RODE SHOTGUN MICROPHONES
RODE SHOTGUN MICROPHONES
RODE SHOTGUN MICROPHONES
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>RODE</strong> <strong>SHOTGUN</strong> <strong>MICROPHONES</strong><br />
A range of affordable short and full length shotgun microphones and complementary<br />
accessories, suitable for broadcast video and theatre applications. The range includes<br />
some entry-level companions for many camcorders, and higher performance models,<br />
popular with broadcasters.<br />
Rode VideoMic<br />
Designed for use with video camcorders, the VideoMic uses a true externallypolarised<br />
capsule and features a tough ABS construction. An integrated<br />
suspension-mount provides a very high level of mechanical isolation, eliminating<br />
virtually all motor noise, while a cold-shoe fitting is included to ensure fast, easy<br />
camcorder mounting. The windshield reduces unwanted wind noise, pad switches<br />
allow -10 and -20dB attenuation and a switched high-pass filter gives the flexibility to<br />
record in most environments.<br />
The VideoMic has a stereo mic level output and a single PP3 battery provides 100<br />
hours of continuous operation. The captive cable terminates in a convenient rightangled<br />
3.5mm 3-pole jack plug and is unobtrusive to camcorder operation when<br />
connected.<br />
Included accessories: WSVM foam windshield.<br />
Optional accessories: Deadcat wind-cover, tripod table stand, PG1 pistol grip, VXLR<br />
adapter, VC1 extension cable.<br />
Rode VideoMic Pro<br />
Similar to the standard VideoMic, the Pro version offers the same circuitry and<br />
functions as standard, but in a much more compact and lightweight profile. A PP3<br />
battery provides 70 hours of continuous operation. Length 150mm. Weight 85g.<br />
Included accessories: WSVMP foam windshield.<br />
Optional accessories: PG1 pistol grip, Deadcat VMP wind-cover, Boompole, Tripod<br />
table stand, VXLR adapter, VC1 extension cable.<br />
Rode NTG-1 and NTG-2<br />
Lightweight short shotgun microphones featuring true externally-polarised condenser<br />
capsules. A wide bandwidth and controlled polar response, coupled with low-noise<br />
electronics, delivers excellent results for film and broadcast video applications. The<br />
NTG-1 is 48V phantom powered, with integral switchable HP filter. The NTG-2 has the<br />
same specifications as the NTG-1, but with the added flexibility of battery powering<br />
(via a single 1.5V AA cell) as well as standard 48V phantom power. Both have XLR-3<br />
connectors.<br />
Included accessories: RM5 stand adapter, ZP1 zip pouch and WSVM foam<br />
windshield.<br />
Optional accessories: Blimp suspension basket windshield. WS6 Deluxe windshield.<br />
Deadcat wind-cover. NTSM3, NTSM4, NTSM5 suspension mounts. PG2 shockmount<br />
pistol grip. Boompole.<br />
Rode NTG-3<br />
Precision shotgun microphone featuring true externally RF-biased condenser<br />
capsules, which make the NTG-3 ‘almost completely resistant to moisture’, a positive<br />
bonus when recording in adverse, condensation-rich environments. A wide<br />
bandwidth and more controlled polar response than the NTG-1 and NTG-2, coupled<br />
with low-noise electronics, and increased output, delivers excellent results for location<br />
film and broadcast video applications, the microphone boasts ‘50% less self-noise<br />
than the majority of shotgun microphones’. The NTG-3 is 48V phantom powered (44-<br />
52V, minimum 5mA), with a 3-pin XLR connector.<br />
Included accessories: RCNTG3 water resistant storage container, RM5 microphone<br />
stand adapter, ZP2 zip pouch and WSNTG3 foam windshield.<br />
Optional accessories: Blimp suspension basket windshield. WS7 Deluxe windshield.<br />
Deadcat wind-cover. NTSM3, NTSM4, NTSM5 suspension mounts. PG2 shockmount<br />
pistol grip. Boompole.<br />
Accessories for Rode Shotgun Microphones<br />
PG1, PG2 Pistol Grips<br />
Allows addition of a hand-grip to a microphone. PG1 has a ‘cold’ accessory-shoe<br />
fitting to allow microphones such as the VideoMic, VideoMic Pro and Stereo VideoMic<br />
to be mounted onto it. PG2 has an inter-changeable, elastic suspension mount that<br />
holds the microphone in isolation from the grip. Fits 19-20mm or 21-22.5mm<br />
diameter microphones, such as the NTG-1, NTG-2 or NTG-3. Both grips contain<br />
integral cable management allowing easy, tidy handling of microphones and 3/8 inch<br />
threads in the base allowing attachment to a boompole.<br />
WS6, WS7 Deluxe windshields<br />
Deluxe, furry windshields designed to reduce wind noise when recording in adverse<br />
