4 lbs. (5.2kg) 

132 


FPT274A Ink Slab and Roller Fingerprint Taking Outfit w/single cardholder $147.50 

FPT275A Ink Slab and Roller Fingerprint Taking Outfit w/double cardholder $158.50 



Portable Fingerprint Taking Outfits 

No. PFT500 folds to fit in 

its convenient carrying 

case. 

PFT500 SPECIFICATIONS: 

• Dimensions: 27.5" x 16.5" x 7" 

(69.8cm x 41.9cm x 17.8cm) 

• Net Wt.: 15.55 lbs. (7kg) 

PFT600 SPECIFICATIONS: 

• Dimensions: 27.5" x 16.5" x 7" 

(69.8cm x 41.9cm x 17.8cm) 

• Net Wt.: 16.1 lbs. (7.3kg) 

PFT600PIP SPECIFICATIONS: 

• Dimensions: 27.5" x 16.5" x 7" 

(69.8cm x 41.9cm x 17.8cm) 

• Net Wt.: 17.5 lbs. (7.9kg) 

PFT500 CONTENTS: 


Towelettes 

1- FPT263 Injection Molded 

Fingerprint Cardholder 

1- FPT265 Porelon ® Fingerprint 

Pad (PFT500A only) 


Fingerprint Pad (PFT500PF only) 


Ceramic Fingerprint 

Pad (PFT500CM only) 

1- PFT500C Black Molded, 

Copolymer Case, textured 

w/handle and molded inserts 

PFT600 CONTENTS: 


Towelettes 



1- 230T Fingerprint Ink, 2 oz. 

(59ml) tube 

1- SRT1C Slab & Roller Cleaner 

Towelettes, 100 ea. 

1- FPR300 Unified Fingerprint Ink 

Roller, 3" (7.6cm) 

1- FPT258 4" x 10" (10.2cm x 

25.4cm) Stainless Steel Inking 

Slab, mounted 

1- PFT600C Black Molded, 



PFT600PIP CONTENTS: 


Towelettes 



1- PIP100 PRINTMATIC Porelon ® 

Fingerprint Ink Roller System 

1- FPT205 4" x 10" (10.2cm x 

25.4cm) Glass Inking Slab, 

mounted 

1- PFT600PIPC Black Molded, 



No. PFT500 Regular Porelon ® Portable Fingerprint Taking Outfit 

Choose the fingerprinting method that best 

suits your department's needs. 

No. PFT600PIP PRINTMATIC Ink Slab 

and Roller option. 

Portable Fingerprint Taking Outfits combine 

maximum portability and efficiency. These units 

feature collapsible legs, which, when opened 

and placed on a desk or table, achieve regulation 

height for rolling and recording fingerprints. 

The Portable Fingerprint Taking Outfits 

are available for different methods of fingerprinting. 

Choose a PRINTMATIC Fingerprint 

Pad (Regular 

Porelon ® , Flawless, 

or Impeccable 

Ceramic), an Ink Slab and Roller, or the 

PRINTMATIC Pre-inked Porelon ® Roller. Each unit 

features a mounted cardholder and molded 

copolymer carrying case. These outfits may 

be easily transported or stored. All outfits are 

supplied with ink cleaning supplies. 


PFT500PF PRINTMATIC Flawless Portable Fingerprint Taking Outfit $236.00 

PFT500CM PRINTMATIC Ceramic Portable Fingerprint Taking Outfit $243.00 

PFT500 Regular Porelon ® Portable Fingerprint Taking Outfit $239.95 

PFT600 Ink Slab and Roller Portable Fingerprint Taking Outfit $246.95 

PFT600PIP 

No. PFT600 Ink Slab and Roller 

portable outfit. 

Regular Porelon ® Ink Slab and Roller Portable Fingerprint 

Taking Outfit 

$268.95 


133


Pedestal PRINTMATIC Fingerprint Units 

No. FPT300P 

No. FPT200P 

Pedestal PRINTMATIC Fingerprint Units 

SIRCHIE ® ’s Pedestal PRINTMATIC Fingerprint Units offer the ultimate in appearance 

and serviceability. Available with one or two fingerprint cardholders, 

each outfit comes with a Regular Porelon ® 

Pad or our series of PRINTMATIC Fingerprint 

Pads. A built-in shelf on each unit is handy 

for storing supplies and components. 

Sturdy and free-standing, these units are 

versatile because they are not limited to 

available table or wall space. 

FPT200P/FPT300P CONTENTS: 



Cardholder (FPT200 only) 


Cardholders (FPT300 only) 


(FPT200P, FPT300P) 


Pad (FPT200PPF, FPT300PPF) 


Ceramic Fingerprint Pad (FPT200PCM, 

FPT300PCM) 

FPT200P/FPT300P LEADING 

PARTICULARS: 



black 


alloy 

• Pedestal: Epoxy-painted 

steel, black-wrinkle finish 



FPT200P SPECIFICATIONS: 


24.75" x 11.125" x 39.5" 

(62.9cm x 28.3cm x 100.3cm) 

• Net Wt.: 27.6 lbs. (12.5kg) 

FPT300P SPECIFICATIONS: 


35" x 11.125" x 39.5" 

(88.9cm x 28.3cm x 100.3cm) 

• Net Wt.: 28.9 lbs. (13.1kg) 

134 


FPT200PPF PRINTMATIC Flawless Fingerprint Unit w/single cardholder $249.00 

FPT300PPF PRINTMATIC Flawless Fingerprint Unit w/double cardholder $259.00 

FPT200PCM PRINTMATIC Ceramic Fingerprint Unit w/single cardholder $258.00 

FPT300PCM PRINTMATIC Ceramic Fingerprint Unit w/double cardholder $268.00 

FPT200P Regular Porelon ® Fingerprint Unit w/single cardholder $253.95 

FPT300P Regular Porelon ® Fingerprint Unit w/double cardholder $263.00 



Pedestal Ink Slab and Roller Fingerprint Units 

Sturdy, freestanding, and built at 

regulation height. 

