C i r c u i t B a r ® - Industrial and Bearing Supplies

C i r c u i t B a r
®

CIRCUIT BAR ®
CIRCUIT BAR ® is an extruded block of aluminum with pneumatic circuits machined right in the bar.
The design of these circuits can be very simple or complex depending upon the requirements of the
application.
CIRCUIT BAR ® are a means by which individual components (i.e. valves, regulators and flow controls)
comprising a circuit, can be combined into one extruded CIRCUIT BAR ® . The CIRCUIT BAR ® will eliminate
extra piping and fittings, as well as saving space and money.
Contact your local MAC distributor for more information as to how MAC’S CIRCUIT BAR ® can satisfy
your needs.
Introduction
Section 1 Direct solenoid and solenoid pilot operated valves
Consult “Precautions” before use, installation or service of MAC Valves.

Introduction
Let us show you via high performance demonstration kits and animated software,
HOW MAC’S PERFORMANCE ADVANTAGES HELP MAKE YOUR
EQUIPMENT MORE RELIABLE - FASTER - MORE REPEATABLE.
TLD
Traveling Lab Demonstration measures critical valve
performance characteristics - Shifting forces,
Response Time, Speed, Repeatability and Flow.
PLD
Proportional Lab Demonstration measures critical
proportional regulation characteristics - Response
Time, Accuracy, Hysterisis, Repeatability and Flow.
Animation
Animated Software shows inner workings of various
Air Valves Designs - Powerful educational tool for
learning about how air valves function.
Consult “Precautions” before use, installation or service of MAC Valves.

Product range
3-way solenoid operated valves
#10-32 to 2 1/2” port size Cv .10 to 65.0
4-way solenoid operated valves
#10-32 to 1 1/2” port size Cv .10 to 15.9
Proportional pressure control valves
Stand alone or Multi-Pressure Pak ®
Analog or Digital with an overall accuracy range of ±.5% to ±2.5% of full scale
Field bus products
Communication Electronics with a variety of MAC Valves’ products
Input and Output capability with a variety of protocols
Consult “Precautions” before use, installation or service of MAC Valves.

Section 1 Direct solenoid and solenoid pilot operated valves
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Function Port size Flow (Max) C v Circuit bar mounting Series
non plug-in
cylinder ports
in base
non plug-in
cylinder ports
in valve
plug-in
plug-in
with F. C.
plug-in
with Pr. Reg.
plug-in
with Pr. Reg.
and F. C.
add-on style
plug-in
add-on style
plug-in
with F. C.
add-on style
plug-in
with Pr. Reg.
3/2
M5 - #10-32
0.11
3/2
3/2
#10-32 - 1/8”
M5 - #10-32
0.11
0.10
34
3/2
M5 - #10-32
0.09
3/2
1/8” NPTF - #10-32 UNF
0.10
35
3/2
1/4” - 3/8”
0.5
3/2
1/8” - 1/4”, 6mm tube receptacle
0.5
37
3/2
1/8” - 1/4”
0.5
5/2 - 3/2
M5 - #10-32
0.093
5/2 - 3/2
#10-32 - 1/8”
0.093
5/2 - 3/2
M5 - #10-32
0.09
44
5/2 - 3/2
M5 - #10-32
0.08
5/2 - 3/2
M5 - #10-32
0.07
4/2
1/8” NPTF - #10-32 UNF
0.10
45
5/2
5/2
1/8” - 1/4”, 6mm tube receptacle
1/8” - 1/4”
0.5
0.5
47
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Function Port size Flow (Max) C v Circuit bar mounting Series
add-on style
plug-in
with Pr. Reg.
and F. C.
plug-in
add-a-unit
stations
plug-in
add-a-unit
stations
with F. C.
plug-in
add-a-unit
stations
with Pr. Reg.
plug-in
add-a-unit
stations with
F. C. and Pr. Reg.
plug-in with
pre-wired
connector
plug-in
with F. C. and
pre-wired
connector
plug-in
with Pr. Reg.
and pre-wired
connector
din rail,
plug-in with
pre-wired
connector
3/2
M5 - #10-32
0.10
3/2
M5 - #10-32
0.09
34
3/2
M5 - #10-32, 4mm tube receptacle
0.11
3/2
3/2
1/8” - 1/4”, 6mm tube receptacle
1/8” - 1/4”
0.5
0.5
37
5/2 - 3/2
M5 - #10-32
0.09
5/2 - 3/2
M5 - #10-32
0.07
5/2
5/2
M5 - #10-32
M5 - #10-32
0.09
0.08
44
5/2
M5 - #10-32
0.07
5/2 - 3/2
M5 - #10-32, 4mm tube receptacle
0.10
5/2
5/2
1/8” - 1/4”, 6mm tube receptacle
1/8” - 1/4”
0.5
0.5
47
Function Port size Flow (Max) C v Circuit bar mounting Series
din rail,
plug-in with F. C.
and pre-wired
connector
non plug-in
non plug-in
with Pr. Reg.
plug-in
with side
Pr. Reg.
plug-in
with integral
terminal strip
plug-in with
integral
terminal strip
and side Pr. Reg.
non plug-in
cylinder ports
in base with
Pr. Reg.
non plug-in
add-on style
cylinder ports
in base
non plug-in
add-a-unit
stations
3/2
M5 - #10-32, 4mm tube receptacle
0.11
34
3/2
1/8” NPTF - #10-32 UNF
0.10
35
3/2
1/8” - 1/4”, 6mm tube receptacle
0.5
37
4/2
1/8” NPTF - #10-32 UNF
0.10
45
5/2
1/8” - 1/4”, 6mm tube receptacle
0.5
47
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Function Port size Flow (Max) C v Circuit bar mounting Series
cylinder ports
in valve
add-on style
cylinder ports
in valve
cylinder ports
in base
add-on style
cylinder ports
in base
add-a-unit
stations for
CBM052A bar
add-a-unit
stations for
CBP052A bar
non plug-in
with or
without F. C.
non plug-in
with Pr. Reg.
and F. C.
plug-in
with sandwich
Pr. Reg.
3/2
1/8” - 1/4”
1.2
52
4/2
1/8” NPTF - #10-32 UNF
0.10
45
5/2 - 5/3
1/4”
1.3
800
Function Port size Flow (Max) C v Circuit bar mounting Series
plug-in with
integral terminal
strip and
sandwich Pr. Reg.
plug-in with
integral
terminal strip
with F. C.
plug-in with
integral terminal
strip with
Pr. Reg. and F. C.
non plug-in
cyl. ports in
valve with
opt. F. C.
non plug-in
cyl. ports in
base with
opt. F. C.
add-on style
non plug-in cyl.
ports in valve
with opt. F. C.
add-on style
non plug-in cyl.
ports in base
with opt. F. C.
non plug-in
cyl. ports
in valve with
opt. Pr. Reg.
add-on style
non plug-in
cyl. ports
in base
4/2
1/8” NPTF - #10-32 UNF
0.10
45
5/2
5/2
3/8”
1/8” - 1/4”, 6mm tube receptacle
0.5
0.5
47
Function Port size Flow (Max) C v Circuit bar mounting Series
add-on style
non plug-in cyl.
ports in base
with Pr. Reg.
low profile
cylinder ports
in valve
low profile
cylinder ports
in base
mid profile
cylinder ports
in valve
mid profile -
add on style
cylinder ports
in valve
add-a-unit
stations for
CBM403A bar
mid profile
cylinder ports
in base
mid profile -
add on style
cylinder ports
in base
add-a-unit
stations for
CBM404A bar
5/2
1/8” - 1/4”, 6mm tube receptacle
0.5
47
5/2 - 5/3
5/2 - 5/3
1/8” - 1/4”
1/8”
1.0
1.0
400
Function Port size Flow (Max) C v Circuit bar mounting Series
high profile
cylinder ports
in base
high profile -
add on style
cylinder ports
in base
add-a-unit
stations for
CBM405A bar
standard
add-on style
add-a-unit
stations for
CBM092B
with shut-off
valve
5/2 - 5/3
1/8” - 1/4”
1.0
400
5/2 - 5/3 - 3/2
1/8 - 1/4 - 3/8
1.0
92
5/2 - 5/3
1/4”
1.3
800
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Circuit bar mounting
non plug-in
cylinder ports
in base
non plug-in
cylinder ports
in valve
plug-in
plug-in
with F. C.
plug-in
with Pr. Reg.
plug-in
with Pr. Reg.
and F. C.
add-on style
plug-in
add-on style
plug-in
with F. C.
add-on style
plug-in
with Pr. Reg.
add-on style
plug-in
with Pr. Reg.
and F. C.
plug-in
add-a-unit
stations
plug-in
add-a-unit
stations
with F. C.
plug-in
add-a-unit
stations
with Pr. Reg.
plug-in
add-a-unit
stations with
F. C. and Pr. Reg.
plug-in with
pre-wired
connector
plug-in with
F. C. and
pre-wired
connector
plug-in with
Pr. Reg. and
pre-wired
connector
din rail,
plug-in with
pre-wired
connector
din rail,
plug-in with
F. C. and prewired
connector
Manual operator
Armature
Coil
Push pin
Poppet
“D” seal
Valve spring
SERIES FEATURES
• High force MACSOLENOID ® .
• Universal porting.
• #10-32 or M5 ports.
• Rated for lubricated or non-lubricated service.
• 10mm direct operated.
• Cylinder port in valve or in circuit bar.
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.11C v
non plug-in
cylinder ports
in base
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-Gxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Pressure range : 0 to 120 PSI
1 3
34B-LOO-GXXX-XXX
1 3
34B-NOO-GXXX-XXX
SOLENOID OPERATOR ➤
G XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
A 18”
1 Non-locking
KA
Mini connector
DD 24VDC (2.5 W)
C 36”
KT
Mini connector
with light
DF 24VDC (4.0 W)
xx Other Options
x
Other Options
BA
BT
xx
Flying leads
Flying leads with light
Other Options
HOW TO ORDER CIRCUIT BAR
Port size
EBP34B-xxxx-xx
Side cylinder ports
Bottom cylinder ports
M5
# 10-32
EBP34B-001D-XX
EBP34B-001B-XX
EBP34B-002D-XX
EBP34B-002B-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
1.8 mm
4 W : 0.11C v , 2.5 W : 0.084C v , 1.8 W : 0.061C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 3.4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Isolation of inlet and/or exhaust. Special bar. Consult factory.
DIMENSIONS
1/8” - NPT PORTS 1 & 3
EACH END
59,0
52,0
C L C L C L
2
1
6,0
22,0
12,5
3
7,5
2,0
10,5 18,0
4,5
4,0
14,5
12,5
14,0
34,0
18,0
34,0
OPTIONAL BOTTOM
PORTS
18,0
4,5
4,2 DIA.
MOUNTING HOLES
4,0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size (Inlet & Exhaust) Flow (Max) Circuit bar mounting
3/2 NO-NC # 10-32 - 1/8“ 0.11C v
non plug-in
cylinder ports
in valve
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-Gxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Valve port size
Universal valve
NC only valve
2
2
M5
# 10-32
1 3
34B-ABA-GXXX-XXX
34B-AAA-GXXX-XXX
1 3
34B-ABB-GXXX-XXX
34B-AAB-GXXX-XXX
SOLENOID OPERATOR ➤
G XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
A 18”
1 Non-locking
KA
Mini connector
DD 24VDC (2.5 W)
C 36”
KT
Mini connector
with light
DF 24VDC (4.0 W)
xx Other Options
x
Other Options
BA
BT
xx
Flying leads
Flying leads with light
Other Options
HOW TO ORDER CIRCUIT BAR
EBM34A-xxxx-xx
Port size
COMMON INLET & EXHAUST
# 10-32
1/8” NPTF
EBM34A-001B-XX
EBM34A-002A-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.11C v , 2.5 W : 0.084C v , 1.8 W : 0.061C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 3.4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve fastening kit : M34001-01 (1/8” Bar); M34001-21 (#10-32 Bar) • Blanking plate : 30456-A.
• Isolation of inlet and/or exhaust. Special bar. Consult factory.
DIMENSIONS
19,0
2
B
1
3
A
G
D
10,5
E
14,0
F
C
38,5
Port size
A
B
C
D
E
F
G
1/8”
16.0
47.5
57.4
8.0
23.0
31.0
8.0
M5
12.0
43.5
51.5
9.0
18.0
26.0
6.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.10C v plug-in
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR
ECD034B-00xxx-AOxx
Port size
Side cylinder ports
(10.5 mm)
Bottom cylinder ports
(10.5 mm)
M5
ECD034B-001AD-AOXX
ECD034B-002AD-AOXX
# 10-32
ECD034B-001AB-AOXX
ECD034B-002AB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector option (9, 15 or 25).
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
L
32.0
TYP
20.0
8.3
TYP
29.5
14.7
TYP
3
TYP
83.8
57.2
1
77.0
TYP
2 2 2 2
23.3
10.5
60.80
22.3
25.5
TYP
2 2 2 2
10.0
24.8
10.5
4.5
10.0
20.2
22.5
33.0
21.6
23.9
Number of
stations
DIM. L
2
55.5
3
66.0
4
76.5
5
87.0
6
97.5
7 8 9 10
108.0 118.5 129.0 139.5
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.10C v
plug-in
with F. C.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS
Port size
M5
# 10-32
Side cylinder ports
(10.5 mm)
ECD034B-005AD-AOXX
ECD034B-005AB-AOXX
ECD034B-00xxx-AOxx
Bottom cylinder ports
(10.5 mm)
ECD034B-006AD-AOXX
ECD034B-006AB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector option (9, 15 or 25).
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
L
32.0
TYP
20.0
8.3
TYP
14.7
TYP
29.5
TYP
3
10.2
83.8
57.2
1
77.0
TYP
2 2 2 2
23.3
22.3
34.40
25.8
TYP
10.5
60.80
10.0
24.8
10.5
4.5
10.0
20.2
2 2 2 2
22.5
33.0
21.6
23.9
Number of
stations
DIM. L
2
55.5
3
66.0
4
76.5
5
87.0
6
97.5
7 8 9 10
108.0 118.5 129.0 139.5
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.10C v
plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR FOR PRESSURE REGULATORS ** (to be ordered separately)
ECD034B-00xxx-AOxx
Port size
M5
# 10-32
Bottom cylinder ports
(10.5 mm)
ECD034B-004AD-AOXX
ECD034B-004AB-AOXX
Side cylinder ports
(10.5 mm)
ECD034B-003AD-AOXX
ECD034B-003AB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector option (9, 15 or 25).
** Pressure Regulators :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Blanking plate for regulator : N-44003. • Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
40.00
L
32.0
TYP
24.8
10.5
20.2
8.3
TYP
144.1
14.7
TYP
29.5
3
2 2 2 2
23.3
TYP
83.8
57.2
1
22.3
77.0
TYP
10.0
4.5
10.0
10.5
20.0
60.80
25.8
TYP
K
C
O
L
- +
K
C
O
L
- +
K
C
O
L
- +
K
C
O
L
- +
2 2 2 2
22.5
33.0
21.6
23.9
Number of
stations
DIM. L
2
55.5
3
66.0
4
76.5
5
87.0
6
97.5
7 8 9 10
108.0 118.5 129.0 139.5
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.09C v
plug-in
with Pr. Reg.
and F. C.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
ECD034B-00xxx-AOxx
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS AND PRESSURE REGULATORS ** (pressure regulators to be ordered separately)
Port size
M5
# 10-32
Bottom cylinder ports
(10.5 mm)
ECD034B-007AD-AOXX
ECD034B-007AB-AOXX
Side cylinder ports
(10.5 mm)
ECD034B-008AD-AOXX
ECD034B-008AB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector option (9, 15 or 25).
** Pressure Regulators :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180. • Blanking plate for regulator : N-44003.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
40.00
L
32.0
TYP
24.8
10.5
20.2
8.3
TYP
144.1
29.5
14.7
TYP
3
2 2 2 2
23.3
TYP
83.8
57.2
1
22.3
77.0
TYP
10.0
4.5
10.0
10.5
20.0
60.80
25.8
TYP
K
C
O
L
- +
K
C
O
L
- +
K
C
O
L
- +
K
C
O
L
- +
2 2 2 2
22.5
33.0
21.6
23.9
Number of
stations
DIM. L
2
55.5
3
66.0
4
76.5
5
87.0
6
97.5
7 8 9 10
108.0 118.5 129.0 139.5
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.10C v
add-on style
plug-in
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR
ECD034B-00xxx-AOxx
Port size
Side cylinder ports
(10.5 mm)
Bottom cylinder ports
(10.5 mm)
M5
ECD034B-001BD-AOXX
ECD034B-002BD-AOXX
# 10-32
ECD034B-001BB-AOXX
ECD034B-002BB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector option (9, 15 or 25).
add-a-unit stations may be added to above bars. Clic here for model numbers.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
L
32.0
20.0
8.3
14.8
29.5
3
83.7
57.2
1
77.0
2 2 2 2
15.0
10.5 16.0
15.5
60.8
23.0
22.3
4.5
10.0
25.3
41.3
10.9
25.8
2 2 2 2
20.2
10.5
22.5
33.0
23.0
25.3
Number of
stations
DIM. L
2
57.0
3
67.5
4
78.0
5
88.5
6
99.0
7 8 9 10
109.5 120.0 130.5 141.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.10C v
add-on style
plug-in
with F. C.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS
Port size
M5
# 10-32
Side cylinder ports
(10.5 mm)
ECD034B-005BD-AOXX
ECD034B-005BB-AOXX
ECD034B-00xxx-AOxx
Bottom cylinder ports
(10.5 mm)
ECD034B-006BD-AOXX
ECD034B-006BB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector option (9, 15 or 25).
add-a-unit stations may be added to above bars. Clic here for model numbers.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
L
32.0
20.0
8.3
14.8
29.5
3
83.7
57.2
1
77.0
2 2 2 2
15.5
15.0
10.5 16.0
60.8
25.8
2 2 2 2
23.0
22.3
4.5
10.0
25.3
41.3
10.9
10.5
20.2
22.5
33.0
23.0
25.3
Number of
stations
DIM. L
2
57.0
3
67.5
4
78.0
5
88.5
6
99.0
7 8 9 10
109.5 120.0 130.5 141.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.10C v
add-on style
plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
ECD034B-00xxx-AOxx
HOW TO ORDER CIRCUIT BAR FOR PRESSURE REGULATORS ** (to be ordered separately)
Port size
M5
# 10-32
Bottom cylinder ports
(10.5 mm)
ECD034B-004BD-AOXX
ECD034B-004BB-AOXX
Side cylinder ports
(10.5 mm)
ECD034B-003BD-AOXX
ECD034B-003BB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector option (9, 15 or 25).
add-a-unit stations may be added to above bars. Clic here for model numbers.
** Pressure Regulators :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180. • Blanking plate for regulator : N-44003.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
32.0
L
20.0
20.2 10.5
41.3
25.3
14.8
29.5
57.2
8.3
1
3
83.7
2 2 2 2
77.0
137.3
10.5
15.0
16.0
15.5
60.8
4.5
22.3
23.0 10.0
10.9
25.8
K
+
O C
L
-
K
+
O C
L
-
K
+
O C
L
-
K
+
O C
L
-
2 2 2 2
22.5
33.0
23.0
25.3
Number of
stations
DIM. L
2
57.0
3
67.5
4
78.0
5
88.5
6
99.0
7 8 9 10
109.5 120.0 130.5 141.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.09C v
plug-in
with Pr. Reg.
add-on style
and F. C.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
ECD034B-00xxx-AOxx
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS AND PRESSURE REGULATORS ** (pressure regulators to be ordered separately)
Port size
M5
# 10-32
Bottom cylinder ports
(10.5 mm)
ECD034B-007BD-AOXX
ECD034B-007BB-AOXX
Side cylinder ports
(10.5 mm)
ECD034B-008BD-AOXX
ECD034B-008BB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector option (9, 15 or 25).
add-a-unit stations may be added to above bars. Clic here for model numbers.
** Pressure Regulators :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Blanking plate for regulator : N-44003. • Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
L
32.0
20.0
20.2
10.5
41.3
25.3
14.8
29.5
57.2
8.3
83.7
1
3
2 2 2 2
77.0
137.3
15.5
23.0
22.3
10.0
4.5
10.9
15.0
10.5 16.0
60.8
25.8
K
C
O
L
- +
K
C
O
L
- +
K
C
O
L
- +
K
C
O
L
- +
2 2 2 2
22.5
33.0
23.0
25.3
Number of
stations
DIM. L
2
57.0
3
67.5
4
78.0
5
88.5
6
99.0
7 8 9 10
109.5 120.0 130.5 141.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.10C v
plug-in
add-a-unit
stations
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR
ECD034B-00xxx-AOxx
Port size
Side cylinder ports
Bottom cylinder ports
M5
ECD034B-001CD-AOXX
ECD034B-002CD-AOXX
# 10-32
ECD034B-001CB-AOXX
ECD034B-002CB-AOXX
Number of stations (03=3 stations) - Maximum length is 4 stations
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
when add-a-unit stations are added to bars with a multi-pin connector,
MOD. SD03 should be included with add-a-unit model number.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
L
32.0
20.0
8.3
14.8
29.5
3
83.7
57.2
1
77.0
2 2 2 2
15.0
10.5 16.0
15.5
60.8
23.0
22.3
4.5
10.0
25.3
41.3
10.9
25.8
2 2 2 2
20.2
10.5
22.5
33.0
23.0
25.3
Number of
stations
DIM. L
2
57.0
3
67.5
4
78.0
5
88.5
6
99.0
7 8 9 10
109.5 120.0 130.5 141.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.10C v
add-a-unit
stations with
plug-in
F. C.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS
Port size
Side cylinder ports
ECD034B-00xxx-AOxx
Bottom cylinder ports
M5
# 10-32
ECD034B-005CD-AOXX
ECD034B-005CB-AOXX
ECD034B-006CD-AOXX
ECD034B-006CB-AOXX
Number of stations (03=3 stations) - Maximum length is 4 stations
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
when add-a-unit stations are added to bars with a multi-pin connector,
MOD. SD03 should be included with add-a-unit model number.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
L
32.0
20.0
8.3
14.8
29.5
3
83.7
57.2
1
77.0
2 2 2 2
15.5
15.0
10.5 16.0
60.8
25.8
2 2 2 2
23.0
22.3
4.5
10.0
25.3
41.3
10.9
10.5
20.2
22.5
33.0
23.0
25.3
Number of
stations
DIM. L
2
57.0
3
67.5
4
78.0
5
88.5
6
99.0
7 8 9 10
109.5 120.0 130.5 141.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.10C v
add-a-unit
stations
plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DD 24VDC (2.5 W)
DF 24VDC (4.0 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR FOR PRESSURE REGULATORS ** (to be ordered separately)
DJ Plug-in
DT Plug-in with light
DE Plug-in with suppression diode
DV Plug-in with light and suppression diode
xx Other Options
ECD034B-00xxx-AOxx
Port size
Side cylinder ports
Bottom cylinder ports
M5
# 10-32
ECD034B-003CD-AOXX
ECD034B-003CB-AOXX
ECD034B-004CD-AOXX
ECD034B-004CB-AOXX
Number of stations (03=3 stations) - Maximum length is 4 stations
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
when add-a-unit stations are added to bars with a multi-pin connector,
MOD. SD03 should be included with add-a-unit model number.
** Regulator ordered separately-see below
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180. • Blanking plate for regulator : N-44003.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
32.0
L
20.0
20.2 10.5
41.3
25.3
14.8
29.5
57.2
8.3
1
3
83.7
2 2 2 2
77.0
137.3
10.5
15.0
16.0
15.5
60.8
4.5
22.3
23.0 10.0
10.9
25.8
K
+
O C
L
-
K
+
O C
L
-
K
+
O C
L
-
K
+
O C
L
-
2 2 2 2
22.5
33.0
23.0
25.3
Number of
stations
DIM. L
2
57.0
3
67.5
4
78.0
5
88.5
6
99.0
7 8 9 10
109.5 120.0 130.5 141.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.10C v
add-a-unit
stations with
plug-in
F. C. and Pr. Reg.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ Plug-in
DD 24VDC (2.5 W)
DT Plug-in with light
DF 24VDC (4.0 W)
DE Plug-in with suppression diode
xx Other Options
DV Plug-in with light and suppression diode
xx Other Options
ECD034B-00xxx-AOxx
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS AND PRESSURE REGULATORS ** (pressure regulators to be ordered separately)
Port size
Side cylinder ports
Bottom cylinder ports
M5
# 10-32
ECD034B-008CD-AOXX
ECD034B-008CB-AOXX
ECD034B-007CD-AOXX
ECD034B-007CB-AOXX
Number of stations (03=3 stations) - Maximum length is 4 stations
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
when add-a-unit stations are added to bars with a multi-pin connector,
MOD. SD03 should be included with add-a-unit model number.
** Regulator ordered separately-see below
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Blanking plate for regulator : N-44003. • Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
L
32.0
20.0
20.2
10.5
41.3
25.3
14.8
29.5
57.2
8.3
83.7
1
3
2 2 2 2
77.0
137.3
15.5
23.0
22.3
10.0
4.5
10.9
15.0
10.5 16.0
60.8
25.8
K
C
O
L
- +
K
C
O
L
- +
K
C
O
L
- +
K
C
O
L
- +
2 2 2 2
22.5
33.0
23.0
25.3
Number of
stations
DIM. L
2
57.0
3
67.5
4
78.0
5
88.5
6
99.0
7 8 9 10
109.5 120.0 130.5 141.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32, 0.11C v
4mm tube receptacle
plug-in with
pre-wired
connector
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR
ECF34B-00xxx-xxxx
Port size
Side cylinder ports
(10.5 mm)
Bottom cylinder ports
(10.5 mm)
M5
ECF34B-00ADA-ZZXX
ECF34B-00BDA-ZZXX
# 10-32
ECF34B-00ABA-ZZXX
ECF34B-00BBA-ZZXX
4 mm tube receptacle
ECF34B-00AEA-ZZXX
---------
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
ZZ Connector
LA 9 Pin Sub D*
LB 15 Pin Sub D*
LC 25 Pin Sub D*
LD 10 Pin Ribbon Cable**
LE 16 Pin Ribbon Cable**
LF 20 Pin Ribbon Cable**
LG 26 Pin Ribbon Cable**
LH 3/8” NPSM Conduit Port
Standard Base Wires
L=Left Side; R=Right Side
ZZ Connector
RA 9 Pin Sub D*
RB 15 Pin Sub D*
RC 25 Pin Sub D*
RD 10 Pin Ribbon Cable**
RE 16 Pin Ribbon Cable**
RF 20 Pin Ribbon Cable**
RG 26 Pin Ribbon Cable**
RH 3/8” NPSM Conduit Port
Standard Base Wires
* MIL. Spec; MIL-C-24308
** MIL. Spec; MIL-C-83503
Note: Left and right end is determined by facing conduit passage.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
72.6
9.0
17.4
16.7
3
37.9
1
20.0
10.5 13.0
5.0
26.8
53.5 2 2 2
51.6
88.7
2
20.2
10.5
10.0
2 2 2
2
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32, 0.11C v
4mm tube receptacle
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
plug-in with
F. C. and
pre-wired
connector
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS
Port size
M5
# 10-32
4 mm tube receptacle
Side cylinder ports
(10.5 mm)
ECF34B-00CDA-ZZXX
ECF34B-00CBA-ZZXX
ECF34B-00CEA-ZZXX
ECF34B-00xxx-xxxx
Bottom cylinder ports
(10.5 mm)
ECF34B-00DDA-ZZXX
ECF34B-00DBA-ZZXX
---------
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
ZZ Connector
LA 9 Pin Sub D*
LB 15 Pin Sub D*
LC 25 Pin Sub D*
LD 10 Pin Ribbon Cable**
LE 16 Pin Ribbon Cable**
LF 20 Pin Ribbon Cable**
LG 26 Pin Ribbon Cable**
LH 3/8” NPSM Conduit Port
Standard Base Wires
L=Left Side; R=Right Side
ZZ Connector
RA 9 Pin Sub D*
RB 15 Pin Sub D*
RC 25 Pin Sub D*
RD 10 Pin Ribbon Cable**
RE 16 Pin Ribbon Cable**
RF 20 Pin Ribbon Cable**
RG 26 Pin Ribbon Cable**
RH 3/8” NPSM Conduit Port
Standard Base Wires
* MIL. Spec; MIL-C-24308
** MIL. Spec; MIL-C-83503
Note: Left and right end is determined by facing conduit passage.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.11C v , 2.5 W : 0.09C v , 1.8 W : 0.06C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
9.0 17.4
16.7
3
80.1
37.9
1
20.0
10.5
13.0
5.0
26.8
53.5
88.7
51.6
2 2
2
2
20.2 10.5
10.0
2
2
2
2
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32 0.10C v
Pr. Reg. and
pre-wired
plug-in with
connector
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR FOR PRESSURE REGULATORS ** (to be ordered separately)
Port size
M5
# 10-32
ECF34B-00xxx-xxxx
Bottom cylinder ports
(10.5 mm)
ECF34B-00EDA-ZZXX
ECF34B-00EBA-ZZXX
Number of stations (03=3 stations)
** Pressure Regulators :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
ZZ
Connector
LA 9 Pin Sub D*
LB 15 Pin Sub D*
LC 25 Pin Sub D*
LD 10 Pin Ribbon Cable**
LE 16 Pin Ribbon Cable**
LF 20 Pin Ribbon Cable**
LG 26 Pin Ribbon Cable**
LH 3/8” NPSM Conduit Port
Standard Base Wires
L=Left Side; R=Right Side
ZZ Connector
RA 9 Pin Sub D*
RB 15 Pin Sub D*
RC 25 Pin Sub D*
RD 10 Pin Ribbon Cable**
RE 16 Pin Ribbon Cable**
RF 20 Pin Ribbon Cable**
RG 26 Pin Ribbon Cable**
RH 3/8” NPSM Conduit Port
Standard Base Wires
* MIL. Spec; MIL-C-24308
** MIL. Spec; MIL-C-83503
Note: Left and right end is determined by facing conduit passage.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10C v , 2.5 W : 0.09C v , 1.8 W : 0.07C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Blanking plate for regulator : N-44003. • Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
132.9
9.0 17.4
16.7
3
1
37.9
20.0
5.0
26.8
53.5
88.7
51.6
2 2
2
2
K
O C
L
K
O C
L
K
O C
L
K
O C
L
2
-
+
-
+
-
+
-
+
10.5
13.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32, 0.11C v
4mm tube receptacle
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
din rail,
plug-in with
pre-wired
connector
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR
ECF34B-00xxx-xxxx
Port size
M5
# 10-32
4 mm tube receptacle
Number of stations (03=3 stations)
Din rail spec. (EN50 022)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
ZZ
Side cylinder ports
(10.5 mm)
ECF34B-00ADB-ZZXX
ECF34B-00ABB-ZZXX
ECF34B-00AEB-ZZXX
Connector
LA 9 Pin Sub D*
LB 15 Pin Sub D*
LC 25 Pin Sub D*
LD 10 Pin Ribbon Cable**
LE 16 Pin Ribbon Cable**
LF 20 Pin Ribbon Cable**
LG 26 Pin Ribbon Cable**
LH 3/8” NPSM Conduit Port
Standard Base Wires
L=Left Side; R=Right Side
ZZ Connector
RA 9 Pin Sub D*
RB 15 Pin Sub D*
RC 25 Pin Sub D*
RD 10 Pin Ribbon Cable**
RE 16 Pin Ribbon Cable**
RF 20 Pin Ribbon Cable**
RG 26 Pin Ribbon Cable**
RH 3/8” NPSM Conduit Port
Standard Base Wires
* MIL. Spec; MIL-C-24308
** MIL. Spec; MIL-C-83503
Note: Left and right end is determined by facing conduit passage.
Consult “Precautions” before use, installation or service of MAC Valves.

