Changing Springs and Shock Absorbers
Changing Springs and Shock Absorbers
Changing Springs and Shock Absorbers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
KL-0056-1<br />
Universal Tool Set<br />
KL-0056-1<br />
Designed to prevent the damper-rod from rotating while loosening or tightening<br />
the damper piston rod nut on MacPherson Struts <strong>and</strong> Semi-Struts. Allows the<br />
use of a torque-wrench to achieve the correct torque without the risk of the<br />
damper-rod rotating.<br />
Scope of Delivery:<br />
KL-0056-1 Universal Tool Set<br />
Part No. Description Qty. Suitable for:<br />
KL-0056-14 Hex Socket SW14 1 Nissan<br />
KL-0056-16 Hex Socket SW16 1 VW-Audi, Seat, Fiat<br />
KL-0056-17 Hex Socket SW17 1 VW-Audi, Seat, Fiat<br />
KL-0056-18 Hex Socket SW18 1<br />
VW-Audi, Seat, Citroën, Fiat, Opel, Peugeot,<br />
Renault, jap. vehicle<br />
KL-0056-19 Hex Socket SW19 1<br />
VW-Audi, Seat, Citroën, Fiat, Opel, Peugeot,<br />
Renault, jap. vehicle<br />
KL-0056-21 Hex Socket SW21 1 VW-Audi, BMW, Mercedes, Jap. Pkw, Volvo<br />
KL-0056-22 Hex Socket SW22 1<br />
VW-Audi, Seat, Citroën, Fiat, Opel, Peugeot,<br />
Renault<br />
KL-0056-27 Hex Socket SW27 1 VW-Audi, Citroën, Peugeot<br />
KL-0056-43 Hex Insert 9 mm 1 Opel<br />
KL-0056-45 Hex Insert 11 mm 1 jap. vehicle<br />
KL-0056-51 Allen Key 6 mm 1<br />
BMW, Seat, Fiat, Citroën, Peugeot, Opel,<br />
Renault, jap. vehicle<br />
KL-0056-52 Allen Key 7 mm 1<br />
VW-Audi, Seat, Fiat, Citroën, Mercedes,<br />
Peugeot, Renault<br />
KL-0056-53 Allen Key 8 mm 1 Mercedes<br />
KL-0056-60 Insert Slit 3 mm 1 Opel, Renault<br />
KL-0056-61 Insert Slit 3,5 mm 1 Citroën, Peugeot<br />
KL-0056-62 Insert Slit 4 mm 1 Citroën, Peugeot<br />
KL-0056-70 Double Flat 4 mm 1 Nissan<br />
KL-0056-71 Double Flat 5,2 mm 1 VW-Audi, Nissan<br />
KL-0056-72 Double Flat 6 mm 1 VW-Audi, Renault<br />
KL-0056-73 Double Flat 6,3 mm 1 Nissan<br />
KL-0056-74 Double Flat 7 mm 1 VW-Audi, Seat, Fiat<br />
KL-0056-75 Double Flat 8 mm 1 Seat, Fiat<br />
KL-0056-76 Double Flat 9 mm 1 jap. vehicle, Volvo<br />
KL-0056-77 Double Flat 10 mm 1 Seat, Fiat<br />
KL-0056-78 Double Flat 12 mm 1 Seat, Fiat<br />
KL-0056-81 Single Flat ”D“ 5 mm 1 Nissan<br />
KL-0056-86 Single Flat ”D“ 10 mm 1 Nissan<br />
KL-0056-96 Insert XZN-M12 1 Opel<br />
KL-0056-1020 Plastic Storage Case 1<br />
KL-0056-24<br />
Special Hexagon Socket Size (width across flats) 24 mm<br />
KL-0056-24<br />
Suitable for Opel Astra 2009 onwards, Omega etc.<br />
Designed to loosen or tighten the piston rod nut while at the same time<br />
preventing the damper piston rod from rotating. Used with an insert of the<br />
KL-0056-.. Series, for example on MacPherson strut suspensions.<br />
KL-0056-50<br />
Insert Size (width across flats) 5 mm hex<br />
KL-0056-50<br />
Designed to prevent the damper-rod from rotating while loosening or tightening<br />
the damper piston rod nut. Used with a special socket of the KL-0056-.. Series,<br />
for example on MacPherson Struts <strong>and</strong> Semi-Struts.<br />
KL-0056-35<br />
KL-0056-37<br />
Insert Torx® T40<br />
KL-0056-35<br />
Insert Torx® T50<br />
KL-0056-37<br />
Suitable for Porsche Cayenne, VW Touareg etc.<br />
Designed to prevent the damper piston rod from rotating while loosening or<br />
tightening the damper piston rod nut. Used with a special socket of the<br />
KL-0056-.. Series, for example on MacPherson Struts <strong>and</strong> Semi-Struts.<br />
® = reg. trademark of Acument Intellectual Properties, LLC. USA<br />
Suitable for Vauxhall/Opel Astra 2009 onwards, Volvo XC90 etc.<br />
Designed to prevent the damper piston rod from rotating while loosening or<br />
tightening the damper piston rod nut. Used with a special socket of the<br />
KL-0056-.. Series, for example on MacPherson Struts <strong>and</strong> Semi-Struts.<br />
® = reg. trademark of Acument Intellectual Properties, LLC. USA<br />
1-26<br />
(32) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1
Change language