No. FPT400S 


• Cabinet Finish: Vinyl-clad, platinum 

(gray) and epoxy-painted, black 

• Cabinet Material: Aluminum alloy 

• Pedestal: Epoxy-painted steel, blackwrinkle 

finish 

• Storage Compartment for standard 

card storage 

FPT400S SPECIFICATIONS: 

• Dimensions: 24.75" x 11.125" x 39.5" 

(62.9cm x 28.3cm x 100.3cm) 

• Net Wt.: 27.6 lbs. (12.5kg) 

FPT500S SPECIFICATIONS: 

• Dimensions: 35" x 11.125" x 39.5" 

(88.9cm x 28.3cm x 100.3cm) 

• Net Wt.: 29 lbs. (13.1kg) 

FPT400SPIP SPECIFICATIONS: 

• Dimensions: 24.75" x 11.125" x 40.5" 

(62.9cm x 28.3cm x 102.9cm) 

• Net Wt.: 28.8 lbs. (13.1kg) 

FPT500SPIP SPECIFICATIONS: 

• Dimensions: 35" x 11.125" x 40.5" 

(88.9cm x 28.3cm x 102.9cm) 

• Net Wt.: 30 lbs. (13.6kg) 

No. FPT400SPIP 

FPT400S/FPT500S CONTENTS: 


1- FPT263 Injection Molded Fingerprint Cardholder 

(FPT400S only) 

2- FPT263 Injection Molded Fingerprint Cardholders 

(FPT500S only) 

1- 230T Fingerprint Ink, 2 oz. (59ml) tube 


100 ea. 


(7.6cm) 


Steel Inking Slab, mounted 

SIRCHIE ® ’s Pedestal Ink Slab 

and Roller Fingerprint Units are 

available with one or two fingerprint 

cardholders and come in 

your choice of two inking slab options. 

The Ink Slab and Roller option 

features a 4" x 10" (10.2cm x 

25.4cm) stainless steel inking slab 

and the PRINTMATIC Pre-inked 

Porelon ® option uses a 4" x 10" 

(10.2cm x 25.4cm) glass inking 

slab. A built-in shelf on each unit 

is handy for storing supplies and 

components. Sturdy and freestanding, 

these units are built at 

regulation height for rolling and 

recording fingerprints. 

FPT400SPIP/FPT500SPIP CONTENTS: 


1- FPT263 Injection Molded Fingerprint Cardholder 

(FPT400SPIP only) 

2- FPT263 Injection Molded Fingerprint Cardholders 

(FPT500SPIP only) 

1- PIP100 PRINTMATIC Porelon ® Fingerprint Ink 

Roller System 


Inking Slab, mounted 


FPT400S Ink Slab and Roller Fingerprint Unit w/single cardholder $260.75 

FPT500S Ink Slab and Roller Fingerprint Unit w/double cardholder $271.95 

FPT400SPIP PRINTMATIC Porelon ® Ink Slab and Roller Fingerprint Unit w/single cardholder $282.75 

FPT500SPIP PRINTMATIC Porelon ® Ink Slab and Roller Fingerprint Unit w/double cardholder $293.95 


135


Supplemental Fingerprinting Techniques for… 

Recording Palm Prints 

Protective 

Housing 

Cover 

Porelon ® 

Palm Roller 

STEP 1: The subject's palm is inked using 

the Porelon ® Palm Roller of the AP100. 

Image 

Transfer Roller 

No. AP200 Components 

About Supplemental Fingerprints 

Supplemental fingerprints are commonly referred to as palm prints. 

Like fingerprints, palm prints can provide the investigator with a means 

of positive identification. Palm prints are sometimes the only form of 

latent print evidence found at a crime scene. And they’re particularly 

common in burglary cases, because the perpetrator often places his 

palms on window sills, casements or on the top of furniture while forcing 

entry as well as during the crime itself. 

STEP 2: The subject's palm print is transferred 

to the record card by rolling both 

on the Image Transfer Roller. 

Use of Palm Prints 

Often, the investigator must rely on palm prints—full or partial—for 

positive identification due to insufficient latent fingerprint evidence. 

Palm prints are developed, photographed and lifted in the same 

manner as fingerprints. Like fingerprints, identification of palm prints is 

based on comparison of friction ridges and flexure lines. The investigator 

compares the latent palm prints and the suspect’s palm prints 

in the same manner as fingerprints. A latent palm print, whether full or 

partial, offers a great number of minutiae 

points with which the investigator 

may compare for positive 

identification. 

136 

STEP 3: The resultant Right Palm Print Record 

is complete. 


PRINTING OUTFITS 

Autopalm ® Print Outfits 

No. AP100 

No. AP200 

AP200 LEADING PARTICULARS: 

• Image Transfer Roller: Soft foam 

• Palm Roller: Ink-impregnated 

Porelon ® 

• Carrying Case: Molded Copolymer 

with Latch 

AP100 LEADING PARTICULARS: 


• Palm Roller: Ink-impregnated 

Porelon ® 

• Construction: Aluminum alloy and 

particle board 

• Finished: Vinyl-clad, platinum (gray) 

and Formica ® 

AP200 SPECIFICATIONS: 

• Case Dimensions: 16.5" x 8.5" x 7.5" 

(41.9cm x 21.6cm x 19.1cm) 

• Net Wt.: 6.5 lbs. (2.9kg) 

AP100 SPECIFICATIONS: 

• Dimensions: 26.5" x 12.375" x 9.875" 

(67.3cm x 31.4cm x 25.1cm) 

• Net Wt.: 17.8 lbs. (8.1kg) 

AP200 CONTENTS: 

1- AP2003 Porelon ® Palm Roller 


1- AP200CH Palm Roller Recording Mount 

1- AP200PH Palm Roller Inking Mount with 

Cover 

8- SFL288 Rubber Feet, adhesive mount 

1- AP200C Carrying Case 

AP100 CONTENTS: 



1- 236T16 Spray Magic Hand Cleaner, 

16 oz. (473ml) aerosol 


AP200 Autopalm ® Printer 

The AP200 Autopalm ® Printer is lightweight and portable, making 

it ideal for field use. This kit provides the necessary equipment to roll 

and record palm prints accurately and quickly. The AP200 utilizes a 

Porelon ® Palm Roller that applies a thin, even layer of ink along the 

contour of the entire palm in one simple motion. A clear impression 

of the palm, from fingerprints to the wrist, is then recorded on a palm 

print record card by rolling both over the image transfer roller. The 

AP200 also may be used for postmortem cases. A sturdy, molded 

plastic carrying case is provided with each unit. 

AP100 Autopalm ® Print Outfit 

The Autopalm ® Print Outfit features all the necessary tools for rolling 

and recording clear and readable palm prints. This unit is selfcontained 

and designed for portable, desktop use. No external ink 

supply is needed. The Autopalm ® ’s Porelon ® Palm Roller is designed 

and precisely positioned on each unit to ink the entire palm with just 

the right amount of ink. And the unit’s soft-foam Image Transfer Roller 

provides the proper surface for recording the print on the palm print 

record card. The ink roller is impregnated with a two-year supply of ink 

and is protected by a steel cover when not in use. 


