You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
KNOW YOUR LATTECCINO<br />
1. ATTACHMENT<br />
FOR FROTHING MILK<br />
2. ATTACHMENT<br />
FOR HEATING MILK<br />
3. LID WITH SPINDLE<br />
4. CORDLESS JUG WITH<br />
NON STICK COATING<br />
5. ON BUTTON<br />
WITH POWER NEON<br />
6. POWERBASE<br />
WITH CORD TIDY<br />
All illustrations are for representation only,<br />
your model may vary from illustrations shown.<br />
6<br />
FROTHING MILK<br />
Use the frothing attachment to create a dense and creamy<br />
froth for topping your cappuccinos or livening up your instant coffees.<br />
1 SCREW ON 2<br />
Hold the spindle tight and<br />
screw the frothing<br />
attachment on clockwise, or<br />
vice versa to remove.<br />
4<br />
TURN ON<br />
Push the ON button to start<br />
frothing.This will take<br />
60 - 75 seconds. When<br />
frothed the neon will go out<br />
and the Latteccino will stop.<br />
Pour milk into the jug<br />
between the minimum mark<br />
and the 150ml mark.<br />
DO NOT FILL ABOVE<br />
THE 150ML MARK.<br />
5<br />
FILL WITH MILK<br />
OPEN & SERVE<br />
To open, rotate the lid<br />
anti-clockwise and lift.<br />
Pour the frothed milk on<br />
your coffee and serve.<br />
7<br />
3<br />
6<br />
ATTACH LID<br />
Place the lid on the jug and<br />
rotate clockwise until the<br />
two arrows meet and the<br />
lid is locked in place.<br />
CLEAN AFTER USE<br />
IMMEDIATELY rinse with<br />
warm soapy water and wipe<br />
clean after EACH use. Before<br />
making the next round of<br />
milk froth wait 2 minutes.