PRODUCT CATALOG - Merkantile

More documents

Recommendations

Info

I/O SYSTEMS > MODBUS DISTRIBUTED I/O SYSTEM > Modbus Process Modules Z-SG STRAIN GAUGE INPUT MODULE/ RS485 MODBUS RTU Input Power Supply Z-SG is a strain gauge signal converter. Measurements taken using the 6-wires or 4-wires technique are available through Modbus- RTU serial protocol or the analog output. Sensitivity from 1 to 64mV/V, settable by DIP-switch for integer values, via software for real/integer values. Stable weight indication via Modbus register/digital output. Remote writing of the tare in volatile and/or non-volatile memory by digital input/Modbus register/Modbus commands. TECHNICAL SPECIFICATIONS General Data Power supply 10..40 Vdc / 19..28 Vac / 50-60 Hz Power consumption 2,0 W Isolation 1.500 Vac (4 way) Power transducers - Status Indicators Power supply, error, data transmission, data reception Protection Degree IP20 Operating Temperature -10..+65 °C Dimension (W x H x D) 17.5 x 100 x 112 mm Mounting 35 mm DIN rail guide Communication, Memory Process Interface 2 wire RS485 Speed Up to 57.600 bps (RS485) 2.400 bps (RS232) Protocol ModBUS RTU slave Communication Time < 20 ms (@ 38400 baud) Distance Up to 1.200 m Connectivity Max 32 nodes Data Memory EEPROM for the configuration parameters Signals Channel Numbers 1 Input 6-wire bridge connections, lowest value 87 Ω suitable for 1..4 loadcells (350 Ω) or 1..8 loadcells (1000 Ω) Programming DIP switches Software Standard Baud rate, address, sensitivity, output EASY Z-SG (plug&play free software) Approval CE, RINA Norms EN 61000-6-4/2002, EN 61000-6-2/2002, EN 61010, EN 60742 APPLICATION NOTE ORDER CODES Code Z-SG Description Strain gauge input module/ RS485 ModBUS RTU , 10..40 Vdc / 19..28 Vac ACCESSORIES & SOFTWARE Z-PC-DIN Z-SUPPLY EASY SETUP SG-EQ4 Backplane for power & bus communication Switching power supply SIMILAR <strong>PRODUCT</strong>S Plug&Play configuration software Load cell connection and equalization system pg. 36 pg. 36 pg. 36 - ZC-SG Strain gauge input module/ CANopen pg. 35 22
I/O SYSTEMS > MODBUS DISTRIBUTED I/O SYSTEM > ModBUS Network Analyzers Z203-1 Z204 S203T S203TA TECHNICAL SPECIFICATIONS Single phase network analyzer // RS485 ModBUS RTU AC/DC Voltage converter (1000 Vac/Vdc) to DC current/voltage isolator/converter - RS485 Modbus RTU Advanced 3-phase network analyzer // RS485 (input from special CT) Advanced 3-phase network analyzer // RS485 (input up to 5 Arms) ORDER CODES Model Z203-1 Z204 S203T S203TA Accessories Page 36 Page 36 TA15 (Curr. Transformer f.s. 15 A, prec. 0,1%) TA25 (Curr. Transformer f.s. 25 A, prec. 0,1%) TA100 (Curr. Transformer f.s. 100 A, prec. 0,1%) General Data Power supply 10..40 Vdc, 19..28 Vac 50..60 Hz 10..40 Vdc / 19..28 Vac 10..40 Vdc, 19..28 Vac 50..60 Hz 10..40 Vdc, 19..28 Vac 50..60 Hz Power Consumption 2 W 1,0 W 2 W 2 W Isolation 3.750 Vac (from/to power) 4000 Vac between input and power 3.750 Vac (from/to power) 3.750 Vac (from/to power) 1500 Vac (other circuits) supply/output ports. 1500 Vac (other circuits) Status Indicator Power supply, error, data Power supply, fail, RS485 Power supply, error, data transmission, data reception communication transmission, data reception Protection Degree IP20 IP20 IP20 IP20 Operating Temperature -10..+65 °C - 20..+65 °C -10..+65 °C -10..+65 °C Dimension (W x H x D) 17.5 x 100 x 112 mm 17.5 x 100 x 112 mm 105 x 89 x 60 mm 105 x 89 x 60 mm Weight About 140 g About 140 g About 160 g About 160 g Enclosure Connections Nylon 6 with 30% glass-fiber, V0 selfextinguished class extinguished class Nylon 6 with 30% glass-fiber, V0 self- Plastic Material UL V0 Removable terminal block, max wire Removable terminal block, max wire size 2,5 mm 2 Rear IDC10 connector size 2,5 mm 2 Rear IDC10 connector for Z-PC backplane for Z-PC backplane 1500 Vac (other circuits) Power supply, error, data transmission, data reception Plastic Material UL V0 Mounting 35 mm DIN rail guide 35 mm DIN rail guide 35 mm DIN rail guide 35 mm DIN rail guide Communication Interface 2 wire RS485 RS232, front jack, speed 2400 Baud, data bits 8, Parity: NO, Stop bits:1 2 wire RS485 RS232, front jack, speed 2400 Baud, data bits 8, Parity: NO, Stop bits:1 2 wire RS485 RS232, front jack, speed 2400 Baud, data bits 8, Parity: NO, Stop bits:1 2 wire RS485 