AP200 Autopalm ® Printer $140.50 

AP100 Autopalm ® Print Outfit $307.95 

AP2003 Replacement Porelon ® Palm Roller for AP200 $44.95 

AP1001 Replacement Porelon ® Palm Roller for AP100 $82.95 


PRINTING STATIONS 

Fingerprint-Autopalm ® Desktop Combinations 

Portable Desktop 

Combination 

No. APC200 

Fingerprint- 

Autopalm ® Stations 

The APC200 Station provides all the necessary tools for recording 

both fingerprints and palm prints. The APC200 station features a sliding 

top that allows the operator to roll and record fingerprints when 

the top is slid forward and locked. When the top is unlocked and 

pushed to the rear, the operator has access to the palm printing supplies. 

The APC200 is available with any of our series of PRINTMATIC fingerprint 

pads. It is also supplied with a Porelon ® palm roller and image 

transfer roller for recording palm prints. 


• Cabinet Finishes: Vinyl-clad, platinum 

(gray) and Formica ® 

• Cabinet Materials: Aluminum alloy 

and Formica ® -covered hardboard 


• Palm Roller: Impregnated Porelon ® 

• Sliding Top locks into place for 

fingerprinting, slides away for palm 

printing 

APC200 SPECIFICATIONS: 


26.5" x 13.75" x 11.625" 

(67.3cm x 34.9cm x 29.5cm) 

• Net Wt.: 27.7 lbs. (12.6kg) 

APC300 SPECIFICATIONS: 


26.5" x 13.75" x 11.625" 

(67.3cm x 34.9cm x 29.5cm) 

• Net Wt.: 27.9 lbs. (12.6kg) 

APC300PIP 



26.5" x 13.75" x 12.5" 

(67.3cm x 34.9cm x 31.8cm) 

• Net Wt.: 29.7 lbs. (13.5kg) 

138 


APC200PF PRINTMATIC Flawless Station $416.95 

APC200CM PRINTMATIC Ceramic Station $426.95 

APC200 Regular Porelon ® Station $422.95 

Portable Desktop 

Combination 

No. APC300PIP 

Fingerprint- 

Autopalm ® Stations 

These stations provide the necessary tools for recording both fingerprints 

and palm prints. Designed for portability, these stations are 

very durable and built to provide years of dependable service. Each 

unit features a unique sliding top that enables the operator to roll and 

record fingerprints when the top is slid forward and locked. When the 

top is unlocked and pushed to the rear, the operator has access to the 

palm printing supplies. The APC300PIP is available with a PRINTMATIC 

pre-inked Porelon ® roller. Each unit is supplied with a Porelon ® palm 

roller and image transfer roller for recording palm prints. 


APC300 Ink Slab and Roller Station $432.95 

APC300PIP Regular Porelon ® Ink Slab and Roller Station $463.95 

APC200 CONTENTS: 




1- FPT265 Porelon ® Fingerprint Pad (APC200 

only) 


Pad (APC200PF only) 

1- EZID300 PRINTMATIC Impeccable Ceramic 

Fingerprint Pad (APC200CM only) 


Cardholder 



APC300 CONTENTS: 





Cardholder 



100 ea. 


(7.6cm) 





APC300PIP CONTENTS: 





Cardholder 








PRINTING STATIONS 

Combination Fingerprint-Autopalm ® Print Stations 


• Cabinet Finishes: Vinyl-clad, platinum 

(gray) 

• Cabinet Materials: Aluminum alloy 

and laminated hardboard 

• Pedestal: Epoxy-painted steel, 

black-wrinkle finish 


• Palm Roller: Impregnated Porelon ® 

• Sliding Top locks into place for 

fingerprinting, slides away for palm 

printing 

CFPS100 SPECIFICATIONS: 


26.5" x 13.75" x 42.625" 

(67.3cm x 34.9cm x 108.3cm) 

• Net Wt.: 27.7 lbs. (12.6kg) 

CFPS200 SPECIFICATIONS: 


26.5" x 13.75" x 42.625" 

(67.3cm x 34.9cm x 108.3cm) 

• Net Wt.: 29 lbs. (13.1kg) 

CFPS200PIP SPECIFICATIONS: 


26.5" x 13.75" x 43.625" 

(67.3cm x 34.9cm x 110.8cm) 

• Net Wt.: 30.8 lbs. (14kg) 

No. CFPS200PIP 

No. CFPS100 

CFPS100 CONTENTS: 




1- FPT265 Porelon ® Fingerprint Pad (CFPS100 

only) 


Pad (CFPS100PF only) 

1- EZID300 PRINTMATIC Impeccable Ceramic 

Fingerprint Pad (CFPS100CM only) 


Cardholder 



CFPS200 CONTENTS: 





Cardholder 



100 ea. 


(7.6cm) 





CFPS200PIP CONTENTS: 





Cardholder 







Combination 

Fingerprint- Autopalm ® 

Print Stations 

These freestanding palm 

and fingerprint stations are 

built at regulation height for 

rolling and recording both fingerprints and palm prints. They feature a 

sliding top which, when slid forward and locked, allows the operator 

to roll and record fingerprints. When the top is unlocked and pushed 

to the rear, the operator has access to the Autopalm ® printing supplies. 

These stations are available for different methods of fingerprinting: 

PRINTMATIC Fingerprint Pad (Regular Porelon ® , Flawless, or Impeccable 

Ceramic), an Ink Slab and Roller, or the PRINTMATIC Pre-inked 

Porelon ® Roller. Each is equipped with a Porelon ® palm roller and image 

transfer roller. A storage area is provided behind the palm card 

roller for keeping record cards as well and other supplies. 

CAT. NO. PRINT STATIONS PRICE 

CFPS100PF PRINTMATIC Flawless $436.95 

CFPS100CM PRINTMATIC Ceramic $446.95 

CFPS100 Regular Porelon ® $499.95 

CFPS200 Ink Slab and Roller $476.95 

CFPS200PIP Regular Porelon ® Ink Slab and Roller $498.95 


139


Compact Folding Fingerprint Taking Kits 

No. CFP500A Kit and Components 

These Compact 

Folding Kits close up for 

convenient transportation. 