2
3
1
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.11C v , 2.5 W : 0.09C v , 1.8 W : 0.06C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
72.6
9.0
17.4
3
16.7
1
37.9
VAC TO 120 PSI
ELECTRICAL WATTS
MODEL
WIXOM,MI.USA
LIEGE,BELGIUM
AUCKLAND,N.Z.
20.0
5.0
MODIF.
53.5
88.7
60.9
20.2
10.5
10.0
2 2 2 2
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 34
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC M5 - #10-32, 0.11C v
4 mm tube receptacle
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
din rail,
plug-in with
F. C. and prewired
connector
HOW TO ORDER
34B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
34B-LOO-GXXO-XXX
1 3
34B-NOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
DJ
Plug-in
DD 24VDC (2.5 W)
DT
Plug-in with light
DF 24VDC (4.0 W)
DE
Plug-in with suppression diode
xx
Other Options
DV
xx
Plug-in with light and suppression diode
Other Options
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS
Port size
M5
# 10-32
4 mm tube receptacle
Number of stations (03=3 stations)
Din rail spec. (EN50 022)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
ZZ
ECF34B-00xxx-xxxx
Side cylinder ports
(10.5 mm)
ECF34B-00CDB-ZZXX
ECF34B-00CBB-ZZXX
ECF34B-00CEB-ZZXX
Connector
LA 9 Pin Sub D*
LB 15 Pin Sub D*
LC 25 Pin Sub D*
LD 10 Pin Ribbon Cable**
LE 16 Pin Ribbon Cable**
LF 20 Pin Ribbon Cable**
LG 26 Pin Ribbon Cable**
LH 3/8” NPSM Conduit Port
Standard Base Wires
L=Left Side; R=Right Side
ZZ Connector
RA 9 Pin Sub D*
RB 15 Pin Sub D*
RC 25 Pin Sub D*
RD 10 Pin Ribbon Cable**
RE 16 Pin Ribbon Cable**
RF 20 Pin Ribbon Cable**
RG 26 Pin Ribbon Cable**
RH 3/8” NPSM Conduit Port
Standard Base Wires
* MIL. Spec; MIL-C-24308
** MIL. Spec; MIL-C-83503
Note: Left and right end is determined by facing conduit passage.
Consult “Precautions” before use, installation or service of MAC Valves.

2
3
1
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 34
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.11C v , 2.5 W : 0.09C v , 1.8 W : 0.06C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16595. • Mounting screw (x2) : 35031. • Blanking plate : M-34005.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
9.0 17.4
80.1
16.7
3
1
37.9
VAC TO 120 PSI
ELECTRICAL
WATTS
MODEL
WIXOM,MI.USA MODIF.
LIEGE,BELGIUM
AUCKLAND,N.Z.
20.0
5.0
53.5
88.7
60.9
20.2 10.5
10.0
2
2
2
2
Consult “Precautions” before use, installation or service of MAC Valves.

Section 2 Options
Consult “Precautions” before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Codification table for voltages / Manual operator / Electrical connection
VALVE CODE ➤
- G XX X - X XX
1 2 3 4
OPTIONS AVAILABLE FOR
- solenoid valves 34 & 44 Series
Consult “Precautions”before use, installation or service of MAC Valves.

OPTIONS
Back
1. VOLTAGE (type 34 Series)
-G XX X - X XX VOLTAGE
DC 24 VDC (1,8 W)
DD 24 VDC (2,5 W)
DE 24 VDC (3,0 W)
DF 24 VDC (4,0 W)
DJ 12 VDC (1,8 W)
DK 12 VDC (2,5 W)
DM 12 VDC (3,0 W)
DN 12 VDC (4,0 W)
1. VOLTAGE (type 44 Series)
-G XX X - X XX VOLTAGE
DA 24 VDC (1,0 W)
DC 24 VDC (1,8 W)
DD 24 VDC (2,5 W)
DF 24 VDC (4,0 W)
DG 12 VDC (1,0 W)
DJ 12 VDC (1,8 W)
DK 12 VDC (2,5 W)
DN 12 VDC (4,0 W)
2. WIRE LENGTH (Common options for 34 & 44 Series)
-G XX X - X XX WIRE LENGTH
A 18”
B 24”
C 36”
D 48”
E 72”
F 96”
G 120”
H 144”
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Back
3. MANUAL OPERATOR (COMMON OPTIONS FOR 34 & 44 SERIES)
-G XX X - X XX MANUAL OPERATOR
1 Non-locking recessed
3 Non-locking extended
4. ELECTRICAL CONNECTION (COMMON OPTIONS FOR 34 & 44 SERIES)
-G XX X - X XX NO CONNECTOR
BA Flying leads
BB BA with ground wire
BC BA with light
BD BA with light and ground wire
BE BA with suppression diode
BF BA with suppression diode and ground wire
BG BA with suppression diode and light
BH BA with suppression diode, light and ground wire
BN BA with suppression diode and blocking diode
BP BA with suppression diode, blocking diode and ground wire
BR BA with suppression diode, blocking diode and light
BS BA with suppression diode, blocking diode, light and ground wire
BT BA with light
BU BA with light and ground wire
BV BA with suppression diode and light
BW BA with suppression diode, light and ground wire
BX BA with suppression diode, blocking diode and light
BY BA with suppression diode, blocking diode, light and ground wire
-G XX X - X XX PLUG-IN CONNECTOR
KA Mini connector with flying leads
KB KA with ground wire
KE KA with suppression diode
KF KA with suppression diode and ground wire
KJ Mini connector for KA option
KM Mini connector for KB option
KN KA with suppression diode and blocking diode
KP KA with suppression diode, blocking diode and ground wire
KT KA with light
KU KA with light and ground wire
KV KA with suppression diode and light
KW KA with suppression diode, light and ground wire
KX KA with suppression diode, blocking diode and light
KY KA with suppression diode, blocking diode, light and ground wire
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
PIN #6
PIN #9
MOD. SD09
PIN #1
PIN #5
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 9
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 7 max.
• Max. 24 V=/5.4 W per solenoid
• 2 common wires
PIN #9
PIN #15
MOD. SD15
PIN #1
PIN #8
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 15
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 12 max.
• Max. 24 V=/5.4 W per solenoid
• 3 common wires
PIN #14
PIN #25
MOD. SD25
PIN #1
PIN #13
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 25
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 20 max.
• Max. 24 V=/5.4 W per solenoid
• 5 common wires
Note : Use desired MOD. number after circuit bar part number

O p t i o n s
OPTIONS
Connector termination details
CONNECTOR
SOL 1
SOL 2 SOL 3 SOL .. SOL 20 SOL 21 SOL 22 SOL 23 SOL 24
Single solenoid circuit bar
SOL 2 SOL 4 SOL 6 SOL 8 SOL 16 SOL 18 SOL 20 SOL 22 SOL 24
CONNECTOR
SOL 1 SOL 3 SOL 5 SOL 13 SOL 15 SOL 17 SOL 19 SOL 21 SOL 23
Double solenoid circuit bar
SD09 SD15 SD25
1
SOL. 1
1
SOL. 1
1
SOL. 1
2
SOL. 2
2
SOL. 2
2
SOL. 2
3
SOL. 3
3
SOL. 3
3
SOL. 3
4
SOL. 4
4
SOL. 4
4
SOL. 4
8
COMMON (+)
13
COMMON (+)
21
COMMON (+)
5
SOL. 5
5
SOL. 5
5
SOL. 5
6
SOL. 6
6
SOL. 6
6
SOL. 6
7
SOL. 7
7
SOL. 7
7
SOL. 7
9
COMMON (+)
8
SOL. 8
8
SOL. 8
14
COMMON (+)
22
COMMON (+)
9
SOL. 9
9
SOL. 9
10 SOL. 10
10 SOL. 10
11
SOL. 11
11
SOL. 11
12 SOL. 12
12 SOL. 12
15
COMMON (+)
23
COMMON (+)
13
SOL. 13
14 SOL. 14
15
SOL. 15
16 SOL. 16
24
COMMON (+)
17
18 SOL. 18
19
20 SOL. 20
SOL. 17
SOL. 19
25
COMMON (+)

