Spa-N-A-Box Owner's Manual - ActiveForever
Spa-N-A-Box Owner's Manual - ActiveForever
Spa-N-A-Box Owner's Manual - ActiveForever
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
User’s Guide<br />
FILLING THE SPA<br />
1. Ensure that the power pack is not plugged in.<br />
2. Remove the protective caps from<br />
the suction and discharge fittings<br />
inside the spa. Place the caps in a safe<br />
location.<br />
3. Using a garden hose, fill the spa<br />
with approximately 1/2 inch<br />
of water. STOP! With hands,<br />
smooth out any wrinkles on<br />
bottom of liner, starting from the<br />
center of liner and proceeding<br />
outwards towards the wall.<br />
Continue filling the spa with water<br />
to two inches above the top of the<br />
suction fitting.<br />
Be careful not to over fill the spa,<br />
or the spa may overflow during<br />
use. Each average adult will<br />
raise the water level in the spa<br />
approximately two inches, and the<br />
turbo wave blower action will raise<br />
water level an additional three to<br />
four inches.<br />
Approximate<br />
Fill Line<br />
16