Glassbond Sauereisen Electric Resistor Cement No

More documents

Recommendations

Info

Application/Instructions No78/3 should be thoroughly remixed before using. Weigh approximately 33 parts powder and 10 parts water. Place powder in a clean mixing container. Add water to the powder at one time while mixing- do not add water gradually. Continue mixing until a smooth, uniform consistency is obtained. Mixing may be done with a slow-speed mixer or by hand with a spatula. Minimum amount of water should be used as excess water reduces mechanical strength, increases shrinkage and delays set time. Failure of cement to adhere indicates setting has begun- discard cement. Do not attempt to re-temper by adding more water. No.78/3 may be applied by brushing, dipping or spraying. No.78/3 is suitable for use on production lines with mechanical dispensers or applicators because it will not harden in the equipment during normal operation. No.78/3 should be thoroughly remixed to a smooth, uniform consistency prior to use. Surfaces to receive No.78/3 should be clean and free of grease and dirt. Porous substrates should be dampened slightly with Thinning liquids Nos.14 or 15 prior to the application of No.78/3. No.78/3 should be used in thin applications; apply several coats where a heavy layer is desired. In multiple coat applications, each coat must be thoroughly dry prior to applying additional coats. If necessary, Thinning Liquid Nos. 14 or 15 should be used where the No.78/3 cement is required in a thinner consistency. Minimum amounts of liquid should be used as excess liquid reduces mechanical strength, increases shrinkage and delays set time. No.78/3 should not be applied in a thickness greater than ¼ ". SSeetttti iinngg//CCuurri iinngg No.78/3 cures by air drying at room temperature. Drying time depends on the consistency and thickness of the application. Normally 18-24 hours drying at ambient temperature is sufficient. When the cement has minimal exposure to air, or if it is desired to accelerate the cure, low temperature oven drying at 82°C can be used. Avoid steaming while drying. If the cement will be exposed to elevated temperatures, contact Glassbond for appropriate drying schedule recommendation. If high humidity resistance is required and it is impractical to fire cement, moisture-resistant lacquer or silicone coating should be applied to the exposed surfaces. PPaacckkaaggi iinngg This material is supplied in various types and sizes of containers. See price list for details. SShheel llf f LLi iif fee No.78/3 powder has a shelf life of twelve (12) months when stored in unopened, tightly sealed containers in a dry location at 21°C. If there is any doubt as to the quality of the material, contact Glassbond. CCaauutti iioonn Consult the Material Safety Data Sheets and container label Caution Statements for any hazards in handling this material. Waarrrraannttyy We warrant that our goods will conform to the description contained in the order and that we have good title to all goods sold. WE GIVE NO WARRANTY, WHETHER OF MERCHANTABILITY, FITNESS FOR PURPOSE OR OTHERWISE, EXPRESS OR IMPLIED, OTHER THAN AS EXPRESSLY SET FORTH HEREIN. Users shall determine the suitability of the product for intended application before using. Manufactured under licence from Sauereisen Pittsburgh PA.
11 PPrroodduucct t Iddeennt I tificcaat tioonn: : PRODUCTT HEALLTTH AND SAFFETTY A DATTA SHEETT Glaassssbboonndd SSaauueerreei isseenn PP7788/ /33 Issssuuee I Noo 44, , Issssuuee I Daat tee 2244. .0088. .22000066 SShheeeet t 11 oof f 44 PPrroodduucct t Naamee: : Glassbond Sauereisen Electric Heater Resistor Cement P78/3 PPaacckkaaggi inngg: : Plastic containers Deessccrri ippt ti iionn: o : Coating/embedding for resistors, coils and heating elements. Cool loouurr aanndd aappppeeaarraannccee: : White powder SSuuppppl lieerr' ''ss nnaamee aanndd aaddddrressss: e : Glassbond (NW) Limited Westside Industrial Estate Jackson Street St Helens Merseyside WA9 3AT UK TTeel l Noo: : +44 (1744) 730334 FFaaxx Noo: : +44 (1744) 451661 Maannuuf faacct tuurreerr' ''ss nnaamee aannd d aaddddrreessss: : Glassbond (NW) Limited Westside Industrial Estate Jackson Street St Helens Merseyside WA9 3AT UK 22 Coomppoossi itioonn/ /Innf foorrmaat tioonn oonn Innggreeddi I r ieenntss t CAS No Components Range Risk Classification 14808-60-7 Silica Flour 40 R20, R48/20 Xn 1344-09-8 Sodium Silicate 10 R37/38 Xi
Page 1: Glaassssbond Saaueerreei isseen Ele
Page 5 and 6: PRODUCTT HEALLTTH AND SAFFETTY A DA

Glassbond Sauereisen Electric Resistor Cement No

Create successful ePaper yourself

Delete template?

Save as template?