Direct solenoid and solenoid pilot operated valves
Series 35
Circuit bar mounting
non plug-in
non plug-in
with Pr. Reg.
plug-in
plug-in
with side
Pr. Reg.
plug-in
with integral
terminal strip
plug-in with
integral terminal
strip and side
Pr. Reg.
Manual operator
Armature
Epoxy encapsulated solenoid
Push pin
Spring biased moveable pole piece
1
Bonded balanced poppet
CYL.
PORT
2
N.C.
PORT
Spring return
3
SERIES FEATURES
• Patented MACSOLENOID ® for fastest possible response times.
• Balanced poppet permits versatility in function :
- 3 way N.C. - 3 way N.O. - Divertor - Selector
• Extremely high cycle rate capability.
• Various solenoid enclosures and plug-in connectors.
• Low wattage DC solenoids - down to 1.8 watts.
• Rated for lubricated or non-lubricated service.
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 35
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC 1/8” NPTF - #10-32 UNF 0.10C v non plug-in
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
35A-xxx-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Universal valve
CYL
Valve less base
IN EXH
35A-B00-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
AA 120/60, 110/50
A
18” (Flying leads)
1 Non-locking Recessed
KA
Square connector
AB 240/60, 220/50
J
Connector
2 Locking Recessed
KD
Square connector
with light
AC 24/60, 24/50
x
Other Options
x
Other Options
BA
Flying leads
FB 24VDC (1.8 W)
xx
Other Options
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx
Other Options
HOW TO ORDER CIRCUIT BAR**
Port size
1/8” NPTF
# 10-32 UNF
EBM35A-xxxx-xx
Side cylinder ports
Spacing 21 mm
EBM35A-001A-XX
EBM35A-001B-XX
Bottom cylinder ports
Spacing 21 mm
EBM35A-002A-XX
EBM35A-002B-XX
Number of stations (03=3 stations)
* * Other options available. Consult factory.
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 35
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16447.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-35004.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
VALVE BLANKING
PLATE
21,0
"A"
21,0
5,2 DIA.
2 MTG. HOLES
D
7,0
21,0
5,0
OPTIONAL
BOTTOM PORTS
5,0
29,5
2 2
5,0
B
64,5
32,5
26,3
50,5
22,0
11,5
SPACING SIZE
A
17,0
32,0
40,0
1/8” 2 PORTS
BOTH ENDS
STANDARD
FOR JB
SPACING SIZE
21.0
26.0
B D
1/8”
# 10-32
8.0
5.5
24.5
24.2
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 35
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC 1/8” NPTF - #10-32 UNF 0.10C v
non plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
35A-xxx-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Universal valve
CYL
Valve less base
Valve less base w/ gage port
IN EXH
35A-B00-DXXX-XXX
35A-F00-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
AA 120/60, 110/50
A
18” (Flying leads)
1 Non-locking Recessed
KA
Square connector
AB 240/60, 220/50
J
Connector
2 Locking Recessed
KD
Square connector
with light
AC 24/60, 24/50
x
Other Options
x
Other Options
BA
Flying leads
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
xx
Other Options
DF 24VDC (12.7 W)
xx Other Options
EBM35A-xxxx-xx
HOW TO ORDER CIRCUIT BAR WITH PRESSURE REGULATORS (TO BE ORDERED SEPARATELY)* *
Port size
Side cylinder ports
Spacing 21 mm
Spacing 40 mm
1/8” NPTF
# 10-32 UNF
Port size
Bottom cylinder ports
EBM35A-003A-XX
EBM35A-003B-XX
Spacing 21 mm
EBM35A-023A-XX
EBM35A-023B-XX
Spacing 40 mm
1/8” NPTF
# 10-32 UNF
EBM35A-004A-XX
EBM35A-004B-XX
EBM35A-024A-XX
EBM35A-024B-XX
Number of stations (03=3 stations)
Other options available. Consult factory.
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
use 40 mm spacing for valves w/ gage port.
** Pressure Regulators :
35A-00M (Adjusting knob)
35A-00L (Slotted stem)
35A-00U (Locking stem)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 35
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16447.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-35004. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
VALVE BLANKING
PLATE
B
5 5
5,2 DIA
2 MTG. HOLES
21,0 "A" 21,0
21
5
35,5
2 2
1/8” 2 PORTS
BOTH ENDS
REGULATOR
BLANKING PLATE
8,0 58,3
5,0
32,5
20,1
47,5
56,5
28,0
17,75
14,0 16,0
SPACING SIZE
A
OPTIONAL
BOTTOM PORTS
10,5
25,5
40,0
91,1
STANDARD
FOR GAGES
PORT SIZE
B
21.0
40.0
1/8”
15.5
# 10-32
18.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 35
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC 1/8” NPTF - #10-32 UNF 0.10C v plug-in
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
35A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR "PLUG-IN" CIRCUIT BAR
Universal valve
CYL
Valve less base
IN EXH
35A-B00-DXXJ-XFM
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
1 Non-locking Recessed
2 Locking Recessed
x Other Options
HOW TO ORDER "PLUG-IN" CIRCUIT BAR **
ECD35A-xxxx-xx-xx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
21
ECD35A-001A-A0-XX*
ECD35A-002A-A0-XX*
# 10-32 UNF
21
ECD35A-001B-A0-XX*
ECD35A-002B-A0-XX*
1/8” NPTF
30
ECD35A-031A-C0-XX*
ECD35A-032A-C0-XX*
# 10-32 UNF
30
ECD35A-031B-C0-XX*
ECD35A-032B-C0-XX*
Number of stations (03=3 stations)
* * Other options available. Consult factory.
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector (9, 15 or 25).
* A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal w/light (120V)
CB = terminal w/light (240V)
CD = terminal w/light (24V)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 35
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16447.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-35004. • Plug-in protector : 16520.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
VALVE BLANKING
PLATE
21,0
“A” 21,0
21,0
22,8
61,0
5,1
17
68,5
47,5
2
2
30,0
19,8
17,0 20,0
40
13,5
5,0
37,0
1/8” PORTS
1 & 3 EACH END
29,0
57,3
1" NPSM
EACH END
4,5
78,0
84,8
2
4,5
5,2 DIA. (2) MOUNT-
ING HOLES
SPACING SIZE
A
37,0
STANDARD
FOR TERMINAL
STRIPS
21.0
30.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 35
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC 1/8” NPTF - #10-32 UNF 0.10C v
plug-in
with side
Pr. Reg.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
35A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR "PLUG-IN" CIRCUIT BAR
Universal valve
CYL
Valve less base
Valve less base w/ gage port
IN EXH
35A-B00-DXXJ-XFM
35A-F00-DXXJ-XFM
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
1 Non-locking Recessed
2 Locking Recessed
x Other Options
ECD35A-xxxx-xx-xx
HOW TO ORDER "PLUG-IN" CIRCUIT BAR WITH PRESSURE REGULATORS (TO BE ORDERED SEPARATELY)* *
Port size
1/8” NPTF
# 10-32 UNF
1/8” NPTF
# 10-32 UNF
1/8” NPTF
# 10-32 UNF
Spacing
mm
21
21
30
30
40
40
Bottom cylinder ports
ECD35A-004A-A0-XX*
ECD35A-004B-A0-XX*
ECD35A-034A-C0-XX*
ECD35A-034B-C0-XX*
ECD35A-024A-A0-XX*
ECD35A-024B-A0-XX*
Number of stations (03=3 stations)
* * Other options available. Consult factory.
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector (9, 15 or 25).
minimum spacing for terminal strips is 30 mm.
use 40 mm spacing for valves w/gage port.
** Pressure Regulators :
35A-00M (Adjusting knob)
35A-00L (Slotted stem)
35A-00U (Locking stem)
Consult “Precautions” before use, installation or service of MAC Valves.
* A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal w/light (120V)
CB = terminal w/light (240V)
CD = terminal w/light (24V)

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 35
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16447.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-35004. • Blanking plate regulator : M-35005.
• Plug-in protector : 16520.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
VALVE BLANKING
PLATE
21,0
“A” 21,0
21,0
22,8
61,0
5,1
17,0
68,5
47,5
2
2
30,0
19,8
17,0 20,0
40,0
13,5
5,0
37,0
1/8” PORTS
1 & 3 EACH END
29,0
57,3
1" NPSM
EACH END
4,5
78,0
84,8
5
2
SPACING SIZE
A
13,4 “B”
51,0
4,5
37,0
20,7
5,2 DIA. (2)
MOUNTING HOLES
STANDARD
FOR GAGES
FOR TERMINAL
STRIPS
SPACING SIZE
21.0
40.0
30.0
B
SLOTTED
LOCKING STEM
6.0
ADJUSTING KNOB
13.4
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 35
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC 1/8” NPTF - #10-32 UNF 0.10C v
plug-in
with integral
terminal strip
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
35A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR "PLUG-IN" CIRCUIT BAR
Universal valve
CYL
Valve less base
IN EXH
35A-B00-DXXJ-XFM
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
1 Non-locking Recessed
2 Locking Recessed
x Other Options
HOW TO ORDER "PLUG-IN" CIRCUIT BAR **
ECE35A-xxxx-xx-xx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
26
ECE35A-011A-C0-XX*
ECE35A-012A-C0-XX*
# 10-32 UNF
26
ECE35A-011B-C0-XX*
ECE35A-012B-C0-XX*
Number of stations (03=3 stations)
* * Other options available. Consult factory.
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
end plate kit required: M-45017.
* C0 = terminal strip
CA = terminal strip w/light (120V)
CB = terminal strip w/light (240V)
CD = terminal strip w/light (24V)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 35
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16447.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-35004. • Plug-in protector : 16520.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
16.0
28.5
26.0
LC
C L
C L
LC
30.0
43.0
68.5
2 2 2 2
1/8" - 27 N.P.T.F.
1/8" - 28 B.S.P.PL.
1/8" - 28 B.S.P.TR.
#10-32
M5 X 0.8
#10-32 GAGE PORT
(OPTIONAL)
LC
C L
C L
C L
1/4"-18 N.P.T.F.
TYP. (2) EACH END
LC
C L
C L
C L
40.0
5.0
EX
2 2
IN
EX
IN
100.4
89.4
58.4
TYP.
MODEL
G
33.9
71.4
79.7
4.5
TYP.
158.0
19.9
28.9
10.9
1"-11 1/2 N.P.S.M.
Note: Bottom & side cylinder ports not available on the same station
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 35
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC 1/8” NPTF - #10-32 UNF 0.10C v
integral terminal
strip and side
plug-in with
Pr. Reg.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
35A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR "PLUG-IN" CIRCUIT BAR
Universal valve
CYL
Valve less base
Valve less base w/ gage port
IN EXH
35A-B00-DXXJ-XFM
35A-F00-DXXJ-XFM
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
1 Non-locking Recessed
2 Locking Recessed
x Other Options
HOW TO ORDER "PLUG-IN" CIRCUIT BAR WITH PRESSURE REGULATORS (TO BE ORDERED SEPARATELY) **
ECE35A-xxxx-xx-xx
Port size
1/8” NPTF
# 10-32 UNF
1/8” NPTF
# 10-32 UNF
Spacing
mm
26
26
40
40
Bottom cylinder ports
ECE35A-014A-C0-XX*
ECE35A-014B-C0-XX*
ECE35A-024A-C0-XX*
ECE35A-024B-C0-XX*
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
use 40 mm spacing for valves w/ gage port.
end plate kit required: M-45017.
** Pressure Regulators :
35A-00M (Adjusting knob)
35A-00L (Slotted stem)
35A-00U (Locking stem)
* C0 = terminal strip
CA = terminal strip w/light (120V)
CB = terminal strip w/light (240V)
CD = terminal strip w/light (24V)
Consult “Precautions” before use, installation or service of MAC Valves.

L O
C K
L O
C K
L O
C K
L O
C K
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 35
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16447.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-35004. • Blanking plate regulator : M-35005.
• Plug-in protector : 16520.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
16.0
28.5
LC
A
C L
C L
LC
43.0
68.5
#10-32 GAGE PORT
(OPTIONAL)
B
LC
C L
C LC
C L
1/4"-18 N.P.T.F.
TYP. (2) EACH END
1/8" - 27 N.P.T.F.
1/8" - 28 B.S.P.PL.
1/8" - 28 B.S.P.TR.
#10-32
M5 X 0.8
LC
C L
C L
C L
EX
2 2
151.4
WITH SIDE
REGULATOR
100.4
IN
IN
EX
89.4
58.4
TYP.
MODEL
G
33.9
71.4
79.7
4.5
TYP.
158.0
19.9
28.9
10.9
1"-11 1/2 N.P.S.M.
Dim.
B
Dim.
5.0
40.0
A
SLOTTED
LOCKING STEM
ADJUSTABLE KNOB
6.0
13.4
STANDARD
SPACING
SPACING
FOR GAUGES
26.0
40.0
Consult “Precautions” before use, installation or service of MAC Valves.

Section 2 Options
Consult “Precautions” before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Codification table for voltages / Wire length / Manual operators / Electrical connections
VALVE CODE ➤
- D XX X - X XX
1 2 3 4
OPTIONS AVAILABLE FOR
- Solenoid valves 35 & 45 Series
Consult “Precautions”before use, installation or service of MAC Valves.

OPTIONS
Back
1. VOLTAGE
- D XX X - X XX VOLTAGE
AD 24/60
AE 200/60
AF 240/50
AG 100/50, 100/60, 110/60
DB 12 VDC (5.4 W)
DC 12 VDC (7.5 W)
DD 24 VDC (7.3 W)
DE
12 VDC (12.7 W) CLSF
DK 110 VDC (5.8 W)
DL 64 VDC (6.0 W)
DM 36 VDC (5.8 W)
DN 6 VDC (6.0 W)
DP 48 VDC (5.8 W)
DU 24 VDC (6.0 W)
EA 12 VDC (6.0 W)
FA 12 VDC (1.8 W)
FE 12 VDC (2.4 W)
FF 24 VDC (2.4 W)
2. WIRE LENGTH
- D XX X - X XX WIRE LENGTH
B 24”
C 36”
D 48”
E 72”
F 96”
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Back
3. MANUAL OPERATOR
- D XX X - X XX MANUAL OPERATOR
0 No operator
1 Non-locking recessed
2 Locking recessed
3 Non-locking extended
4 Locking extended
4. ELECTRICAL CONNECTION
- D XX X - X XX ELECTRICAL CONNECTION
BA Flying leads
BK BA with protection diode
BL BA with protection varistor
CA 1/2" NPS conduit
*FN Plug-in with diode
*FP Plug-in with M.O.V.
JB Rectangular connector
JD Rectangular connector with light
JM Rectangular connector, male only
KA Square connector
KB Square connector with protection diode
KC Square connector with protection varistor
KD Square connector with light
KE Square connector with light and protection diode
KF Square connector with light and protection varistor
KJ Square connector (male only)
KK Square connector with protection diode (male only)
KL Square connector with protection varistor (male only)
TA Dual tabs
TB TA with protection diode
TD TA with light
TE TA with light and protection diode
TJ Dual tabs (male only)
TK TJ with protection diode
TM TJ with light
TN TJ with light and protection diode
* For use with the ECD and ECE style circuit bars.
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
PIN #6
PIN #9
MOD. SD09
PIN #1
PIN #5
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 9
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 7 max.
• Max. 24 V=/5.4 W per solenoid
• 2 common wires
PIN #9
PIN #15
MOD. SD15
PIN #1
PIN #8
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 15
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 12 max.
• Max. 24 V=/5.4 W per solenoid
• 3 common wires
PIN #14
PIN #25
MOD. SD25
PIN #1
PIN #13
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 25
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 20 max.
• Max. 24 V=/5.4 W per solenoid
• 5 common wires
Note : Use desired MOD. number after circuit bar part number

O p t i o n s
OPTIONS
Connector termination details
CONNECTOR
SOL 1
SOL 2 SOL 3 SOL .. SOL 20 SOL 21 SOL 22 SOL 23 SOL 24
Single solenoid circuit bar
SOL 2 SOL 4 SOL 6 SOL 8 SOL 16 SOL 18 SOL 20 SOL 22 SOL 24
CONNECTOR
SOL 1 SOL 3 SOL 5 SOL 13 SOL 15 SOL 17 SOL 19 SOL 21 SOL 23
Double solenoid circuit bar
SD09 SD15 SD25
1
SOL. 1
1
SOL. 1
1
SOL. 1
2
SOL. 2
2
SOL. 2
2
SOL. 2
3
SOL. 3
3
SOL. 3
3
SOL. 3
4
SOL. 4
4
SOL. 4
4
SOL. 4
8
COMMON (+)
13
COMMON (+)
21
COMMON (+)
5
SOL. 5
5
SOL. 5
5
SOL. 5
6
SOL. 6
6
SOL. 6
6
SOL. 6
7
SOL. 7
7
SOL. 7
7
SOL. 7
9
COMMON (+)
8
SOL. 8
8
SOL. 8
14
COMMON (+)
22
COMMON (+)
9
SOL. 9
9
SOL. 9
10 SOL. 10
10 SOL. 10
11
SOL. 11
11
SOL. 11
12 SOL. 12
12 SOL. 12
15
COMMON (+)
23
COMMON (+)
13
SOL. 13
14 SOL. 14
15
SOL. 15
16 SOL. 16
24
COMMON (+)
17
18 SOL. 18
19
20 SOL. 20
SOL. 17
SOL. 19
25
COMMON (+)

