2011-2012 cataloGuE - CR Kennedy

2011-2012 CATALOGUE

Foreword 

The latest catalogue of C.R.Kennedy surveying and 

construction equipment exhibits some of the most exciting 

technologies on today’s market. Leica Geosystems has 

continued to earn its place as a world leader in surveying 

technologies with the release of their Viva range of GPS/ 

GNSS and TPS sensors. 

Leica Geosystems and C.R.Kennedy together have created 

SmartNet Aus, a CORS network of GNSS reference stations 

across Australia, opening vast new potentials in surveying, 

agriculture, and asset monitoring. The subscription based 

service is continually expanding and private owners may add 

their own base stations to the network in return for royalties. 

In the construction field, Leica continues to build on its 

20 years of Disto models with a completely new D series 

range, and new line and point lasers. The new Digicat 550i 

takes the difficulty out of locating underground assets. 

With one national management group operating across 

Australia, C.R.Kennedy & Company Pty Ltd is the only true 

national survey and construction supplier. Whether you’re 

a sole trader or a large multi-national, C.R.Kennedy can 

offer a level of service to match the calibre of its products 

through its service centres in each state capital, extensive 

hire fleets, maintenance agreements, finance options, 

training and technical support. 

Stephen Beard 

Director

Contents 

Leica Levels 2 

Pentax Levels 3 

Pentax Theodolites and Total Stations 3 

Leica Builder 4 

Total Stations – Leica FlexLine 5 

Total Stations – TS30 Precision 6 

Leica Viva Total Stations 7 

Leica Viva GPS/GNSS 8 

Leica Viva Field Controller 9 

Monitoring 10 

Leica Viva GIS 11 

TPS & GPS Software 12 

Reference Stations 13 

SmartNet Aus – Networking Australia 14 

Leica HDS 15 

3D Scanning 16 

Rail Alignment 17 

Underground Service Locators 18 

Machine Control Digging Solutions 19 

Machine Control Grading Solutions 21 

Machine Control Paving Solutions 22 

Machine Control RedLine 23 

Disto 24 

Disto Accessories 25 

Agatec Laser Level 26 

Leica Lino Laser Levels 27 

Leica Laser Levels 28 

Mikrofyn Laser Level 30 

Tuf Laser Levels 31 

Pipe Lasers 32 

Digital Spirit Levels 33 

Survey Accessories – Batteries 34 

Survey Accessories – Carriers 36 

Survey Accessories – Chargers 37 

Survey Accessories – Chartwell Field Books 38 

Survey Accessories – Compasses & Clinometers 39 

Survey Accessories – CST Accessories 40 

Survey Accessories – CST Prisms 41 

Survey Accessories – GME Radios 42 

Survey Accessories – HP Calculators 43 

Survey Accessories – HPRC Cases 43 

Survey Accessories – Measuring tapes 44 

Survey Accessories – Measuring wheels 45 

Survey Accessories – Memory 46 

Survey Accessories – Miscellaneous 47 

Survey Accessories – Optical Plummets 49 

Survey Accessories – Pentax Binoculars 50 

Survey Accessories – Pentax Cameras 50 

Survey Accessories – GPS Accessories 51 

Survey Accessories – Planometers 52 

Survey Accessories – CST Poles 53 

Survey Accessories – Leica Poles 54 

Survey Accessories – Polytech Pegs 55 

Survey Accessories – Leica Prisms 56 

Survey Accessories – Prisms & Accessories 57 

Survey Accessories – Spray Paint 59 

Survey Accessories – General Flagging Tape 59 

Survey Accessories – Staves 60 

Survey Accessories – Leica Tribrachs 61 

Survey Accessories – Bi-Pods 62 

Survey Accessories – Tripods 63 

Survey Accessories – GOSCAM 65 

Survey Accessories – Wall Stations 65 

Survey Accessories – ikeGPS 66 

C.R. Kennedy National Hire Fleet 67 

Repairs and Service 67 

Technical Support & Training 68 

Training Course 69 

Machine Control Training Centre 70 

Maintenance Agreements 71 

Insurance 71 

Finance Options 71

Leica Levels 

NAK2 For survey grade leveling. 

(# LG352038) 

- Auto level. 

- Accuracy 1km run, 0.7mm. 

- 0.3mm accuracy with parallel 

plate micrometer. 

- 32 x magnification. 

- Operating temp -20° to +50°. 

- IP53 weather resistant. 

- 3 year warranty. 

NA700 series Mid range leveling. 

(NA720# LG641982, NA724, 

LG641983, NA728# LG641984). 

- NA720: 1km run, 2.5mm. 

- NA724: 1km run, 2.0mm. 

- NA728: 1km run, 1.5mm 

- NA730: 1km run, 1.2mm. 

- Shortest focus range of 0.5m. 


- IP57 – weather proof. 

- Operating temp -20°C to +50°C. 

Runner 20/24 For construction 

leveling. (RUNNER 20# LG727585, 

RUNNER 24# LG727586) 

- Runner 20: 1km run, 2.5mm. 

- Runner 24: 1km run, 2.0mm. 

- 20 or 24 x magnification. 

- 0.8 m shortest focus distance. 

- Water resistant to IP55. 



Jogger 20/24 

For construction leveling. (JOGGER 20# 

LG762263, JOGGER 24# LG762264) 

- Jogger 20: 1km run, 2.5mm. 

- Jogger 24: 1km run, 2.0mm. 

- 20 or 24 x magnification. 

- IP54 weather proof. 


- 1m shortest focusing distance. 


Sprinter 50/150M/250M 

Digital Level 

Simply aim, focus and press measure. 

Fast and error free digital leveling. 

(Sprinter 50# LG762628, Sprinter 150# 

LG762630, Sprinter 250# LG762631) 

- Sprinter 50 accuracy: 1km run, 2mm. 

- Sprinter 150/250 Accuracy: 

1km run, 1mm. 

- Measures bar coded staff up to 

100m away. 

- 1000 point memory for M models. 


DNA 03/10 Digital Level 

Up to a 50% time saving over 

conventional levels. (DNA03# 

LG723289, DNA10# LG726540) 

- Alphanumeric keypad. 

- DNA03 Accuracy: 1km run, 1.5mm. 

- DNA10 Accuracy, 1km run, 1.0mm. 

- 6,000 measurement internal memory. 

- Rechargable or Alkaline. 

- Measures bar coded staff up 

to 110m away. 


2 

2010-2011 CATALOGUE

Pentax Levels 

AP For construction leveling 

(AP-201# 519216, AP-241# 519218, 

AP-281# 519217) 

- Available in 20x, 24x and 28x 

magnification. 

- AP-201 Accuracy, 1km run, 2.5mm. 

- AP241 Accuracy, 1km run, 2.0mm. 

- AP281 Accuracy, 1km run, 1.5mm. 

- IP54 weather resistant. 

Solution Levels 

(Solution 20x# 519212, 

Solution 32x# 519213) 

- Available in 20x and 30x magnification. 

- Low cost SOLUTION to optical leveling. 

Pentax Theodolites and Total Stations 

Pentax ETH-320 (#519235) 

- Compact and portable electronic 

theodolite. 

- 20 second accuracy. 

- 30x magnification. 

- 15 hours operation. 

- Optical plummet in base. 

- Applications include: 90° layout, 

alignment measurements, and 

anchor bolt layout. 

Pentax W-800 

Available in 2” (#519405), 3” (519406) 

and 5” (519408) accuracies. 

- Built in Carlson SurvCE 2.0 software. 

- Large colour display. 

- Graphical CAD. 

- Advanced functions for surveying 

and staking. 

2010-2011 CATALOGUE 3

Leica Builder 

Leica Builder 100 if you need 

to trust angles and alignments 

(# LG772727) 

With a laser plummet for simple and 

fast setup over control line, dual axis 

compensation for accurate plumbing, 

endless drives eliminating steps, 

audible notice for 90° turns, graphical 

leveling aid for fast and convenient 

setup and IP55 rating, the Leica Builder 

100 is an outstanding theodolite. 

Leica Builder 200 when tapes are 

a thing of the past (#LG772730) 

Traditional layouts require many steps 

and manipulations. The Leica Builder 

reduces these steps. As such the Leica 

Builder 200 adds benefit by reducing 

the number of set-ups and offers 

laser-aided layouts up to 80m/260ft. 

Its serial interface allows connection 

to any 3rd party device/program. 

3 languages loadable. 

Leica Builder 300 when a 

construction plan goes digital 

(#LG772731) 

Call up plan data and record points 

eliminates read and write errors, data 

exchange via industrial grade USB 

stick simplifies data handling, a direct 

DXF download function, tracking 

mode, setup any-where function, 

optional volumes calculation and 

laser distance measurements up to 

120m/400ft make the Leica Builder 

300 a real workhorse. 

Leica Builder 400 if performance 

makes the deal 

With an extended working range to 

prisms of up to 500m/1600ft (optional 

3500m/2.2mi), a full alpha-numeric 

keyboard for rapid entry/recall of point 

numbers (cell phone style use), short 

range laser distance measurements 

with 15m/50ft for quick as-builts 

of inaccessible points and a huge 

memory of 50,000 points, Leica Builder 

400 is the high performer in its league. 

Leica Builder 500 when versatility 

meets efficiency (# LG772736) 

The “flagship” of the Leica Builder 

Series equipped with all of the above 

features plus wireless communication 

via Bluetooth, full laser distance 

measurements up to 250m/820ft 

and up to 1.5mm accuracy at 100m 

covers the full range of tasks to be 

performed on any construction site. 

An -30°C option is available 

additionally. 

Builder Specifications 

Leica 

Builder 100 

Leica 

Builder 200 

Leica 

Builder 300 

Leica 

Builder 400 

Leica 

Builder 500 

Full Power Site Software 3 

Wireless Communication 3 

Prism Measurement Mode 3 3 

Full alphanumeric keyboard 3 3 

Volumes Calculation 3 3 3 

Data Im/Export to USB Stick 3 3 3 

PC/Handheld Interface 3 3 3 3 

Laser Distance Measure 3 3 3 3 

Control Line Setup 3 3 3 3 

3 Languages 3 3 3 3 3 

Leveling Aid 3 3 3 3 3 

Dual Axis Compensator 3 3 3 3 3 

Laser Plummet 3 3 3 3 3 

Li-Ion Batteries 3 3 3 3 3 

Internal Memory [points] – – 15’000 50’000 50’000 

Angular Accuracy 9’’, 6’’ 9’’, 6’’ 9’’, 6’’ 9’’, 5’’ 9’’, 5’’, 3’’ 

Distance without reflector (90% reflective) – 80 m 120 m 150 m 250 m 

Distance to reflective tape (60mm x 60mm) – 250 m 250 m 150 m 250 m 

Distance to glass prism – – – 500 (3500) m 500 (3500) m 

4 


Total Stations – Leica FlexLine 

For basic to advanced users with 

the need for flexibility and performance. 

To ensure that you stay one-step-ahead, Leica Geosystems has developed 

a new generation of Total Stations using the latest technology, the Leica 

FlexLine. For the first time, hardware and software options can be simply 

selected so that the FlexLine Total Station exactly meets your requirements. 

Leica FlexLine TS02 

Ideal today, perfect tomorrow 

The ideal Total Station for standard 

measurement tasks. Designed 

especially for mid-to-low accuracy 

applications. It comes complete with 

a standard set of application software 

that guide you through your daily work. 

If more convenient, use Bluetooth® 

wireless technology to connect any data 

collector, e.g. the Leica CS10/15. Use 

SmartWorx Viva or the Software which 

best suits your task and familiarity. 


Flexibility that counts 

For complete flexibility a Total Station 

that is ready for any challenge. 

Designed for mid accuracy applications. 

As standard, an alpha-numerical 

keyboard and a complete set of 

application software is included. For 

additional flexibility, a wide range of 

options ensures that you can always 

count on your TS06 Total Station. 


Performance guaranteed 

A true performance orientated Total 

Station that continually delivers 

regardless how demanding the task 

may be. Designed especially for mid-tohigh 

accuracy applications. Equipped 

with all FlexLine features from 

removable USB memory, Bluetooth® 

wireless technology, Electronic 

Guide Light to a complete range 

of application software, your TS09 

guarantees maximum performance. 

Flexline Specifcations Leica TS02 Leica TS06 Leica TS09 

High accuracy instrument 

1” angular accuracy – – 3 

1 mm + 1.5 ppm distance measurement accuracy – – 3 

Distance measurement 

Prism, 3500 m range 3 3 3 

Non-Prism: 30 m FlexPoint incl. Laserpointer 0 3 3 

Non-Prism: >400 m PinPoint – Power 0 0 0 

Non-Prism: >1000 m PinPoint – Ultra 0 0 0 

Data storage/Communication 

Internal memory 3 3 3 

Enhanced Internal memory – 3 3 

Removable USB memory stick, mini-USB port 0 0 3 

Integrated Bluetooth® wireless technology 0 0 3 

Keyboard 

Alpha-numerical 0 3 3 

Second Keyboard 0 0 3 

1-functionTrigger key 3 3 3 

2-functionTrigger key – 3 3 

FlexField Onboard Software 

Topography (Orientation & Surveying), Stake Out, Resection, Height Transfer, 

Construction, Area (Plan & Surface), DTM Volume calculation, Tie Distance (MLM), 

Remote Height, Hidden Point,Backsight Check, Offset, Reference Line 

3 3 3 

Reference Arc, Reference Plane, COGO, Road 2D 0 3 3 

Roadworks 3D, TraversePRO – 0 3 

Electronic Guide Light (EGL) 

Electronic Guide Light (EGL) for stake out 0 0 3 

Arctic Version 

Temperature -35° C (operation) 0 0 0 

3 included 0 Optional – not included 


Total Stations – TS30 Precision 

The new Leica TS30 total station is unique. This new total 

station redefines precise surveying by offering unmatched 

accuracy and quality. Never again will surveyors with 

demanding tasks need to make compromises, the TS30 total 

station is ready for any challenge. 

The TS30 is designed for when only 0.5” accuracy is acceptable. 

Performance that counts 

Achieving both high performance 

and high accuracy is challenging. The 

Leica TS30 has reached a new level of 

performance, whereby high accuracy 

surveying can be achieved in an easy, 

fast and reliable way, regardless of the 

project demands. 

World’s best Dynamic 

Tracking Performance 

New direct drives using Piezo 

technology were developed 

specifically for the TS30 to 

achieve maximum acceleration 

and speed whilst still retaining 

accuracy. 

Fastest Start-to-Finish Workflow 

 

Long service intervals 

Leica TS30 is designed to 

withstand the roughest use in 

the most severe environments. 

It will operate throughout a 

wide temperature range and is 

protected against wind driven 

rain, sand and dust. The TS30 

can operate for extremely long 

intervals without suffering from 

wear and tear. 

Pride in accuracy 

Surveyors take great pride in accuracy. 

The Leica TS30 delivers impressive 

performance in individual disciplines. 

But most importantly it is a champion 

in perfectly combining angle 

measurement, distance measurement, 

automatic target recognition and 

motorisation. The accuracy of the Leica 

TS30 is in a league of its own, a true 

companion for surveyors with pride. 

