Manual UK Gloria b4.10Y - 7cars.ca
Manual UK Gloria b4.10Y - 7cars.ca
Manual UK Gloria b4.10Y - 7cars.ca
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Controlli periodici e<br />
<strong>ca</strong>mbi<br />
Chain transmission-installing and<br />
Before installing the chain is advisable to lubri<strong>ca</strong>te it<br />
with oil chains that will not damage the O-ring rubber.<br />
Bring the axle exactly perpendicular to the direction of<br />
travel through the tie rods adjustment.<br />
The pinion must be close to 85 Nm.<br />
Pay attention to the disposal of several screws that are<br />
closed on additional <strong>ca</strong>rterino be<strong>ca</strong>use their length is<br />
different and not interchangeable.<br />
The nut that tightens the pinion must be screwed with<br />
the flat part to the outside of the <strong>ca</strong>r.<br />
Caution: a chain stretched too overloaded the engine<br />
and other structural parts of the transmission. A chain<br />
too las<strong>ca</strong> instead <strong>ca</strong>n skip damaging parts it comes into<br />
contact. Check often tension in the chain and stick to<br />
the specifi<strong>ca</strong>tions.<br />
Verify that the game with chain fit the relationship is<br />
approximately 10-15 mm per side on the top of the<br />
chain (red arrows).<br />
To verify the correct tension, turn the axle until you<br />
find the point of maximum tension<br />
maintenance<br />
+/- 10-15<br />
mm<br />
B 4-10 Y 40
Change language