Direct solenoid and solenoid pilot operated valves
Series 37
Circuit bar mounting
non plug-in
cylinder ports
in valve
non plug-in
cylinder ports
in base
non plug-in
cylinder ports
in base with
Pr. Reg.
non plug-in
add-on style
cylinder ports
in base
non plug-in
add-a-unit
stations
plug-in
plug-in
with Pr. Reg.
add-on style
plug-in
add-on style
plug in
with Pr. Reg.
plug-in
add-a-unit
stations
plug-in
add-a-unit
stations
with Pr. Reg.
Manual operator
Armature
Coil
Push pin
Pole piece
“D” seal
1
Poppet
2
3
Valve return spring
SERIES FEATURES
• Balanced poppet equals consistent high shifting forces.
• Valve shifting forces are consistent and independent of pressure fluctuations.
• High solenoid and return spring forces ensure high speed and precise repeatability.
• Built-in wear compensation - valve stroke is shorter than solenoid stroke.
• Constant high flow maintained throughout the pressure range.
• Exhaust contaminants are isolated from the solenoid.
• Full flow exhaust.
• Universal porting - 6 functions in one valve.
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 37
Function Port size (Inlet & Exhaust) Flow (Max) Circuit bar mounting Profile
non plug-in
26 mm
3/2 NO-NC 1/4” - 3/8” 0.5C v cylinder ports
in valve
38 mm
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
Reset
HOW TO ORDER
37A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Valve port size
Universal valve
NC only valve
2
2
1/8” NPTF
1/4” NPTF
1 3
37A-EGO-HXXX-XXX
37A-EHO-HXXX-XXX
1 3
37A-FGO-HXXX-XXX
37A-FHO-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
A 18”
DB 24VDC (2.4 W)
C 36”
DA 24VDC (5.2 W)
x Other Options
AA 120VAC (must use with
rectified connector)
xx Other Options
HOW TO ORDER CIRCUIT BAR (REGULATORS ORDERED SEPARATELY)**
1 Non-locking
MA Plug-in wire assy
MC Plug-in wire assy
with light
BA Flying leads
BC Flying leads with light
HA Plug-in connector with
rectifier and light
xx Other Options
EBM37A-xxxxx-xx
Port size
COMMON INLET & EXHAUST
Without regulators (20mm)
With regulators (20mm)
26mm Profile
1/4” NPTF
EBM37A-01CAK-XX
-
38mm Profile
3/8” NPTF
-
EBM37A-01JAK-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
** Pressure Regulators :
PR37A-GOAx
X=A (0 to 120 PSI)
X=B (0 to 80 PSI)
X=C (0 to 30 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 37
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.25C v , 1.8 W : 0.15C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 17.0 ms
De-energize : 6.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16630. • Mounting screw (x2) : 35043. • Blanking plate : M-37002.
• Regulator blanking plate : R-47003.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
97.5
7.0
TYP.
109.9
29.2
12
12
12
12
63.0
24.5
1 3
10
10
10
10
21.5
25.0 20.5
B
A
Dim.
26 mm
38 mm
“A”
26.0
38.0
“B”
75.1
87.1
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 37
Function Port size Flow (Max) Circuit bar mounting Profile
3/2 NO-NC 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
non plug-in
cylinder ports
in base
26 mm
Reset
HOW TO ORDER
37A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
37A-C10-HXXX-XXX
1 3
37A-D10-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
A 18”
1 Non-locking
MA
Plug-in wire assy
DB 24VDC (2.4 W)
C 36”
MC
Plug-in wire assy
with light
DA 24VDC (5.2 W)
x
Other Options
BA
Flying leads
AA
120VAC (must use with
BC
Flying leads with light
rectified connector)
HA
Plug-in connector with
xx Other Options
HOW TO ORDER CIRCUIT BAR
EBM37A-00xxx-xx
xx
rectifier and light
Other Options
Port size
Side cylinder ports (18 mm)
Bottom cylinder ports (18 mm)
1/8” NPTF
1/4” NPTF
6 mm tube receptacle
EBM37A-00AAA-XX
EBM37A-00AAB-XX
EBM37A-00AAG-XX
EBM37A-00BAA-XX
EBM37A-00BAB-XX
EBM37A-00BAG-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 37
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.25C v , 1.8 W : 0.15C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 17.0 ms
De-energize : 6.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16630. • Mounting screw (x2) : 35043. • Blanking plate : M-37001.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Dim.
“B”
1/4”
16.5
M6 Carstick
18.5
Number of 1 2 3 4 5 6 7 8 9 10
stations
“A” 50.0 68.0 86.0 104.0 122.0 140.0 158.0 176.0 194.0 212.0
Dimensions are based on 18 mm centerline spacing
75.10
26.00
49.00
TYP.
21.50
TYP.
3
1
1/4" - 18 N.P.T.F.
2 HOLES
BOTH ENDS
1/4" - 19 B.S.P.TR
2 HOLES
BOTH ENDS
1/4" - 19 B.P.S.PL
2 HOLES
BOTH ENDS
35.50
"B"
2
28.00
7.00
6.25 DIA.
(2) MTG HOLES
18.00
TYP.
18.00
TYP.
10
2
10
"A"
10
10
2
2
12
12
12
12
25.00 22.00
TYP.
BOTH
ENDS
DIM FOR 1/4" &
M6 CARSTICK.
7.00
35.20
1/4" - 18 N.P.T.F.
TYP. PER STATION
1/8" - 27 N.P.T.F.
TYP. PER STATION
1/4" - 19 B.S.P.TR
TYP. PER STATION
1/4" - 19 B.P.S.PL
TYP. PER STATION
1/8" - 28 B.S.P.TR.
TYP. PER STATION
1/8" - 28 B.S.P.PL.
TYP. PER STATION
13.00
TYP.
9.50
TYP.
3
1
* M6 Carstick available only on side port
109.90
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 37
Function Port size Flow (Max) Circuit bar mounting Profile
3/2 NO-NC 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
non plug-in
cylinder ports
in base with
Pr. Reg.
38 mm
Reset
HOW TO ORDER
37A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
37A-C1O-HXXX-XXX
1 3
37A-D1O-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
Voltage
Wire length
Manual operator
Electrical connection
DC 24VDC (1.8 W)
A 18”
1 Non-locking
MA
Plug-in wire assy
DB 24VDC (2.4 W)
C 36”
MC
Plug-in wire assy
with light
DA 24VDC (5.2 W)
AA 120VAC (must use with
x
Other Options
BA
BC
Flying leads
Flying leads with light
rectified connector)
HA
Plug-in connector with
xx
Other Options
xx
rectifier and light
Other Options
HOW TO ORDER CIRCUIT BAR (REGULATORS ORDERED SEPARATELY)**
EBM37A-00xxx-xx
Port size
Side cylinder ports (18 mm)
Bottom cylinder ports (18 mm)
1/8” NPTF
1/4” NPTF
6 mm tube receptacle
EBM37A-00FAA-XX
EBM37A-00FAB-XX
EBM37A-00FAG-XX
EBM37A-00GAA-XX
EBM37A-00GAB-XX
EBM37A-00GAG-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
** Pressure Regulators :
PR37A-GOAx
X=A (0 to 120 PSI)
X=B (0 to 80 PSI)
X=C (0 to 30 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 37
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.25C v , 1.8 W : 0.15C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 17.0 ms
De-energize : 6.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16630. • Mounting screw (x2) : 35043. • Blanking plate : M-37001.
• Regulator blanking plate : R-47003.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of 2 3 4 5 6 7 8 9 10 11
stations
“A” 63.7 81.7 99.7 117.7 135.7 153.7 171.7 189.7 207.7 225.7
Dimensions are based on 18 mm centerline spacing
87.6
38.0
1 3
3/8" - 18 N.P.T.F.
2 HOLES
BOTH ENDS
3/8" - 19 B.S.P.TR
2 HOLES
BOTH ENDS
3/8" - 19 B.P.S.PL
2 HOLES
BOTH ENDS
33.8
10.0
2
18.0
TYP.
18.0
TYP.
2
10
"A"
10
12
10
12
12
GAGE
6.25 DIA.
2 MTG.
HOLES
2
1/4" - 18 N.P.T.F.
TYP. PER STATION
1/8" - 27 N.P.T.F.
TYP. PER STATION
25.0 25.0
TYP TYP BOTH
BOTH ENDS
ENDS
2
DIM. FOR 1/4" &
M6 CARSTICK
7.0
TYP
10
33.8
TYP
12
"E"
1/4" - 19 B.S.P.TR
TYP. PER STATION
1/8" - 28 B.S.P.TR.
TYP. PER STATION
1/4" - 19 B.P.S.PL
TYP. PER STATION
1/8" - 28 B.S.P.PL.
TYP. PER STATION
3
1
Dim.
“E”
Regulator with locking
adjusting screw
135.8
Regulator with
adjusting screw
131.8
Regulator with
adjusting knob
139.6
* M6 Carstick available only on side port
Note: Bottom & side cylinder ports not available on the same station
20.0
TYP.
21.5
TYP.
46.0
TYP.
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 37
Function Port size Flow (Max) Circuit bar mounting Profile
3/2 NO-NC 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
non plug-in
add-on style
cylinder ports
in base
38 mm
Reset
HOW TO ORDER
37A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
37A-C1O-HXXX-XXX
1 3
37A-D1O-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
Voltage
Wire length
Manual operator
Electrical connection
DC 24VDC (1.8 W)
A 18”
1 Non-locking
MA
Plug-in wire assy
DB 24VDC (2.4 W)
C 36”
MC
Plug-in wire assy
with light
DA 24VDC (5.2 W)
x
Other Options
BA
Flying leads
AA
120VAC (must use with
BC
Flying leads with light
rectified connector)
HA
Plug-in connector with
xx
Other Options
xx
rectifier and light
Other Options
HOW TO ORDER CIRCUIT BAR
Port size
EBM37A-00xxx-xx
Side cylinder ports (18 mm)
Bottom cylinder ports (18 mm)
1/8” NPTF
1/4” NPTF
6 mm tube receptacle
EBM37A-00DBA-XX
EBM37A-00DBB-XX
EBM37A-00DBG-XX
EBM37A-00EBA-XX
EBM37A-00EBB-XX
EBM37A-00EBG-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
add-a-unit stations may be added to above bars. Clic here for model numbers.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 37
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.25C v , 1.8 W : 0.15C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 17.0 ms
De-energize : 6.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16630. • Mounting screw (x2) : 35043. • Blanking plate : M-37001. • End plate Kit : M-37005-0
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
12
12
12
12
1
2
2 2
114.4
63.0
24.5
10
10
10
10
21.5
3
33.8
99.6
7.0
TYP.
21.7 18.0 25.0
87.6
2 2 2
38.0
10.0
25.0 18.0 21.7 26.8
Note: Bottom & side cylinder ports not available on the same station
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 37
Function Port size Flow (Max) Circuit bar mounting Profile
3/2 NO-NC 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
non plug-in
add-a-unit
stations
38 mm
Reset
HOW TO ORDER
37A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
37A-C1O-HXXX-XXX
1 3
37A-D1O-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
Voltage
Wire length
Manual operator
Electrical connection
DC 24VDC (1.8 W)
A 18”
1 Non-locking
MA
Plug-in wire assy
DB 24VDC (2.4 W)
C 36”
MC
Plug-in wire assy
with light
DA 24VDC (5.2 W)
x
Other Options
BA
Flying leads
AA
120VAC (must use with
BC
Flying leads with light
rectified connector)
HA
Plug-in connector with
xx
Other Options
xx
rectifier and light
Other Options
HOW TO ORDER CIRCUIT BAR
Port size
EBM37A-00xxx-xx
Side cylinder ports (18 mm)
Bottom cylinder ports (18 mm)
1/8” NPTF
1/4” NPTF
6 mm tube receptacle
EBM37A-00DCA-XX
EBM37A-00DCB-XX
EBM37A-00DCG-XX
EBM37A-00ECA-XX
EBM37A-00ECB-XX
EBM37A-00ECG-XX
Number of stations (01, 02, 03 or 04)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 37
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.25C v , 1.8 W : 0.15C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 17.0 ms
De-energize : 6.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16630. • Mounting screw (x2) : 35043. • Blanking plate : M-37001.
• O-ring port seal (x2) : 17015-01. • Tie rod (x2) : 79007-01 (one station length)
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
12
12
12
12
1
2
2 2
114.4
63.0
24.5
10
10
10
10
21.5
3
33.8
99.6
7.0
TYP.
21.7 18.0 25.0
87.6
2 2 2
38.0
10.0
25.0 18.0 21.7 26.8
Note: Bottom & side cylinder ports not available on the same station
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 37
Function Port size Flow (Max) Circuit bar mounting Profile
3/2 NO-NC 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
plug-in
32.5 mm
Reset
HOW TO ORDER
37A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
37A-C1O-HXXP-XXX
1 3
37A-D1O-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
FA
Plug-in
DB 24VDC (2.4 W)
FC
Plug-in with light
DA 24VDC (5.2 W)
FE
Plug-in with suppression diode
AA
120VAC (Mod. No. required see below)
FG
Plug-in with suppression diode
xx
Other Options
xx
with LED light
Other Options
HOW TO ORDER “PLUG-IN” CIRCUIT BAR**
ECD37A-xxxxx-xxxx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
18
ECD37A-00AAA-A0XX
ECD37A-00BAA-A0XX
1/4” NPTF
18
ECD37A-00AAB-A0XX
ECD37A-00BAB-A0XX
6 mm tube receptacle
18
ECD37A-00AAG-A0XX
ECD37A-00BAG-A0XX
1/8” NPTF
30
ECD37A-01AAA-C0XX
ECD37A-01BAA-C0XX
1/4” NPTF
30
ECD37A-01AAB-C0XX
ECD37A-01BAB-C0XX
6 mm tube receptacle
30
ECD37A-01AAG-C0XX
ECD37A-01BAG-C0XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector (9, 15 or 25).
for AC voltage use mod. FWR2 after circuit bar model number.
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 37
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.25C v , 1.8 W : 0.15C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 17.0 ms
De-energize : 6.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16630. • Mounting screw (x2) : 35043. • Blanking plate : M-37001.
• Base wire plug-in protector : 16520.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
109.1
COND.
1
3
19.5 20.7
TYP. TYP.
3/8" N.P.T.F.
2 HOLES
BOTH ENDS
28.15
31.7
TYP.
6.0
TYP.
9.5
22.85
22.85
12
10
12
10
18.0
TYP.
18.0
TYP.
A
12
10
12
10
2
2
2
2
6.25 DIA.
2 MTG.
HOLES
1/2"-14 N.P.S.M. CONDUIT
68.0
29.2
14.6
TYP.
COND.
1 3
18.0
TYP.
42.1
TYP.
75.6
TYP.
32.5
Number of 1 2 3 4 5 6 7 8 9 10
stations
“A” 45.7 63.7 81.7 99.7 117.7 135.7 153.7 171.7 189.7 207.7
Dimensions are based on 18 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 37
Function Port size Flow (Max) Circuit bar mounting Profile
3/2 NO-NC 1/8” - 1/4” 0.5C v
plug-in
with Pr. Reg.
44 mm
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
Reset
HOW TO ORDER
37A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
37A-C1O-HXXP-XXX
1 3
37A-D1O-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
FA
Plug-in
DB 24VDC (2.4 W)
FC
Plug-in with light
DA 24VDC (5.2 W)
FE
Plug-in with suppression diode
AA
120VAC (Mod. No. required see below)
FG
Plug-in with suppression diode
xx
Other Options
xx
with LED light
Other Options
HOW TO ORDER “PLUG-IN” CIRCUIT BAR (REGULATORS ORDERED SEPARATELY)**
ECD37A-xxxxx-xxxx
Port size
Spacing mm
Bottom cylinder ports
1/8” NPTF
1/4” NPTF
1/8” NPTF
1/4” NPTF
18
18
30
30
ECD37A-00CDA-A0XX
ECD37A-00CDB-A0XX
ECD37A-01CDA-C0XX
ECD37A-01CDB-C0XX
Number of stations (03=3 stations)
** Other options available, consult factory.
Note :
clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector (9, 15 or 25).
for AC voltage use mod. FWR2 after circuit bar model number.
** Pressure Regulators :
PR37A-GOAx
X=A (0 to 120 PSI)
X=B (0 to 80 PSI)
X=C (0 to 30 PSI)
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal strip with light (120V)
CB = terminal strip with light (240V)
CD = terminal strip with light (24V)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 37
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.25C v , 1.8 W : 0.15C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 17.0 ms
De-energize : 6.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16630. • Mounting screw (x2) : 35043. • Blanking plate : M-37001.
• Base wire plug-in protector : 16520. • Regulator blanking plate : R-47003.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
B
D
SHOWN W\ SANDWICH
REGULATOR
COND.
116.1
1"- 11 1/2 N.P.S.M.
CONDUIT
1
3
3/8" N.P.T.F.
3 HOLES
BOTH ENDS
SHOWN W\ STANDARD
REGULATOR
40.7
20.35
COND. 1
3
44.0
19.2 23.2
TYP. TYP.
33.0
TYP. 6.0
TYP.
9.5
18.5
TYP.
48.6
TYP.
87.1
TYP.
33.55
A
22.85
12
12
10
10
2
18.0
TYP.
18.0
TYP.
2
C
12
10
12
10
Dim.
“A”
Dim.
“B”
“D”
1/4”
25.85
1/8”
25.85
Regulator with locking
adjusting screw
188.8
182.5
6 mm Legris
22.85
Regulator with
adjusting screw
184.7
178.4
6.25 DIA.
2 MTG.
HOLES
Number of 1 2 3 4 5 6 7 8 9 10
stations
Regulator with
“C” 45.7 63.7 81.7 99.7 117.7 135.7 153.7 171.7 189.7 207.7
adjusting knob
191.7
Dimensions are based on 18 mm centerline spacing
185.4
Note: Bottom & side cylinder ports not available on the same station
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 37
Function Port size Flow (Max) Circuit bar mounting Profile
3/2 NO-NC 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
add-on style
plug-in
44 mm
Reset
HOW TO ORDER
37A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
37A-C1O-HXXP-XXX
1 3
37A-D1O-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
FA
Plug-in
DB 24VDC (2.4 W)
FC
Plug-in with light
DA 24VDC (5.2 W)
FE
Plug-in with suppression diode
AA
120VAC (Mod. No. required see below)
FG
Plug-in with suppression diode
xx
Other Options
xx
with LED light
Other Options
HOW TO ORDER “PLUG-IN” CIRCUIT BAR**
ECD37A-xxxxx-xxxx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
18
ECD37A-00AEA-A0XX
ECD37A-00BEA-A0XX
1/4” NPTF
18
ECD37A-00AEB-A0XX
ECD37A-00BEB-A0XX
6 mm tube receptacle
18
ECD37A-00AEG-A0XX
ECD37A-00BEG-A0XX
1/8” NPTF
30
ECD37A-01AEA-C0XX
ECD37A-01BEA-C0XX
1/4” NPTF
30
ECD37A-01AEB-C0XX
ECD37A-01BEB-C0XX
6 mm tube receptacle
30
ECD37A-01AEG-C0XX
ECD37A-01BEG-C0XX
Number of stations (03=3 stations)
** Other options available, consult factory.
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
clic for multi-pin connector (9, 15 or 25).
for AC voltage use mod. FWR2 after circuit bar model number.
add-a-unit stations may be added to above bars. Clic here for model numbers.
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal strip with light (120V)
CB = terminal strip with light (240V)
CD = terminal strip with light (24V)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 37
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.25C v , 1.8 W : 0.15C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 17.0 ms
De-energize : 6.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16630. • Mounting screw (x2) : 35043. • Blanking plate : M-37001. • End plate kit : M-37003-01
• Base wire plug-in protector : 16520. • Isolator disc between add-a-units : 28438.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of
stations
“C” w/regulator
1
-
2
53.6
3
71.6
4
89.6
5
6
7
107.6 125.6 143.6 161.6 179.6 197.6
8
9
10
117.3
1"-11 1/2 N.P.S.M. CONDUIT
“C” w/o regulator
-
51.85 69.85 87.85 105.85 123.85 141.85 159.85 177.85 195.85
“D” 21.7 39.7 57.7 75.7 - - - - -
Dimensions are based on 18 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
-
3
1
COND.
79.2
3/8" N.PT.F.
TYP.(2) BOTH ENDS
2
10.85
TYP.
10.85
TYP.
2
10
12
16.0
D
10
2
12
2
B
A
2
10
12
C
33.55
TYP.
9.5
TYP.
6.0
TYP.
33.0
TYP.
6.25 DIA. HOLE
TYP.(2)
44.0
23.2
TYP.
19.2
TYP.
3
1
COND.
40.7
20.35
TYP.
18.5
TYP.
48.6
TYP.
Dim.
“A”
1/8”
22.65
1/4”
24.20
6 mm Legris
22.85
1/8” w/regulator
-
1/4” w/regulator
-
87.1
TYP.
“B”
22.85
22.85
25.85
21.20
22.60
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 37
Function Port size Flow (Max) Circuit bar mounting Profile
3/2 NO-NC 1/8” - 1/4” 0.5C v
add-on style
plug in
with Pr. Reg.
44 mm
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
Reset
HOW TO ORDER
37A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
37A-C1O-HXXP-XXX
1 3
37A-D1O-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
FA
Plug-in
DB 24VDC (2.4 W)
FC
Plug-in with light
DA 24VDC (5.2 W)
FE
Plug-in with suppression diode
AA
120VAC (Mod. No. required see below)
FG
Plug-in with suppression diode
xx
Other Options
xx
with LED light
Other Options
HOW TO ORDER “PLUG-IN” CIRCUIT BAR (REGULATORS ORDERED SEPARATELY)**
ECD37A-xxxxx-xxxx
Port size
Spacing mm
Bottom cylinder ports
1/8” NPTF
1/4” NPTF
1/8” NPTF
1/4” NPTF
18
18
30
30
ECD37A-00CEA-A0XX
ECD37A-00CEB-A0XX
ECD37A-01CEA-C0XX
ECD37A-01CEB-C0XX
Number of stations (03=3 stations)
** Pressure Regulators :
** Other options available, consult factory.
Note : clic for valves mounted on base at the factory, add - 9 to the model number. PR37A-GOAx
clic for multi-pin connector (9, 15 or 25).
X=A (0 to 120 PSI)
for AC voltage use mod. FWR2 after circuit bar model number.
X=B (0 to 80 PSI)
add-a-unit stations may be added to above bars. Clic here for model numbers. X=C (0 to 30 PSI)
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal strip with light (120V)
CB = terminal strip with light (240V)
CD = terminal strip with light (24V)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 37
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.25C v , 1.8 W : 0.15C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 17.0 ms
De-energize : 6.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16630. • Mounting screw (x2) : 35043. • Blanking plate : M-37001. • End plate kit : M-37003-01
• Base wire plug-in protector : 16520. • Isolator disc between add-a-units : 28438.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of
stations
“C” w/regulator
1
-
2
53.6
3
71.6
4
89.6
5
6
7
107.6 125.6 143.6 161.6 179.6 197.6
8
9
10
E
SHOWN W/STANDARD
REGULATOR
117.3
1"-11 1/2 N.P.S.M. CONDUIT
“C” w/o regulator
“D”
-
21.7
51.85 69.85 87.85 105.85 123.85 141.85 159.85 177.85 195.85
39.7 57.7 75.7 - - - - - -
3
1
COND.
Dimensions are based on 18 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
79.2
3/8" N.PT.F.
TYP.(2) BOTH ENDS
2
10.85
TYP.
10.85
TYP.
2
10
12
16.0
D
10
2
12
2
B
A
2
10
12
C
33.55
TYP.
9.5
TYP.
6.0
TYP.
33.0
TYP.
6.25 DIA. HOLE
TYP.(2)
F
SHOWN W/SANDWICH
REGULATOR
Dim.
“A”
“B”
1/8”
22.65
22.85
1/4”
24.20
22.85
6 mm Legris
22.85
25.85
1/8” w/regulator
-
21.20
1/4” w/regulator
-
22.60
103.0
44.0
23.2
TYP.
19.2
TYP.
3
1
COND.
40.7
20.35
TYP.
Dim.
“E”
“F”
Regulator with locking
adjusting screw
188.8
182.5
Regulator with
adjusting screw
184.7
178.4
Regulator with
adjusting knob
191.7
185.4
18.5
TYP.
48.6
TYP.
87.1
TYP.
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 37
Function Port size Flow (Max) Circuit bar mounting Profile
3/2 NO-NC 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
plug-in
add-a-unit
stations
44 mm
Reset
HOW TO ORDER
37A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
37A-C1O-HXXP-XXX
1 3
37A-D1O-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
FA
Plug-in
DB 24VDC (2.4 W)
FC
Plug-in with light
DA 24VDC (5.2 W)
FE
Plug-in with suppression diode
AA
120VAC (Mod. No. required see below)
FG
Plug-in with suppression diode
xx
Other Options
xx
with LED light
Other Options
HOW TO ORDER “PLUG-IN” CIRCUIT BAR**
ECD37A-xxxxx-xxxx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
18
ECD37A-00AFA-A0XX
ECD37A-00BFA-A0XX
1/4” NPTF
18
ECD37A-00AFB-A0XX
ECD37A-00BFB-A0XX
6 mm tube receptacle
18
ECD37A-00AFG-A0XX
ECD37A-00BFG-A0XX
1/8” NPTF
30
ECD37A-01AFA-C0XX
ECD37A-01BFA-C0XX
1/4” NPTF
30
ECD37A-01AFB-C0XX
ECD37A-01BFB-C0XX
6 mm tube receptacle
30
ECD37A-01AFG-C0XX
ECD37A-01BFG-C0XX
Number of stations (03=3 stations) - maximum length is 4 stations.
** Other options available, consult factory.
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
for AC voltage use mod. FWR2 after circuit bar model number.
when add-a-unit stations are added to bars with a multi-pin connector, mod SD03 should
be included with add-a-unit model number.
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal strip with light (120V)
CB = terminal strip with light (240V)
CD = terminal strip with light (24V)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 37
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.25C v , 1.8 W : 0.15C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 17.0 ms
De-energize : 6.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16630. • Mounting screw (x2) : 35043. • Blanking plate : M-37001.
• O-ring port seal (x2) : 17015-01 • Tie rod (x2) : 79007-01 (one station length).
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of
stations
“C” w/regulator
1
-
2
53.6
3
71.6
4
89.6
5 6 7 8 9 10
107.6 125.6 143.6 161.6 179.6 197.6
117.3
1"-11 1/2 N.P.S.M. CONDUIT
“C” w/o regulator
“D”
-
21.7
51.85 69.85 87.85 105.85 123.85 141.85 159.85 177.85 195.85
39.7 57.7 75.7 - - - - - -
3
1
COND.
Dimensions are based on 18 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
79.2
3/8" N.PT.F.
TYP.(2) BOTH ENDS
2
10.85
TYP.
10.85
TYP.
2
10
12
16.0
D
10
2
12
2
B
A
2
10
12
C
33.55
TYP.
9.5
TYP.
6.0
TYP.
33.0
TYP.
6.25 DIA. HOLE
TYP.(2)
44.0
23.2
TYP.
19.2
TYP.
3
1
COND.
40.7
20.35
TYP.
18.5
TYP.
48.6
TYP.
Dim.
“A”
1/8”
22.65
1/4”
24.20
6 mm Legris
22.85
1/8” w/regulator
-
1/4” w/regulator
-
87.1
TYP.
“B”
22.85
22.85
25.85
21.20
22.60
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 37
Function Port size Flow (Max) Circuit bar mounting Profile
3/2 NO-NC 1/8” - 1/4” 0.5C v
add-a-unit
stations
plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
44 mm
Reset
HOW TO ORDER
37A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Universal valve
2
NC only valve
2
Valve less base
1 3
37A-C1O-HXXP-XXX
1 3
37A-D1O-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DC 24VDC (1.8 W)
1 Non-locking
FA
Plug-in
DB 24VDC (2.4 W)
FC
Plug-in with light
DA 24VDC (5.2 W)
FE
Plug-in with suppression diode
AA
120VAC (Mod. No. required see below)
FG
Plug-in with suppression diode
xx
Other Options
xx
with LED light
Other Options
HOW TO ORDER “PLUG-IN” CIRCUIT BAR (REGULATORS ORDERED SEPARATELY)**
ECD37A-xxxxx-xxxx
Port size
Spacing mm
Bottom cylinder ports
1/8” NPTF
1/4” NPTF
1/8” NPTF
1/4” NPTF
18
18
30
30
ECD37A-00CFA-A0XX
ECD37A-00CFB-A0XX
ECD37A-01CFA-C0XX
ECD37A-01CFB-C0XX
Number of stations (03=3 stations) - maximum length is 4 stations.
** Other options available, consult factory.
Note : clic for valves mounted on base at the factory, add - 9 to the model number.
for AC voltage use mod. FWR2 after circuit bar model number.
when add-a-unit stations are added to bars with a multi-pin connector, mod
SD03 should be included with add-a-unit model number.
** Pressure Regulators :
PR37A-GOAx
X=A (0 to 120 PSI)
X=B (0 to 80 PSI)
X=C (0 to 30 PSI)
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal strip with light (120V)
CB = terminal strip with light (240V)
CD = terminal strip with light (24V)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 37
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.25C v , 1.8 W : 0.15C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 17.0 ms
De-energize : 6.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16630. • Mounting screw (x2) : 35043. • Blanking plate : M-37001.
• O-ring port seal (x2) : 17015-01 • Tie rod (x2) : 79007-01 (one station length). • Regulator blanking plate : R-47003.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of
stations
“C” w/regulator
1
-
2
53.6
3
71.6
4
89.6
5
6
7
107.6 125.6 143.6 161.6 179.6 197.6
8
9
10
E
SHOWN W/STANDARD
REGULATOR
117.3
1"-11 1/2 N.P.S.M. CONDUIT
“C” w/o regulator
“D”
-
21.7
51.85 69.85 87.85 105.85 123.85 141.85 159.85 177.85 195.85
39.7 57.7 75.7 - - - - - -
3
1
COND.
Dimensions are based on 18 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
79.2
3/8" N.PT.F.
TYP.(2) BOTH ENDS
2
10.85
TYP.
10.85
TYP.
2
10
12
16.0
D
10
2
12
2
B
A
2
10
12
C
33.55
TYP.
9.5
TYP.
6.0
TYP.
33.0
TYP.
6.25 DIA. HOLE
TYP.(2)
F
SHOWN W/SANDWICH
REGULATOR
Dim.
“A”
“B”
1/8”
22.65
22.85
1/4”
24.20
22.85
6 mm Legris
22.85
25.85
1/8” w/regulator
-
21.20
1/4” w/regulator
-
22.60
103.0
44.0
23.2
TYP.
19.2
TYP.
3
1
COND.
40.7
20.35
TYP.
Dim.
“E”
“F”
Regulator with locking
adjusting screw
188.8
182.5
Regulator with
adjusting screw
184.7
178.4
Regulator with
adjusting knob
191.7
185.4
18.5
TYP.
48.6
TYP.
87.1
TYP.
Consult “Precautions” before use, installation or service of MAC Valves.