Leica TS30 accuracy – the facts: 

Angular accuracy – 0.5” 

Pinpoint EDM accuracy 

0.6 mm ± 1 ppm to prism 

2 mm ± 2 ppm to any surface 

Automatic Target Recognition 

(ATR) accuracy – 1” 

The Leica TS30 offers unlimited 

flexibility and scalability through 

complete compatibility with system 

1200 accessories. 

6 


Leica Viva Total Stations 

Total Viva Solution - Leica TPS together with CS controller, 

GNSS and SmartStation. 

The Leica Viva TS11 and TS15 are the fastest imaging total stations in the 

world. Productivity and documentation rises to the next level. Complete 

every project easier and faster than ever before. Designed to work seamlessly 

together, Viva controller, Viva GNSS, Viva TPS, and Viva SmartStation offer a 

comprehensive system. 

TS11 – Manual Total Station 

Leica Viva TS11, is the most advanced 

manual total station with the inclusion 

of advanced imaging functionality and 

the Leica SmartWorx Viva easy-to-use 

onboard software. Leica Viva TS11 

raises productivity to the next level 

with imaging and Leica SmartWorx 

Viva software. The unique capturesketch-link 

functionality enables high 

resolution total station images to be 

captured, enhanced with sketching and 

then linked to any point of interest. 

Costly revisits can be avoided to 

significantly improve productivity. Every 

vision on every scale becomes reality 

with ease. 

TS15 – Robotic total station 

The fastest imaging total station 

The Leica Viva TS15 is a state-ofthe-art 

total station that provides 

advanced imaging functionality 

combined with dynamic tracking 

capabilities for one-person surveying. 

Furthermore, Leica Viva TS15 features 

the easy-to-use Leica SmartWorx Viva 

onboard software. 

The Leica Viva TS15 adds a highresolution 

camera to further enhance 

total station productivity. Traditional 

robotic operation is significantly 

improved with imaging features 

through Image Assisted Surveying 

and Documentation. 

Thanks to live streaming of the total 

station view on the robotic controller, 

remote points can be easily measured 

with the new tap, turn & measure 

functionality without returning to the 

total station. 

In addition, the TS15 now also 

includes new grid scanning 

functionality. It is now easily possible 

to graphically define an area to be 

scanned on the total station view 

shown on the display. The total 

station will then rapidly scan the 

object to measure a true grid with 

survey accuracy. 

SmartStation & SmartPole 

Extend the TS15 by integrating full 

GNSS functionality to further improve 

productivity. The TS15 can be used as 

a Leica SmartStation for TPS setup 

without the need of control points, 

traverses and resections, or as a Leica 

SmartPole to save time with setup ‘Onthe-fly’ 

and measure parallel with TPS 

and GNSS for double productivity. 


Leica Viva GPS/GNSS 

Leica Viva GS10 

Leica Viva GS15 

Leica Viva GNSS is a complete range of versatile GNSS solutions 

for you. From completely integrated, to totally modular solutions; 

Viva GNSS provides a system to master all of your tasks. 

8 

Proven GNSS technology 

Built on years of knowledge and 

experience, the Leica GS10 and GS15 

deliver the hallmarks of Leica GNSS – 

reliability and accuracy. 

- SmartCheck – RTK data-processing 

to guarantee correct results. 

- SmartTrack – advanced four 

constellation tracking of all GNSS 

satellites today and tomorrow. 

- SmartRTK – delivers consistent 

results in all networks. 

Leica Viva GS08 NetRover - 

Simple “Turn-on & Measure” 

GNSS solution 

The Viva NetRover using the new 

Leica Viva GS08 GNSS receiver has 

been designed to create an ideal 

RTK network rover. 

Consisting of a GS08 

GNSS receiver and 

a CS10 3.5G field 

controller to create an 

easy to use all-inone 

GNSS Network 

Solution. The Leica 

Viva NetRover is 

optimised for RTK 

network use. All 

components work 

seamlessly together, 

creating a lightweight 

and cable-free network rover. The 

NetRover automatically connects to any 

reference station network, and with full 

support of the RTCM 3.1 transformation 

message, it is no longer necessary 

to measure control points for the 

determination of a local transformation, 

saving time and reducing errors. 

2010-2011 CATALOGUE 

Work as you want to 

The Leica GS10 and GS15 are 

designed to suit any surveying task. 

- Exchangeable communication 

devices for field base stations and 

RTK rovers with removable SIM cards 

(Built-in for GS15). 

- Fully scalable sensor allows you to 

buy only what you need today and 

upgrade with additional functionality 

as you need it. 

- Integrated web server to configure 

the logging of Leica or RINEX raw 

data and measure with one button 

press in the field. 

Leica Viva GS12 SmartPole – 

Complete freedom of choice 

The Viva GS12 is a lightweight receiver 

that ergonomically combines GNSS 

and TPS for a SmartPole setup, an 

integrated ‘All-onthe 

Pole’ system for 

productive one-person 

surveying. By combining 

the GS12 GNSS receiver 

and a 360º prism, 

you can use GNSS to 

orientate your TPS and 

easily switch between 

GNSS and TPS to 

measure any point with 

total flexibility. With the 

SmartPole there is no 

need to first measure 

orientation points. By 

starting the survey and conducting 

setup on-the-fly whilst completing 

measurements, you save time in survey 

planning and execution. Viva GS15 

GNSS receiver can also be used with 

Viva SmartPole. 

Rugged 

The Leica GS10 and GS15 are built for 

the most demanding environments. 

- IP67 protection against dust and 

immersion to 1m. 

- Built for extreme temperatures 

of -40°C to +65°C. 

- Integrated intenna technology 

to avoid breaking, losing or 

forgetting antenna (for GS15). 

Leica Viva Uno 

Packed with features and designed 

for use in extreme environments. 

- IP67, operating temperature -30 

to +60° C. 

- SD and CF cards and USB stick support 

- Camera, WLAN, Bluetooth, colour VGA 

touch screen. 

- Easy to use, handheld GNSS 

data collector. 

- 14 channel L1 GPS, GLONASS 

& SBAS sensor. 

- Post processing accuracy 10mm ±2ppm. 

- DGPS accuracy < 0.4m. 

- Wide range of apps for all 

surveying work. 

Leica Viva Uno 

CS15 (left) 

and CS10 (right).

Leica Viva Field Controller 

The CS10 and CS15 Leica Viva controllers use a high quality 

measurement engine combined with proven antenna technology 

to provide reliable data and accurate measurements. 

Combined with Leica SmartWorx Viva surveying software, data 

collection has never been so easy. 

Reliable data and 

measurements 

High quality measurement engine and 

proven antenna technology provide 

the highest quality measurement data. 

- 14 channel L1 GPS, GLONASS, 

SBAS sensor 

- Post processing accuracy 10mm 

+ 2 ppm 

- DGPS accuracy

Monitoring 

We live in a dynamic world. Buildings and dams settle, 

bridges flex and vibrate, rock masses shift, mud slides, 

glaciers flow and volcanoes erupt. Whether by human 

activity such as mining and construction or by natural 

processes such as climate change and erosion, the world 

in which we live is continually changing. 

Leica TM30 - #LG757129 

The Leica TM30 is designed to meet 

the highest accuracy standards. High 

precision measurements, combined 

with automatic, fast and silent 

operation ensures that the TM30 

detects the smallest movement in all 

monitoring applications. Combined 

with GeoMoS software, the TM30 

provides the highest performance and 

accuracy for monitoring applications 

in the market to achieve maximum 

productivity and efficiency. 

The Leica TM30 succeeds the 

highly acclaimed Leica TCA2003 

and TCA1800 Total Stations and 

is designed specifically for use in 

monitoring applications. Equipped 

with direct drives based on the latest 

Piezo technology, the Leica TM30 

accelerates extremely fast, allowing 

shorter measurements cycles when 

working with multiple prisms. The 

extraordinary silent drives enable the 

TM30 to be installed in urban areas 

for monitoring applications with zero 

noise pollution. 

The Leica TM30 offers accurate angle 

measurements of 0.5” or 1”. Distances 

can now be measured with Leica 

Geosystems’ proven PinPoint EDM 

Technology with an unprecedented 

precision of 0.6 mm + 1 ppm on 

prisms. On natural surfaces a high 

accuracy of 2 mm + 2 ppm is achieved. 

Automatic prism detection is possible 

up to 3,000 meters away with 

millimeter accuracy. 

- 0.5” angle accuracy. 

- EDM accuracy of 0.6mm ± 1ppm 

to prism, and 2mm ± 2ppm to 

any surface 

- EDM range of 3000m ± 7mm. 

- Continuous operation. 

- Long service intervals 

- Theft protection. 

- Low power consumption. 

- Detects correct prism when multiple 

are in range. 

- Zero noise pollution. 

- Extremely fast workflow. 

GMX 

902GG 

NIVEL 

210 

NIVEL 

220 

GMX 

901 TM30 

GMX 

Monitoring Prism 

GMP104 - #LG641762 

Mini Prism with L-bar : Mini 

monitoring prism mounted in 

metal holder. Supplied with 

L-bar for fixed installations. The 

prism offset is dependant on 

the mounting position. Max. IR 

range of 2000m (7000ft). 

Monitoring Prism 

GPR112 - #LG726295 

Large diameter monitoring prism 

for long range measurements. 

For installation on M8 or 5/8” 

threaded bolts. Built-in filter 

prevents condensation on the 

reflecting surface. Rain/snow 

cover available seperately. Max. 

range with IR of 2500m. 

Leica 

GeoMoS 

Leica 

GeoMoS 

Web 

Monitoring Software 

Leica GeoMos: Each monitoring project has 

specific measurement and accuracy requirements. 

The Leica GeoMoS software provides a highly 

flexible automatic deformation monitoring system 

that is able to combine geodetic, geotechnical and 

meteorological sensors to match the needs of your 

monitoring project, whether it is large or small, 

temporary or permanent. 

10 


Leica Viva GIS 

Leica Viva Controller – 

Zeno 10 and Zeno 15 

Leica Zeno 10 & Zeno 15 are designed 

for high-accuracy mapping in real-time 

and post-processing. 

The most rugged 

and versatile GNSS/GIS 

Handhelds in 

the market 

High performance GNSS/GIS handhelds 

give you all the power you need. The 

perfect field tools for maintaining 

your GIS whether you are working for 

a utility company, local government, 

federal agency, or for anyone managing 

or mapping infrastructure or assets. 

Leica Zeno GIS series delivers the 

quality and reliability you can trust. 

- IP67 and -30 to 60° C operation 

- Combine GIS and Survey equipment 

High-Performance 

sub-meter GNSS/GIS 

Handhelds 

Delivering consistent sub-meter 

accuracy both real-time and postprocessed. 

Leica Zeno 10 and Leica 

Zeno 15 handhelds combine a highperformance 

sub-meter GNSS sensor 

with a rugged handheld for anyone who 

needs accurate and reliable data even 

in the most demanding environments. 

- DGPS

TPS & GPS Software 

You’ve collected your data. The 

hard work is done. Or so you 

think. Without the right software 

to process that data you could 

end up in a real mess. 

Leica Geo Office 

One Office Software for all your 

instruments Seamlessly import 

and combine data from all your 

instruments to produce the final 

results. Manage and combine your 

data with Leica Geo Office to ensure 

you get the best results. 

- GNSS instrument support 

- TPS instrument support 

- Level instrument support 

Best-in-class Processing Options 

Years of experience in the fields of 

surveying and GNSS data processing 

resulted in the world’s most powerful 

processing options. 

- GNSS data processing using 

SmartCheck techniques 

- TPS processing – from simple station 

updates to complex traverses 

- Level processing 

- Combined network adjustments 

- COGO calculations, Datum 

transformations and Volume 

calculations 

All components integrated in one 

software. Leica Geo Office enables you 

to manage your project in an integrated 

way. No need to transfer data between 

the various modules. 

- Use GNSS processing to automatically 

update SmartStation setups 

- Combine GNSS and terrestrial data 

with an integrated Least Squares 

Adjustment 

- Benefit from volume calculations 

being instantly updated whenever 

coordinates change 

GNSS Spider 

GNSS Spider is an integrated software 

suite for centrally controlling and 

operating GNSS reference stations and 

networks. GNSS Spider is modular and 

scalable and can be tailored to suit 

various GNSS surveying, seismic and 

strucutural monitoring applications. 

The advanced SpiderNET solution 

provides long-range high-accuracy 

Network RTK and centralised data 

distribution. The Spider Business Center 

portal provides powerful and secure 

access management. 

Professional service providers’ 

world-wide count on using the best 

infrastructure solution for their needs 

– Join them in using Leica GNSS 

Spider solutions 

LISCAD 

LISCAD is a purpose made software for 

the Engineer and Surveyor. Data from 

virtually any surveying instrument can 

be imported and turned into finished 

plans so easily; you’ll wonder how you 

ever managed without it. 

12 


Leica Reference Stations 

Whether providing 

corrections from just a 

single reference station, 

or an extensive range of 

services from a nationwide 

RTK network - innovative 

reference station solutions 

from Leica Geosystems 

offer tailor-made yet 

scalable systems, designed 

for minimum operator 

interaction whilst providing 

maximum user benefit. 

Leica GRX1200+ 

High Performance GNSS Receiver 

The Leica GRX1200+ Series delivers 

uncorrelated data of the highest 

quality under all conditions making 

them ideal for all reference station 

applications. The GRX1200+ Series is 

able to track the new multi-frequency 

signals from modernised GPS (including 

L5 and L2C), GLONASS and Galileo. 

The benefits are excellent signal 

strength, reliable tracking to low 

elevations, phase and code multipath 

suppression, high precision code and 

phase measurements up to 20 Hz, 

high reliability and robustness and low 

power consumption. 

Leica AR10 

Multi-Purpose GNSS Antenna with 

Integrated Radome 

Wideband reference station antenna 

with a large ground plane and 

integrated radome. The AR10 is the 

ideal antenna for a wide range of 

high accuracy permanent and mobile 

base station applications. Using 

state-of-the-art technology it offers 

near choke-ring level performance but 

without the weight, size and cost. An 

all new antenna design, together with 

a large ground plane and integrated 

radome, ensures that the AR10 

provides exceptional signal tracking, 

phase centre accuracy and multipath 

suppression. 

Leica GR10 

Plug and Play GNSS Receiver 

The Leica GR10 is a next generation 

GNSS reference station receiver that 

combines the latest state-of-the-art 

technologies with a streamlined “plug 

and play” workflow. Designed for a 

wide variety of GNSS reference station 

applications, the Leica GR10 offers 

new levels of simplicity, reliability 

and performance. The GR10 provides 

excellent low noise code and phase 

data with logging and streaming rates 

up to 50 Hz. The powerful onboard 

RefWorx software features flexible 

data handling and communication, 

ensuring high performance and secure 

long term operation. 

Leica AR25 

3D Choke Ring GNSS Antenna 

Revolutionary 3D choke ring that sets 

new standards in low elevation tracking 

and multipath reduction. The new 

AR25 has been designed for all existing 

and currently planned signals of the 

GPS, GLONASS, Galileo and Compass 

(Beidou) systems. The AR25 uses a new 

ultra-wideband Dorne-Margolin element, 

the industry standard for high accuracy 

and performance. Designed for a variety 

of applications, including reference 

stations, monitoring, seismic studies, 

scientific and atmospheric studies, the 

AR25 is a robust high performance 

antenna, built to last. 