CFP500A/CFP600A/CFP600APIP 


• Dimensions (all): 15.5" x 13.25" x 6.25" 

(39.4cm x 33.7cm x 15.9cm) 

• CFP500A Net Wt.: 6.7 lbs. (3kg) 

• CFP600A Net Wt.: 7.3 lbs. (3.3kg) 

• CFP600APIP Net Wt.: 7.8 lbs. (3.5kg) 

140 


CFP500APF PRINTMATIC Flawless Compact Print Kit $114.00 

CFP500ACM PRINTMATIC Ceramic Compact Print Kit $124.00 

CFP500A Regular Porelon ® Compact Print Kit $119.50 

CFP600A Ink Slab and Roller Compact Print Kit $123.95 

CFP600APIP 


Compact Folding Fingerprint Taking Kits 

These portable kits are among the most popular of their kind. When 

opened, these kits convert any desk or tabletop into efficient fingerprint 

taking stations. The Compact Print Kits are available for different 

methods of fingerprinting. Choose a PRINTMATIC Fingerprint Pad 

(Regular Porelon ® , Flawless, or Ceramic), an Ink Slab and Roller, or the 

PRINTMATIC Pre-inked Porelon ® Roller. Each kit features a mounted injection 

molded fingerprint cardholder. These compact kits are ideal 

choices whenever maximum portability is required. All kits are provided 

with ink cleaning supplies. 

Regular Porelon ® Ink Slab and Roller 

Compact Print Kit 

$145.95 

CFP500A CONTENTS: 



(CFP500A only) 


Pad (CFP500APF only) 


Ceramic Fingerprint Pad (CFP500ACM 

only) 


Cardholder 

1- KCP152 Accessory Case, Polypropylene 

1- CFP500AC Custom Black Molded 

Copolymer Carrying Case, textured 

w/folding handle and locking latches; 

custom molded inserts 




Cardholder 


40- SRT1C1 Slab & Roller Cleaner Towelettes 

1- FPT262A Easy-Grip Fingerprint Roller, 3" 

(7.6cm) 




1- CFP600AC Custom Black Molded 




CFP600APIP CONTENTS: 

20- FPT1C Super Cleaner Towelettes 


Cardholder 







1- CFP600APIPC Custom Black Molded 





PRINTING/LIFTING KITS 

Compact Folding Taking and Lifting Kits 

CFP700A/CFP800A/CFP800APIP 


• Dimensions (all): 15.5" x 13.25" x 6.25" 

(39.4cm x 33.7cm x 15.9cm) 

• CFP700A Net Wt.: 6.7 lbs. (3kg) 

• CFP800A Net Wt.: 7.3 lbs. (3.3kg) 

• CFP800APIP Net Wt.: 7.8 lbs. (3.5kg) 




(CFP700A only) 


Pad (CFP700APF only) 


Ceramic Fingerprint Pad (CFP700ACM 

only) 


Cardholder 

1- 101L1 Hi-Fi Silk Black Volcano Latent 

Print Powder, 1 oz. (30ml) 

1- 103L1 Hi-Fi Indestructible White Volcano 

Latent Print Powder, 1 oz. (30ml) 

2- 118L Regular Powder Brush 

1- 145L2 Frosted Fingerprint Lifting Tape, 

2" x 360" (5.1cm x 9.1m) 

1- LB0021 Gloss Black Backing Card Pad 


1- CFP700AC Black Molded Copolymer 

Case w/custom molded inserts 




Cardholder 







2" x 360" (5.1cm x 9.1m) 




1- FPT262A Easy-Grip Fingerprint Roller, 3" 

(7.6cm) 




1- CFP800AC Black Molded Copolymer 


CFP800APIP CONTENTS: 

20- FPT1C Super Cleaner Towelettes 


Cardholder 







2" x 360" (5.1cm x 9.1m) 



1- PIP100H PRINTMATIC Horizontal Porelon ® 

Fingerprint Ink Roller System 




1- CFP800APIPC Black Molded Copolymer 



No. CFP800APIP Kit and 

Components 

Compact Folding Fingerprint Taking and Lifting Kits 

These portable kits are ideal for fingerprint taking and latent print 

dusting. The Compact Print Kits are available for different methods 

of fingerprinting: PRINTMATIC Fingerprint Pad (Regular Porelon ® , Flawless, 

or Ceramic), an Ink Slab and Roller, or the PRINTMATIC Pre-inked 

Porelon ® Roller. Each kit has a mounted injection molded fingerprint 

cardholder, and latent print dusting and lifting materials. 


CFP700APF PRINTMATIC Flawless Compact Print/Lift Kit $124.00 

CFP700ACM PRINTMATIC Ceramic Compact Print/Lift Kit $135.00 

CFP700A Regular Porelon ® Compact Print/Lift Kit $129.50 

CFP800A Ink Slab and Roller Compact Print/Lift Kit $143.95 

CFP800APIP 

Regular Porelon ® Ink Slab and Roller 

Compact Print/Lift Kit 

$163.50 


141


Field Fingerprint Taking Kits 

FPT100/FPT200 



14.5" x 7.8125" x 7" 

(36.8cm x 19.8cm x 17.8cm) 

• Net Wt.: 4.5 lbs. (2kg) 

FPT200PIP SPECIFICATIONS: 


14.5" x 7.8125" x 7" 

(36.8cm x 19.8cm x 17.8cm) 

• Net Wt.: 5.4 lbs. (2.4kg) 

No. FPT100 Kit and Components 


Field Fingerprint Taking Kits 

These compact kits are ideal for taking fingerprints in the field. The Field 

Fingerprint Taking Kits are available for different methods of fingerprinting: 

PRINTMATIC Fingerprint Pad (Regular Porelon ® , Flawless, or Ceramic), an Ink 

Slab and Roller, or the PRINTMATIC Pre-inked Porelon ® Roller. Each kit has a 

mounted injection molded fingerprint cardholder. 

FPT100 CONTENTS: 


Towelettes 




Pad (FPT100 only) 


Fingerprint Pad (FPT100PF only) 


Ceramic Fingerprint 

Pad (FPT100CM only) 

1- KCP152 Accessory Case, 

Polypropylene 

1- FPT1001 Molded Copolymer 

Case w/latch 



Towelettes 



1- 230T Fingerprint Ink, 2 oz. 

(59ml) tube 

1- SRT1C Slab & Roller Cleaner 

Towelettes, 100 ea. 