Section 2 Options
Consult “Precautions” before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Codification table for voltages / Wire length / Manual operators / Electrical connections
VALVE CODE ➤
- H XX X - X XX
1 2 3 4
OPTIONS AVAILABLE FOR
- Solenoid valves 37 & 47 Series
Consult “Precautions”before use, installation or service of MAC Valves.

OPTIONS
Back
1. VOLTAGE
- H XX X - X XX VOLTAGE
DC Options
DA 24 VDC (5.2 W)
DB 24 VDC (2.4 W)
DC 24 VDC (1.8 W)
DD 24 VDC (1.0 W)
DF 12 VDC (5.2 W)
DG 12 VDC (2.4 W)
DH 12 VDC (1.8 W)
DJ 12 VDC (1.0 W)
DL 120 VDC (6.3 W)
AC Options (50/60hz)
AA 120 VAC (6.7 W)
AB 220 VAC (5.6 W)
AC 240 VAC (5.8 W)
AD 24 VAC (7.8 W)
Note : AC Voltages only available with “H” & “F” type connectors. MOD FWR2 must be used with the “F” type connectors.
2. WIRE LENGTH
- H XX X - X XX WIRE LENGTH
O
No lead wire
A 18”
B 24”
C 36”
D 48”
E 72”
F 96”
G 120”
H 144”
P
Plug-in (used only with “F”type connector Opts.)
Use “O” with MJ & MM Opts.
3. MANUAL OPERATOR
- H XX X - X XX MANUAL OPERATOR
0 No operator
1 Non-locking recessed
2 Locking recessed
3 Non-locking extended
4 Locking extended
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Back
4. ELECTRICAL CONNECTION
- H XX X - X XX ELECTRICAL CONNECTION
BA Flying leads
BB Flying leads with ground wire
BC Flying leads with led light
BD Flying leads with led light & ground wire
BE Flying leads with suppression diode
BF Flying leads with suppression diode & ground wire
BG Flying leads with suppression diode plus led light
BH Flying leads with suppression diode plus led light & ground wire
*BN Flying leads with suppression diode plus blocking diode
*BP Flying leads with suppression diode plus blocking diode & ground wire
*BR Flying leads with suppression diode plus blocking diode & led light
*BS Flying leads with suppression diode plus blocking diode & led light & ground wire
FA
FB
FC
FD
FE
FF
FG
FH
Plug-in
Plug-in with ground wire
Plug-in with led light
Plug-in with led light & ground wire
Plug-in with suppression diode
Plug-in with suppression diode & ground wire
Plug-in with suppression diode plus led light
Plug-in with suppression diode plus led light & ground wire
Note : FA ---- FH options for use with ECD type circuit bars
HA
HB
HC
HD
HL
HN
Circuit board plug-in with full wave rectifier & led light
Circuit board with full wave rectifier & led with ground wire
Same as “HA” without lead wires
Same as “HB” without lead wires
Circuit board plug-in with suppression diode plus blocking diode & led light
Same as “HL” without lead wires
MA Plug-in wire assembly
MB Plug-in wire assembly with ground wire
MC Plug-in wire assembly with led light
MD Plug-in wire assembly led light & ground wire
ME Plug-in wire assembly with suppression diode
MF Plug-in wire assembly with suppression diode & ground wire
*MG Plug-in wire assembly suppression diode plus led light
*MH Plug-in wire assembly suppression diode plus led light & ground wire
*MN Plug-in wire assembly with suppression diode plus blocking diode
*MP Plug-in wire assembly with suppression diode plus blocking diode & ground wire
MR Plug-in wire assembly with suppression diode plus blocking diode & led light
MS Plug-in wire assembly with suppression diode plus blocking diode & led light & ground wire
MJ Plug-in housing w/o wire assembly (“MA” option without wire assembly)
MM Plug-in housing w/o wire assembly (“MB” option without wire assembly)
* Blocking diode is in lead wire.
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
PIN #6
PIN #9
MOD. SD09
PIN #1
PIN #5
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 9
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 7 max.
• Max. 24 V=/5.4 W per solenoid
• 2 common wires
PIN #9
PIN #15
MOD. SD15
PIN #1
PIN #8
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 15
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 12 max.
• Max. 24 V=/5.4 W per solenoid
• 3 common wires
PIN #14
PIN #25
MOD. SD25
PIN #1
PIN #13
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 25
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 20 max.
• Max. 24 V=/5.4 W per solenoid
• 5 common wires
Note : Use desired MOD. number after circuit bar part number

O p t i o n s
OPTIONS
Connector termination details
CONNECTOR
SOL 1
SOL 2 SOL 3 SOL .. SOL 20 SOL 21 SOL 22 SOL 23 SOL 24
Single solenoid circuit bar
SOL 2 SOL 4 SOL 6 SOL 8 SOL 16 SOL 18 SOL 20 SOL 22 SOL 24
CONNECTOR
SOL 1 SOL 3 SOL 5 SOL 13 SOL 15 SOL 17 SOL 19 SOL 21 SOL 23
Double solenoid circuit bar
SD09 SD15 SD25
1
SOL. 1
1
SOL. 1
1
SOL. 1
2
SOL. 2
2
SOL. 2
2
SOL. 2
3
SOL. 3
3
SOL. 3
3
SOL. 3
4
SOL. 4
4
SOL. 4
4
SOL. 4
8
COMMON (+)
13
COMMON (+)
21
COMMON (+)
5
SOL. 5
5
SOL. 5
5
SOL. 5
6
SOL. 6
6
SOL. 6
6
SOL. 6
7
SOL. 7
7
SOL. 7
7
SOL. 7
9
COMMON (+)
8
SOL. 8
8
SOL. 8
14
COMMON (+)
22
COMMON (+)
9
SOL. 9
9
SOL. 9
10 SOL. 10
10 SOL. 10
11
SOL. 11
11
SOL. 11
12 SOL. 12
12 SOL. 12
15
COMMON (+)
23
COMMON (+)
13
SOL. 13
14 SOL. 14
15
SOL. 15
16 SOL. 16
24
COMMON (+)
17
18 SOL. 18
19
20 SOL. 20
SOL. 17
SOL. 19
25
COMMON (+)

Direct solenoid and solenoid pilot operated valves
Series 52
Circuit bar mounting
cylinder ports
in valve
add-on style
cylinder ports
in valve
cylinder ports
in base
add-on style
cylinder ports
in base
add-a-unit
stations for
CBM052A bar
add-a-unit
stations for
CBP052A bar
Manual operator
Solenoid
4-way pilot with balanced poppet
Bonded spool
2
Air return
3
1
SERIES FEATURES
• Patented MACSOLENOID ® for fastest possible response times
and virtually burn-out proof AC solenoid operation.
• Optional low watt DC solenoids.
• Various manual operators.
• Optional memory spring.
• Normally closed or normally open valve function.
• May be plugged for 2-way operation.
• Internal or external pilot.
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 52
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC 1/8” - 1/4” 1.2C v
cylinder ports
in valve
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
52A-xx-xxx-DM-Dxxx-xxx
SOLENOID OPERATOR
Port size
Pilot air
Single operator
NO valve
NC valve
Double operator
NO valve
NC valve
10
2
12
10
2
12
10
2
12
10
2
12
1/8” NPTF
Internal
3 1
52A-31-COA-DM-DXXX-XXX
52A-31-AOA-DM-DXXX-XXX
3 1
52A-11-AOA-DM-DXXX-XXX
3 1
52A-41-AOA-DM-DXXX-XXX
3 1
52A-21-AOA-DM-DXXX-XXX
1/4” NPTF
52A-31-BOA-DM-DXXX-XXX
52A-11-BOA-DM-DXXX-XXX
52A-41-BOA-DM-DXXX-XXX
52A-21-BOA-DM-DXXX-XXX
1/8” NPTF
External
52A-31-AOC-DM-DXXX-XXX
52A-11-AOC-DM-DXXX-XXX
52A-41-AOC-DM-DXXX-XXX
52A-21-AOC-DM-DXXX-XXX
1/4” NPTF
52A-31-BOC-DM-DXXX-XXX
52A-11-BOC-DM-DXXX-XXX
52A-41-BOC-DM-DXXX-XXX
52A-21-BOC-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X - X XX *
XX Voltage
X Wire length
X
Manual operator
XX
Electrical connection
JA 120/60, 110/50
A
18” (Flying leads)
1 Non-locking
KA
Square connector
JB 240/60, 220/50
J
Connector
2 Locking
KD
Square connector
with light
JC 24/60, 24/50
x
Other Options
x
Other Options
JB
Rectangular connector
DA 24VDC (5.4 W)
JD
Rectangular connector
with light
FB 24VDC (1.8 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR **
CBM052A-xxxxx-xx
BA
xx
Flying leads
Other Options
Port size
Pilot air
Spacing standard
19,5 mm
Spacing 26 mm
(Rectangular connector)
3/8” NPTF
Internal
CBM052A-00AAA-XX
CBM052A-02AAA-XX
External
CBM052A-00CAA-XX
CBM052A-02CAA-XX
Number of stations (03=3 stations)
* * Other options available. Consult factory.
3
O P T I O N S
52A-31-AOA-DM-DXXX-XXX
clic for memory spring (replace by 4).
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 52
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum to 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
7.3 mm
1.2C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35043 and seal 16524.
• Blanking plate : M-04001. • Seal (x3) : 17015-01. • Mounting screw (x2) : 35043.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
6,5 DIA.
2 HOLES
32,0
25,0
3
1
2
10
12
89,0
19,5
10
2
2
2
12
102,3
2
10
12
2
40,0
26,5
3
1
7,0
38,2
102,5
1/8” OPTIONAL COMMON
EXTERNAL PILOT.
14,5
51,5
69,5
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 52
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC 1/8” - 1/4” 1.2C v
add-on style
cylinder ports
in valve
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
52A-xx-xxx-DM-Dxxx-xxx
SOLENOID OPERATOR
Port size
Pilot air
Single operator
NO valve
NC valve
Double operator
NO valve
NC valve
10
2
12
10
2
12
10
2
12
10
2
12
1/8” NPTF
Internal
3 1
52A-31-COA-DM-DXXX-XXX
52A-31-AOA-DM-DXXX-XXX
3 1
52A-11-AOA-DM-DXXX-XXX
3 1
52A-41-AOA-DM-DXXX-XXX
3 1
52A-21-AOA-DM-DXXX-XXX
1/4” NPTF
52A-31-BOA-DM-DXXX-XXX
52A-11-BOA-DM-DXXX-XXX
52A-41-BOA-DM-DXXX-XXX
52A-21-BOA-DM-DXXX-XXX
1/8” NPTF
External
52A-31-AOC-DM-DXXX-XXX
52A-11-AOC-DM-DXXX-XXX
52A-41-AOC-DM-DXXX-XXX
52A-21-AOC-DM-DXXX-XXX
1/4” NPTF
52A-31-BOC-DM-DXXX-XXX
52A-11-BOC-DM-DXXX-XXX
52A-41-BOC-DM-DXXX-XXX
52A-21-BOC-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X - X XX *
XX Voltage
X Wire length
X
Manual operator
XX
Electrical connection
JA 120/60, 110/50
A
18” (Flying leads)
1 Non-locking
KA
Square connector
JB 240/60, 220/50
J
Connector
2 Locking
KD
Square connector
with light
JC 24/60, 24/50
x
Other Options
x
Other Options
JB
Rectangular connector
DA 24VDC (5.4 W)
JD
Rectangular connector
with light
FB 24VDC (1.8 W)
BA
Flying leads
DF 24VDC (12.7 W)
xx Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR **
CBM052A-xxxxx-xx
Port size
Pilot air
Spacing standard
19,5 mm
Spacing 26 mm
(Rectangular connector)
3/8” NPTF
Internal
CBM052A-00ABA-XX
CBM052A-02ABA-XX
External
CBM052A-00CBA-XX
CBM052A-02CBA-XX
Number of stations (03=3 stations)
* * Other options available. Consult factory.
O P T I O N S
Note : add-a-unit stations may be added to above bars. Clic here for model numbers.
52A-31-AOA-DM-DXXX-XXX
clic for memory spring (replace by 4).
Consult “Precautions” before use, installation or service of MAC Valves.