environmental conditions. WS6 fits a shotgun microphone with maximum slot length<br />
of 160mm and diameter 21-22.5mm. Suitable for NTG-1 and NTG-2 models. WS7<br />
fits a shotgun microphone with maximum slot length of 186.5mm and diameter 19-<br />
20mm. Suitable for NTG-3 model.<br />
. . . continued overleaf
For pricing in all currencies please visit www.canford.co.uk<br />
74-181 <strong>RODE</strong> VIDEOMIC MICROPHONE Condenser, on-camera<br />
74-202 <strong>RODE</strong> VIDEOMIC PRO MICROPHONE Condenser, compact, on-camera<br />
74-182 <strong>RODE</strong> NTG-1 MICROPHONE Condenser<br />
74-183 <strong>RODE</strong> NTG-2 MICROPHONE Condenser<br />
74-201 <strong>RODE</strong> NTG-3 MICROPHONE Condenser, shotgun<br />
‘Blimp’ Shockmount Suspension Basket Windshield<br />
A complete basket-windshield and shockmounting pistol-grip, accessory kit for<br />
shotgun microphones of up to 325mm in length. Winner of a 2009 Red Dot Award<br />
and Australian International Design Award for outstanding product design, it greatly<br />
reduces wind and handling noise by adjustable, dual hoop suspensions. Comes<br />
complete with ‘Dead Wombat’ furry basket windshield cover and a cable ‘tail’ allowing<br />
connection to microphone cable via the built-in pistol-grip. Suitable for use with NTG-<br />
1, NTG-2 and NTG-3 models.<br />
Deadcat Wind-cover<br />
Used in conjunction with the standard foam windshield supplied with the VideoMic,<br />
NTG-1, NTG-2 and NTG-3 models. Provides extra attenuation of external wind noise<br />
in demanding outdoor environments.<br />
Deadcat VMP Wind-cover<br />
Used in conjunction with the standard foam windshield supplied with the VideoMic<br />
Pro model. Provides extra attenuation of external wind noise in demanding outdoor<br />
environments.<br />
Rycote Mini Windjammer for Video Mic Pro<br />
Produced by the experts in wind-noise reduction themselves, specifically for this<br />
model of microphone, this provides up to 20dB extra attenuation of external wind<br />
noise in demanding outdoor environments to the expected Rycote standard.<br />
Tripod<br />
Table-top alloy tripod stand with folding legs and a ball and socket joint, allowing<br />
precise angling of the VideoMic. 3/8 inch thread.<br />
VXLR Adapter<br />
3.5mm jack socket to male XLR, allowing the VideoMic to feed into cameras with XLR<br />
inputs.<br />
VC1 Extension cable<br />
3.5mm 3-pole jack plug to socket, for VideoMic, 3 metres length.<br />
NTSM3, NTSM4, NTSM5 Elastic suspension mounts<br />
For use with NTG-1, NTG-2 and NTG-3. NTSM3 has a ‘cold’ accessory-shoe fitting<br />
with integrated 3/8 inch thread. NTSM4 has a standard 5/8 inch thread and is<br />
supplied with a 3/8 inch adapter. NTSM5 has a dummy microphone fitting suitable for<br />
mounting in the microphone clamp holder found on many broadcast cameras<br />
including PD170 and FX1.<br />
Boompole<br />
A light-weight, telescopic, five-section, alloy, boompole; balanced for easy handling.<br />
Extended length 3 metres. 3/8 inch thread.<br />
74-224 <strong>RODE</strong> PG1 PISTOL GRIP Cold shoe, for Videomic or cold-shoe microphones<br />
74-225 <strong>RODE</strong> PG2 PISTOL GRIP Shock mount, for NTG-1, NTG-2 or NTG-3 microphone<br />
74-226 <strong>RODE</strong> WS6 WINDSHIELD Deluxe, for NTG-1 or NTG-2 shotgun microphone<br />
74-227 <strong>RODE</strong> WS7 WINDSHIELD Deluxe, for NTG-3 shotgun microphone<br />
74-228 <strong>RODE</strong> BLIMP WINDSHIELD Shock mount suspension, for NTG-1, NTG-2 or NTG-3 microphones<br />
74-213 <strong>RODE</strong> DEADCAT MICROPHONE COVER High-wind, for VideoMic, NTG-1, NTG-2 or NTG-3 microphones<br />
74-212 <strong>RODE</strong> DEADCAT VMP MICROPHONE COVER High-wind, for VideoMic Pro microphone<br />
74-9969 RYCOTE 55409 MINI WINDJAMMER WINDSHIELD For Rode Videomic Pro microphone<br />
74-214 <strong>RODE</strong> TRIPOD MICROPHONE STAND Folding<br />
74-215 <strong>RODE</strong> VXLR microphone adapter, 3.5mm to XLR-3<br />
74-216 <strong>RODE</strong> VC1 microphone extension lead, 3.5mm jack, 3m<br />
74-220 <strong>RODE</strong> NTSM3 Elastic microphone suspension<br />
74-221 <strong>RODE</strong> NTSM4 Elastic microphone suspension<br />
74-222 <strong>RODE</strong> NTSM5 Elastic microphone suspension<br />
74-217 <strong>RODE</strong> BOOMPOLE 3 metre, 5 section<br />
UK Sales - tel 0191 418 1122 International Sales - tel +44 191 418 1133 Tech Support - tel 0191 418 1144<br />
fax 0191 418 1123 fax +44 191 418 1134 fax 0191 418 1145<br />
sales@canford.co.uk international@canford.co.uk techsupport@canford.co.uk