1- FPR200 Unified Fingerprint Ink 

Roller, 2" (5.1cm) 

1- FPT205 4" x 10" Glass Inking 

Slab (10.2cm x 25.4cm) 


Polypropylene 


Case w/latch 

FPT200PIP CONTENTS: 


Towelettes 



1- PIP100H PRINTMATIC Horizontal 

Porelon ® Fingerprint Ink Roller 

System 

1- FPT205 4" x 10" Glass Inking 

Slab (10.2cm x 25.4cm) 


Polypropylene 


Case w/latch 

142 


FPT100PF PRINTMATIC Flawless Field Fingerprint Kit $49.50 

FPT100CM PRINTMATIC Ceramic Field Fingerprint Kit $59.50 

FPT100 Regular Porelon ® Field Fingerprint Kit $55.50 

FPT200 Ink Slab and Roller Field Fingerprint Kit $60.95 

FPT200PIP Regular Porelon ® Ink Slab and Roller Field Fingerprint Kit $82.50 



Elimination Fingerprint Kits 

EFP90 LEADING 

PARTICULARS: 

• Simulated leather elimination 

pad notebook 

• Pocket-sized fingerprint ink 

pad 

EFP90 SPECIFICATIONS: 


10.375" x 4.625" x 1.75" 

(26.4cm x 11.7cm x 4.4cm) 

• Weight: 1 lb. (453.6g) 

EFP90 CONTENTS: 


Towelettes 

1- FPT270A Elimination Pad, 50 

sheet 


Pad (EFP90 only) 


Fingerprint Pad (EFP90PF only) 


Fingerprint Pad (EFP90CM 

only) 

1- FPT2701 Wallet-type Vinyl 

Case 

1- KCP224 Molded Polypropylene 

Carrying Case 

No. EFP90 Kit and Components 

Crime Scene Fingerprint Elimination Kits 

These kits contain all the supplies needed to eliminate the latent prints 

of those who have regular access to a crime scene from unknown latent 

prints. Elimination kits are available with a regular Porelon ® , PRINTMATIC Flawless 

or Ceramic fingerprint pad. 


EFP90PF PRINTMATIC Flawless Crime Scene Elimination Kit $42.00 

EFP90CM PRINTMATIC Ceramic Crime Scene Elimination Kit $51.00 

EFP90 Regular Porelon ® Crime Scene Elimination Kit $47.25 

Elimination Fingerprint Outfits 

These convenient pocket-sized kits are designed for differentiating between latent prints of those who 

have regular access to a crime scene and unknown latent prints. Record the subject’s fingerprints on the 



Pad (FPT270 only) 


Fingerprint Pad (FPT270PF 

only) 


Fingerprint Pad (FPT270CM 

only) 

1- FPT270A Elimination Pad, 50 

sheet 

1- FPT2701 Wallet-type Vinyl 

Case; 

Dimensions: 7.375" x 3.5" x 1" 

(18.7cm x 8.9cm x 2.5cm) 

front of the elimination form, and the date and other information on the back. 

Kits are available with a regular Porelon ® , 

PRINTMATIC Flawless or Ceramic pad. 



FPT270PF PRINTMATIC Flawless Elimination Outfit $25.75 

FPT270CM PRINTMATIC Ceramic Elimination Outfit $44.75 

FPT270 Regular Porelon ® Elimination Outfit $29.75 

FPT270A Replacement Elimination Pad only, 50 sheets $5.50 


143


SEARCH ® Fingerprint Prep & Cleaning Towelettes 

SEARCH ® Cleanum Prep Towelettes 

Every effort should be taken to ensure that the best fingerprint impressions are taken. The first step is to 

prepare the individual’s hands before taking impressions. These towelettes are formulated to condition 

the skin and ridges by eliminating excess moisture from the skin and by softening hard, callused and dry 

fingers. Hermetically sealed. 


FPT256 SEARCH ® Cleanum Prep Towelettes, 100 ea. $9.95 

FPT257 SEARCH ® Cleanum Prep Towelettes, 1000 ea. $45.95 

SEARCH ® Multi-Purpose Waterless Cleaner Towels 

Towelettes provide high-powered versatile cleaning ability for all your cleaning 

needs. Use them for almost every job from loosening and dissolving fingerprint 

ink to cleaning latent print powder from most surfaces. These aggressive, 

citrus scented towels are industrial strength but also 

gentle—fortified with an emollient and natural oils 

so they won’t crack or dry hands. 

Perfect for when you do not have access to soap 

and water—does not leave an annoying residue. 

MP70 LEADING 

PARTICULARS: 

• Cleans fingerprint ink slabs 

and rollers 

• Cleans latent print powders 

from furniture or other surfaces 

at the crime scene 

• Removes fingerprint ink 

and stains from fingers and 

hands 

144 


MP70 Multi-Purpose Waterless Cleaner Towels, 10" x 12" 

(25.4cm x 30.5cm), 70 ea. 

$24.95 



Fingerprint Ink Cleaners 

SEARCH ® Super Cleaner Towelettes 

Towelettes are individual, disposable ink cleaning towels. They’re 

napkin-size, of wet strength and saturated with ink solvent that is 

easy on skin and mildly fragrant. They will quickly remove fingerprint 

ink or grime from hands and are excellent for field kits or office use. 

These towelettes are not the same as those sold in retail stores which 

contain a mild detergent. No. FPT1C features SIRCHIE ® ’s special 

formulation. Plus, 

they’re sanitary 

and available in 

hermeticallysealed 

packages. 


FPT1C Super Cleaner Towelettes, 100 ea. $12.95 

FPT1M Super Cleaner Towelettes, 1000 ea. $119.95 

Sirch Kleen Finger Print Ink Remover Pads 

These finger print ink remover pads are individually pre-moistened 

pads that will quickly and easily remove fingerprint 

ink. Sirch Kleen Pads are sanitary, disposable and 

leave the hands clean and fresh with a gentle skin 

conditioner. The pads may also be used to clean 

ink slabs when necessary. They are packaged one 

hundred pads to a container with a resealable 

screw top lid. 

No. FPT900A 


FPT900A Sirch Kleen Finger Print Ink Remover Pads, 100 ea. $12.95 

Waterless Magic Cleaner 

Waterless Magic Cleaner removes 

fingerprint ink and stains 

from fingers and hands —no 

need to add water. It is 

very useful for cleaning 

fingerprint powders from 

furniture and other items 

at the crime scene. Contains 

aloe and lanolin. 

Nos. FPT249 and FPT249AG 

CAT. NO. WATERLESS MAGIC CLEANER PRICE 

FPT249 16 fl. oz. (473ml) $5.75 

FPT249AG 128 fl. oz. (3.78L) $30.25 

SEARCH ® Magic Skin Cleaner 

A very effective, non-fluorocarbon, 

waterless hand cleaner that 

is excellent for cleaning fingerprint 

ink from hands, especially after 

palm printing. This hand cleaner 

will also remove grease, oil and 

other soil. After application, wipe 

off with a cloth or paper towel. 


236T16 

Magic Skin 

Cleaner, 16 oz. 

(473ml) aerosol 

$11.25 


145



Magic Orange Waterless Ink Cleaner 

SIRCHIE ® ’s Magic Orange Waterless Ink Cleaner is now available 

with or without pumice. The cleaner removes gun oils, powdered inks, 

glue, tar, adhesives, mechanic’s grease and of course, fingerprint ink. 