RS232, front jack, speed 2400 Baud, data bits 8, Parity: NO, Stop bits:1 Speed Up to 115 kbps Up to 115 kbps Reading every 25 ms Reading every 25 ms Protocol ModBUS RTU slave ModBUS RTU slave ModBUS RTU slave ModBUS RTU slave Communication Time < 10 ms (38400 baud) < 10 ms (38400 baud) Distance Up to 1.200 m Up to 1.200 m Up to 1.200 m Up to 1.200 m Connectivity Max 32 nodes Max 32 nodes Max 32 nodes Max 32 nodes Signals Channel Numbers 1 input, 1 output 1 input, 1 output 1 input, 1 output 1 input, 1 output Type Voltage: up to 500 Vac (50 or 60 Hz) Current: 5 Arms, Max peak factor: 3, Max Current : 15A, ( 50 or 60 Hz) Analog retransmission of : Vrms, Irms, P, Q, cosΦ Voltage Input: 0..300, 0..600, 0…1000 Vac/Vdc Voltage Output 0..10V, Min load resistance: 2.500 Ω Current Output 2 scales: 0/4..20 mA (active/passive) Max load resistance: 600 Ω Voltage input: Max=600 Vac, frequency 50 or 60Hz Current Input: up to 100 mA (from CT) Measures values (single phase or three phases): Vrms, Irms, Watt (bidirectional), Var, VA, Frequency, cosΦ, Energy (bidirectional) Analog retransmission (voltage / current) Accuracy 0,5% 0,5% 0,2% 0,2% Programming DIP switches Dip- switches (address, baud rate, Dip- switches (address, baud rate, Dip- switches (address, baud rate, line termination and input range) line termination and input range) line termination and input range) Software Easy Suite Easy Suite Easy Suite Easy Suite Standard Approvals UL-UR, CE CE CE CE Norms EN50081-2, EN 55011, EN 50082-2, EN 61000-2-2/4, EN 50140/141, EN 61010-1, EN 60742 EN 61000-6-4 (2007) EN 61000-6-2 (2006) EN 61010-1 (11-2001) EN 61000-6-4/2002, EN 61000-6- 2/2002, EN 61010, EN 60742 Voltage input: Max=600 Vac, frequency 50 or 60Hz Current Input: up to 5 Aac Measures values (single phase or three phases): Vrms, Irms, Watt (bidirectional), Var, VA, Frequency, cosΦ, Energy (bidirectional) Output retransmission (voltage / current Dip- switches (address, baud rate, line termination and input range) EN 61000-6-4, EN 61000-6-2, EN 61010-1, EN 60742 23
Page 1 and 2: www.seneca.it PRODUCT CATALOG
Page 3 and 4: PRODUCT CATALOG/INDEX 1 2 3 4 I/O M
Page 5: PRODUCT CATALOG/INDEX 7.3 Temperatu
Page 8 and 9: I/O ModBUS SYSTEMS Z-PC LINE Z-PC L
Page 10 and 11: I/O SYSTEMS> MODBUS DISTRIBUTED I/O
Page 18 and 19: I/O SYSTEMS > MODBUS DISTRIBUTED I/
Page 26 and 27: I/O SYSTEMS > CANOPEN DISTRIBUTED I
Page 38 and 39: CPU > MULTIFUNCTION CONTROL UNITS >
Page 40 and 41: CPU > MULTIFUNCTION CONTROL UNITS >
Page 42 and 43: 1 2 3 COMMUNICATION INTERFACES> ETH
Page 44 and 45: COMMUNICATION INTERFACES> ETHERNET
Page 46 and 47: COMMUNICATION INTERFACES> A/D CONVE
Page 48 and 49: COMMUNICATION INTERFACES> SERIAL CO
Page 56 and 57: COMMUNICATION INTERFACES > Fiber Op
Page 58 and 59: COMMUNICATION INTERFACES > Wireless
Page 60 and 61: HMI- Displays > OLED DISPLAY WITH M
Page 62 and 63: HMI- Displays > OLED DISPLAY WITH M
Page 65 and 66: RTU, REMOTE TERMINAL UNITS 6 RTU, R
Page 67 and 68: INTEGRATED SOLUTION ALL-IN-ONE REMO
Page 69 and 70: RTU, REMOTE TERMINAL UNITS > M-RTU-
Page 71 and 72: READY-TO-USE A DIGITAL CONTACTS REM
Page 73:
APPLICATIONS AUTOMATICALLY OPENING
Page 76 and 77:
Z-LINE > MULTI-STANDARD SIGNAL CONV
Page 78 and 79:
CONVERTERS & INTERFACES > MULTI-STA
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
K-LINE > COMPACT SIGNAL CONVERTERS
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
CONVERTERS & INTERFACES > COMPACT S
Page 114 and 115:
CONVERTERS & INTERFACES > COMPACT S
Page 116 and 117:
LOOP POWERED DEVICES > Temperature
Page 118 and 119:
LOOP POWERED DEVICES > Current Tran
Page 120 and 121:
120
Page 122 and 123:
DISPLAYS AND PANEL MOUNTING UNITS H
Page 124 and 125:
DISPLAYS AND PANEL MOUNTING UNITS S
Page 126 and 127:
DISPLAYS AND PANEL MOUNTING UNITS S
Page 128 and 129:
128
Page 130 and 131:
POWER DEVICES HANDHELD METER
Page 132 and 133:
POWER DEVICES S203TA Up to 6
Page 134 and 135:
POWER DEVICES > Z-LINE AC POWER CON
Page 136 and 137:
POWER DEVICES > Z-LINE AC POWER CON
Page 138 and 139:
PHOTOVOLTAIC COMPONENTS SENECA MODU
Page 140 and 141:
S PWR ERR COM RX TX 4 5 6 PHOTOVOLT
Page 142 and 143:
PHOTOVOLTAIC COMPONENTS COMPONENTS
Page 144:
www.seneca.it CONTACT AND INFORMATI
show all

PRODUCT CATALOG - Merkantile

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?