Changing Springs and Shock Absorbers

Changing Springs and Shock Absorbers
Spring Compressor (Universal) KL-0015
Universally suitable for strut suspensions. Pairs of jaws size 1N and 2N for
spring-Ø of from 80-195 mm included.
KL-0015
Advantages:
Self-locking of the mobile jaw/sliding jaw mount.
Also suitable for conical springs.
Plastic protective inserts (optionally available).
Scope of delivery:
KL-0015 Spring Compressor
Part No. Description Quantiy
KL-0015-100 Cylinder 1
KL-1510 Pair of jaws size 1N 1
KL-1520 Pair of jaws size 2N 1
Technical Data:
Compression length:
Working travel (sliding jaw mount):
Overall length:
Drive:
Maximum load:
Breaking point:
min. 50 mm / max. 345 mm
295 mm
475 mm
27 mm
17,500 N
70,000 N
Note:
Additional jaws for spring-Ø of from 70-240 mm are optionally available.
KL-0015 SP
Spring Compressor (not shown)
As KL-0015, but supplied with pairs of jaws with protective inserts.
Spring Compressor (Universal) KL-2000
Suitable for Struts and Semi-Struts. Supplied with Jaws size 1N and 2N.
KL-2000
Advantages:
Load guided in cylinder tube.
Hardened cylinder tube.
Scope of delivery:
KL-2000 Spring Compressor
Part No. Description Quantity
KL-2000-100 Cylinder 1
KL-1510 Pair of jaws size 1N 1
KL-1510 Pair of jaws size 2N 1
Technical Data:
Compression length:
Working travel:
Overall length:
Drive:
Max. load:
Breaking point:
45-290 mm
245 mm
410 mm
reversible ratchet or impact wrench
8,500 N
32,000 N
KL-2000 SP
Spring Compressor (not shown)
As KL-2000, but supplied with pairs of jaws with protective inserts.
Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1
(21)
1-15