2
2
2
2
2
2
2
2
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 52
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum to 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
7.3 mm
1.2C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35043 and seal 16524.
• Blanking plate : M-04001. • Seal (x3) : 17015-01. • Mounting screw (x2) : 35043. • End plate kit (Internal) : M-52001-01.
• End plate kit (External) : M-52002-01.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
CL CL CL CL
40.0
102.3
XX
CL CL CL CL
1/8" OR 1/4"
PORTS AVAILABLE
ON THE BOTTOM OR SIDE
23.2
21.0
10.0
96.0
35.0
1 3
12 12
10
10
12
10
12
10
1
3
MODEL
69.5
52.5
29.0
14.5
6.5 DIA.
2 MTG.
HOLES
1 3
38.2
25.0
YY
21.0
10.8
16.0
3/8" N.P.T.F.
2 PLACES
BOTH ENDS
1/8" OPTIONAL
COMMON EXTERNAL
PILOT
CL CL CL CL
7.0
TYP.
YY
19.5
26
XX
113
119.5
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 52
Function Port size Flow (Max) Individual mounting
3/2 NO-NC 1/8” - 1/4” 1.2C v
cylinder ports
in base
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
52A-xx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Pilot air
Single operator
Double operator
NO valve
2
10
12
NC valve
2
10
12
10
NO valve
2
12
10
NC valve
2
12
Internal
3 1
52A-33-OOA-DM-DXXX-XXX
3 1
52A-13-OOA-DM-DXXX-XXX
3 1
52A-43-OOA-DM-DXXX-XXX
3 1
52A-23-OOA-DM-DXXX-XXX
External
52A-33-OOC-DM-DXXX-XXX
52A-13-OOC-DM-DXXX-XXX
52A-43-OOC-DM-DXXX-XXX
52A-23-OOC-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X - X XX *
Voltage
Wire length
Manual operator
XX X X XX
JA 120/60, 110/50
JB 240/60, 220/50
JC 24/60, 24/50
DA 24VDC (5.4 W)
FB 24VDC (1.8 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR **
A 18” (Flying leads)
1 Non-locking
KA
J Connector
2 Locking
KD
x Other Options
x Other Options
JB
JD
BA
xx
CBP052A-xxxxx-xx
Electrical connection
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
Port size (NPTF)
Pilot air
Spacing standard
19,5 mm
Spacing 26 mm
(Rectangular connector)
1/8” SIDE PORT
Internal
CBP052A-00AAA-XX
CBP052A-02AAA-XX
1/4” SIDE PORT
CBP052A-00AAD-XX
CBP052A-02AAD-XX
1/8” SIDE PORT
External
CBP052A-00EAA-XX
CBP052A-02EAA-XX
1/4” SIDE PORT
CBP052A-00EAD-XX
CBP052A-02EAD-XX
1/8” BOTTOM PORT
Internal
CBP052A-00BAA-XX
CBP052A-02BAA-XX
1/4” BOTTOM PORT
CBP052A-00BAD-XX
CBP052A-02BAD-XX
1/8” BOTTOM PORT
External
CBP052A-00FAA-XX
CBP052A-02FAA-XX
1/4” BOTTOM PORT
CBP052A-00FAD-XX
CBP052A-02FAD-XX
Number of stations (03=3 stations) ** Other options available. Consult factory.
O P T I O N S
52A-33-OOA-DM-DXXX-XXX
clic for memory spring (replace by 6).
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 52
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum to 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
7.3 mm
1.2C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35043 and seal 16524.
• Blanking plate : M-52003. • Seal (x3) : 17013-01. • Mounting screw (x2) : 35043.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
25,0
3
1
2
10
12
90,5
19,5
2
2
10
12
2
2
10,5
10
2
12
16,0
3
1
7,0
36,0
96,0
32,0
102,3
23,2
21,0
10,0
10,0
14,5
29,0
51,5
3/8"
OPTIONAL 1/8" COMMON
EXTERNAL PILOT
25,0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 52
Function Port size Flow (Max) Individual mounting
3/2 NO-NC 1/8” - 1/4” 1.2C v
add-on style
cylinder ports
in base
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
52A-xx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Pilot air
Single operator
Double operator
NO valve
2
10
12
NC valve
2
10
12
10
NO valve
2
12
10
NC valve
2
12
Internal
3 1
52A-33-OOA-DM-DXXX-XXX
3 1
52A-13-OOA-DM-DXXX-XXX
3 1
52A-43-OOA-DM-DXXX-XXX
3 1
52A-23-OOA-DM-DXXX-XXX
External
52A-33-OOC-DM-DXXX-XXX
52A-13-OOC-DM-DXXX-XXX
52A-43-OOC-DM-DXXX-XXX
52A-23-OOC-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X - X XX *
Voltage
Wire length
Manual operator
XX X X XX
JA 120/60, 110/50
JB 240/60, 220/50
JC 24/60, 24/50
DA 24VDC (5.4 W)
FB 24VDC (1.8 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR **
A 18” (Flying leads)
1 Non-locking
KA
J Connector
2 Locking
KD
x Other Options
x Other Options
JB
JD
BA
xx
CBP052A-xxxxx-xx
Electrical connection
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
Port size (NPTF)
Pilot air
Spacing standard
19,5 mm
Spacing 26 mm
(Rectangular connector)
1/8” SIDE PORT
Internal
CBP052A-00ABA-XX
CBP052A-02ABA-XX
1/4” SIDE PORT
CBP052A-00ABD-XX
CBP052A-02ABD-XX
1/8” SIDE PORT
External
CBP052A-00EBA-XX
CBP052A-02EBA-XX
1/4” SIDE PORT
CBP052A-00EBD-XX
CBP052A-02EBD-XX
1/8” BOTTOM PORT
Internal
CBP052A-00BBA-XX
CBP052A-02BBA-XX
1/4” BOTTOM PORT
CBP052A-00BBD-XX
CBP052A-02BBD-XX
1/8” BOTTOM PORT
External
CBP052A-00FBA-XX
CBP052A-02FBA-XX
1/4” BOTTOM PORT
CBP052A-00FBD-XX
CBP052A-02FBD-XX
Number of stations (03=3 stations) ** Other options available. Consult factory.
O P T I O N S
Note : add-a-unit stations may be added to above bars.
Clic here for model numbers.
52A-33-OOA-DM-DXXX-XXX
clic for memory spring (replace by 6).
Consult “Precautions” before use, installation or service of MAC Valves.

2
2
2
2
2
2
2
2
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 52
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum to 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
7.3 mm
1.2C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35043 and seal 16524.
• Blanking plate : M-52003. • Seal (x3) : 17013-01. • Mounting screw (x2) : 35043. • End plate kit (Internal) : M-52001-01.
• End plate kit (External) : M-52002-01.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
10.0
CL
CL
CL
CL
1/8" OR 1/4"
PORTS AVAILABLE
ON THE BOTTOM OR SIDE
40.0
2
2
2
2
102.3
XX
CL
CL
CL
CL
23.2
21.0
10.0
96.0
1
12
12
12
12
1
MODEL
69.5
6.5 DIA.
2 MTG.
HOLES
1
3
10
10
10
10
3
14.5
29.0
52.5
3
2
2
2
2
ZZ
38.2
25.0
YY
21.0
10.8
16.0
3/8" N.P.T.F.
2 PLACES
BOTH ENDS
1/8" OPTIONAL
COMMON EXTERNAL
PILOT
YY
CL
CL
XX
CL
CL
PORT
7.0
TYP.
ZZ
19.5
113
1/8”
36.0
26
119.5
1/4”
40.0
Note: Bottom & side cylinder ports not available on the same station
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 52
Function Port size Flow (Max) Circuit bar mounting
3/2 NO-NC 1/8” - 1/4” 1.2C v
add-a-unit
stations for
CBM052A bar
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
52A-xx-xxx-DM-Dxxx-xxx
SOLENOID OPERATOR
Port size
Pilot air
Single operator
NO valve
NC valve
Double operator
NO valve
NC valve
10
2
12
10
2
12
10
2
12
10
2
12
1/8” NPTF
Internal
3 1
52A-31-COA-DM-DXXX-XXX
52A-31-AOA-DM-DXXX-XXX
3 1
52A-11-AOA-DM-DXXX-XXX
3 1
52A-41-AOA-DM-DXXX-XXX
3 1
52A-21-AOA-DM-DXXX-XXX
1/4” NPTF
52A-31-BOA-DM-DXXX-XXX
52A-11-BOA-DM-DXXX-XXX
52A-41-BOA-DM-DXXX-XXX
52A-21-BOA-DM-DXXX-XXX
1/8” NPTF
External
52A-31-AOC-DM-DXXX-XXX
52A-11-AOC-DM-DXXX-XXX
52A-41-AOC-DM-DXXX-XXX
52A-21-AOC-DM-DXXX-XXX
1/4” NPTF
52A-31-BOC-DM-DXXX-XXX
52A-11-BOC-DM-DXXX-XXX
52A-41-BOC-DM-DXXX-XXX
52A-21-BOC-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X - X XX *
XX Voltage
X Wire length
X
Manual operator
XX
Electrical connection
JA 120/60, 110/50
A
18” (Flying leads)
1 Non-locking
KA
Square connector
JB 240/60, 220/50
J
Connector
2 Locking
KD
Square connector
with light
JC 24/60, 24/50
x
Other Options
x
Other Options
JB
Rectangular connector
DA 24VDC (5.4 W)
JD
Rectangular connector
with light
FB 24VDC (1.8 W)
BA
Flying leads
DF 24VDC (12.7 W)
xx Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR **
CBM052A-xxxxx-xx
Port size
Pilot air
Spacing standard
21 mm
Spacing 26 mm
(Rectangular connector)
3/8” NPTF
Internal
CBM052A-01AEA-XX
CBM052A-02AEA-XX
External
CBM052A-01CEA-XX
CBM052A-02CEA-XX
Number of stations (01=1 station)
* * Other options available. Consult factory.
O P T I O N S
Note : add-a-unit stations available in lengths up to 4 stations (01, 02, 03 or 04).
52A-31-AOA-DM-DXXX-XXX
clic for memory spring (replace by 4).
Consult “Precautions” before use, installation or service of MAC Valves.

2
2
2
2
2
2
2
2
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 52
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum to 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
7.3 mm
1.2C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35043 and seal 16524.
• Blanking plate : M-04001. • Seal (x3) : 17015-01. • Mounting screw (x2) : 35043.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
CL CL CL CL
40.0
102.3
XX
CL CL CL CL
1/8" OR 1/4"
PORTS AVAILABLE
ON THE BOTTOM OR SIDE
23.2
21.0
10.0
96.0
35.0
1 3
12 12
10
10
12
10
12
10
1
3
MODEL
69.5
52.5
29.0
14.5
6.5 DIA.
2 MTG.
HOLES
1 3
38.2
25.0
YY
21.0
10.8
16.0
3/8" N.P.T.F.
2 PLACES
BOTH ENDS
1/8" OPTIONAL
COMMON EXTERNAL
PILOT
CL CL CL CL
7.0
TYP.
YY
19.5
26
XX
113
119.5
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 52
Function Port size Flow (Max) Individual mounting
3/2 NO-NC 1/8” - 1/4” 1.2C v
add-a-unit
stations for
CBP052A bar
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
52A-xx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Pilot air
Single operator
Double operator
NO valve
2
10
12
NC valve
2
10
12
10
NO valve
2
12
10
NC valve
2
12
Internal
3 1
52A-33-OOA-DM-DXXX-XXX
3 1
52A-13-OOA-DM-DXXX-XXX
3 1
52A-43-OOA-DM-DXXX-XXX
3 1
52A-23-OOA-DM-DXXX-XXX
External
52A-33-OOC-DM-DXXX-XXX
52A-13-OOC-DM-DXXX-XXX
52A-43-OOC-DM-DXXX-XXX
52A-23-OOC-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X - X XX *
Voltage
Wire length
Manual operator
XX X X XX
JA 120/60, 110/50
JB 240/60, 220/50
JC 24/60, 24/50
DA 24VDC (5.4 W)
FB 24VDC (1.8 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR **
A 18” (Flying leads)
1 Non-locking
KA
J Connector
2 Locking
KD
x Other Options
x Other Options
JB
JD
BA
xx
CBP052A-xxxxx-xx
Electrical connection
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
Port size (NPTF)
Pilot air
Spacing standard
21 mm
Spacing 26 mm
(Rectangular connector)
1/8” SIDE PORT
Internal
CBP052A-01AEA-XX
CBP052A-02AEA-XX
1/4” SIDE PORT
CBP052A-01AED-XX
CBP052A-02AED-XX
1/8” SIDE PORT
External
CBP052A-01EEA-XX
CBP052A-02EEA-XX
1/4” SIDE PORT
CBP052A-01EED-XX
CBP052A-02EED-XX
1/8” BOTTOM PORT
Internal
CBP052A-01BEA-XX
CBP052A-02BEA-XX
1/4” BOTTOM PORT
CBP052A-01BED-XX
CBP052A-02BED-XX
1/8” BOTTOM PORT
External
CBP052A-01FEA-XX
CBP052A-02FEA-XX
1/4” BOTTOM PORT
CBP052A-01FED-XX
CBP052A-02FED-XX
Number of stations (03=3 stations) ** Other options available. Consult factory.
O P T I O N S
Note : add-a-unit stations available in lengths up to
4 stations (01, 02, 03 or 04).
52A-33-OOA-DM-DXXX-XXX
clic for memory spring (replace by 6).
Consult “Precautions” before use, installation or service of MAC Valves.

2
2
2
2
2
2
2
2
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 52
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum to 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
7.3 mm
1.2C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35043 and seal 16524.
• Blanking plate : M-52003. • Seal (x3) : 17013-01. • Mounting screw (x2) : 35043.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
10.0
CL
CL
CL
CL
1/8" OR 1/4"
PORTS AVAILABLE
ON THE BOTTOM OR SIDE
40.0
2
2
2
2
102.3
XX
CL
CL
CL
CL
23.2
21.0
10.0
96.0
1
12
12
12
12
1
MODEL
69.5
6.5 DIA.
2 MTG.
HOLES
1
3
10
10
10
10
3
52.5
29.0
14.5
3
2
2
2
2
ZZ
38.2
25.0
YY
21.0
10.8
16.0
3/8" N.P.T.F.
2 PLACES
BOTH ENDS
1/8" OPTIONAL
COMMON EXTERNAL
PILOT
YY
CL
CL
XX
CL
CL
PORT
7.0
TYP.
ZZ
19.5
113
1/8”
36.0
26
119.5
1/4”
40.0
Note: Bottom & side cylinder ports not available on the same station
Consult “Precautions” before use, installation or service of MAC Valves.

Section 2 Options
Consult “Precautions” before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Codification table for voltages / Wire length / Manual operator / Electrical connection
VALVE CODE ➤
D M - D XX X - X XX
1 2 3 4
OPTIONS AVAILABLE FOR
- pilot operated valves 400, 52 & 92 Series
Consult “Precautions”before use, installation or service of MAC Valves.

OPTIONS
Back
1. VOLTAGE
- D XX X - X XX VOLTAGE
DB 12 VDC (5.4 W)
DC 12 VDC (7.5 W)
DD 24 VDC (7.3 W)
DE 12 VDC (12.7 W)
DK 110 VDC (5.8 W)
DJ 28 VDC (5.7 W)
DL 64 VDC (6.0 W)
DM 36 VDC (5.8 W)
DN 6 VDC (6.0 W)
DR 90 VDC (6,6 W)
DS 110 VDC (7.3 W), 100 VDC (6.0 W)
DT 75 VDC (5.6 W)
DP 48 VDC (5.8 W)
FA 12 VDC (1.8 W)
FE 12 VDC (2.4 W)
FF 24 VDC (2.4 W)
JD 100/60, 100/50, 110/60
2. WIRE LENGTH
- D XX X - X XX WIRE LENGTH
B 24”
C 36”
D 48”
E 72”
F 96”
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Back
3. MANUAL OPERATOR
- D XX X - X XX MANUAL OPERATOR
0 No operator
1 Non-locking recessed
2 Locking recessed
3 Non-locking extended
4 Locking extended
4. ELECTRICAL CONNECTION
- D XX X - X XX ELECTRICAL CONNECTION
BA Flying leads
BK BA with protection diode
BL BA with protection varistor
CA 1/2" NPS conduit
JB Rectangular connector
JD Rectangular connector with light
JM Rectangular connector, male only
KA Square connector
KB Square connector with protection diode
KC Square connector with protection varistor
KD Square connector with light
KE Square connector with light and protection diode
KF Square connector with light and protection varistor
KJ Square connector (male only)
KK Square connector with protection diode (male only)
KL Square connector with protection varistor (male only)
TA Dual tabs
TB TA with protection diode
TD TA with light
TE TA with light and protection diode
TJ Dual tabs (male only)
TK TJ with protection diode
TM TJ with light
TN TJ with light and protection diode
*DN Plug-in with diode
*DP Plug-in with M.O.V.
*DH Plug-in with diode & ground
*DJ Plug-in with M.O.V & ground
* These options only apply to the 92 series. All others are for the 400 and 52 series.
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
PIN #6
PIN #9
MOD. SD09
PIN #1
PIN #5
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 9
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 7 max.
• Max. 24 V=/5.4 W per solenoid
• 2 common wires
PIN #9
PIN #15
MOD. SD15
PIN #1
PIN #8
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 15
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 12 max.
• Max. 24 V=/5.4 W per solenoid
• 3 common wires
PIN #14
PIN #25
MOD. SD25
PIN #1
PIN #13
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 25
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 20 max.
• Max. 24 V=/5.4 W per solenoid
• 5 common wires
Note : Use desired MOD. number after circuit bar part number

O p t i o n s
OPTIONS
Connector termination details
CONNECTOR
SOL 1
SOL 2 SOL 3 SOL .. SOL 20 SOL 21 SOL 22 SOL 23 SOL 24
Single solenoid circuit bar
SOL 2 SOL 4 SOL 6 SOL 8 SOL 16 SOL 18 SOL 20 SOL 22 SOL 24
CONNECTOR
SOL 1 SOL 3 SOL 5 SOL 13 SOL 15 SOL 17 SOL 19 SOL 21 SOL 23
Double solenoid circuit bar
SD09 SD15 SD25
1
SOL. 1
1
SOL. 1
1
SOL. 1
2
SOL. 2
2
SOL. 2
2
SOL. 2
3
SOL. 3
3
SOL. 3
3
SOL. 3
4
SOL. 4
4
SOL. 4
4
SOL. 4
8
COMMON (+)
13
COMMON (+)
21
COMMON (+)
5
SOL. 5
5
SOL. 5
5
SOL. 5
6
SOL. 6
6
SOL. 6
6
SOL. 6
7
SOL. 7
7
SOL. 7
7
SOL. 7
9
COMMON (+)
8
SOL. 8
8
SOL. 8
14
COMMON (+)
22
COMMON (+)
9
SOL. 9
9
SOL. 9
10 SOL. 10
10 SOL. 10
11
SOL. 11
11
SOL. 11
12 SOL. 12
12 SOL. 12
15
COMMON (+)
23
COMMON (+)
13
SOL. 13
14 SOL. 14
15
SOL. 15
16 SOL. 16
24
COMMON (+)
17
18 SOL. 18
19
20 SOL. 20
SOL. 17
SOL. 19
25
COMMON (+)