What is SmartNet Aus 

SmartNet Aus is a fully comprehensive 

CORS (Continuously Operating 

Reference Station) Network connected 

with Spider (Leica Geosystems 

Reference Network software) to 

provide centimeter level Real 

Time corrections for Surveying, 

Construction, Mining, Machine 

Control and Agricultural Auto-Steer 

Applications via nTrip. SmartNet Aus is 

a joint initiative of Leica Geosystems 

and C.R. Kennedy & Company Pty Ltd. 

Problems with 

conventional RTK 

Single Base RTK: One of the problems 

with current Single Base RTK solutions 

is distance dependant errors. The 

further the rover gets from the base, 

distance dependant errors increase to 

the point of exceeding the accuracy 

required for most tasks. 

Communications: With GNSS 

equipment more readily available to 

users, licensing of UHF frequencies is 

getting crowded. Most people in built 

up areas will only get a 5W license, 

greatly restricting their baseline 

lengths. Even 25W licenses may 

only give you 10km range. Topology, 

buildings, trees and atmospherics 

all affect your baseline lengths 

and with the crowded frequencies, 

clashing of radio signals is common. 

Another consideration is future data 

bandwidth. The increasing number of 

satellites and GNSS Systems means 

more data that has to be transferred 

via the radio. 

Operating Costs: Have you ever 

analysed how much it actually costs 

you to have your own base Interest, 

servicing, firmware upgrades, wear & 

tear, battery charging & replacement 

and insurance all add up to your 

yearly operational costs. Have you 

worked out just how much time you 

have spent driving to and from the 

base to setup and pull down daily 

Is your base in a fixed location How 

secure is it Will it still be there in the 

morning 

The solution: SmartNet Aus 

SmartNet Aus have a network of 

CORS which are connected to 

Spider software to create RTK 

corrections in various formats. 

Spider analyses all the data and 

creates network solutions removing 

distance dependant errors and 

increasing accuracy on long baselines. 

Communications to SmartNet Aus 

require the user to connect their GNSS 

equipment to the internet via either a 

Bluetooth Mobile Phone or proprietary 

modems, from there the user connects 

to the SmartNet Aus nTrip caster to 

receive the corrections. Using nTrip 

eliminates UHF radio issues. No 

Bandwidth issues. No Interference. 

No weak signals due to distance. 

Significantly reduced operational 

costs are another benefit of SmartNet 

Aus. Turn on your GNSS equipment, 

connect to the SmartNet Aus servers 

and you are working. No setup time 

for the base required. Want to perform 

some Static Surveys No worries, log 

onto www.smartnetaus.com and view 

all the RINEX data available with just 

a few mouse clicks. You can even 

upload your Rinex files and let Spider 

Web process the data for you. The 

Spider and GNSSQC Software, Leica’s 

quality control monitoring software, 

continuously monitors the network for 

errors so you know that the integrity 

in the solution is there. Recently, 

SmartNet Aus was commissioned by 

the Gold Coast City Council to provide 

Network RTK over the entire council 

area. SmartNet Aus has installed 

new bases and utilised existing 

bases to provide the Cold Coast City 

Council with centimeter accuracy 

RTK. SmartNet Aus is one of many 

Reference Networks around the world 

powered by Leica- Geosystems’ Spider 

software. 

For more information, visit 

www.smartnetaus.com.au or contact 

your closest C.R.Kennedy office. 

South Australian Coverage 

S/E Queensland and 

Northern New South Wales 

14 


Leica HDS 

For any project, it makes sense to deploy the right tools. For 

as-built, topographic, detail, and engineering surveys, Leica 

High-Definition Surveying (HDS) systems are the way to 

go. Leica’s HDS hardware and software captures, visualies 

and processes 3D spatial data through the employment of 

advanced laser scanning technologies. 

HDS6200 LG6000534 

The Leica HDS6200 features several 

major “next generation” advances that 

increase the versatility, portability, 

and productivity of ultra high-speed, 

phase-based laser scanning for many 

plant, architectural and heritage as-built 

survey applications. 

It has a compact design with scanner, 

scan control panel, data storage, and 

battery integrated into a single, easy-tocarry 

unit. Features include: 

- 79m range 

- Three scanner control options: 

integrated side panel, wireless PDA, 

or full laptop control 

- Higher accuracy for each single point 

measurement and greater precision 

- High scan density 

- Extended temperature range 

Leica Scanstation C10 LG6003155 

Today’s most popular class of laser 

scanner, ScanStation, is now in a 

compact, all-in-one C10 platform. It 

includes scanner, tilt sensor, battery, 

controller, data storage, autoadjusting 

video camera and laser 

plummet. The C10 also features major 

productivity advances, including a 

new Smart X-Mirror that lets users 

conduct full-dome scans in literally 

just minutes using a spinning mirror. 

With outstanding performance 

for site, exterior, and interior 

applications, ScanStation C10 makes 

High-Definition Surveying (HDS) 

profitable for even more as-built, 

topographic and monitoring surveys. 

The ScanStation C10 platform 

represents the most capabilities 

and best value packed into a single 

laser scanner instrument. Users can 

take advantage of surveyor-friendly, 

onboard total station-like control or 

use an external laptop for even more 

powerful, onsite viewing and data 

processing. 

- 300 m range. 

- Full 360º x 270º field-of-view 

- Scans at 50,000 points per second. 

- Compatability with existing Leica 

GNSS sensors. 

- Integrated high resolution camera 

for texture mapping point clouds. 


3D Scanning 

Riegl 

Riegl 

VZ-400 - Medium Range 

The V-Line 3D Terrestrial Laser 

Scanner RIEGL VZ-400 provides high 

speed, non-contact data acquisition 

using a narrow infrared laser beam 

and a fast scanning mechanism up 

to 600m away. High-accuracy laser 

ranging is based upon RIEGL’s unique 

echo digitization and online waveform 

processing, which allows achieving 

superior measurement capability even 

under adverse atmospheric conditions 

and the evaluation of multiple target 

echoes. The line scanning mechanism 

is based upon a fast rotating multifacet 

polygonal mirror, which provides 

fully linear, unidirectional and parallel 

scan lines. 

The RIEGL VZ-400 is a very compact 

and lightweight surveying instrument, 

mountable in any orientation and even 

under limited space conditions. 

Riegl 

VMX-250 - Mobile Mapper 

Mobile Laser Scanning System 

for 3D data acquisition from 

moving platforms 

The new RIEGL VMX-250 is an 

extremely compact and user-friendly 

Mobile Laser Scanning (MLS) 

measurement unit. The roof-carrier 

mounted measuring head integrates 

two RIEGL VQ-250 scanners, inertial 

and satellite navigation hardware, and 

mounting points for digital cameras 

or video equipment. 

Fast 3D data collection, featuring 

high accuracy and high resolution, 

provides a basis for a variety of 

applications, like mapping of roadways 

and rail corridors (e.g. route inventory, 

noise protection, clearance gauge), 

waterways, ports, and harbors (e.g. 

river banks, jetties, cliffs) as well as 

extended urban and vacant areas. 

VZ-1000 - Long Range 

The V-Line 3D Terrestrial Laser Scanner 

RIEGL VZ-1000 provides high speed, noncontact 

data acquisition for ranges up 

to 1200 m using a narrow infrared laser 

beam and a fast scanning mechanism. 

High-accuracy laser ranging is based 

upon RIEGL’s unique echo digitization 

and online waveform processing, 

which allows achieving superior 

measurement capability even under 

adverse atmospheric conditions and the 

evaluation of multiple target echoes. The 

line scanning mechanism is based upon 

a fast rotating multi-facet polygonal 

mirror, which provides fully linear, 

unidirectional and parallel scan lines. 

The RIEGL VZ-1000 is a very compact 

and lightweight surveying instrument, 

mountable in any orientation and even 

under limited space conditions. 

16 

Main Features 

- Very long range up to 1200 m 

- Very high speed data acquisition 

- Wide field-of-view, controllable while 

scanning 

- High-accuracy, high-precision ranging 

based on echo digitization and 

online waveform processing 

- Multiple target capability 

- Superior measurement capability in 

adverse atmospheric conditions 

- High-precision mounting pads for 

optional digital camera 

- Integrated inclination sensors, laser 

plummet, and compass 

- Integrated GPS receiver with 

antenna 

- Various interfaces 

(LAN, WLAN, USB 2.0) 

- Internal data storage capability 

Main Applications 

- Topography & Mining 

- Archaeology & Cultural Heritage 

- As-Built Surveying 

- Monitoring 


Main Features 

- Very high speed data acquisition 

- Wide field-of-view, controllable while 

scanning 

- High-accuracy, high-precision ranging 

based on echo digitization and 

online waveform processing 

- Multiple target capability 

- Superior measurement capability in 

adverse atmospheric conditions 

- High-precision mounting pads for 

optional digital camera 

- Integrated inclination sensors and 

laser plummet 

- Integrated GPS receiver with 

antenna 

- Various interfaces 

(LAN, WLAN, USB 2.0) 

- Internal data storage capability 

Main Applications 

- Architecture & Facade Measurements 

- As-Built Surveying 

- Archaeology & Cultural Heritage 

- City Modelling 

- Tunnel Surveying 

- Civil Engineering 

Optech 

CMS-V400 

Optech’s CMS Cavity Monitoring 

System is the ideal scanning solution 

for dangerous and inaccessible 

cavities. With wireless control using 

the included Netpad handheld 

computer and an extendable boom 

system, the CMS can go deeper and 

farther than other scanning solutions, 

all while maintaining operator safety. 

The unit is fully programmable, 

allowing the user to define scan 

parameters including elevation step, 

azimuth step and scan limits. 

CMS provides efficient and accurate 

measurements of voids and cavities in 

underground mines. It can be inserted 

through boreholes as narrow as 25 cm 

(10 inches).

Rail Alignment 

Amberg Technologies has been the 

leading provider of specialised rail 

and tunnel measurement systems 

for more than 25 years. A unique 

combination of industry knowledge 

and engineering expertise has 

produced innovative and flexible 

systems, based on practical designs 

and user-friendly software. With 

worldwide support and service, these 

railway surveying solutions have won 

the trust and respect of both the rail 

and tunnelling industry. 

GRP1000 

Fast and accurate rail surveying, 

construction and tamping 

Can be geo-referenced with Leica total 

station or GPS/GNSS 

Software modules: 

- Amberg Survey Basic 

- Amberg Slabtrack Plus 

- Amberg Tamping Plus 

GRP3000 

Clearance measurements in 2D or 3D 

to bridges, tunnels and platforms 

Software module: 

- Amberg Clearance Basic 

GRP5000 

Clearance measurement and asset 

capture using laser scanning 

Software module: 

- Amberg Clearance Plus 


Underground Service Locators 

With the DIGISYSTEM 

operators can locate, trace 

and mark underground 

services quickly, precisely 

and reliably prior to 

excavation. 

It can be used for metallic 

pipes, power / data cables, 

and plastic piping or conduit. 

The DIGISYSTEM takes the 

guess work out of underground 

digging, whilst increasing 

productivity and safety. Buried 

service location has never been 

so easy. 

Digicat 100 (#LG731047) 

The DIGICAT 100 unit is designed to 

help avoid damage to underground 

services during excavation and is 

an easy to operate, fully automatic 

location system with the ability to 

manually tune if preferred. 

Digicat 550i (#LG780231) 

The Digicat 550i extends the depth 

of the Digicat 100 to 3m. When used 

with the DIGITEX 8/33 (operating in 

the 33kHz mode) the real depth and 

location of all services can be found. 

Available in two display formats, 

offering depth estimation to 3m and 

an accuracy of 10%. 

With its automatic controls and 

combined detection mode “Auto 

Mode” the Digicat 550i locator has 

been specifically designed to reduce 

human error during the location 

process. Combined with its precise 

and reliable service positioning, the 

Digicat 550i will prevent damage 

to underground services during 

excavation projects. Active signal 

tracing is available when using the 

Digitex 8/33 signal generator. 

DIGITEX 8/33 Signal Generator & 

Digitrace (#LG731049) 

Designed in conjunction with the 

DIGICAT locator, to easily and 

accurately trace the route of, or 

locate, an underground cable or metal 

pipe that does not carry a naturally 

present signal. The DIGITEX generates 

a specific “active” signal, which can 

then be traced using the DIGICAT. The 

Digitrace cable comes in 30m, 50m 

and 80m models. 

Accessories 

Digicat carry bag #LG740307 

DigiMouse point radiator 

#LG731053 

Digitrace 30m/50m/80m 

(#LG731050 / LG731051 / LG731052) 

The Digitrace is connected into the 

Digitex 8/33, and fed into non-metallic 

pipes or conduits. The Digicat 550i and 

200 are used to detect the location of 

the Digitrace. The Digitrace is available 

in 30m, 50m or 80m lengths. 

Property Connection Set #LG731670 

Signal Clamp (100mm diamter) #LG731056 

CST 19-550 MAGNA 

TRAK 100 (#530550) 

LCD indicator offers a digital 

bar graph display, plus 

standard audio tone, to 

precisely identify the 

target object. Locate ferrous objects 

under ground, under snow, or in water. 

CST 19-202SC MAGNA TRAK 

202 (#530558) 

Same as above but with erase 

function: lets you block out 

interference from a magnetic 

disturbance (such as a nearby fence). 

18 


Machine Control Digging Solutions 

We stock a complete range 

of products to suit any 

excavators, from less than 

one tonne to more than 

50 tonnes. 

EZIDig Wireless pack 

(# LG763702) 

The world’s first excavator mounted 

buried service locators. Take the 

guesswork out of digging, increase 

asset protection, increase safety, and 

increase productivity. 

The EZIDig mounts onto the stick 

of the excavator magnetically, and 

delivers real time warnings to a 

display mounted in the cab. The 

EZIDig can also plug directly into the 

Mikrofyn XC-2 or the Leica MC300 2D 

excavator systems, and can be used in 

conjuction with the Leica Digitex 8/33. 

CST LD-500 (# 53LD500) 

This sensor is ideal for mini 

excavators, bobcats, or backhoes. 

It can be mounted via magnets or 

brackets, It has a 240° acceptance 

angle, and indicates plumb via audio 

or LED. It can be used as either a 

hand receiver or a machine sensor, 

operates on 2 x AA batteries, and will 

detect most lasers. 

MC200 Depthmaster 

(# LG742440) 

This laser sensor is a quick and easy 

height detection sensor for excavators. 

Built tough, it can withstand highly 

demanding jobs. It’s mounted on the 

stick via magnets or brackets, and 

with constant accuracy band control 

and patented plumb indicators, 

indicates plumb via ultra bright LED 

displays on the front and back. It has 

a self contained rechargeable battery 

pack, is 100% waterproof, and detects 

a large range of lasers. 

Mikrofyn MD-40 

#M1114501 

- 32cm receiver height. 

- Accuracy of ±5mm. 

- Captures 360 degree angles. 

- Working diameter of up to 1000m 

with Mikrofyn Lasers. 

- Works with all types of lasers. 

- Shock and water proof to IP68. 

- Military spec connectors. 

- Easy to install with quick clamp. 