Magic Orange is sold in a 500ml squeeze bottle that is ideal for the fingerprint 

station. No. MB248PS is perfect for cleaning the slab and rollers 

since it contains no abrasive pumice that could damage surfaces. 


MB248PT Magic Orange w/pumice, 16 fl. oz. (473ml) $5.50 

MB248PS Magic Orange w/out pumice, 16 fl. oz. (473ml) $5.50 

Waterless Ink Cleaner 

Waterless ink cleaner 

has a pleasant citrus 

scent and contains aloe, 

lanolin and jojoba. Available 

in a 1 gal. (3.78L) selfdispensing 

container with 

or without pumice—does 

not contain any petroleum 

solvents. Net Wt.: 8.4 

lbs. (3.8kg). 

No. FPT248GP 

No. FPT252 

No. MB248PT 

No. MB248PS 

SEARCH-O-LINE Fingerprint 

Ink Cleaner 

This cleaner is specifically formulated 

and manufactured for cleaning 

fingerprint ink from ink slabs, rollers 

and hands. This non-flammable 

cleaner is pleasant smelling and 

contains a germicidal agent that is 

advantageous for use by the technician 

as well as the subject being 

fingerprinted. 


FPT248GP 

FPT248GS 


w/pumice, 1 gal. (3.78L) 


w/out pumice, 1 gal. (3.78L) 

$26.25 

$26.25 


FPT252 

FPT253 

SEARCH-O-LINE Cleaner, 

32 fl. oz. (946ml) 

SEARCH-O-LINE Cleaner, 

128 fl. oz. (3.78L) 

$9.95 

$21.95 

Quick-Kleen Slab & Roller Cleaner 

The Quick-Kleen Slab & Roller Cleaner is an instant-cleaning 

solvent that immediately “bites” into excess fingerprint ink 

when cleaning ink rollers and slabs. It is ideal for quick and efficient 

cleanup—simply moisten a cloth or paper towel and wipe 

clean. 

146 


FPT250 Quick-Kleen Cleaner, 32 fl. oz. (946ml) $10.95 

FPT251 

Nos. FPT251 and FPT250 

Quick-Kleen Cleaner, 128 fl. oz. (3.78L) $27.50 




Slab & Roller Cleaner Towelettes 

SIRCHIE ® ’s Slab & Roller Cleaner Towelettes are 

specially formulated for cleaning ink slabs. It only 

takes one of these napkin-sized towelettes to clean 

the entire slab. Plus, they’re individually packaged 

for your convenience. 

No. SRT1C Slab & Roller Cleaner Towelettes make for a fast and 

easy clean-up. 


SRT1C Slab & Roller Cleaner Towelettes, 100 ea. $14.95 

SRT1M Slab & Roller Cleaner Towelettes, 1000 ea. $129.95 

SEARCH ® Spray Clean 

This slab and roller cleaner is a fast-acting solvent used for 

removing fingerprint ink stains from rollers and ink slabs. It is 

conveniently packaged in an easy-to- use, non-fluorocarbon 

aerosol can. Simply spray on and wipe away the ink with a paper 

towel or cloth. 


233T SEARCH ® Spray Clean, 6 oz. aerosol (177ml) $9.00 

234T SEARCH ® Spray Clean, 16 oz. aerosol (473ml) $11.25 

Disposable Slab and Roller Ink Removing Towels 

Take the mess out of slab and roller fingerprinting with these 

large, disposable ink removing towels. Towels are pre-conditioned 

with ink removing solvent. One towel will clean a 6" x 14" 

(15.2cm x 35.6cm) 

inked slab. Packaged 

in quantities 

of 50. Net Wt.: 3.2 

lbs. (1.5kg). 


DT999 

No. DT999 

Disposable Slab and Roller Ink Removing 

Towels, 50 ea. 

$21.95 

No. 234T 

No. 233T 


147


Fingerprinting without Black Ink… 

KlearInk Systems 

by SIRCHIE ® 

“So Easy! No Mess! 

No Fuss!” 

Press fingers on ceramic 

pad. 

Press down on 

KlearInk 

card. 

NO MESS on fingers, ever! 

No. KIFP300 

Experience fingerprinting without the black ink! 

The KlearInk Fingerprinting System is clean and 

user-friendly without the cleanup. 

The secret to the evolutionary idea is in the pad. KlearInk Ceramic Fingerprint 

Taking Pads are made of a micro-pore, space-age ceramic which allows 

the clear ink to rise to the surface through capillary action. A reservoir of ink 

underneath the pad allows for re-inking of the ceramic pad each time fingerprints 

are taken. Simply touch finger(s) evenly on the pad surface. There is no 

need for excessive pressure. Then, press down on a KlearInk Record Card or 

Label and fingerprints will begin to develop within seconds. These now visible 

prints dry on contact, too! 

Common Applications for KlearInk Systems: 

The KlearInk System can be used in many applications from fingerprinting 

criminals to protecting our children with Child Fingerprinting Kits. Some of the 

most common applications include: 

• Banks, Retailers, Grocery Stores or other Check Cashing Agencies 

• Hospitals (baby foot printing, medical records) 

• Child Identification Programs 

• Applications (employment, handgun, etc.) 

• Chain of Custody and Criminal Records 

• Agencies dealing with any type of documents 

KlearInk Pads require KlearInk 

coated media such as FC330KI. 

HOW IT WORKS: 

An individual places a 

finger(s) on a ceramic 

pad (containing 

KlearInk Solution) 

with light pressure, 

and then touches 

or rolls their finger(s) 

on specially coated 

KlearInk record 

cards or labels. 

KlearInk can 

be used in many 

applications from 

fingerprinting children 

to fingerprinting 

criminals. 

148 


KIFP300 KlearInk Pad, 2.875" x 5.5" x 1" (7.3cm x 14cm x 2.5cm) $29.95 



KlearInk Fingerprinting Systems 

KlearInk Ceramic 


These KlearInk Fingerprint 

Pads are clean 

and user-friendly without 

the cleanup associated with the traditional black ink 

pads. A reservoir of ink underneath the micro-pore 

pad allows for re-inking of the ceramic pad each 

time fingerprints are taken. Simply touch finger(s) 

evenly on the pad surface, excessive pressure is not 

necessary. (KlearInk Pads 

require coated 

KlearInk Record 

Cards 

and 

Labels.) 

No. KIFP100 

A simple touch of the finger reinks 

the KIFP100 pad. 