Direct solenoid and solenoid pilot operated valves
Series 44
Circuit bar mounting
non plug-in
cylinder ports
in base
non plug-in
cylinder ports
in valve
plug-in
plug-in
with F. C.
plug-in
with Pr. Reg.
plug-in
with Pr. Reg.
and F. C.
add-on style
plug-in
add-on style
plug-in
with F. C.
add-on style
plug-in
with Pr. Reg.
add-on style
plug-in
with Pr. Reg.
and F. C.
plug-in
add-a-unit
stations
plug-in
add-a-unit
stations
with F. C.
plug-in
add-a-unit
stations
with Pr. Reg.
plug-in
add-a-unit
stations with
F. C. and Pr. Reg.
plug-in with
pre-wired
connector
plug-in with
F. C. and
pre-wired
connector
plug-in with
Pr. Reg. and
pre-wired
connector
din rail,
plug-in with
pre-wired
connector
Manual operator
Armature
Coil
Push Pin
B A
IN
EA
“D” seal
4 Balanced poppets
Valve spring
EB
SERIES FEATURES
• High force MACSOLENOID ® .
• 10mm direct operated.
• # 10-32 or M5 ports.
• Rated for lubricated or non-lubricated service.
• Cylinder ports in valve or in circuit bar.
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32 0.093C v
non plug-in
cylinder ports
in base
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-Gxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Valve less base
Valve
44B-LOO-GXXX-XXX
Valve for use with
external flow controls
B A
IN EA B EB A
IN EA
EB
44B-MOO-GXXX-XXX
SOLENOID OPERATOR ➤
G XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
A 18”
1 Non-locking
BA
Flying leads
DC 24VDC (1.8 W)
C 36”
BT
Flying leads
with light
DD 24VDC (2.5 W)
x
Other Options
KA
Mini connector
DF 24VDC (4.0 W)
KT
Mini connector
with light
xx
Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR
Port size
EBP44B-xxxx-xx
Side cylinder ports
Bottom cylinder ports
M5
# 10-32
EBP44B-001D-XX
EBP44B-001B-XX
EBP44B-002D-XX
EBP44B-002B-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.093 C v , 2.5 W : 0.077 C v , 1,8 W : 0.057 C v , 1.0 W : 0.048 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 3.4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003.
• Isolation of inlet and/or exhaust. Special bar. Consult Factory.
DIMENSIONS
M5 VALVE MTG. SCR.
24,8
59,5
10,0
B
B
16,25
5,3
15,0
A
A
15,0
71,2
15,5
2,5
15,5
10,5 5,0
EA IN EB
15,5
10,5
10,5
1/8” NPTF PORTS
18,3
44,8
5,5
4 Ø 4,3
56,3
57,3
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size (Inlet & Exhaust) Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC # 10-32 - 1/8” 0.093C v
non plug-in
cylinder ports
in valve
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-Gxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Valve port size
M5
# 10-32
Valve
44B-ABA-GXXX-XXX
44B-AAA-GXXX-XXX
Valve for use with
external flow controls
B A
IN EA B EB A
IN EA
EB
44B-BBA-GXXX-XXX
44B-BAA-GXXX-XXX
SOLENOID OPERATOR ➤
G XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
A 18”
1 Non-locking
BA
Flying leads
DC 24VDC (1.8 W)
C 36”
BT
Flying leads
with light
DD 24VDC (2.5 W)
x
Other Options
KA
Mini connector
DF 24VDC (4.0 W)
KT
Mini connector
with light
xx
Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR
EBM44A-xxxx-xx
Port size
COMMON INLET & EXHAUST
# 10-32
1/8” NPTF
EBM44A-001B-XX
EBM44A-002A-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.093 C v , 2.5 W : 0.077 C v , 1,8 W : 0.057 C v , 1.0 W : 0.048 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 3.5 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve mounting kit (M5) : M-44001-21. • Valve mounting kit (1/8") : M-44001-01. • Blanking plate : 30426-A.
• Isolation of inlet and/or exhaust. Special bar. Consult Factory.
DIMENSIONS
J
K
A B
B
Ø 4,2 MTG. HOLES
H
A
D
E
F
G
14,0
C L C L
10,50
4,00
C
38,5
Port size
A
B
C
D
E
F
G
H
J
K
1/8”
16.0
47.5
69.2
8.5
24.0
39.5
48.0
8.0
31.85
16.15
M5
12.0
43.5
63.2
5.0
17.0
29.0
34.0
6.0
23.00
11.00
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32 0.09C v plug-in
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-LOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER CIRCUIT BAR
Port size
M5
# 10-32
ECD044B-00xxx-AOxx
Side cylinder ports
(10.5 mm)
ECD044B-001AD-AOXX
ECD044B-001AB-AOXX
Bottom cylinder ports
(10.5 mm)
ECD044B-002AD-AOXX
ECD044B-002AB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
clic for multi-pin connector option (9, 15 or 25).
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.09 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
11.4
18.5
61.2
L
24.5
13.8
90.7
26.0
38.6
84.0
33.5
23.0
40.0
32.3
19.9
5.0
13.0
20.1
20.5
24.9
17.7
22.5
33.0
Number of
stations
DIM. L
2
55.5
3
66.0
4
76.5
5
87.0
6
97.5
7 8 9 10
108.0 118.5 129.0 139.5
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32 0.08C v
plug-in
with F. C.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-MOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS
Port size
M5
# 10-32
Side cylinder ports
(10.5 mm)
ECD044B-005AD-AOXX
ECD044B-005AB-AOXX
ECD044B-00xxx-AOxx
Bottom cylinder ports
(10.5 mm)
ECD044B-006AD-AOXX
ECD044B-006AB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
clic for multi-pin connector option (9, 15 or 25).
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.09 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Flow control needle (x2): N-44002.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
L
11.4
18.5
61.2
24.5
13.8
90.7
26.0
38.6
84.0
33.5
23.0
40.0
32.3
19.9
5.0
17.7
13.0
20.1
20.5
24.9
22.5
33.0
Number of
stations
DIM. L
2
55.5
3
66.0
4
76.5
5
87.0
6
97.5
7 8 9 10
108.0 118.5 129.0 139.5
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32 0.08C v
plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-LOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER CIRCUIT BAR FOR PRESSURE REGULATORS** (to be ordered separately)
ECD044B-00xxx-AOxx
Port size
M5
# 10-32
Bottom cylinder ports
(10,5 mm)
ECD044B-004AD-A0-XX
ECD044B-004AB-A0-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
clic for multi-pin connector option (9, 15 or 25).
** Pressure Regulators :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.09 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Pressure range regulators : (0-100 PSI).
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Blanking plate regulator: N-44003.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
L
61.2
18.5
11.4
144.3
24.5
13.8
90.7
26.0
38.6
84.0
32.3
19.9
13.0
20.5
33.5
20.1
24.9
23.0
40.0
5.0
17.7
22.5
33.0
Number of
stations
DIM. L
2
55.5
3
66.0
4
76.5
5
87.0
6
97.5
7 8 9 10
108.0 118.5 129.0 139.5
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32 0.07C v
plug-in
with Pr. Reg.
and F. C.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-MOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
ECD044B-00xxx-AOxx
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS AND PRESSURE REGULATORS** (pressure regulators to be ordered separately)
Port size
M5
# 10-32
Bottom cylinder ports
(10,5 mm)
ECD044B-007AD-A0-XX
ECD044B-007AB-A0-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
clic for multi-pin connector option (9, 15 or 25).
** Pressure Regulators :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.07 C v , 2.5 W : 0.06 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Pressure range regulators : (0-100 PSI).
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Blanking plate regulator: N-44003.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
L
61.2
18.5
11.4
24.5
144.3
13.8
90.7
26.0
38.6
84.0
32.3
19.9
13.0
20.5
33.5
20.1
24.9
23.0
40.0
5.0
17.7
22.5
33.0
Number of
stations
DIM. L
2
55.5
3
66.0
4
76.5
5
87.0
6
97.5
7 8 9 10
108.0 118.5 129.0 139.5
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32 0.09C v
add-on style
plug-in
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-LOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER CIRCUIT BAR
Port size
M5
# 10-32
ECD044B-00xxx-AOxx
Side cylinder ports
(10.5 mm)
ECD044B-001BD-AOXX
ECD044B-001BB-AOXX
Bottom cylinder ports
(10.5 mm)
ECD044B-002BD-AOXX
ECD044B-002BB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
clic for multi-pin connector option (9, 15 or 25).
add-a-unit stations may be added to above bars.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.09 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
24.5
41.5
10.5
10.5
15.5
20.0
18.5
11.3
13.8
26.0
EXH
90.7
38.6
IN
64.2
EXH
84.0
60.5
B
A A
B
B
A
A
A
19.9
20.9
31.3
32.3
60.5
17.7
5.0
A
A
13.0
B
B B
B
20.5
10.5
25.0
20.7
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32 0.08C v
add-on style
plug-in
with F. C.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-MOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS
Port size
M5
# 10-32
Side cylinder ports
(10.5 mm)
ECD044B-005BD-AOXX
ECD044B-005BB-AOXX
ECD044B-00xxx-AOxx
Bottom cylinder ports
(10.5 mm)
ECD044B-006BD-AOXX
ECD044B-006BB-AOXX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
clic for multi-pin connector option (9, 15 or 25).
add-a-unit stations may be added to above bars.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.09 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Flow control needle (x2): N-44002.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
41.5
15.0
15.0
15.5
24.5
20.0
18.5
11.3
13.8
90.7
26.0
EXH
38.6
IN
84.0
64.2
EXH
60.5 17.7 5.0
60.5
A
A
A
B
A
B
B
A
19.9
20.9
31.3
32.3
B
B
A
A
B
B
13.0
20.5
10.9
20.6
25.0
10.5
4.4
5.1
23.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32 0.08C v
add-on style
plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-LOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER CIRCUIT BAR FOR PRESSURE REGULATORS** (to be ordered separately)
ECD044B-00xxx-AOxx
Port size
M5
# 10-32
Bottom cylinder ports
(10,5 mm)
ECD044B-004BD-A0-XX
ECD044B-004BB-A0-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
clic for multi-pin connector option (9, 15 or 25).
add-a-unit stations may be added to above bars.
** Pressure Regulators :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.09 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Pressure range regulators : (0-100 PSI).
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Blanking plate regulator: N-44003.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
41.5
10.5
10.5
24.5
20.0
18.5
11.3
15.5
144.3
13.8
90.7
38.6
64.2
26.0
IN
EXH
EXH
25.0
20.5
13.0
10.5
84.0
K
C
O
L
K
C
O
L
- +
- +
A
K
O C
L
K
+
O C
L
-
-
+
A
A
A
60.5
17.7
5.0
60.5
B
B
B
19.9
20.9
31.3
32.3
20.7
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32 0.07C v
plug-in
with Pr. Reg.
add-on style
and F. C.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-MOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
ECD044B-00xxx-AOxx
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS AND PRESSURE REGULATORS** (pressure regulators to be ordered separately)
Port size
M5
# 10-32
Bottom cylinder ports
(10,5 mm)
ECD044B-007BD-A0-XX
ECD044B-007BB-A0-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
clic for multi-pin connector option (9, 15 or 25).
add-a-unit stations may be added to above bars.
** Pressure Regulators :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

IN
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.07 C v , 2.5 W : 0.06 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Pressure range regulators : (0-100 PSI).
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Blanking plate regulator: N-44003.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
87.0
144.3
90.7
26.0
13.8
EXH
10.5
4.4
38.6
5.1
84.0
64.2
EXH
25.0
20.5
13.0
41.5
15.5
11.4
15.0
15.0
18.5
60.5
17.7
5.0
20.0
24.5
60.5
B
A
B
A
B
A
K
+
O C
L
-
K
+
O C
L
-
K
+
O C
L
-
K
+
O C
L
-
19.9 20.9 31.3 32.3
10.9
20.6
23.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2 M5 - #10-32 0.09C v
plug-in
add-a-unit
stations
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-LOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER CIRCUIT BAR
Port size
ECD044B-00xxx-AOxx
Side cylinder ports
Bottom cylinder ports
M5
# 10-32
ECD044B-001CD-AOXX
ECD044B-001CB-AOXX
ECD044B-002CD-AOXX
ECD044B-002CB-AOXX
Number of stations (03=3 stations) - Maximum length is 4 stations
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
when add-a-unit stations are added to bars with a multi-pin connector,
MOD. SD03 should be included with add-a-unit model number.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.09 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
24.5
41.5
10.5
10.5
15.5
20.0
18.5
11.3
13.8
26.0
EXH
90.7
38.6
IN
64.2
EXH
84.0
60.5
B
A A
B
B
A
A
A
19.9
20.9
31.3
32.3
60.5
17.7
5.0
A
A
13.0
B
B B
B
20.5
10.5
25.0
20.7
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2 M5 - #10-32 0.08C v
add-a-unit
stations
plug-in
with F. C.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-MOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS
Port size
Side cylinder ports
ECD044B-00xxx-AOxx
Bottom cylinder ports
M5
# 10-32
ECD044B-005CD-AOXX
ECD044B-005CB-AOXX
ECD044B-006CD-AOXX
ECD044B-006CB-AOXX
Number of stations (03=3 stations) - Maximum length is 4 stations
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
when add-a-unit stations are added to bars with a multi-pin connector,
MOD. SD03 should be included with add-a-unit model number.
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.09 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Flow control needle (x2): N-44002.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
41.5
15.0
15.0
15.5
24.5
20.0
18.5
11.3
13.8
90.7
26.0
EXH
38.6
IN
84.0
64.2
EXH
60.5 17.7 5.0
60.5
A
A
A
B
A
B
B
A
19.9
20.9
31.3
32.3
B
B
A
A
B
B
13.0
20.5
10.9
20.6
25.0
10.5
4.4
5.1
23.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2 M5 - #10-32 0.08C v
add-a-unit
stations
plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-LOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER CIRCUIT BAR FOR PRESSURE REGULATORS ** (to be ordered separately)
Port size
M5
# 10-32
ECD044B-00xxx-AOxx
Bottom cylinder ports
(10,5 mm)
ECD044B-004CD-AOXX
ECD044B-004CB-AOXX
Number of stations (03=3 stations) - Maximum length is 4 stations
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
when add-a-unit stations are added to bars with a multi-pin connector,
MOD. SD03 should be included with add-a-unit model number.
** Regulator ordered separately-see below :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.09 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Pressure range regulators : (0-100 PSI).
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Blanking plate regulator: N-44003.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
24.5
20.0
41.5
10.5
10.5
18.5
11.3
15.5
144.3
13.8
90.7
38.6
64.2
26.0
IN
EXH
EXH
25.0
20.5
13.0
10.5
84.0
K
C
O
L
K
C
O
L
- +
- +
A
K
O C
L
K
+
O C
L
-
-
+
A
A
A
60.5
17.7
5.0
60.5
B
B
B
19.9
20.9
31.3
32.3
20.7
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2 M5 - #10-32 0.07C v
add-a-unit
stations with
plug-in
F. C. and Pr. Reg.
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-MOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
ECD044B-00xxx-AOxx
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS AND PRESSURE REGULATORS ** (pressure regulators to be ordered separately)
Port size
M5
# 10-32
Bottom cylinder ports
(10,5 mm)
ECD044B-007CD-AOXX
ECD044B-007CB-AOXX
Number of stations (03=3 stations) - Maximum length is 4 stations
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
when add-a-unit stations are added to bars with a multi-pin connector,
MOD. SD03 should be included with add-a-unit model number.
** Regulator ordered separately-see below :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
Consult “Precautions” before use, installation or service of MAC Valves.

IN
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.07 C v , 2.5 W : 0.06 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Pressure range regulators : (0-100 PSI).
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Blanking plate regulator: N-44003.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP Threads.
DIMENSIONS
87.0
144.3
90.7
26.0
13.8
EXH
10.5
4.4
38.6
5.1
84.0
64.2
EXH
25.0
20.5
13.0
41.5
15.5
11.4
15.0
15.0
18.5
60.5
17.7
5.0
20.0
24.5
60.5
B
A
B
A
B
A
K
+
O C
L
-
K
+
O C
L
-
K
+
O C
L
-
K
+
O C
L
-
19.9 20.9 31.3 32.3
10.9
20.6
23.0
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32, 0.10C v
4 mm tube receptacle
plug-in with
pre-wired
connector
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-LOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
HOW TO ORDER CIRCUIT BAR **
ECF44B-00xxx-xxxx
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
Port size
M5
# 10-32
4 mm tube receptacle
Side cylinder ports
(10.5 mm)
ECF44B-00BDA-ZZXX
ECF44B-00BBA-ZZXX
ECF44B-00BEA-ZZXX
Bottom cylinder ports
(10.5 mm)
ECF44B-00CDA-ZZXX
ECF44B-00CBA-ZZXX
---------
Number of stations (03=3 stations)
** Other options available Consult factory.
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
ZZ Connector
LA 9 Pin Sub D*
LB 15 Pin Sub D*
LC 25 Pin Sub D*
LD 10 Pin Ribbon Cable**
LE 16 Pin Ribbon Cable**
LF 20 Pin Ribbon Cable**
LG 26 Pin Ribbon Cable**
LH 3/8” NPSM Conduit Port
Standard Base Wires
Consult “Precautions” before use, installation or service of MAC Valves.
L=Left Side; R=Right Side
ZZ Connector
RA 9 Pin Sub D*
RB 15 Pin Sub D*
RC 25 Pin Sub D*
RD 10 Pin Ribbon Cable**
RE 16 Pin Ribbon Cable**
RF 20 Pin Ribbon Cable**
RG 26 Pin Ribbon Cable**
RH 3/8” NPSM Conduit Port
Standard Base Wires
* MIL. Spec; MIL-C-24308
** MIL. Spec; MIL-C-83503
Note: Left and right end is determined by facing conduit passage.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP threads.
DIMENSIONS
83.5
8.7
3.5
2.9
13.3
EXH
76.2
70.4
14.9
13.6
EXH
IN
10.5 17.4
22.0
A
A
10.6
10.5
49.5
63.5
2.8
13.2
51.0
B
B
B
B
A
A
A
B
A A
B
B
A
B
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32 0.09C v
F. C. and
pre-wired
plug-in with
connector
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-MOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER CIRCUIT BAR WITH FLOW CONTROLS **
Port size
M5
# 10-32
ECF44B-00xxx-xxxx
Bottom cylinder ports
(10.5 mm)
ECF44B-00EDA-ZZXX
ECF44B-00EBA-ZZXX
Number of stations (03=3 stations)
** Other options available Consult factory.
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
ZZ Connector
LA 9 Pin Sub D*
LB 15 Pin Sub D*
LC 25 Pin Sub D*
LD 10 Pin Ribbon Cable**
LE 16 Pin Ribbon Cable**
LF 20 Pin Ribbon Cable**
LG 26 Pin Ribbon Cable**
LH 3/8” NPSM Conduit Port
Standard Base Wires
Consult “Precautions” before use, installation or service of MAC Valves.
L=Left Side; R=Right Side
ZZ Connector
RA 9 Pin Sub D*
RB 15 Pin Sub D*
RC 25 Pin Sub D*
RD 10 Pin Ribbon Cable**
RE 16 Pin Ribbon Cable**
RF 20 Pin Ribbon Cable**
RG 26 Pin Ribbon Cable**
RH 3/8” NPSM Conduit Port
Standard Base Wires
* MIL. Spec; MIL-C-24308
** MIL. Spec; MIL-C-83503
Note: Left and right end is determined by facing conduit passage.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.09 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Flow control needle (x2): N-44002.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP threads.
DIMENSIONS
83.5
76.2
70.4
13.3
14.9
13.6
EXH EXH
IN
22.0
B
B
B
B
49.5
63.5
2.9
3.5
8.7
A
A
A
A
10.6
51.0
10.5
17.4
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32 0.09C v
Pr. Reg. and
pre-wired
plug-in with
connector
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-LOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER CIRCUIT BAR FOR PRESSURE REGULATORS ** (to be ordered separately)
Port size
M5
# 10-32
ECF44B-00xxx-xxxx
Bottom cylinder ports
(10.5 mm)
ECF44B-00GDA-ZZXX
ECF44B-00GBA-ZZXX
Number of stations (03=3 stations)
** Other options available Consult factory.
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
** Pressure Regulators :
PR44A-AOxx
Y=A (no gage port)
Y=B (with gage port)
X=A (0 to 100 PSI)
X=B (0 to 60 PSI)
X=C (0 to 40 PSI)
X=D (0 to 15 PSI)
ZZ Connector
LA 9 Pin Sub D*
LB 15 Pin Sub D*
LC 25 Pin Sub D*
LD 10 Pin Ribbon Cable**
LE 16 Pin Ribbon Cable**
LF 20 Pin Ribbon Cable**
LG 26 Pin Ribbon Cable**
LH 3/8” NPSM Conduit Port
Standard Base Wires
Consult “Precautions” before use, installation or service of MAC Valves.
L=Left Side; R=Right Side
ZZ Connector
RA 9 Pin Sub D*
RB 15 Pin Sub D*
RC 25 Pin Sub D*
RD 10 Pin Ribbon Cable**
RE 16 Pin Ribbon Cable**
RF 20 Pin Ribbon Cable**
RG 26 Pin Ribbon Cable**
RH 3/8” NPSM Conduit Port
Standard Base Wires
* MIL. Spec; MIL-C-24308
** MIL. Spec; MIL-C-83503
Note: Left and right end is determined by facing conduit passage.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.09 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Pressure range regulator (0-100 PSI)
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Blanking plate regulator : N-44003.
• Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP threads.
DIMENSIONS
83.5
136.5
70.4
13.3
14.9
13.6
EXH EXH
IN
22.0
K
O C
L
K
O C
L
K
O C
L
K
O C
L
-
+
-
+
-
+
-
+
B
B
B
B
49.5
63.5
2.9
3.5
8.7
A
A
A
A
10.6
51.0
10.5
17.4
Consult “Precautions” before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 44
Function Port size Flow (Max) Circuit bar mounting
5/2, 3/2 NO-NC M5 - #10-32, 0.10C v
4 mm tube receptacle
OPERATIONAL BENEFITS
1. 10 mm valve, direct solenoid operated.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Flow is specifically adjusted on each valve.
7. Manual operator standard on all valves.
Reset
din rail,
plug-in with
pre-wired
connector
HOW TO ORDER
44B-xxx-GxxO-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
Single operator
B
A
Valve less base
EB
IN EA
44B-LOO-GXXO-XXX
SOLENOID OPERATOR ➤
G XX O- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (1.0 W)
DC 24VDC (1.8 W)
DD 24VDC (2.5 W)
1 Non-locking
DF 24VDC (4.0 W)
DV Plug-in with light and suppression diode
xx Other Options
xx Other Options
HOW TO ORDER CIRCUIT BAR
ECF44B-00xxx-xxxx
DJ
DT
DE
Plug-in
Plug-in with light
Plug-in with suppression diode
Port size
M5
# 10-32
4 mm tube receptacle
Side cylinder ports
(10.5 mm)
ECF44B-00BDB-ZZXX
ECF44B-00BBB-ZZXX
ECF44B-00BEB-ZZXX
Number of stations (03=3 stations)
Din rail spec. (EN50 022)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
ZZ Connector
LA 9 Pin Sub D*
LB 15 Pin Sub D*
LC 25 Pin Sub D*
LD 10 Pin Ribbon Cable**
LE 16 Pin Ribbon Cable**
LF 20 Pin Ribbon Cable**
LG 26 Pin Ribbon Cable**
LH 3/8” NPSM Conduit Port
Standard Base Wires
Consult “Precautions” before use, installation or service of MAC Valves.
L=Left Side; R=Right Side
ZZ Connector
RA 9 Pin Sub D*
RB 15 Pin Sub D*
RC 25 Pin Sub D*
RD 10 Pin Ribbon Cable**
RE 16 Pin Ribbon Cable**
RF 20 Pin Ribbon Cable**
RG 26 Pin Ribbon Cable**
RH 3/8” NPSM Conduit Port
Standard Base Wires
* MIL. Spec; MIL-C-24308
** MIL. Spec; MIL-C-83503
Note: Left and right end is determined by facing conduit passage.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 44
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 4 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
1.8 mm
4 W : 0.10 C v , 2.5 W : 0.08 C v , 1,8 W : 0.06 C v , 1.0 W : 0.05 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
4 W - 2.5 W - 1.8 W - 1.0 W
Energize : 4 ms
De-energize : 1.5 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Valve mounting kit : N-44001-03. • Blanking plate : M-44003. • Base wire Plug-in protector : 24180.
• Isolation of inlet and/or exhaust. • BSPP threads.
DIMENSIONS
83.5
8.7
3.5
2.9
76.2
70.4
13.3
14.9
13.6
EXH EXH
IN
54.4
49.5
63.5
60.5
9.8
42.6
10.5
2.8
13.2
5.4
B
B
B
B
A
A
A
A
Consult “Precautions” before use, installation or service of MAC Valves.