Machine Control Digging Solutions 

PowerDigger 2D Panel 

Trenching, Layering 

and Fixed Depth 

Enter the desired 

depth and slope and 

PowerDigger Plus will 

guide the operator in 

digging fixed depth. 

Dual Slope Option 

The heading of the 

machine and the tilt of 

the bucket are clearly 

shown on the screen. 

Slopes, Grades, 

and Profiles 

Creating embankments 

and other single 

grades, just enter the 

desired slope and the 

system guides you. 

Height/Depth Detection 

PowerDigger Plus 

allows operators to 

set a height or depth 

alarm that alerts them 

if they exceed defined 

limits. 

Precision Jobs – 

Laser Mode Option 

Integrate PowerDigger 

Plus with a rotating 

laser to provide a 

precision reference 

height and slope. 

Blind Cuts 

Work faster and safe 

on blind cuts or 

underwater with the 

PowerDigger Plus 

graphical display. 

Leica PowerDigger 2D 

PowerDigger Plus provides excavator 

operators with real-time depth, slope 

and reach information, in relation to any 

reference, on an easy-to-read graphical 

display control panel mounted in the cab. 

PowerDigger Plus gives you the 

real-time information you need to 

increase the productivity of your 

machine by up to 50%. It’s a reliable 

and flexible guidance solution that 

you can expand on to meet your 

future needs. 

Benefits 

– Accurate digging exactly to your 

planned profile 

– Reduces or elimates grade checking 

– New LMB300 Remote Display 

supported 

– Interface to EZiDIG Buried Service 

Detector 

– Selectable Bucket Reference point 

– Reach measurement always displayed 

on the screen; no manual checking 

any more 

– Digging under water with full guidance 

– Easy vertical positioning of sheet piles 

with the new PowerDriller function 

PowerDigger Plus Features 

– Most accurate system on the 

market – 1 cm (0.5“) or 0.2% 

of the reach 

– Fits any machine ranging from 

1 to 600 plus tons, dual booms 

or long reach machines with 

areach of more than 25 m (80’) 

– 4” Colour Graphic display 

– Simple menu structure, very easy 

to use 

– Remote display supported 

– Holds 20 different bucket settings 

– 100 % waterproof (IP68) – 

no special sensors or cables 

needed for underwater use 

– Upgradeable from single grade 

to dual grade and 3D guidance 

– Upgrade with tilt bucket sensor 

– Bucket sensor can be mounted 

on the dog bone 

– Selectable bucket reference point 

– Often used function keys can be 

activated from the joystick 

– Interface to EZiDIG Buried 

Services Detector 

– New PowerDriller function for easy 

vertical positioning of sheet piles 

or drilling 

PowerDigger Lite Panel 

Leica PowerDigger Lite 

Designed for mini excavators and 

backhoes 5 tonnes and down, the 

PowerDigger Lite is the new standard in 

entry level machine control. Ideal for 

foundations, embankments, pipe 

trenches, grading, and even for 

underwater work. The bucket’s position is 

displayed relative to a target grade on 

the display. By eliminating overexcavation, 

and working faster, 

contractors will save time, money, fuel 

and materials costs. 

Safety Features of PowerDigger Lite 

Leica PowerDigger Lite also removes the 

need for grade checking, increasing safety 

on busy construction sites. Additionally, 

when working in potentially dangerous 

areas, e.g. under bridges and power lines 

or inside buildings, the operator can 

preset a maximum working height or 

depth, and be warned when the 

excavator arm or bucket reaches the 

critical height. Leica PowerDigger Lite also 

features the unique integrated buried 

service detection warning. An EZiDIG 

cable detection sensor can be interfaced 

directly to the PowerDigger CAN 

connection. The operator will be alerted 

of buried services while digging by an 

audio alarm and a multi-level bar on the 

PowerDigger Lite display. 

20 


Machine Control Grading Solutions 

Leica PowerGrade can dramatically increase machine 

utilisation, productivity and optimise material usage on any 

earthmoving and fine-grading contract. It can be used with a 

wide range of sensors and combines ease-of-use, unrivalled 

flexibility with very powerful and intuitive user interface. 

Leica PowerBlade 

The Leica PowerBlade system is a 

complete solution steered by the 

MCP-700 Control Box – easy-touse 

and full of features. A choice of 

Laser Receivers allows you to tailor 

the system to your application. An 

extremely rugged Electric Mast and 

a variety of hydraulic options 

complete the system. 

All components have 

been developed to 

meet the extra strain 

experienced on Dozers 

and agricultural 

Tractors. The Leica 

PowerBlade system 

features a very rugged 

and durable design and 

is up to any challenge. 

Leica Power Grade 

Leica PowerGrade will revolutionise 

your construction process. It not 

only boosts your productivity and 

performance, it also offers unmatched 

flexibility and upgradeability. 

Leica PowerGrade can dramatically 

increase machine utilisation, productivity 

and optimise material usage on any 

earthmoving and fine-grading contract. 

It can be used with a wide range of 

sensors and combines ease-of-use, 

unrivalled flexibility with very powerful 

and intuitive user interface. 

The key to the Leica PowerGrade system 

lies in our unique PowerSnap concept 

– a single docking station allowing easy 

and quick exchange of panels, 

depending on the job you need to do. 

Just snap the control panel into place 

and get to work. 

Leica Power Grade 3D 

Leica PowerGrade 3D will revolutionize 

the way you move dirt and fine-grade. 

It not only boosts your productivity 

and performance, it also offers 

unmatched flexibility. 

Leica PowerGrade 3D can dramatically 

increase machine utilisation, productivity 

and optimise material usage on any 

earthmoving and fine-grading contract. It 

can be used with a wide range of 

sensors and combines ease-of-use, 

unrivalled flexibility with intuitive and 

powerful software. 

The key to the Leica PowerGrade system 

lies in our unique PowerSnap concept 

– a single docking station allowing easy 

and quick exchange of panels, 

depending on the job you need to do. 

Simply swap the 2D with the 3D panel or 

even transfer the panels between 

machines. Just snap the control panel 

into place and get to work. 


Machine Control Paving Solutions 

Eliminate the need for 

string lines and increase 

productivity with Leica’s 

range of paving solutions. 

Basic Paving System 

Works as stand-alone using ultrasound, 

laser, or system or with lasers, complete 

system with Cross slope, CAN Bus 

System and expandable to Leica 3D 

solutions. 

PaveSmart 3D for curbs & 

gutters, milling, slipformers, 

and final grade trimmers. 

Leica Geosystems’ PaveSmart 3D for Curb 

& Gutter eliminates the need to set 

stringline for any kind of offset concrete 

paving application and gives you total 

jobsite flexibility and mobility. Fully 

automatic grade and steer control using 

3D sensor technology means you can 

pave exactly where and when you want 

to, not where you’re forced to. Free 

yourself up from the cost and 

inflexibility of strings, stakes & hubs. 

PaveSmart 3D for asphalt pavers 

– Leica PaveSmart 3D uses 

computerised project design files, 

straight from the architect’s CAD 

system 

– Eliminates the cost, potential for 

errors and logistical problems with 

setting and checking lines and 

removing it all after paving 

– Hundreds of projects – anything from 

simple one-off jobs to complex 

subdivisions – can be stored in one 

system 

– Full 3D graphics allow you to see 

where you are, where you’re going, 

and verify there are no problems with 

the project design before you pave 

– Bid lower than your stringline-based 

competitors and win more contracts 

22 


Machine Control RedLine 

Leica RedLine 

The Leica RedLine series has 

been designed from the ground 

up to work perfectly with 

Leica’s machine control range of 

products. From office to field and 

back again, the new RedlLine 

product range has the perfect 

solution for all your construction 

site design and positioning 

needs: The unique modular 

system design allows the same 

sensors to be used across the 

entire construction site. 

Leica PowerTracker 

Leica PowerTracker is a highly 

accurate robotic tracking sensor, 

which is the perfect tool for all your 

construction positioning needs. From 

stakeout, to machine control, to asbuilt 

verification Leica PowerTracker 

is the ideal sensor to get the job 

done right the first time. Designed 

specifically with the construction site 

and the construction user in mind, 

simply level the Leica PowerTracker 

and GO. With no keyboard on the 

sensor and an extremely intuitive user 

interface, all users will be up and 

running in no time. 

Leica PowerAntenna 

Leica PowerAntenna is the world’s 

first system that uses the same 

components for on- and off-machine 

applications. Combine it with the Leica 

PowerBox to boost productivity of your 

excavator with dual GNSS positions, 

move it on a pole for staking out or 

checking as-builts while the excavator 

continues in single GNSS operation, 

or use it as a base station that site 

personnel easily can set-up. The 

scalable design allows you tailor the 

system precisely to your needs. 

Leica PowerBox 

Leica PowerBox is designed to exceed 

the needs of the toughest machine 

control applications. Vibration, 

dirt, dust, rain or snow can not 

stop the Leica PowerBox providing 

high accuracy uninterrupted data. 

Combine Leica PowerBox with Leica 

PowerAntenna for a unique dual GNSS 

control solution for use on excavators. 

Use the same components for all offmachine 

applications, such as base 

station, pole or site supervisor vehicle 

solutions. Leica PowerBox is a scalable 

position system, that can grow with 

your need. GLONASS, Networking, 

update rate and base station use, can 

all be configured to provide a tailored 

solution for your needs. 

Leica PowerController 

The PowerController is the first tool 

that allows all construction site staff 

access to digital design. It can display 

design files from the project engineers 

anywhere on site. Running Windows 

CE, it has removable CF card slot for 

easy data transfer or extended data 

storage. The simple user interface 

allows non-specialists to set-up GPS/ 

GNSS base stations or total stations 

with ease. 


Disto 

The new Leica Disto range is the most advanced range 

of hand held laser distance meters in the world. All Disto 

models are accurate to within ±1mm, and come with a 

3 year international warranty. 

Disto D2 (#LG762200) 

Measure distances up to 60m with 

the smallest laser distance meter 

in the world. 

Disto DXT (#LG774697) 

The only laser distance meter, which 

is protected against jet water and is 

absolutely tight against dust. Shock 

proof to a 2m drop. 

Disto D3A (#LG776148) 

The large, illuminated screen ensures 

information is read clearly and easily. 

Smart Horizontal mode allows you 

to determine horizontally distance 

precisely. 

Disto D3A BT (#LG776747) 

All the benefits of the D3A, with the 

ability to transfer data wirelessly to a 

Bluetooth enabled PC or Pocket PC. 

Disto D5 (#LG764550) 

Large colour screen, digital view 

finder, and tilt sensor in one. 

Disto D8 (#LG764555) 

The most versatile laser distance 

meter in the world! Equipped with 

a large colour display, digital view 

finder, tilt sensor and Bluetooth, 

this model will perform for the most 

demanding users. 

Model Range Tilt Sensor Bluetooth Viewfinder 

Disto D2 60M NO NO NO 

Disto DXT 70M NO NO NO 

Disto D3A 100M YES ±± 45° NO NO 

Disto D3A BT 100M YES ±± 45° YES NO 

Disto D5 200M YES ±± 45° NO YES 

Disto D8 200M YES 360° YES YES 

24 


Disto Accessories 

LG723385 

Disto GZM26 target plate (flat A4 size) 

LG723774 

Disto GZM27 target plate (Plus section) 

LG723777 

Leica Disto Laser glasses 

LG723774 

Leica TRI-100 Tripod 

LG723385 

Disto GZM26 target plact (flat A4 size) 

SupaRule 600E #7090015 

The SupaRule cable height meter is 

a handheld meter for measurements 

of cable sag, height, and overhead 

clearance. It is a modern alternative 

to telescopic measuring poles. Using 

ultrasonic signals, it can determine 

the height of up to 6 cables 

simultaneously, up to a height of 23m. 

Item number 

Description 

HX2110 

HP IPAC 2110 - Pocket PC for Bluetooth measurements 

70667478 Disto Telescopic viewer & adapter plate 

LG723777 

Leica Disto Laser glasses 

LG723385 

Disto GZM26 target plate (flat A4 size) 

LG723774 

Disto GZM27 target plate (Plus section) 

SLKF630 

SLIK Tripod for Disto/ Lino 

LG723774 

Disto TRI-100 TRIPOD, Fine adjustment 

LG769459 

Disto LSA360 adapter for pole or tripod 

LG766560 

Disto Plastic target plate. 197mm X 274mm 

LG667169 

Disto soft carry case 


Agatec Laser Levels 

Agatec lasers have a range of low cost, high quality lasers in red 

and green beam. All Agatec lasers come with a 2 year warranty. 

A110 A510 / A510G M10 

Rotating Lasers 

Item Number Model Laser Levelling Vertical Plumb Interior/Exterior Batteries 

8000-0134-10 A110 Red Auto Yes Yes Int Alkaline 

8000-0083-11 A510S Red Auto Yes Yes Int/Ext NiCad 

AG775200 A510G Green Auto Yes Yes Int/Ext NiCad 

1110127 M10 Red Manual No No Int/Ext Alkaline 

AG781034 RL110G Green Auto No Yes Int/Ext Alkaline 

Receivers 

Item Number Model Remote 

2730-0046-11 SR200 No 

2730-0045-11 RC500 Yes 

AG775872 RC500G Yes 

AG775210 SmartRod No 

SmartRod #AG775210 

- All-in-one: laser receiver, rod, 

digital measuring tape. 

- Automatically calculates 

cut-and-fill. 

- Makes work quicker and easier. 

26 


Leica Lino Laser Levels 

With Leica Linos everything is plumb and perfectly aligned. They 

project lines and points to millimeter accuracy, leaving your hands 

free to get on with the job. All Linos have a 3 year warranty. 

Lino L2 

Range - 15m, 30m with detector 

Accuracy @ 5m - ± 1.5 mm 

Self levelling - 4° ± 0.5° 

Protection - IP54 

Locking switch for laser module. 

Leica Lino Lasers 

Lino L2P5 






Lino P5 






Item Number Model Description Accessories 

LG757225 Lino L2 Cross line laser Soft carry case, batteries, mini tripod, target, & magnetic wall mount 

LG777068 Lino P5 5 point vector Hard carry case, soft carry case, batteries, target, &magnetic bracket 

LG777069 Lino L2P5 5 point and cross line laser Hard carry case, soft carry case, batteries, target, &magnetic bracket 

LG770882 L2 D2 Kit Lino L2 + Disto D2 Kit Hard carry case, target, batteries, disto case 

Accessories 

Item Number 

LG723777 

LG758448 

LG757938 

LG758832 

LG758839 

LG761762 

LG764165 

Model 

Laser Glasses 

LL2 - Laser Receiver 

Tripod 

Mini Tripod 

Wall bracket 

CLR-290 Ceiling Pole 

Bracket for LL2 Receiver 

LL2 - Laser Receiver 

#LG758448 

LL2 Laser Receiver for 

Lino L2P5 or Lino L2. 


Leica Laser Levels 

Rugby range 

Roteo 35 

The Leica Roteo and Rugby range of lasers are the most 

comprehensive line of lasers on the market. Whether you need 

a laser for machine control grading, concreting, pipe laying, 

indoor fitouts, etc, Leica have the right laser for your job. 