No. KIFP200 

CAT. NO. KlearInk FINGERPRINT PADS PRICE 

KIFP100 1.625" (4.1cm) dia. $8.95 

KIFP200 2" (5.1cm) dia. $10.95 

No. KIFP270 

KlearInk Elimination Fingerprint Outfit 

This kit is designed for differentiating between latent 

prints of those who have regular access to a 

crime scene and unknown latent prints. This outfit 

utilizes the KIFP200 KlearInk Fingerprint Pad and 

one 50 sheet pad of KlearInk elimination fingerprint 

forms. The KlearInk Fingerprint Outfit is constructed 

of black vinyl-finished aluminum and features 

a cover attached at each end by magnets. 

Simply remove cover at thumb notches. 


KIFP270 KlearInk Elimination Outfit $48.50 

KIFP270A 

Replacement KlearInk 

Elimination Pad, 50 sheets 

$7.95 

No. KIFP269A 

KlearInk Fingerprint Taking Combination 

The KlearInk Fingerprint Taking Combination features SIRCHIE ® ’s 

KIFP300 KlearInk Fingerprint Pad and two injection molded fingerprint 

cardholders. One of the cardholders is mounted on the left side and the 

other on the right side with the KlearInk fingerprint pad mounted in the 

center. This arrangement allows the operator to work from either side of 

the pad. The base is constructed of platinum vinyl-finished aluminum 

with pre-punched holes for mounting. 

KIFP269A LEADING PARTICULARS: 

• Cardholder/Pad Mount: Vinyl-clad 

aluminum, platinum (gray) 

• Pre-punched brackets for permanent 

mounting 

• KlearInk Ceramic Fingerprint Pad 

KIFP269A SPECIFICATIONS 

• Dimensions: 39.25" x 4.4375" x 1.5625" 

(99.7cm x 11.3cm x 4cm) 



KIFP269A KlearInk Fingerprint Taking Combination $84.95 


FINGERPRINT CARDS & TABS 

KlearInk Fingerprinting Media 

No. FC330KI (front and back view) 

KlearInk Record Cards 

KlearInk Record Cards are available 

in a standard 8" x 8" (20.3cm x 20.3cm) 

format. They are made from a specially 

coated 105 lb. index card stock with 

a smooth finish and fast ink absorption. 

They won’t wrinkle or crease when 

placed in a typewriter. All KlearInk Record 

Cards are printed with non-fading 

ink and have been specifically designed 

to meet intended needs. Sufficient 

space is provided on all KlearInk Record 

Cards for pertinent information. The 

special coating on these record cards 

only responds to SIRCHIE ® ’s KlearInk 

Fingerprint Pads. Contact us for custom 

printed forms and cards. 




APPLICANT RECORD CARDS (not shown) 

8" x 8" (20.3cm x 20.3cm) 

FD258KI 100 ea. $24.95 

FD2585KI 500 ea. $66.78 

FD258MKI 1000 ea. $107.24 

CRIMINAL RECORD CARDS 

8" x 8" (20.3cm x 20.3cm) 

FC330KI 100 ea. $24.95 

FC330MKI 500 ea. $107.24 

PERSONAL RECORD CARDS 

8" x 8" (20.3cm x 20.3cm) 

FC334KI 100 ea. $24.95 

FC334MKI 500 ea. $107.24 

CHILD FINGERPRINT CARDS 

8" x 8" (20.3cm x 20.3cm) 

FC335KI 100 ea. $24.95 

FC335MKI 500 ea. $107.24 

No. KIFP100T 

KlearInk Fingerprint Tabs 

These tabs are specially coated to work with other KlearInk products. 

They are available in pads of 200 and rolls of 100 or 500 tabs. 

KlearInk Fingerprint Tabs are precut to 1.375" x 1.5" (3.5cm x 3.8cm) 

and have a permanent adhesive backing. 

150 

No. 

KIFP500T 

No. KIFP150T 


KIFP100T KlearInk Fingerprint Tabs, roll of 100 $9.50 

KIFP500T KlearInk Fingerprint Tabs, roll of 500 $17.00 

KIFP150T KlearInk Fingerprint Tab Pad, 200 ea. $10.95 


Taking advantage 

of every opportunity 

to protect children 

should be everyone's 

goal. Fingerprinting is 

certainly one of the 

best tools available 

since fingerprint ridge 

detail is permanent 

throughout life. 

Whether the intent is 

for record keeping 

only or to help find 

a missing child, our 

child fingerprinting 

kits provide the best 

tools available for 

fingerprinting. 

CFP100 CONTENTS: 

100- FC335KI KlearInk Child 

Fingerprint Cards, 8" x 8" 

(20.3cm x 20.3cm) 

40- FPT2561 SEARCH ® 

Cleanum Prep 

Towelettes 

1- KIFP200 KlearInk Fingerprint 

Pad, 2" (5.1cm) dia. 

1- CFP100C Black Copolymer 

Carrying Case; 

Dimensions: 

12.5" x 10.25" x 1.25; 

(31.8cm x 26cm x 3.2cm) 

Weight: 2.6 lbs. (1.2kg) 


No. CFP100 Kit and Components 

Child Fingerprinting Kits 

No. KIFP200 

(open/closed view) 

SEARCH ® Child KlearInk Fingerprinting Kit 

The Child KlearInk Fingerprinting System is clean and user-friendly without 

the cleanup. The system works when an child's finger(s) is placed on the ceramic 

pad (containing KlearInk solution) with light pressure and then touch 

or roll their finger(s) on specially coated KlearInk Record Cards or labels. 


CFP100 SEARCH ® Child KlearInk Kit $29.95 

No. PFP602 

(open/closed view) 

The CFP200 has a folding 

case for easy transportation. 

CFP200 CONTENTS: 

100- FC335 Child Fingerprint 

Cards, 8" x 8" (20.3cm x 

20.3cm) 

40- FPT2561 SEARCH ® 

Cleanum Prep 

Towelettes 

1- PFP602 PRINTMATIC Thermoplastic 

Fingerprint Pad, 

2" (5.1cm) dia. 

1- CFP100C Black Copolymer 

Carrying Case; 

Dimensions: 

12.5" x 10.25" x 1.25; 

(31.8cm x 26cm x 3.2cm) 

Weight: 2.6 lbs. (1.2kg) 

No. CFP200 Kit and Components 

SEARCH ® Child Stainfree Fingerprinting Kit 

The PRINTMATIC Thermoplastic Fingerprint Pad is an integral part of this kit. 

The ink pad system works by drawing ink to the surface by capillary action. It 

consists of a stainfree, high-contrast, instant-drying, permanent ink. It does not 

contain any water or alcohol that will dry out the pad. Rub fingers together to 

remove ink residue or use a dry paper towel as needed. 


