Manual UK Gloria b4.10Y - 7cars.ca

The shock absorbers are installed on
Gloria type gas monotubo high pressure
with a regulation 4 rotary positions that
affect that is on the compression stroke.
The shock loads of nitrogen with a
pressure range is from 18 to 20 bar.
The reference red equals calibration softer
(position A), turning the knob clockwise to
the next position will result in a hardening
of calibration (position B), until the C
position, then continuing to return to
position A.
On the following page is the chartfrequency
load.
If interested in figures, contact Gloria srl.
Shock-asborbers
Regolazioni B 4-10 Y 85