Rotating Lasers 

Model Roteo 35G Rugby 50 Rugby 55 Rugby 100 Rugby 100LR Rugby 200 

Diameter 300m 300m 300m 400m 750m 300m 

Grade No No No Single ±10% Single ±10% Single 

Accuracy at 30mm ±1.5mm ±2.6mm ±2.6mm ±1.5mm ±1.5mm ±1.5mm 

Veritcal Yes No Yes No No Yes 

Plumb laser Yes No up No No up / down 

Laser class 3R (Green) 2 2 2 2 2 

Visible beam Yes No Yes Yes No Yes 

Manual grade No No Yes Yes Yes Yes 

Dial in grade No No No No No No 

Battery Life (Alk) 160 hours 50 hours 50 hours 60 hours 60 hours 50 hours 

Motorised Wall mount Yes No No No No No 

Interior / Exterior Interior Exterioir Interior Exterioir Exterioir Interior 

Warranty 3 years 2 years 2 years 2 years 2 years 2 years 

Wall bracket Yes Optional Optional Optional Optional Yes 

Remote Control Yes Optional Optional 

Spotting Scope 

Model Rugby 260 Rugby 270 Rugby 280 Rugby 320SG Rugby 410DG Rugby 420DG 

Diameter 600m 700m 700m 900m 1,100m 1,100m 

Grade Single ±10% Single ±15% Dual ±15% Single -5 to +25% Dual -5 to +25% Dual -5 to +25% 

Accuracy at 30mm ±1.5mm ±1.5mm ±1.5mm ±1.6mm ±1.6mm ±1.6mm 

Veritcal No No No No No No 

Plumb laser No No Up Up Up Up 

Laser class 2 2 3 3 3 3 

Visible beam Yes Yes Yes Yes No Yes 

Manual grade Yes Yes Yes Yes Yes Yes 

Dial in grade Yes Yes Yes Yes Yes Yes 

Battery Life (Alk) 70 hours 70 hours 70 hours 130 hours 130 hours 130 hours 

Motorised Wall mount No No No No No No 

Interior / Exterior Exterioir Exterioir Exterioir Exterioir Exterioir Exterioir 

Warranty 2 years 2 years 2 years 2 years 2 years 2 years 

Wall bracket 

Remote Control Yes Optional Optional Optional 

Spotting Scope Optional Optional Optional 

28 


Leica Laser Levels 

The ROD-EYE Family of sensors offers solutions for any general 

construction and interior application, and are ideally matched to 

work with the RUGBY family of lasers. 

ROD Eye Basic ROD Eye Plus ROD Eye Digital 

RRFC350 - Roteo remote 

control and receiver 

RRFC350 - Roteo remote 

control and receiver for 

green beam. 

Leica Receivers 

Model Basic Plus Digital RRFC350 RRFC350 

Item Number LG769811 LG769810 LG769809 LG762771 LG762771 

Accuracy ± 1 mm ± 1 mm ± 0.5 mm ± 1 mm ± 1 mm 

Battery life 50 hours 70+ hours 60+ hours 50 hours 50 hours 

Radius 150m 450m 450m 150m 150m 

Display channels 5 9 21 5 5 

Height reading No No Yes No No 

Red, Green, Blue LED No Yes Yes No No 

Anti strobe No Yes Yes No No 

Memory No Yes Yes No No 

Beam finder No Yes Yes No No 

Low laser battery indicator No Yes Yes No No 

Front and Rear LCD Yes Yes Yes Yes Yes 

Warranty 1 year 2 years 2 years 1 year 1 year 

Leica Accessories 

Item number Description Compatible with 

LG761762 CRP290 Ceiling Pole All 

LG739870 Scope and mounting assembly 320, 410, 420 

LG755008 IR Remote Control 55 

LG731645 RF Remote Control 200 



LG762770 RC350 Wireless remote control All Roteo 

LG733073 Wall mount bracket Rugby 50,55,100,200 

LG732791 Ceiling grid target All 

300400 12 V cable 320, 410, 420 

LG726747 Alk battery base 100, 100LR, 200 

LG752049 NiMH Battery 50, 55 

LG726746 NiMH Battery 100, 100LR, 200, 260, 270, 280 

LG739855 NiMH Battery 320, 410, 420 

LG741349 NiMH Charger 320, 410, 420 

LG727165 NiMH Charger 50, 55, 100, 100LR, 200, 260, 270, 280 


Mikrofyn Laser Levels 

Built from the same material used in crash helmets, and 

waterproof to IP68, the new range of Mikrofyn lasers are tough 

and durable, work with Makita 7.2V batteries, and come with a 

2 year warranty. All lasers come with a hard carry case, receiver, 

laser glasses, battery and charger. Battery charging time is fast; 

only 1 hour for 20 hours of use. 

Mikrofyn ML-10 

#M1080504 


#M1081501 


#M1083504 


#M1084511 

Mikrofyn HS-10 receiver 

#M1144501 

Model ML-10 ML-11 ML-13 ML-14 

Item Number M1080504 M1081501 M1083504 M1084511 

Diameter 300m 300m 300m 300m 

Accuracy at 30mm ±1.5mm ±1.5mm ±1.5mm ±1.5mm 

Grade - Single 10% Dual 10% Dual 10% 

Self Levelling ±5° ±5° ±5° ±5° 

Vertical No No No Yes 

Plumb laser - - Yes Yes 

Laser class 2 2 2 2 

Visible beam No No Yes Yes 

Dial in grade No Yes Yes Yes 

Battery Life (Alk) 20 hours 20 hours 20 hours 20 hours 

Interior / Exterior Ext Ext Ext Int & Ext 

Warranty 2 years 2 years 2 years 2 years 

Wall bracket No No No Yes 

Receiver HS-10 HS-10 HS-10 HS-14 

Battery Makita 7.2V Makita 7.2V Makita 7.2V Makita 7.2V 

Wall mount Optional Optional Optional Included 

30 


Tuf Laser Levels 

Tuf Lasers offers a range of lasers at an unbeatable price. 

All Tuf Lasers come with a 1 year warranty. 

5 Pointer 

#LP105 

5 point vector laser. 

X-Line 

#LS636 

1 vertical laser, and 360 degree 

horizontal laser. 

X-Line + 5 

#LP106 

1 cross line, and 5 point laser in one. 

M-Line 

#MCL4V3H 

4 vertical, 360 degree horizontal laser, 

and plumb dot laser. 

H1 

#FRE205 

Horizontal rotating laser. Comes 

complete with receiver, remote 

control, glasses and carry case. 

HVG 

#RHVP500G 

Rotating green beam laser. Comes 

complete with receiver, remote control, 

glasses, wall mount bracket and carry 

case. 

Accessories 

Tuf Cross Line 

#TUFXLINE2P 

Horizontal and vertical cross line laser 

with plumb up and plumb down. 

Item Number 

WM-3B 

FRA-1 

TUFTARGETR 

TUFTARGETG 

Description 

Wall mount bracket 

Tripod spacer for M-Line 

Tuf Laser Target - Red 

Tuf Laser Target - Green 


Pipe Lasers 

The world’s smallest pipe laser. 

Leica Piper 100 (# LG748704) and Piper 200 (# LG748710) 

The Leica Piper series of pipe lasers 

are perfect for storm and sanitary 

sewer construction, gravity flow pipe 

line and anywhere grade and line are 

required with a single beam. 

Built with rugged alumiumn housing, 

Piper lasers perform exceptionally well 

in the toughest conditions. The Piper 

is the only laser piper laser in the 

world that fits inside a 100mm 

(4 inch) pipe, making it the perfect 

tool for road crossings or tight 

culverts. 

Alignmaster is Leica patented 

technology in the Piper 200. 

The laser searches and finds the 

target for quick second day setups. 

Model Piper 100 Piper 200 

Beam Highly visible red beam Highly visible red beam 

Display Large, easy to read LCD display Large, easy to read LCD display 

Alignmaster No Yes 

Line and Grade Locks Yes Yes 

Wide Line Adjustment Yes Yes 

Self-leveling -15 % to +30 % -15 % to +30 % 

Grade Range -10 % to +25 % -10 % to +25 % 

Grade entry Direct or by digit Direct or by digit 

Working Range 200m 200m 

Remote control Yes, wireless Yes, wireless 

Housing Rock solid metal Rock solid metal 

Battery pack Rechargeable Lithium-Ion Rechargeable Lithium-Ion 

Waterproof 100% 100% 

Mikrofyn MLP-120 (# M1072531) 

The Mikrofyn MLP-120 pipe laser is 

designed to function under all jobsite 

conditions. It is manufactured using 

first class materials to provide 

contractors a rugged, reliable and 

easy-to-use instrument. Built to be 

strong and job-site tough. 

The round all aluminum housing 

insures perfect sealing plus provides 

a rugged protection enclosure for the 

mechanics, optics and electronics of 

the MLP 120 C. MLP 120 C is rated to 

a depth of 9m (30’) head of water. 

– Simple to use control panel 

– Small size - 120x270mm (4 3/4” x 

10 2/3”) 

– Large grade range -15% to 50% 

– Full self-leveling range - no tilting 

required 

– Large cross axis compensation 

range ±10% 

– Internal self calibrating technology 

– High quality bright beam 

– Low cost off-the-shelf rechargeable 

battery 

– 1-Hour charging system 

– Easy to remove handle/clamp 

with tripod mount 

– Heavy duty waterproof 

carrying case 

– Complete range of accessories 

– Totally water proof (9m/30’ head 

of water) 

The Pipe Laying Laser is delivered in 

a sturdy waterproof carrying case. 

32 


Digital Spirit Levels 

DigiPas 

Digipas units are the quick and 

accurate way of measuring angles. 

All are made of a strong ABS polymer 

with an aluminium base and built in 

magnet. All have a crisp LCD to 

display angles in degrees and 

percentage slopes. Calibration can 

be performed by the user very quickly. 

Model DWL-80 Pro DWL-180 DWL-280 

Range 0° to ±90° 0° to ±90° 0° to ±90° 

Resolution 0.05° 0.1° 0.1° 

Accuracy ±0.05° ±0.2° ±0.2° 

L x W x H (mm) 107 x 55 x 18 95 x 48 x 22 200 x 43 x 18 

DWL-180 - #519698 

Turns a bubble spirit level into a 

digital spirit level. 

DWL-280 Torpedo - #519699 

Torpedo digital level. 

DWL-80 Pro - #519697 

Pocket digital mini level. 

Smart Tool 20cm Module – 

#519752 

Smart Tool 120cm – #519751 

SmartTool – The original 

digital spirit level 

SmartTool is the industry standard 

digital level. Extremely durable and 

easy to calibrate, it will keep its 

accuracy for years. 

Features include: 

– Digital display with backlight. 

– 1mm accuracy per meter. 

– Display in degrees, inches/feet, 

or percent. 

– Hold button to retain measured 

value. 

– Audible beep at level or plumb. 

– Very strong railing. 

– Easy to calibrate. 

– 9V battery included. 

Magnetic bracket for Smart 

Tool Module - #519769 

Smart Tool cover 

60cm – #7130750 

Smart Tool cover 

120cm – #7130751 

Smart Tool 60cm – #519750 

Smart Tool 60cm with laser – 

#519754 


Survey Accessories – Batteries 

The batteries available from Leica Geosystems are of the highest 

quality in respect of temperature tolerance, recharging capability, 

operating time and cycle behaviour. 

GEB111 GEB121 GEB187 

GEB211 GEB212 GEB221 

GEB241 

GEB77 

Leica Batteries 

Item Number LG754834 LG733720 LG772806 LG733269 LG667123 LG667318 LG667147 

Model Number GEB241 GEB221 GEB212 GEB211 GEB121 GEB111 GEB187 

Chemistry Li-Ion Li-Ion Li-Ion Li-Ion NiMH NiMH NiMH 

Output 14.8 V / 4.8Ah 7.4V / 4.4Ah 7.4V / 2.6Ah 7.4V / 2.6Ah 6V / 4.2Ah 6V / 2.1Ah 12 V / 1.8Ah 

Instrument TMS30 / TS30 System 1200, 

Flexline, GS10 

receiver, Piper 

GNSS receiver Field controller TPS400/700 

& Builder 

TPS400/800 

& DNA 

TPS1000 & 

TPS2000 

34 


Survey Accessories – Batteries 

GEB63 

#LG394792 

GEV208 

#LG749279 

GEV71 

#LG439038 

GEV186 

#LG734697 

GEB171 

#LG409667 

Leica Accessories 

Item Number LG727367 LG739279 LG439038 LG394792 LG749279 LG734697 

Model Number GEB171 GEV208 GEV71 GEB63 GEV208 GEV186 

Chemistry NiMH Mains 12V car battery 

Output 12V / 9Ah 12V / 9Ah 

Description External Battery Power Supply 12V cable Battery Box Power Supply Y-Cable RX/TCPS 

Toshiba Batteries – 2 pieces 

Item Number TSLR3SP TSLR6SP TSLR14SP TSLR20SP 

Model AAA AA C D 


Survey Accessories – Carriers 

Like all other Leica Geosystems accessories, Leica carriers 

distinguish themselves through outstanding quality features. 

The high precision carriers of the Professional 5000 Series offer 

you a choice between a carrier with laser plummet, or optical 

plummet and longitudinal bubble for high accuracy positioning. 

Professional 5000 carriers deliver an outstanding 0.3 mm 

centring accuracy, while the Professional 3000 Series offer a 

centring accuracy of 1.0 mm. 

SNLL121 #LG667316 

GRT144 #LG667313 

GRT146 #LG667216 

GRT247 #LG770715 

GZR3 #LG428340 GZR103 #LG725566 GZR2 #LG360532 

Item Number LG667316 LG667313 LG667216 LG770715 LG428340 LG725566 LG360532 

Model Number SNLL121 GRT144 GRT146 GRT247 GZR3 GZR103 GRZ2 

Plummet Laser Optical Optical None Optical Optical Optical 

Accuracy 0.3mm 1.0mm 1.0mm 1.0mm 0.3mm 1.0mm 0.3mm 

Bubble No No No No Yes Yes No 

Accessories 

Item Number LG667217 LG667244 

Model Number GAD31 GZS4 

Use 

Scew 

to Stub 

adapter 

Height 

hook 

36 


GAD31 # LG667217 

GZ4 # LG667244

Survey Accessories – Chargers 

Leica Geosystems chargers ensure the fastest recharging time 

and the longest life span of Leica batteries. 

GKL221 #LG733271 

GKL221 #LG734752 

GKL112 #LG734753 

GKL22 #LG636983 

Chargers 

Item Number LG733271 LG734752 LG734753 LG636983 

Model name GKL221 GKL211 GKL112 GKL22 

Battery Use adapter GEB211, GEB212, GEB211 GEB121, GEB111 5 pin batteries 

Number of batteries 5 1 1 1 

GDC221 #LG734389 GDI221 #LG733323 GDI222 #LG733322 

Adapters for GKL221 

Item Number LG733323 LG734389 LG733322 

Model name GDI221 GDC221 GDI222 

Battery GEB211, GEB212, GEB221, GEB241 GEB121, GEB111 

Type Adapter plate Car adapter cable Adapter plate 


Survey Accessories – Chartwell Field Books 

Chartwell field books are made to the highest specification 

using quality strength paper with high cotton content. 

