Practical throughout Accessories for your Crafter. - Volkswagen ...

individual lashing point
This individual lashing point is used for professional load
securing within the Crafter. It is provided for mounting on
the tensioning rods. 1 set = 2 pieces.
Art. No. 2E0 017 240
tie down fitting
The tie down fitting is to ensure your cargo is always securely
fixed within the cargo space. Your load can be simply fixed
to the lashing rails or to the individual lashing point on the
tensioning rod. 1 set = 4 pieces.
Art. No. 2E0 017 242
tie down straps with integral lashing eyes
The tie down straps are used to secure large, heavy loads to the
lashing rails in the cargo space. The lashing eyes are inserted via
the ratchet mechanism in the rails, without you having to loosen
the belt. Finally the load is easily secured using the tie down belt
using the ratchet tightening lock or the clamping lock. Suitable
for factory fitted lashing rails or lashing rails in the floor boards.
Art. No. 2E0 017 243 Tie down belt with clamping lock,
incl. two lashing eyes (figure left)
Art. No. 2E0 017 244 Tie down belt with ratchet tightening lock,
incl. two lashing eyes (figure right)
square holder
Using this Volkswagen load securing device, cargo is always
securely held in the cargo space. Typically the square holder
can be used to ensure that pallets or wood loads are easily
and professionally locked. The square holder is provided with
an easy to use pulling ring and slides easily along the lashing rail.
1 set = 2 pieces.
Art. No. 2E0 017 241 A