CFP200 SEARCH ® Child Stainfree Kit $19.95 


151

POSTMORTEM PRODUCTS 

Postmortem Fingerprint Inking Tools 

PRINTMATIC Postmortem Ink Roller System 

This version of our PRINTMATIC pre-inked roller is designed specifically 

for recording fingerprints of the deceased. Ink is rolled directly 

onto the finger bulbs which 

are then immediately applied to 

a postmortem record card. The rolling 

action helps avoid ink smearing. A 

thermoset plastic handle ensures operator 

control. The Postmortem Ink Roller is 

supplied in a metal housing to protect the 

roller surface from dust and other environmental 

contaminants. 

No. PIP283PIP in use. 


PM283PIP PRINTMATIC Postmortem Roller System $25.50 

PM283PIPR Replacement Roller $18.75 

When not in use, 

the PM283PIP can 

rest inside its 

protective 

cover. 

PRINTMATIC Postmortem Horizontal Ink Roller System 

This roller is intended primarily for recording fingerprints of the deceased, although, it may be used for 

many other field fingerprinting situations. The rolling action minimizes potential ink smearing and over- 

inking of the fingers. Ink is always ready. The 

PM283PIPH is supplied with a protective tubular 

housing to prevent environmental tamination. 

con- 

No. PM283PIPH in use. 

No. PM283PIPH 

with protective housing. 


PM283PIPH PRINTMATIC Postmortem Horizontal Roller System $27.50 

PM283PIPR Replacement Roller $18.75 

No. PM283 in use. 

Postmortem Inking Tool 

Designed specifically for taking fingerprints 

of the deceased, this finger-sized, pre-inked 

pad greatly simplifies the task of inking 

immobilized fingers. Permits rapid, efficient 

and uniform inking. A rugged, 

nickeloid case assures years of service. 

Dimensions: 6" x 1.8125" x .5" (15.2cm x 

4.6cm x 1.3cm); Weight: 2.8 oz. (80g). 

No. PM283 with 

protective cover. 

152 


PM283 Regular Porelon ® Postmortem Inking Tool $18.95 

PM283P Replacement Ink Pad $9.95 


No. PMNS60B 

in the loading 

position. 

No. PMNS60 


Postmortem Fingerprinting Tools 

Regular and Folding Postmortem 

Record Strip Holders 

Our Regular Postmortem Record Strip Holder 

(No. PMNS60) is designed for use with the No. 

FC345 or No. FC543 Postmortem Record Strips 

(see Page 123 for pricing of strips). The revolutionary-design 

of our 

Folding Postmortem 

Record Strip Holder 

allows for perfect 

impressions. The curvature 

of the No. 

PMNS60B allows for 

ease of operation 

and reduces the 

chance of smudges. 

No. PMNS60 in use. 

Refer to Page 123 for selection and pricing on Postmortem Record Strips (No. FC345L shown below) 


PMNS60 Postmortem Record Strip Holder $14.25 

PMNS60B Folding Postmortem Record Strip Holder $24.95 

No. PMFT01 Kit and Components 

Basic Postmortem Fingerprint Kit 

All the components needed for fingerprinting 

the deceased and infirm are contained in this kit. 

It includes a set of finger straighteners, a postmortem 

inking tool with Porelon ® pad, a postmortem 

record strip holder and a handy carrying case. 


PMFT01 Basic Postmortem Kit $43.50 


153


Postmortem Fingerprinting Products 

Deluxe Postmortem 

Fingerprint Kit 

This kit contains all the components 

needed for fingerprinting 

the deceased and infirm. It includes 

a set of finger straighteners, 

a postmortem inking 

tool with Porelon ® 

pad, a postmortem record 

strip holder and a 

handy carrying case. 

PMFT02 SPECIFICATIONS: 

• Dimensions: 8.5" x 5.5" x 3.1875" 

(21.6cm x 14cm x 8.1cm) 

• Weight: 1.65 lbs. (.7kg) 

PMFT02 CONTENTS: 

12- FC345L1 Left Hand Postmortem Record 

Strip 

12- FC345R1 Right Hand Postmortem Record 

Strip 


1- PM283 Postmortem Inking Tool 

1- PMFS500 Postmortem Finger Straighteners 

1- PMNS60 Postmortem Record Strip 

Holder 

1- PMFT02C Black Molded Copolymer 

Case, textured w/handle 

No. PMFT02 Kit and Components 


PMFT02 Regular Porelon ® Deluxe Postmortem Kit $54.50 

Cadaver Taking Kit 

Combination 

This Cadaver Fingerprint Taking 

Kit Combination contains the 

essential reagents and hardware 

for postmortem fingerprint treatment 

and restoration. The tissue 

builder solution is packaged in 

disposable vials for convenience. 

A postmortem inking tool, record 

strip holder, and record strips are 

included for recording prints after 

treatment. 

CTK100 SPECIFICATIONS: 

• Dimensions: 13.5" x 11" x 5.25" 

(34.3cm x 27.9cm x 13.3cm) 


CTK100 CONTENTS: 

12- FC345L1 Postmortem Record Strips, Left 

Hand, Standard 

12- FC345R1 Postmortem Record Strips, 

Right Hand, Standard 


4- KCP148 Syringe, 3 cc, Disposable 

15- KCP217 Cotton Balls 

8- KRL103D Tissue Builder Solution, 1/2 oz. 

(14g) 

2- KRL1052 Finger Tissue Cleaner, 2 oz. 

(56.7g) 

2- KRL1061 Tissue Builder Solvent, 1 oz. 

(28.3g) 

1- PM283 Postmortem Inking Tool 

1- PMNS60 Postmortem Record Strip 

Holder 

1- SF00771 Disposable Latex Gloves, pair 

1- CTK100C Black Molded Copolymer 

Case, textured w/handle and molded 

inserts 

No. CTK100 Kit and Components 


CTK100 Cadaver Taking Kit Combination $97.50 

154 

Postmortem Finger Straighteners 

Use these tools to straighten clenched fingers of the 

deceased. Each tool features two different-sized hole 

openings to accommodate the vast majority of finger 

sizes. Tools are made of zinc-plated steel and are 

supplied in a convenient carrying pouch. Weight: 6 oz. 

(170.1g) 


PMFS500 Postmortem Finger Straightener Kit $21.95 

PMFS500 LEADING PARTICULARS: 

• Hole Sizes: 7/16", 1/2"; 9/16", 5/8"; and 

11/16", 3/4" 

• Material: Bright zinc-plated steel

Finger Print Recording - ADON SYSTEM

Create successful ePaper yourself

Delete template?

Save as template?