They provide excellent tear resistance when wet. Strength 

and writing surface is retained when dried even after being 

subjected to extreme weather conditions. All books come with 

160 pages printed with permanent waterproof ink. Covers can 

be wiped clean, fold flat, and are sewn in sections with nylon 

thread to withstand the most demanding environments. 

Item number Model Description Size (w x h) Description 

92291 2291 Watershed - Notebook 156x101mm Ruled notebook, wire bound, waterproof, write underwater 

08207026 2226 Field Book 192x120mm Ruled notebook 

92126 2126 Field Book 106x205mm Ruled 2 red centre lines without feints 

92006 2006 Field Book 130x205mm Ruled 2 red centre lines without feints 

92026 2026 Field Book 130x205mm Ruled 2 red centre lines with blue feints. 

92106 2106 Traverse 106x205mm Ruled 2 red centre lines with blue feints. 

92206 2206 Traverse 106x165mm Ruled 2 red centre lines with blue feints. 

92056 2056 Graph paper 130x205mm 1/10" and 1/2" grey graph and 2 red centre lines. 

92416 2416 Levels: Rise & Fall 192x120mm For surveying with a level 

92426 2426 Levels: Collimation 192x120mm For collimating levels 

92557 2557 Tache Theodolite 192x120mm For use with a theodolite 

92567 2567 Tache auto redn 192x120mm For use with an automatic level 

92637 2637 Mining 5mm Graph 192x120mm Horizontally ruled pages opposite 5mm sqaure graph pages 

92647 2647 Mining 2mm Graph 192x120mm Horizontally ruled pages opposite 2mm sqaure graph pages 

38 


Survey Accessories – Compasses & Clinometers 

Silva is the leading manufacturer of compasses worldwide, 

starting in 1933 with the invention of the first liquid filled compass. 

The head office is situated north of Stockholm in Sweden. 

Silva Survey Master #7090278 

This instrument is a combination 

of the SightMaster compass and 

the ClinoMaster clinometers in one, 

allowing you to measure vertical 

angles to ±90° and compass bearings 

through site or on the dials. 

Silva CM360 Clinometer 

#7090271 

The CM360 allows you to measure 

vertical angles to ±90° through a lens 

or on the dial. 

Silva SM360 LA Compass 

#7090270 

The SM360 LA has a site and dial to 

measure accurate compass bearings. 

Silva Rubber Cover #7090250 

This rubber cover will protect the 

SM360 compass or the CM360 

clinometer. 

Leather pouch for CM360 

Clinometer #7090450 

Suited for the Silva Survey Master, 

this high quality leather pouch will 

protect the clinometer. 

Silva ADC Summit #7090263 

Functional wind gauge and altimeter. 

Collected data can be transferred to a 

PC using ADC IR (accessory). 

Functions include: 

- Wind gauge, max and average 

wind speed 

- Thermometer, Celsius or Fahrenheit 

- Altimeter, precise to 1 metre 

- Barometer, with 24 hours history 

- Clock with alarm 

- Stopwatch, with split times and 

countdown timer 


Survey Accessories – CST Accessories 

522010 522070 522521 

CST Tribach Adapters 

Item number 522010 522070 522521 

Model 61-2520 61-2525 61-2521 

Comments Fixed tribach adapter Rotating adapter Rotating friction adapter 

CST Adapter 

532513 

General Adapter 

532515 

Leica Mushroom 

526057 

Point & Hook 

531507 

Thread Adapters 

Item number 

Description 

532513 5/8" thread to leica male spiggot 

7050195 BRASS 5/8" thread to leica male spiggot 

532515 Leica spiggot female to 5/8" thread 

7050200 BRASS Leica spiggot female to 5/8" thread 

531507 5/8" thread to Leica 5/8" 

526057 Leica spiggot to mushroom 

7050199 BRASS Leica spiggot to 5/8" thread 

CST Plumb Bobs 

Item number 580009 580011 580010 580020 

Model 11-550 11551 11552 11554 

Comments Plum Bob 340g Plum Bob 400g Plum Bob 455g Plum Bob 680g 

CST Plumb Bob Accessories 

Item number 580035 580030 580025 580026 531507 

Model 11555A 11555B 11557 11558 651507 

Comments Plum Bob cap Plum Bob 

Point 

CST Gamon Reel 

Item number 526002 526001 

Model 11729 11730 

Comments 3.6m 2.1m 

Plumb Bob 

Pounch: 400g 

to 510g 

Plumb Bob 

Pouch: 680 - 

900g 

Plumb Bob 

Hook 

40 


Survey Accessories – CST Prisms 

#526053 

#526056 

#526052 

#531100, 580654 

#532010, 532012, 

532012M, 532010M 

#531010, 533011, 

532011S, 532011V 

#513512 

#526053 

Item number Model number Prism type Holder Comments 

513512 65-1512 Circular Canister Sealed in black anodized aluminum can. 

531100 63-2011 Circular Canister Hermetically sealed precision prism with 5/8" thread 

580654 63-4011 Circular Canister Precision prism with LED in centre. M20 thread 

533024 63-3024 Circular Canister Snap-In Leica style prism 

531010 63-1010 Circular Prism assembly Optima target back, metal assembly, with 5/8" thread 

532010M 63-2010M Circular Prism assembly Single tilt plastic assembly with metal yoke and 5/8" thread 

532012 63-2012 Circular Prism assembly Hermetically sealed. Plastic yoke 

532012M 63-2012M Circular Prism assembly Hermetically sealed with polycarbonate metal yoke and assembly 

526053 65-1505 Mini Prism assembly Plastic assembly with levelling bubble and 5/8" thread base 

526056 65-3500M Mini Prism assembly Leica style with spiggot base and bag included 

526052 65-1500M Mini Prism assembly "Peanut Pack" Leica style metal assembly with 5/8" thread, bag included 

533011 63-3011 Circular Canister Copper coated monitoring prism. Ideal for humid conditions 

532011V 63-2011V Circular Canister Hermetically sealed, Monitoring seconds prism 

532011S 63-2011S Circular Canister Seconds prism 


Survey Accessories – GME Radios 

GME is an Australian manufacture of high quality radio 

communcations equipment. The most popular UHF 

radio we sell is the TX650. We can source any GME 

model to suit your requirements. 

GME TX650 - 

Twin UHF Radio Pack #7090761 

The TX650 is GME’s most compact 

UHF 40 channel radio, at just 

12mm thick. 

Features: 

– Ability to scan through all 

40 channels. 

– 5 different calling tones. 

– Ability to monitor two channels 

at once. 

– Power save mode when ont in use. 

– CTSS- select on of 38 codes 

per channel. 

– Key pad lock. 

– VOX - Talk without pressing the 

transmit button. 

– Roger beep. 

– LCD Display. 

– Only 12mm thick. 

– Trasmits 1W or 0.5W 

at close range. 

Comes complete with 2 rechargeable 

radios, cradle charger, AC adapter, 

2 ear mics, and 2 neck lanyards. 

GME LCM7000 carry case 

#7090710 

GME TX650 car charging kit 

#7090762 

GME TX610 Speaker 

microphone #7090705 

GME HS6000 head set #7090713 

42 


Survey Accessories – HP Calculators 

HP48GII 

#7310527 

2D and 3D graphics calculator with 

over 180 scientific constants and 

units built in. 128KB memory. 

HP50G 

#7310532 

2D and 3D graphics calculator with 

more than 2,300 built in functions. 

2.5MB memory with SD card slot. 

HP35S 

#7310599 

Scientific calculator with RPN 

or algebraic logic. 30KB memory. 

Survey Accessories – HPRC Cases 

HPRC - High Precision 

Resin Cases 

HPRC cases are designed tough 

for any purpose, including: survey, 

photography, military, police, naval, 

and much more. 

Manufactured and designed in 

Italy, HPRC cases are made to the 

highest standards, and protect your 

equipment from dust, water, impacts, 

corrosion and chemical agents. 

All HPRC cases come with a life time 

unconditional warranty. If it breaks, 

you receive a new one on exchange, 

no questions asked. 

Sizes range from small flash card 

cases all the way to large wheeled 

trunks. 


Survey Accessories – Measuring tapes 

Tajima Engineer 

Steel 


Fibre Glass 


Plastic Coasted 

Steel 

Tajima Hi-Lock 

Tajima G-Lock 

Tajima Tapes 

G-Lock measuring tapes 

The original “armored” tape measures 

with the thick elastomer cover that 

protects the tape casing and end 

hook and provides a comfortable, 

sure grip. Compact and smooth 

working tapes, with superior 

engineering and easy-to-read crisp, 

clean scales imprinted on white 

backgrounds. In standard, metric and 

standard/metric dual-scale models. 

25mm wide, 7m long - #6100056 

25mm wide, 8m long - #6100057 

25mm wide, 10m long - #6100059 

Hi-Lock measuring tapes 

Compact and smooth working tapes, 

engineered with heavy-gauge ABS 

casings, triple-riveted end hooks and 

cushioned return stops. All feature 

easy-to-read crisp, clean scales 

imprinted on white backgrounds, in 

standard and standard/metric dualscale 

models. 

16mm wide, 3m long - #6100054 

19mm wide, 5m long - #6100055 

25mm wide, 5m long - #6100058 

25mm wide, 7m long - #6100052 

Engineer Tapes 

High quality tapes with end hooks, all 

featuring crisp, clean scales. Available 

in fibre glass or steel. 

30m fibreglass - #6400030 

50m fibreglass - #6400032 

30m plastic coated steel- #6300031. 

50m plastic coated steel - #6300032 

100m steel- #6300037 

44 


Survey Accessories – Measuring wheels 

Tajima JM316 #519047 

30cm wheel diameter. With carry bag. 

Measures to 10,000m. 

Geo Fennel M10 #519090 

1m circumference. With carry bag. 


CST 3140M #5112158 

12.5” diameter wheel. 


CST 3130M #5112157 

10” diameter wheel. 


Measuring wheel bag 416 

for CST #519139 


Survey Accessories – Memory 

Losing data after a work-filled day is frustrating and expensive. 

The electronic accessories from Leica Geosystems comply with a 

higher standard than the commercially available accessories that 

meet consumer or even industry standards. The storage media 

and other data transfer products from Leica Geosystems are 

qualitatively of extremely high value and reliability. 

MCF256 - 256MB 

MCF1000 - 1GB 

MSD1000 - 1GB 

MS1 - 1GB 

MCFAD - Compact flash adapter 

MCF8000 - 8GB 

Model Name 

MCF32 

MCF256 

MCF1000 

MCF8000 

MCFAD 

Capacity 

32 MB 

256 MB 

1 GB 

8 GB 

Compact flash 

adapter 

MCR8 - SF/CR/RAM 

MCR7 - SD/CF 

MS1 

MSD1000 

MCR5 



1 GB 

1 GB 

CF 

SD/CF 

SF/CR/RAM 

46 


Survey Accessories – Miscellaneous 

Model 

Description 

Tajima 

6600019 450G Magnetic 

Plumb Bob 

6600080 Boxcutter knife 

6600050 PL-1700 Chack 

line 

6600027 6" compass 

Nails 

7090723 20mm 

7090719 40mm 

7090720 55mm 

7090722 80mm 

Nail Washer 

7090736 Nail washer for 

55mm and 80mm 

7090721 Nail washer for 

20mm and 40mm 

FIELD BAGS 

7090461 Field bag long 

10 pocket 

7090460 Field bag short 

10 pocket 

7090418 Field bag belt 

Markers 

7090331 Red Crayons 

7290550 Maruzen marker 

Optical Squares 

519504 Double penta 

prism optical 

square. 

Tally Counters 

7090031 Tally counter 

with bracket 

7090030 Tally counter 

hand held 

519504 

Double penta prism optical square. 

6600027 

6” compass 

6600050 

PL-1700 Chack line 

7090418 Field bag belt 

Screen Protector 

LG767907 

SPF01 - Anti glare 

screen protector 

7090331 Red Crayons 

7290550 Maruzen marker 

LG767907 

SPF01 - Anti glare screen protector 

Laser Signs 

7050193 Laser safety sign 

7050194 Stick on laser 

safety sign 

General nails 

20mm, 40mm, 55mm, 80mm 

Washers for nails #7090736, 

#7090721 


Survey Accessories – Miscellaneous 

Tajima Plumbrite #6600019 

Tajima knife #6600080 

10 pocket filed bag 

Short #7090460 

Long #7090461 

Laser safety sign #7050193 

Stick on #7050194 

Tally counter #7090030 

Tally counter with mount 

#7090031 

Field bag belt #7090418 

48 


Survey Accessories – Optical Plummets 

FPM – Made in Germany. 

Nadir and zenith optical 

plummets. 

FG-L100 – Zenith Plummet 

Measuring accuracy 

Mean square plumb line error at 100 m 

±1 mm 

Telescope 

Image position erect and 

true-to-side 

Magnification 32 x 

Shortest target 2.2 m 

distance 

free objective 

diameter 

40mm 

Compensator 

Working range ±10´ 

Mean square setting ±0,15" 

error 

Temperature 

Operating range 

Instrument 

Magnification 

Dimensions 

Weight 

-25°C to +45°C 

32 x 

140x295mm 

3.5 kg 

FG-L30 – Zenith & nadir plummet 

Measuring accuracy 

Mean square plumb line error at 30 m 

±1 mm 

Telescope 

Image position upside down, 

side-inverted 

Magnification 9 x 

Shortest target 0.4 m 

distance 

free objective 

diameter 

Bubble level 

Instrument 

Dimensions 

Weight 

20 mm 

reversion bubble 

level 20" / 2 mm 

140 x 190 mm 

2.2 kg 

FG-LL-30/-31 Zenith 

FG-LL-32/-33 Nadir 

Both laser Zenith and Nadir come with low 

power (approx. 200m) or high power (approx. 

500m) options. This is an ideal solution for 

mining or construction applications where 

longer range laser plumbing is required. 

Adjustments can be made in the field without 

having to open the device 

Technical specifications 

Laser class FG-LL30/-32: 2, < 1 mW 

Laser class FG-LL31/-33: 3 R, < 5 mW 

Laser: diode laser, visible red, 635 nm 

Beam diameter: 13 mm at laser 

Range FG-LL30/-32: 200 m 

Range FG-LL31/33: 500 m 

Self-levelling range: ± 5 % 

Permissible deviation: ± 0.005 % 

Operating time: 26h 

Low battery cut-out: yes 

Watertight: 3.5 m 

Temperature range:- 10° C to + 50° C 

Weight: 3.4 kg 

Accessories: 

FG-DFXI 

Tribrach with circular bubble 

FG-USDFXI 

Conversion kit. 


Survey Accessories – Pentax Binoculars 

Pentax binoculars are made of the finest optics. 

All models comes with a case. We carry the full range 

of Pentax binoculars. Below are our top selling items. 

8 X 21 UCFR #62209 

Magnification: x8 

Objective diamter: 21mm 

10 X 25 UCF XII #62212 



16 X 50 XCF #65793 



20 X 60 PCF WPII #65810 



Top of the range model. 

Survey Accessories – Pentax Cameras 

CR Kennedy is the importer of Pentax for Australia, and stocks 

the full range of Pentax compact cameras, SLRs, and lenses. 

For the best prices on current models, please contact a sales 

representative. 

