instruction manual hm motor powered bending roller type rm
instruction manual hm motor powered bending roller type rm
instruction manual hm motor powered bending roller type rm
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation:<br />
SERVICE AND MAINTENANCE<br />
The machine must be placed on fi<strong>rm</strong> ground e.g. cemented floor. The ground must be level in<br />
order to avoid tensions in the machine when fixing it to the floor.<br />
Check that the <strong>motor</strong> is branched to the right voltage. Also check the direction of rotation. Plates<br />
with "Forward" and "Reverse" are mounted on the protection cover of the foot switch.<br />
Maintenance<br />
The machine is delivered with greased bearings for about 200 hours' continuous duty. After this<br />
period it should be lubricated with ball bearing grease of good quality e.g. Esso Multi Purpose<br />
Grease H or equivalent.<br />
List of points of lubrication (6 grease fittings):<br />
1 Grease fitting (51) on each side of the front part (8) on a level with the lower rolls (6)<br />
1 Grease fitting (51) on each side of the rear part (2) on a level with the lower rolls<br />
2 Grease fittings (28) inside the recesses of the cover (38)<br />
The numbers within brackets refer to the section drawing.<br />
Daily check<br />
• Brake function of the <strong>motor</strong><br />
• All emergency stop functions<br />
10
Change language