Rexroth SYNAX 200 Modular system solution for ... - Bosch Rexroth

9
Precision without wear
– electronic gears
Without mechanical limits
– electronic cams
Highest precision – the
integrated register control
Mechanical gearboxes are replaced
by SYNAX 200 highest precision
electronic gears. Mechanical processes
are standardized and the
functionality of machine modules
increased accordingly. You are able
to handle a large number of format
variations without mechanical
modifications, e.g. by the quick
setting of longitudinal registers
with maximum resolution.
Non-uniform relationships
between the master axis and
individual drives are defined by
electronic cams. These cams are
selectable "on-the-fly". Cross cutters
are synchronized for cutting of the
material according to format.
Settings are made by quick and
simple parameter changes.
The integrated register control
automatically corrects the angular
position of an individual drive in
relation to the position of the product.
This eliminates costs for
external register controls or for
additional actuators and special
drives. And helps you to achieve
highest product quality with a
significant reduction in waste.
Get web tension under control
– the tension control
Time is money
– on the fly job change
From reel to reel
– winding control
The integrated tension control
keeps web tension constant in the
material to be printed. Depending
on the actual measured value and
the digital or analog tension setpoint,
SYNAX 200 precisely controls
the tension. External electronic
control devices are no longer
necessary. The highest printing
precision is already guaranteed
at the start of production.
SYNAX 200 makes it possible to
start and run up a module into
angular synchronism with a
machine already operating at production
speed. For the first time,
the quick product change at full
machine speed is possible. This is
an innovative feature in classical
mechanical engineering. Shorter
down and retooling times reduce
the current manufacturing costs.
All functions are integrated for center
driven winders – for winders without
external sensors or for winders
in combination with dancer rolls or
load cells. The winder axes are
controlled according to the setpoint
values. Thanks to the direct processing
of the measured variables and the
integrated diameter calculator, there
are no additional costs for external
winding controllers.