50 


Survey Accessories – GPS Accessories 

LG767880 LG767879 LG767877 

LG748417 LG733264 LG767905 

LG767791 

GPS Accessories 

Item Number Model Number Description 

LG767880 GHT63 Clamp for attaching GHT39 to pole 

LG767879 GHT62 Holder plate for GHT39 

LG767877 GHT61 Hand strap for GHT39 

LG748417 GHT58 Tripod bracket for GFU Radio 

LG733264 GHT39 Bracket for RX1200 on pole 

LG767905 GVP644 Soft carry bag for CS15 controller 

LG767791 GAD109 GS15 to TNC adapter 


Survey Accessories – Planometers 

Tamaya digital planimeters are excellent tools to use when 

measuring irregular-shaped areas on plans or drawings. 

They eliminate the need for grids, charts, or calculations 

done by hand. 

Tamaya Planix 7 - #08206962 

The Planix 7 is a roller planimeter. 

It is attached to wheels that allow 

unlimited horizontal travel and vertical 

travel within the limits of the arm 

movement. 

Tamaya Planix 10S - #08206964 

The Planix 10S is a digital planimeter, 

used to calculate areas and lines on 

a map. 

Tamaya Planix Ex - #08207000 

The PLANIX EX not only allows you 

to quickly and accurately measure 

areas, but also allows you to calculate 

lengths, coordinates, radii, and 

angles. 

Scalex Mapwheel SCMW 

#SCALEX MAPWHEEL 

This is the perfect tool, specifically 

designed for quickly taking scale 

measurements from maps. Just select 

the built-in scale factor to match the 

map and roll the MapWheel along 

any straight or curved line. The 

measurement is displayed instantly. 

Calculate road distances and fuelcosts 

easily. 

Scalex Planwheel SA2 

#SCALEX PLANWEEL 

The PlanWheel SA2 is the perfect 

tool for taking scaled measurements 

from blueprints, maps and plans. 

Just select the built-in scale factor 

to match the plan and roll the 

PlanWheel. The measurement is 

displayed instantly. 

Scalex Protective Case 

#SCALEX CASE 

Made of high impact ABS, this rugged 

case provides the protection required 

on the job. With a hot-stamped 

Scalex legend and flocktex interior, 

the case can also hold an extra set of 

batteries. 

AC Adapter For Planix 7 

#08206971 

Battery for Planx 10S 

#08206967 

Map wheel 

#7290462 

52 


Survey Accessories – CST Poles 

CST 2.0m / 2 section pole 

534309 

CST 2.5m / 2 Section pole 

532509 


532509 


534512 


534418 / 534416 

Pentax Barbers Pole 

519418 

CST range pole 

#523706, 534400 

CST Prism Poles with 5/8” Thread and Circular Bubble Level 

Item number 534309 534709 534708 532509 534417 519045 534512 534513 534416 534418 

Model 67- 

4509TML 

67- 

4708TML 

67- 

4708TMA 

67- 

4509TMA 

67- 

4508TMA 

67- 

4608TMA 

67- 

4512TMA 

67- 

4512TML 

67- 

4515TMA 

67- 

4515TML 

Height 2.0m 2.5m 2.5m 2.5m 2.5m 2.5m 3.6m 3.6m 4.6m 4.6m 

Sections 2 2 2 2 2 2 3 3 4 4 

Material Aluminium Aluminium Aluminium Aluminium Aluminium Fibreglass Aluminium Aluminium Aluminium Aluminium 

(light) 

(light) 

Lock Quick Twist Twist Quick Quick Quick Quick Quick Quick Quick 

Thread Leica Leica 5/8” 5/8” 5/8” 5/8” 5/8” Leica 5/8” Leica 

Spiggot Spiggot 

Spiggot 

Spiggot 

CST Range Poles 

Item Number 523706 534400 583720 

Height 1.8m 1.8m 2m 

No. of pieces 2 1 2 

Pentax 

Item Number 519418 

Model MT-31 

Description Mini Pole 


Survey Accessories – Leica Poles 

GLS115 

GLS111 

GLS112 

GLS113 

GLS14 

GLS30 

GLS12 

GLS13 

Leica Poles 

Item number LG403427 519616 LG754391 LG769226 LG752292 LG766359 LG385500 LG667309 LG667310 LG642106 

Model GLS14 Leica Style GLS12 GLS13 GLS30 GLS31 GLS11 GLS111 GLS112 GLS115 

Max height 0.2m 0.8m 2.0m 2.0m 2.0m 2m 2.15m 2.60m 3.65m 1.3m 

Bubble Circular - - Circular Bull's eye - Circular Bull's eye Bull's eye GLI115 clip on 

Thread Spiggot Spiggot Spiggot 5/8” Spiggot Spiggot Spiggot Spiggot Spiggot 1/4” 

Material 

Aluminium Aluminium Aluminium Aluminium Carbon 

Fibre 

Carbon 

Fibre 

Aluminium Aluminium Carbon 

Fibre 

Aluminium 

Accessories 

GZW12 

LG740328 

1m extension for GLS11 

54 


Survey Accessories – Polytech Pegs 

Polytech Pegs 

Made from polypropylene, a non 

toxic and chemically inert plastic, 

these pegs are half the weight 

of a traditional wooden peg. 

Manufactured and designed by Survey 

Pegs Australia, Polytech Pegs are the 

survey pegs of the future. 

Features include; centring point 

to take a nail or metal tag to, 

lot numbers can be stamped on 

individual pegs, UV resistant, 

heat resistant, non-flammable, 

impervious to white ants, designed 

to be easily driven into various 

soil types, engineered to suit 

state specifications, recyclable and 

available in a range of colours. 

FROM LEFT TO RIGHT OF THE IMAGE 

CADASTRAL: 

75x75x450mm 

STATE: NSW, QLD, WA, TAS. 

CADASTRAL: 75x75x350mm 

Red: WA 

White: QLD 

CADASTRAL: 50x50x350mm 

VIC, QLD, SA, WA, NT, TAS 

75x50x350mm, NSW 

ENGINEERING: 50x50x210mm 

Set out peg. White, green, yellow 

and orange. 


Survey Accessories – Leica Prisms 

Prisms 

Item Number Model Number Prism type Holder Accuracy Range Manufacturer Comments 

LG641617 GPR121 Circular Yes 1.0mm 3,500m Leica 


LG726295 GPR112 Circular No N/A 2,500m Leica Monitoring/Mining prism 


LG362830 GPR1 Circular No 1.0mm 3,500m Leica 

LG639985 GRZ4 360° No 5mm 600m Leica 

LG754384 GRZ122 360° Yes 2.0mm 600m Leica Can be connected to the 

Leica SmartAntenna. 

LG644327 GRZ101 360° Yes 1.5mm 2000m Leica 

LG641762 GMP104 Mini Prism Yes N/A 2000m Leica Monitoring Prism with L-Bar 

for fixed installation 

LG641662 GMP101 Mini Prism Yes 1.0mm 2000m Leica Includes bubble, target plate, 

spike and bag. 

LG641615 GMP111 Mini Prism Yes 2.0mm Long range Leica Includes bubble, and GLS115 

mini reflector pole 

LG642534 GMP111-0 Mini Prism Yes 2.0mm Long range Leica 0 constant prism. Includes 

bubble, and GLS115 mini 

reflector pole 

LG644187 SMP222 Mini Prism Yes 2.0mm Long range Leica Sliding prism, 0 constant. 

Accessories 

Item Number Model Number Description For Manufacturer 

LG362820 GPH1 Prism Holder GPR1 Leica 

LG400080 GPH3 3 Prisms Holder GPR1 Leica 

LG726296 GHT112 Mounting Kit GPR112 Leica 

LG362823 GZT4 Target Plate GPH1 Leica 

LG727406 GDZ112 Rain Shelter GPR112 Leica 

LG642344 GVP608 Soft bag GMP111, GRZ101 Leica 

LG742329 GMP112 Pole extension GMP111 Leica 

LG743503 GAD105 Pole adapter GMP111 Leica 

LG742006 GAD103 Pole adapter GRZ101 Leica 

GPH1P 555631 

GAD103 

GAD105 

56 


Survey Accessories – Prisms & Accessories 

GDZ112 

GHT112 

GMP101 

SMP222 

GMP111 

GMP112 

GMP104 

GRZ4 

GRZ112 

GPH1 

GPH3 

GVP608 642344 


Survey Accessories – Prisms & Accessories 

GTZ4 

GPR121 

GRZ101 

GPR1 

GPR111 

GPR112 

GPR113 

Survey Accessories – Reflectors 

Item Number LG763532 LG763533 LG763534 LG731346 

Model GZM29 GZM30 GZM31 CPR105 

Range 100m 200m 250m 250m 

Mount Tape Tape Tape GLS105 pole 

20x20mm 40x40mm 60x60mm 

CPR105 

GZM29, GZM30 and GZM31 

58 


Survey Accessories – Spray Paint 

Dy-Mark Spray & Mark is Australia’s best selling marking paint. 

All cans have an inverted nozzle,weigh 340g and are suitable 

for a range of applications such as surveying, construction, 

landscaping, civil works, etc. Cans are available as individual 

items or in packs of 12. 

ITEM NUMBER DESCRIPTION 

7090332B 

Survey spray black 

7090332DB Survey spray dark blue 

7090332FG 

Survey spray fluro green 

7090332FO 

Survey spray fluro orange 

7090332FP 

Survey spray fluro pink 

7090332FR 

Survey spray fluro red 

7090332G 

Survey spray green 

7090332GR Survey spray grey 

7090332O 

Survey spray orange 

7090332R 

Survey spray red 

7090332W 

Survey spray white 

7090332Y 

Survey spray yellow 

7090338 Spray paint holster (plastic) 

7090337 Spray paint attachment wheel 

Survey Accessories – General Flagging Tape 

Item Number Description 

7090481DB 

Dark Blue 

7090481DG 

Dark Green 

7090481FL 

Fluro Lime 

7090481FO 

Fluro Orange 

7090481FP 

Fluro Pink 

7090481LG 

Light Green 

7090481O 

Orange 

7090481R 

Red 

7090481SB 

Sky Blue 

7090481W 

White 

7090481Y 

Yellow 

7090480 Red/White 

7090482 Fluro Orange 

These vinyl flagging tapes are ideal for 

surveyors, and available in a wide range 

of colours. All rolls are 25mm x 100m. 


Survey Accessories – Staves 

LR39 and LR34 SMP222 GMP104 

GMP111 

GMP112 

GRZ4 

Leica 

Item Number Model Description 

LG764452 GSS113 3m/1 section fiberglass, barcode & E face. 

LG522794 GKNL 4m/3 section fiberglass, barcode & E face. 

LG757761 GTL4M 4m/4 section fiberglass, barcode & metric face. 

LG746614 GSS122-3 4m/4 section fiberglass, barcode & E face. 

LG667113 GTL4C 4m/4 section aluminum, barcode & metric face. 

LG746613 GS112 4m/4 section aluminum, barcode & E face. 

LG741882 GS111 5m/4 section aluminum, barcode & E face. 

LG563733 GWCL60 0.6m/1 section barcode & Invar scale face. 

LG563659 GPCL2 2m/1 section Invar bar & barcode face. 

LG560271 GPCL3 3m/1 section Invar bar & barcode face. 

E Face Staff 

Metric Staff 

Myzox 


011053 SUM33EB 3m/3 section E face - 118cm with cover 

091597 SUM33MB 3m/3 section Metric - 118cm with cover 

091551 ALG-55EB 5m/5 section E face - 127cm with cover 

011001 ALG-55MB 5m/5 section Metric - 127cm with cover 

011201 ALS-74 7m/4 section Metric - 182cm with cover 

Astor 


519104WC 3M/3E 3m/3 section E face - 118cm with cover 

519102WC 3M/3M 3m/3 section Metric - 118cm with cover 

519121WC 5M/5E 5m/5 section E face - 127cm with cover 

519118WC 5M/5M 5m/5 section Metric - 127cm with cover 

519175WC 7m/5E 7m/5 section E face - 182 cm with cover 

Accessories – Staff Bubble 

Item Number Description 

519097 LR39 Staff Bubble Plastic 

519098 LR34 Staff Bubble Metal 

519092 LR7 Staff Bubble detachable for Astor 

519618 Clip on Bubble for GTL4 Staves 

111114 SA60 bubble for Myzox 5m & 7m staves 

111115 SB60 bubble for Myzox 3m staves 

211090 Staff 5/8” thread prism adapter 

CST Cut and Fill Rods 


520730 06-808LRM Cut & fill laser rod, 2.5m, 3 section. 

520731 06-TLM Cut & fill rod, 2.4m, 2 section. 

60 


Survey Accessories – Leica Tribrachs 

CTB101 

GDF111 

GDF112 

GDF121 

GDF122 

GDF22 

Model Name Model Number Optical Plummet Torsional Stiffness 

GDF121 LG667304 No

Survey Accessories – Bi-Pods 

Leica and CST bi-pods are 

ideal for holding prism 

poles in the field. 

GSR2 

#LG555720 

for 25mm diameter poles (Leica 

GLS11/GLS11K). 

GSR111 

#LG667319 

suitable for poles of all diameters. 

CST 67-4260 

Quick Release 

#534261 

Fits all CST poles 

(22mm - 38mm diameter). 

CST 67-4260X Thumb Release 

#534260 

Fits all CST poles 

(22mm - 38mm diameter). 

62 


Survey Accessories – Tripods 

Aluminium Flat Head #519026 

Aluminium Dome Head #519027 

CST Wood #519032 

CST Wood/Fibreglass #519043 

Elevating tripod #519046 

Tripod for staves #533950 

GST20 #LG296632 

GST20-9 #LG394752 

GST05 #LG399244 

GST05L #LG563630 CTP106 #LG767712 GST120-9 

#LG667301 


Survey Accessories – Tripods 

CTP101 

#LG726831 

CTP102 

#LG726832 

CST 67-4250 

#534262, #534263 

GHT 58 Tripod Bracket 

#LG734163 

GHT43 Tripod Bracket 

#LG748417 

GST4 Tripod Star 

#LG332200 

Model Item # Manufacturer Material Leg clamp top Weight Max 

height 

Collasped 

height 

Total 

Station 

GPS Laser/ 

Levels/ 

Targets 

RA FLAT 519026 RA Aluminium Screw flat 5kg 1.73m 1.3m no no yes no 

RA FLAT 519026QR RA Aluminium Quick release flat 5kg 1.73m 1.3m no no yes no 

RA DOME 519027 RA Aluminium Screw dome 5kg 1.73m 1.3m no no yes no 

RA DOME 519027QR RA Aluminium Quick release dome 5kg 1.73m 1.3m no no yes no 

ELV-3000 519046 RA Aluminium Screw flat 6.2kg 3m 1.26m no no yes no 

ELV-COVER 519036 RA Aluminium Screw Flat 5kg 1.73m 1.03m No No Yes No. 

