PRODUCT CATALOG - Merkantile

More documents

Recommendations

Info

COMMUNICATION INTERFACES> SERIAL CONVERTERS S107P RS232↔ RS232 19..40 Vdc / 19..28 Vac Power Supply RS485 / RS422 S107P allows a transparent conversion and isolation of RS485/ RS422 serial line into RS232 and viceversa. The RS485 and RS422 interfaces are available on terminals. The RS232 through a cable with DB9 female connector (included). 230V network power supply included into the box. TECHNICAL SPECIFICATIONS General Data Power supply Power consumption Isolation Power transducers 9..12 Vdc (with feeder 220 Vac) 1 W 1.500 Vac (3 way) Status Indicators IP20 Protection Degree 0..+55 °C Operating Temperature 17.5 x 100 x 112 mm Dimension (W x H x D) 200 g Enclosure ABS Power supply, RST signal status, data transmission, data reception Communication, Memory Process S107P Interface RS232, DB9 connector RS485/RA422, extractable clamps 5 poles Screw connection Operating ways 2 wires Half Duplex, point to point, multidrop Direction change Automatic timing, command from RTS on RS232 interface Speed Up to 115 kbps Protocol ModBUS RTU slave Distance Up to 1.200 m Configurations DIP switches Standard Approvals Norms Speed, communication, change of direction RINA, CE EN 50081-2, EN 55011, EN 50082-2, EN 61000-2-2/4, EN 50140/141, EN 61010-1, EN 60742 ORDER CODES Code S107P SIMILAR <strong>PRODUCT</strong>S Description RS232 - RS485/422 serial converter, portable version, 19..40 Vdc / 19..28 Vac S117P1 Z107 S107USB RS232/USB, TTL/ USB, RS485/USB asynchronous serial converter DIN rail RS232 - RS485/422 serial converter RS485/USB serial converter, portable version RS485↔USB serial converter pg. 51 pg. 47 pg. 49 pg. 54 48
COMMUNICATION INTERFACES> SERIAL CONVERTERS S107USB USB↔ RS485 USB S107USB is an interface able to implement a RS485 serial port by using a PC USB port. The available drivers will recognize the serial interface as a standard serial port; so the use of the product is directly allowed through any software able to communicate with the standard serial ports of the operating system (COM1, COM2, etc). RS485 and USB ports are isolated from each other at 1500 V. TECHNICAL SPECIFICATIONS General Data Power supply Power consumption Isolation Status Indicators Through USB port 60 mA 1.500 Vac (2 way) Protection Degree IP20 Operating Temperature 0..+55°C Dimension (W x H x D) 40 x 48 x 20,17 mm X-SIDE SERIAL Y-SIDE USB Special Functions Operating system Driver Standard Approvals Norms Power supply, data transmission, data reception RS485, line termination and speed (from 1.200 bps a 250 kbps) settable USB 1.0 e 2.0, connectors USB A e MINI USB B, multiple connection on the same PC Usable in Windows 98, 2000 and XP Environments. Usable in Linux Environment with Kernel 2.4.20 or later, for which the direct support exists. With to the provided driver, the serial interface is considered by the operating system as a standard serial port; therefore the use of the product is directly allowed through any software able to communicate with the standard serial ports of the operating system (COM1, COM2, etc). CE EN 50081-2, EN 55011, EN 50082-2, EN 61000-2-2/4, EN 50140/141, EN 61010-1, EN 60742 APPLICATION NOTE ORDER CODES Code S107USB SIMILAR <strong>PRODUCT</strong>S S117P1 Z107 S107P RS232/USB, TTL/ USB, RS485/USB asynchronous serial converter Description USB↔RS485 serial converter (desk version), drivers and cable included DIN rail RS232 - RS485/422 serial converter RS485↔USB serial converter RS232↔RS485/422 serial isolator/ converter (desk) pg. 51 pg. 47 pg. 54 pg. 48 49
Page 1 and 2: www.seneca.it PRODUCT CATALOG
Page 3 and 4: PRODUCT CATALOG/INDEX 1 2 3 4 I/O M
Page 5: PRODUCT CATALOG/INDEX 7.3 Temperatu
Page 8 and 9: I/O ModBUS SYSTEMS Z-PC LINE Z-PC L
Page 10 and 11: I/O SYSTEMS> MODBUS DISTRIBUTED I/O
Page 18 and 19: I/O SYSTEMS > MODBUS DISTRIBUTED I/
Page 26 and 27: I/O SYSTEMS > CANOPEN DISTRIBUTED I
Page 38 and 39: CPU > MULTIFUNCTION CONTROL UNITS >
Page 40 and 41: CPU > MULTIFUNCTION CONTROL UNITS >
Page 42 and 43: 1 2 3 COMMUNICATION INTERFACES> ETH
Page 44 and 45: COMMUNICATION INTERFACES> ETHERNET
Page 46 and 47: COMMUNICATION INTERFACES> A/D CONVE
Page 50 and 51: COMMUNICATION INTERFACES> SERIAL CO
Page 56 and 57: COMMUNICATION INTERFACES > Fiber Op
Page 58 and 59: COMMUNICATION INTERFACES > Wireless
Page 60 and 61: HMI- Displays > OLED DISPLAY WITH M
Page 62 and 63: HMI- Displays > OLED DISPLAY WITH M
Page 65 and 66: RTU, REMOTE TERMINAL UNITS 6 RTU, R
Page 67 and 68: INTEGRATED SOLUTION ALL-IN-ONE REMO
Page 69 and 70: RTU, REMOTE TERMINAL UNITS > M-RTU-
Page 71 and 72: READY-TO-USE A DIGITAL CONTACTS REM
Page 73: APPLICATIONS AUTOMATICALLY OPENING
Page 76 and 77: Z-LINE > MULTI-STANDARD SIGNAL CONV
Page 78 and 79: CONVERTERS & INTERFACES > MULTI-STA
Page 98 and 99:
CONVERTERS & INTERFACES > MULTI-STA
Page 100 and 101:
K-LINE > COMPACT SIGNAL CONVERTERS
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
CONVERTERS & INTERFACES > COMPACT S
Page 114 and 115:
CONVERTERS & INTERFACES > COMPACT S
Page 116 and 117:
LOOP POWERED DEVICES > Temperature
Page 118 and 119:
LOOP POWERED DEVICES > Current Tran
Page 120 and 121:
120
Page 122 and 123:
DISPLAYS AND PANEL MOUNTING UNITS H
Page 124 and 125:
DISPLAYS AND PANEL MOUNTING UNITS S
Page 126 and 127:
DISPLAYS AND PANEL MOUNTING UNITS S
Page 128 and 129:
128
Page 130 and 131:
POWER DEVICES HANDHELD METER
Page 132 and 133:
POWER DEVICES S203TA Up to 6
Page 134 and 135:
POWER DEVICES > Z-LINE AC POWER CON
Page 136 and 137:
POWER DEVICES > Z-LINE AC POWER CON
Page 138 and 139:
PHOTOVOLTAIC COMPONENTS SENECA MODU
Page 140 and 141:
S PWR ERR COM RX TX 4 5 6 PHOTOVOLT
Page 142 and 143:
PHOTOVOLTAIC COMPONENTS COMPONENTS
Page 144:
www.seneca.it CONTACT AND INFORMATI
show all

PRODUCT CATALOG - Merkantile

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?