CTP101 LG726831 Leica Wood Screw flat 5kg 1.73m 1.3m yes yes yes no 

CTP102 LG726832 Leica Wood Quick release flat 5kg 1.73m 1.3m no yes yes no 

CTP103 LG332200 Leica Aluminium Screw flat 5kg 1.73m 1.3m no yes yes no 

GST05 LG399244 Leica Wood screw flat 5.6kg 1.76m 1.07m no yes yes no 

GST05L LG563630 Leica Aluminium screw flat 5.6kg 1.76m 1.07m no no yes no 

CTP106 LG767712 Leica Aluminium screw flat 3.45kg 1.65m 1.0m no no yes no 

GST20-9 LG394752 Leica Wood screw flat 6.4kg 1.8m 1.07m no yes yes no 

GST120-9 LG667301 Leica Wood screw flat 6.4kg 1.8m 1.07m yes yes yes no 

GST20 LG296632 Leica Wood screw flat 6.4kg 1.8m 1.07m no no yes no 

WDW20HV 519032 CST Wood Screw flat 7.2kg 1.83m 1.07m yes yes yes no 

WDF20 519043 CST Wood/ 

fibreglass 

Screw flat 7.2kg 1.83m 1.07m no yes yes no 

68-3950 533950 CST Aluminium Screw Gator for 

staves 

1-1/4" 

diameter 

67-4250X 534262 CST Aluminium Thumb 

Release 

67-4250 534263 CST Aluminium Quick 

Release 

For poles 

(22- 

38mm) 

For poles 

(22- 

38mm) 

Poles/ 

staves 

1.5kg 1.07m 1.07m no no no yes 

1-1/4” 

1.3kg 1.8m 1.2m No No No Yes 

1.3kg 1.8m 1.2m No No No Yes 

Accessories 

Name Description Model number 

GST4 Tripod Star LG332200 

GHT43 Tripod Bracket LG748417 

64 


GHT58 Tripod Bracket LG734163 

Tripod Bag Tripod Bag 516020 

Tripod Bag 

#516020

Survey Accessories – Goscam 

The Goscam is a waterproof 17mm 

diameter, 1m long wireless inspection 

camera with colour 3.5” LCD monitor, 

and allows for easy visual inspection 

of hard-to-reach areas. Easily find, 

diagnose and solve problems with the 

flexible extended tube & accessories. 

Goscam also allows videos and photos 

to be recorded onto a SD card. 

The Goscam kit includes wireless 

camera, wireless LCD monitor, hard 

carry case, and clip on accessories 

(hook, mirror and magnet). 

Item number 

GOSCAM 8802AL 

GOSCAM 8802T 

GOSCAM GT4803 

Description 

Goscam wireless inspection camera 

Inspection camera tube extension 

Mini camera extension 

The perfect tool for: 

- Checking for internal leaks around 

chimney flashing. 

- Inspecting car components. 

- Reading the model number on a 

furnace fan motor. 

- Retrieving a screw lost under the 

refrigerator. 

- Checking the teeth on a kitchen 

garbage disposal. 

- Reading the service tag on hard-toreach 

equipment. 

- Inspecting inside of 2” heat exchanger 

tubes (boiler). 

- Examining AC coils in a residential 

furnace. 

- Finding cabling installed in a closed 

wall cavity. 

- Checking air conditioners for debris. 

- Checking for lint build up past the 

primary filter in a dryer. 

- Checking sink connections in a 

crowded sink space. 

- Checking the gas connections under 

an installed stove. 

Survey Accessories – Wall Stations 

Wall Station Mount with Leica Male Spigot 

#602009 

MTL1-LR slim line mining laser 

#7090127SL 

Wall stations are used for underground 

survey control to create a survey 

network. They are typically used in 

conjunction with Leica prisms and Leica 

total stations or a MTL1-LR underground 

mining laser. 

Item number Description 

7090127 MTL1-LR Mining Laser 

7090127SL MTL1-LR slim line mining laser 

602008 Wall mount for MRL1-LR laser 

602009 Wall Station Mount with Leica Male Spigot 

602011 Wall Station Sleeves Aluminum - 1m length 

602017 Wall Station Sleeves Stainless steel - 80mm 

602010 Steel pillar plate 

602020 Monitoring P Plate 

LG362820 GPH1 Single Prism Holder 

LG362830 GPR1 Prism in container 


Survey Accessories – ikeGPS 

The ike1000 is a combination of a GPS, 

camera, rangefinder and compass in one 

instrument. Ike1000 is able to instantly 

provide the location of a site up to 

1000m away. 

A number of benefits 

immediately result: 

- The user can capture multiple points 

while remaining at a single site. 

- The user can remain safe, where 

physically collecting the points would 

put him/her at risk. 

- The data collection time can 

be reduced. 

The ike1000 is shock and water proof to 

IP67, and boasts a Windows Mobile 

computer, GPS, compass and 

inclinometer. ikeGPS simplifies GIS data 

capture to “point-and-shoot”. The 

targeted point location is calculated from 

the instrument readings, inclusive of local 

GPS location, compass bearing, pitch and 

roll and rangefinder distance. Cross-hairs 

are embedded into the image so the 

captured location data is 100% verifiable 

with an image that can always be 

referred back to for confirmation. ikeGPS 

integrates with data capture applications 

like ArcPad and comes with a range of 

optional accessories. 

Users such as the US military, oil & gas 

industry, utilities, forestry, land surveyors, 

law enforcement, environmental 

researchers, and public works agencies 

have been using ikeGPS for years in 

situations where targets are difficult to 

reach or safety is a concern. 

Range: 1000m ±0.5m + 0.5% 

Camera Resolution: 5 MP 

GPS Type: 12 channel L1. 

66 


C.R. Kennedy National Hire Fleet 

We carry a comprehensive range of hire equipment to cover 

nearly all survey and measurements applications 

These include: 

- Total stations 

- Theodolites 

- GPS/GNSS 

- Machine control 

- Scanning lasers 

- Optical and laser levels 

- Pipe lasers 

- Cable locators 

- Accessories such as staves, tripods, 

prisms, etc. 

What does this mean to you 

- The fleet consists of the world’s most 

advanced equipment, kept in 

excellent condition 

- We supply basic training for rapid 

productivity 

- Allows you to evaluate on the job 

without purchase commitment 

- Gives you the equipment you need for 

the one-off job 

- Allows you to take on jobs you 

otherwise couldn’t handle 

Repairs and Service 

Service Centres 

We have service centres at all of our offices. 

With technicians who have been factory 

trained, workshops that are accredited by 

Leica Geosystems, and use of only genuine 

components, CR Kennedy can offer you the 

best service for your instrument. We offer 

replacement instruments from our hire fleet 

during a servicing to minimise down time. 


Technical Support & Training 

Over many years, C.R.Kennedy 

has acquired the expertise of 

the leaders in the surveying 

field. We have built a surveyor 

based service business with a 

full range of the best products 

in the world, combined with 

the best support people in 

the country. 

Technical Support 

At C.R.Kennedy, we understand the 

importance of supporting our extensive 

range of surveying products. With a 

highly committed and responsive 

technical support and training team who 

can answer your questions, whether 

simple or complex, and provide the 

required product training. 

To this extent, we have recently invested 

in our support structure to expand our 

team, so that we can continue to provide 

the level of service that our clients 

demand. This new support and training 

structure comprises of state based 

personnel that will assist with your day 

to day support and training needs, and 

backed-up by a national team of product 

experts. 

Training 

In addition to technical support, we also 

understand that high quality training is 

critical and the key to unlocking the true 

potential of your survey equipment. 

Our structured training programs will 

enable you to take full advantage of your 

instruments capabilities, and improve 

your work flow, both in the field and in 

the office, with the goal of increasing 

your productivity and giving your 

company a competitive advantage. 

C.R.Kennedy offers a flexible selection of 

training packages to suit your company’s 

needs, experience and time frame. 

CPD Accreditation 

These courses are designed to advance 

the knowledge of our clients in the most 

efficient and productive use of their 

surveying equipment and software, and 

will contribute to their continued 

professional development. 

In this regard, we have received CPD 

accreditations for these courses by a 

number of state Surveying Authorities. 

Please contact us for details and 

applicable CPD points. 

VIC / TAS: (03) 9823 1884 

NSW / ACT: (02) 9552 8384 

QLD: (07) 3632 6784 

WA / NT: (08) 9489 8584 

SA : (08) 8410 1366 

surveysupport@crkennedy.com.au 

surveytraining@crkennedy.com.au 

68 


Training Courses 

Total Stations (TPS) 

Getting Started (1 day) 

Workflow training for any Leica Total 

Station, including data exchange with 

popular CAD packages. 

Learn the standard functions of 

your TPS instrument and be able 

to perform common survey tasks, 

including detail and set-out surveys. 

Advanced TPS (1 day) 

Understand how to customise your 

instrument, perform advanced field 

coding, create / edit data export 

formats and the more advanced 

on-board applications. Import data 

into Leica Geo Office (LGO), edit 

and export to required format and 

generate jobs using design to field. 

GPS/GNSS 


Learn the basic concepts of 

GPS/GNSS positioning and the 

functionality of your Leica equipment, 

workflow training in RTK including 

detail surveys, coding and export of 

data, and perform site transformation 

to gain an understanding of 

coordinate systems. 

Advanced (1 day) 

Explore the advanced settings of 

the Leica GPS/GNSS. Learn complete 

equipment configuration, static data 

capture and basic processing, field 

coordinate transformation, the more 

advanced applications and how to 

create field data reports. 

Leica Geo Office 


Workflow training in Leica Geo Office 

incorporating TPS/GPS data import, 

editing, simple processing, and 

basic analysis. This course provides 

a detailed explanation behind the 

settings and functionality enabling the 

user to get the most from the LGO 

software. 

Advanced (1 day) 

Develop your understanding of 

static post-processing, data analysis, 

reporting and network adjustmnet. 

Learn new troubleshooting skills. Then 

further explore LGO looking at precise 

ephemeris, internet download and 

image referencing. 

Additional Courses 

Introduction to RoadRunner 

(1 day) 

This course is designed for new users 

of the RoadRunner application. You 

will be taken through the practical 

procedures necessary for performing 

road setout within RoadRunner. The 

course will include an explanation of 

stringlines, RoadRunner elements and 

task development. 

Introduction to Laser Scanning 

(1 day) 

Overview of 3D Laser Scanning 

technology and how this could 

benefit your business. Includes the 

basic principles of data capture, 

target registration and 3D pointcloud 

processing using specialised 

software. Plus reviewing case studies 

and projects. 

Customised Company Training 

All published courses may be 

customised to your company’s 

requirements, allowing you to get the 

most from your training investment. 

Choose between training on-site or 

at one for our state based training 

facilities. Or let us know what 

training you need and we’ll do our 

best to accommodate. 

Product Workshops 

Throughout the year we will hold a 

series of half day product workshops 

aimed at existing users. These 

workshops are designed to keep users 

up to date with new applications, 

software updates, new products, 

improved workflows and general 

advancements in survey technology. 


Machine Control Training Centre 

Located in Altona North, Victoria, the 

C.R. Kennedy Training Centre has live 

earthmoving machinery on site in a 

civil construction environment so that 

visitors can experience and use the 

Leica Geosystems machine control 

applications on a real machine. 

For further information contact 

your local CRKennedy office or 

surveytraining@crkennedy.com.au. 

There is also a full simulation training 

room for any client who has not 

yet experienced the ease of using 

a Machine Control application. 

The centre provides the perfect 

opportunity to get a hands-on preview 

of what operating a system is like. 

PowerDigger 2D Screen 

C.R. Kennedy is dedicated to providing 

the best instruments and systems 

to the surveying and construction 

community. The investment in this 

centre to support our clients reflects 

that commitment. 

It is important to us that you know 

what you are investing in and how 

it will work. To that end the 

C.R. Kennedy Training Centre offers 

comprehensive, practical training with 

experienced technical staff on hand to 

answer all questions. 

Groups or individual training can 

be catered for and certificates of 

completion are awarded to all 

participants. 

8 Kearsley Court 

North Altona, Victoria 

Phone: 03 9823 1533 

PowerDigger 2D & 3D Screens 

Pinnacle Rd 

IVES RD 

BALDWIN RD CLIFT CT 

STUBER RD 

KEARSLEY CT 

Grieve Pde 

70 


Maintenance Agreements 

Maintenance contracts 

Give yourself and your instrument 

special attention. Service contracts 

reduce your instrument running costs, 

promote instrument longevity and 

ensure the best possible performance. 

Typical contracts may include: 

- Extension of warranty including parts 

and labour for remedial services. 

- Priority service and repairs. 

- Certain software/firmware upgrades 

free of charge. 

- Loan units made available free of 

charge. 

- Annual service including test protocol 

and service declaration. 

- Flexible invoice periods to suit your 

business. 

- Fixed costs per annum to allow easy 

budgeting. 

Fully Maintained Rentals 

Our Fully Maintained Rental program is 

designed specifically for surveyors to 

provide the ideal business solution. By 

combining a rental with a maintenance 

agreement, we can offer protection 

from obsolescence with regular 

upgrades to the latest technology, and 

ensure your survey instruments are 

productive at all times. By reducing 

your capital expenses on equipment, 

you can preserve your capital and 

better budget for new business 

opportunities. 

Advantages of a fully maintained 

rental are: 

- One fixed monthly cost, so you can 

better budget your work. 

- Reduced capital expenditure. 

- No maintenance costs or repair bills. 

- The latest software and hardware 

protecting you from obsolescence. 

- Loan equipment free of charge 

during servicing so you’re always 

able to work. 

Insurance 

You wouldn’t purchase a car without 

insurance, so why wouldn’t you insure 

a total station 

C.R.Kennedy can recommend the right 

insurance options for your instruments. 

Finance Options 

With various finance companies, 

C.R.Kennedy can offer a range of flexible 

finance options to suit individual 

circumstances. You can reduce your 

capital expenses, get access to the latest 

equipment, and meet the requirements of 

the work you have today. 


Notes 

72 


Notes

crkennedy.com.au 

Victoria 

663 Chapel Street, South Yarra, 3141 

Tel (03) 9823 1555 

Fax (03) 9827 7248 

Email vicsurvey@crkennedy.com.au 

New South Wales 

3 / 280 Coward Street, Mascot, 2020 

Tel (02) 9552 8370 

Fax (02) 9552 8379 

Email nswsurvey@crkennedy.com.au 

Queensland 

80 Kingsford Smith Drive, Albion, 4010 

Tel (07) 3862 6210 

Fax (07) 3862 6212 

Email qldsurvey@crkennedy.com.au 

Central Queensland 

PO Box 4032, Mackay South, 4740 

Tel (07) 4957 6733 

Fax (07) 4957 6755 

Email itruscott@crkennedy.com.au 

Far North QUEENSLAND 

Unit 1, 131 Scott Street, Cairns, 4870 

Tel (07) 4031 5399 

Fax (07) 4031 5404 

Email qldsurvey@crkennedy.com.au 

South Australia 

261 Sturt Street, Adelaide, 5000 

Tel (08) 8410 1366 

Fax (08) 8410 1370 

Email sasurvey@crkennedy.com.au 

Western Australia 

17-19 Oxford Close, West Leederville, 6007 

Tel (08) 9489 8500 

Fax (08) 9489 8501 

Email wasurvey@crkennedy.com.au 

Training surveytraining@crkennedy.com.au 

Support surveysupport@crkennedy.com.au

2011-2012 cataloGuE - CR Kennedy

Create successful ePaper yourself

Delete template?

Save as template?