Section 2 Options
Consult “Precautions” before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Codification table for voltages / Manual operator / Electrical connection
VALVE CODE ➤
- G XX X - X XX
1 2 3 4
OPTIONS AVAILABLE FOR
- solenoid valves 34 & 44 Series
Consult “Precautions”before use, installation or service of MAC Valves.

OPTIONS
Back
1. VOLTAGE (type 34 Series)
-G XX X - X XX VOLTAGE
DC 24 VDC (1,8 W)
DD 24 VDC (2,5 W)
DE 24 VDC (3,0 W)
DF 24 VDC (4,0 W)
DJ 12 VDC (1,8 W)
DK 12 VDC (2,5 W)
DM 12 VDC (3,0 W)
DN 12 VDC (4,0 W)
1. VOLTAGE (type 44 Series)
-G XX X - X XX VOLTAGE
DA 24 VDC (1,0 W)
DC 24 VDC (1,8 W)
DD 24 VDC (2,5 W)
DF 24 VDC (4,0 W)
DG 12 VDC (1,0 W)
DJ 12 VDC (1,8 W)
DK 12 VDC (2,5 W)
DN 12 VDC (4,0 W)
2. WIRE LENGTH (Common options for 34 & 44 Series)
-G XX X - X XX WIRE LENGTH
A 18”
B 24”
C 36”
D 48”
E 72”
F 96”
G 120”
H 144”
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Back
3. MANUAL OPERATOR (COMMON OPTIONS FOR 34 & 44 SERIES)
-G XX X - X XX MANUAL OPERATOR
1 Non-locking recessed
3 Non-locking extended
4. ELECTRICAL CONNECTION (COMMON OPTIONS FOR 34 & 44 SERIES)
-G XX X - X XX NO CONNECTOR
BA Flying leads
BB BA with ground wire
BC BA with light
BD BA with light and ground wire
BE BA with suppression diode
BF BA with suppression diode and ground wire
BG BA with suppression diode and light
BH BA with suppression diode, light and ground wire
BN BA with suppression diode and blocking diode
BP BA with suppression diode, blocking diode and ground wire
BR BA with suppression diode, blocking diode and light
BS BA with suppression diode, blocking diode, light and ground wire
BT BA with light
BU BA with light and ground wire
BV BA with suppression diode and light
BW BA with suppression diode, light and ground wire
BX BA with suppression diode, blocking diode and light
BY BA with suppression diode, blocking diode, light and ground wire
-G XX X - X XX PLUG-IN CONNECTOR
KA Mini connector with flying leads
KB KA with ground wire
KE KA with suppression diode
KF KA with suppression diode and ground wire
KJ Mini connector for KA option
KM Mini connector for KB option
KN KA with suppression diode and blocking diode
KP KA with suppression diode, blocking diode and ground wire
KT KA with light
KU KA with light and ground wire
KV KA with suppression diode and light
KW KA with suppression diode, light and ground wire
KX KA with suppression diode, blocking diode and light
KY KA with suppression diode, blocking diode, light and ground wire
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
PIN #6
PIN #9
MOD. SD09
PIN #1
PIN #5
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 9
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 7 max.
• Max. 24 V=/5.4 W per solenoid
• 2 common wires
PIN #9
PIN #15
MOD. SD15
PIN #1
PIN #8
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 15
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 12 max.
• Max. 24 V=/5.4 W per solenoid
• 3 common wires
PIN #14
PIN #25
MOD. SD25
PIN #1
PIN #13
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 25
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 20 max.
• Max. 24 V=/5.4 W per solenoid
• 5 common wires
Note : Use desired MOD. number after circuit bar part number

O p t i o n s
OPTIONS
Connector termination details
CONNECTOR
SOL 1
SOL 2 SOL 3 SOL .. SOL 20 SOL 21 SOL 22 SOL 23 SOL 24
Single solenoid circuit bar
SOL 2 SOL 4 SOL 6 SOL 8 SOL 16 SOL 18 SOL 20 SOL 22 SOL 24
CONNECTOR
SOL 1 SOL 3 SOL 5 SOL 13 SOL 15 SOL 17 SOL 19 SOL 21 SOL 23
Double solenoid circuit bar
SD09 SD15 SD25
1
SOL. 1
1
SOL. 1
1
SOL. 1
2
SOL. 2
2
SOL. 2
2
SOL. 2
3
SOL. 3
3
SOL. 3
3
SOL. 3
4
SOL. 4
4
SOL. 4
4
SOL. 4
8
COMMON (+)
13
COMMON (+)
21
COMMON (+)
5
SOL. 5
5
SOL. 5
5
SOL. 5
6
SOL. 6
6
SOL. 6
6
SOL. 6
7
SOL. 7
7
SOL. 7
7
SOL. 7
9
COMMON (+)
8
SOL. 8
8
SOL. 8
14
COMMON (+)
22
COMMON (+)
9
SOL. 9
9
SOL. 9
10 SOL. 10
10 SOL. 10
11
SOL. 11
11
SOL. 11
12 SOL. 12
12 SOL. 12
15
COMMON (+)
23
COMMON (+)
13
SOL. 13
14 SOL. 14
15
SOL. 15
16 SOL. 16
24
COMMON (+)
17
18 SOL. 18
19
20 SOL. 20
SOL. 17
SOL. 19
25
COMMON (+)

Direct solenoid and solenoid pilot operated valves
Series 45
Circuit bar mounting
non plug-in
with or
without F. C.
non plug-in
with Pr. Reg.
non plug-in
with Pr. Reg.
and F. C.
plug-in
plug-in
with side
Pr. Reg.
plug-in
with sandwich
Pr. Reg.
plug-in
with F. C.
plug-in
with Pr. Reg.
and F. C.
plug-in
with integral
terminal strip
plug-in with
integral terminal
strip and
side Pr. Reg.
plug-in with
integral terminal
strip and
sandwich Pr. Reg.
plug-in with
integral terminal
strip with F. C.
plug-in with
integral terminal
strip with
Pr. Reg. and F. C.
Manual operator
Armature
Spool push pin
Solenoid
A
EXH.
Spring biased moveable
pole piece
Valve spring
IN
Bonded balanced poppets
B
SERIES FEATURES
• Patented MACSOLENOID ® for fastest possible response times.
• Extremely high cycle rate capability.
• Rated for lubricated or non-lubricated service.
• Various solenoid enclosures and plug-in connectors.
• Low wattage DC solenoids - down to 1.8 watts.
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v
non plug-in
with or
without F. C.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Single operator
A B
A
B
Double operator
(Minimum DC wattage 5,4W)
A
A B
B
EXH
IN
45A-L00-DXXX-XXX
EXH
IN
45A-N00-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
A
J
18” (Flying leads)
Connector
HOW TO ORDER CIRCUIT BAR ** (WITHOUT FLOW CONTROLS)
x
Other Options
1 Non-locking Recessed
KA Square connector
2 Locking Recessed
KD Square connector
with light
x Other Options
BA Flying leads
xx Other Options
EBM45A-xxxx-xx
Port size
Spacing
mm
Side cylinder
ports
Bottom cylinder
ports
1/8” NPTF
21
EBM45A-001A-XX
EBM45A-002A-XX
# 10-32 UNF
21
EBM45A-001B-XX
EBM45A-002B-XX
HOW TO ORDER CIRCUIT BAR ** (WITH FLOW CONTROLS)
Port size
Spacing
mm
Side cylinder
ports
Bottom cylinder
ports
1/8” NPTF
26
EBM45A-015A-XX
EBM45A-016A-XX
# 10-32 UNF
26
EBM45A-015B-XX
EBM45A-016B-XX
1/8” NPTF
40
EBM45A-025A-XX
EBM45A-026A-XX
# 10-32 UNF
40
EBM45A-025B-XX
EBM45A-026B-XX
Number of stations (03=3 stations)
** Other options available Consult factory.
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
VALVE BLANKING PLATE
21,0
"A"
21,0
94,1
25,6
VALVE BLANKING
PLATE
21,0
"A"
21,0
33,0
21,5
~24.5
29,5
B
C L
C L
C L
B B
A A A
7,5
17,0
5,0
11,0
50,5
22,0
IN
EXH
5,1 LOCKING
RECESSED OPERA-
TOR
35,5
B
C L
C L
C L
B B
A A A
5,5
11,0
C
B
65,6
OPTIONAL PRESSURE
SENSING PORT
(#10-32 UNF)
50,5
22,0
18,6
IN
17,0
32,0
40,0
EXH
11,5
~24.5
5,1 LOCKING
RECESSED
OPERATOR
1/8” 2 PORTS
BOTH ENDS
Ø 5,2 MTG.
HOLES
21,0
8,0
7,0
5,0
23,6
B B B
A A A
OPTIONAL
BOTTOM PORTS
C L
C L
C L
5,5
5,5
3,18
13,6
7,14
25,4
FLOW CONTROL
DIMENSIONS
SPACING SIZE
A
STANDARD
21.0
PORT SIZE
B
C
PER JB
26.0
1/8”
20.0
8.0
GAGES
40.0
M5
22.0
6.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v
non plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Single operator
A B
A
B
Double operator
(Minimum DC wattage 5,4W)
A
A B
B
Valve w/o gage port
Valve w/ gage port
EXH IN
45A-L00-DXXX-XXX
45A-M00-DXXX-XXX
EXH IN
45A-N00-DXXX-XXX
45A-P00-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
AA 120/60, 110/50
A 18” (Flying leads)
1 Non-locking Recessed
KA Square connector
AB 240/60, 220/50
J Connector
2 Locking Recessed
KD Square connector
with light
AC 24/60, 24/50
x Other Options
x Other Options
BA Flying leads
FB 24VDC (1.8 W)
xx Other Options
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR WITH PRESSURE REGULATORS (ORDER REGULATORS SEPARATELY) **
EBM45A-xxxx-xx
Port size
Spacing
mm
Side cylinder
ports
Bottom cylinder
ports
1/8” NPTF
21 (w/o gage)
EBM45A-003A-XX
EBM45A-004A-XX
# 10-32 UNF
21 (w/o gage)
EBM45A-003B-XX
EBM45A-004B-XX
1/8” NPTF
40 (w/ gage)
EBM45A-023A-XX
EBM45A-024A-XX
# 10-32 UNF
40 (w/ gage)
EBM45A-023B-XX
EBM45A-024B-XX
Number of stations (03=3 stations)
** Other options available Consult factory.
Note : clic for valves and regulators mounted to circuit bar at the factory (add - 9 to the model number).
gage not supplied w/circuit bar.
Pressure regulators :
35A-00M (Adjusting knob)
35A-00L (Slotted stem)
35A-00U (Locking stem)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
VALVE BLANKING PLATE
64,5
21,0
"A"
21,0
17,5
33,0
5,1 LOCKING RECESSED
OPERATOR
C L
C L
C L
35,5
B
B
A A A
5,5
B
C
B
56,5
28,0
14,0
IN
EXH
10,25
Ø 5,2.
2 MTG HOLES
11,0
5,0
8,0
35,5
22,0
5,0
1/8” 2 PORTS
BOTH ENDS
14,5
29,5
40,0
91,1
16,0
13,4
SPACING SIZE
STANDARD
PER JB
GAGES
A
21.0
26.0
40.0
11,0
5,5
B
B
A
A
A
C L
C L
21,0
REGULATOR BLANKING
PLATE
15,5
ADJ. LOCKING KNOB
Port size
B
C
B
C L
1/8”
M5
20.0
22.0
8.0
6.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v
non plug-in
with Pr. Reg.
and F. C.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Single operator
A B
A
B
Double operator
(Minimum DC wattage 5,4W)
A
A B
B
Valve w/o gage port
Valve w/ gage port
EXH IN
45A-L00-DXXX-XXX
45A-M00-DXXX-XXX
EXH IN
45A-N00-DXXX-XXX
45A-P00-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
AA 120/60, 110/50
A 18” (Flying leads)
1 Non-locking Recessed
KA Square connector
AB 240/60, 220/50
J Connector
2 Locking Recessed
KD Square connector
with light
AC 24/60, 24/50
x Other Options
x Other Options
BA Flying leads
FB 24VDC (1.8 W)
xx Other Options
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
EBM45A-xxxx-xx
HOW TO ORDER CIRCUIT BAR WITH PRESSURE REGULATORS AND FLOW CONTROLS (ORDER REGULATOR AND FLOW CONTROL SEPARATELY) **
Port size
Spacing
mm
Side cylinder
ports
Bottom cylinder
ports
1/8” NPTF
21 (w/o gage)
EBM45A-007A-XX
EBM45A-008A-XX
# 10-32 UNF
21 (w/o gage)
EBM45A-007B-XX
EBM45A-008B-XX
1/8” NPTF
40 (w/ gage)
EBM45A-027A-XX
EBM45A-028A-XX
# 10-32 UNF
40 (w/ gage)
EBM45A-027B-XX
EBM45A-028B-XX
Number of stations (03=3 stations)
** Other options available Consult factory.
Note : clic for valves, regulators and flow controls mounted to circuit bar at the factory (add - 9 to the model number).
gage not supplied w/circuit bar
Pressure regulators and flow controls:
45A-001 (Slotted stem)
45A-002 (Adjusting knob)
45A-003 (Locking stem)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
21.0
CL
A
CL
CL
CL
66.5
38.0
A
+
+
B
+
+
B A
LC
CL
LC
LC
LC
CL
LC
LC
B
95.6
APPROX.
A
A
A
A
EX
45.0
B
B
B
B
IN
19.5
34.5
A A
B B
5.0 27.0
8.0
LC
CL
LC
LC
15.3
19.0
5.0
A
5.0
15.5
A 26.5
28.5
8.0
B
A
15.5
A
A
B
1/8" - 27 N.P.T.F.
1/8" - 28 B.S.P.PL.
1/8" - 28 B.S.P.TR.
#10-32 UNF
M5 X 0.8
Dim.
SLOTTED
LOCKING STEM
ADJUSTING KNOB
B
6.0
13.4
Dim.
STANDARD
SPACING
SPACING
FOR GAUGES
A
21.0
40.0
26.5
A
Note: Bottom & side cylinder ports not available on the same station
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v plug-in
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING “PLUG-IN”
Single operator
A B
A
B
Double operator
(Minimum DC wattage 5,4W)
A
A B
B
EXH
IN
45A-L00-DXXJ-XFM
EXH
IN
45A-N00-DXXJ-XFM
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER “PLUG-IN” CIRCUIT BAR**
1 Non-locking Recessed
2 Locking Recessed
x Other Options
ECD45A-xxxx-xx-xx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
21
ECD45A-001A-A0-XX
ECD45A-002A-A0-XX
# 10-32 UNF
21
ECD45A-001B-A0-XX
ECD45A-002B-A0-XX
1/8” NPTF
30
ECD45A-031A-C0-XX
ECD45A-032A-C0-XX
# 10-32 UNF
30
ECD45A-031B-C0-XX
ECD45A-032B-C0-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
for multi-pin connector (9, 15 or 25).
O P T I O N S
ECD45A-002A-A0-XX
- clic for double operator valve (replace by 8) (Bottom cylinder ports).
** A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal w/light (120V)
CB = terminal w/light (240V)
CD = terminal w/light (24V)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
BLANKING STATION KIT
OPTIONAL PRESSURE
SENSING PORT
21,0
30,0 30,0 21,0
21,0
26,8
73,8
5,1 LOCKING RECESSED
OPERATOR
C L
C L
C L
C L
47,5
B
A
B
A
B
A
B
A
28,5
68,5
19,8
EX
IN
17,0
40,0
20,0
11,0
37,7
34,5
18,3
6,0
10,0
4,5
Ø 5,2 MOUNTING HOLES
1,45
1/8”
INLET & EXHAUST
PORTS EACH END
13,5
29,0
57,3
78,0
84,8
1” NPSM
CONDUIT
EACH END
5,5
5,5
1,8
4,5
8,0
7,8
68,5
40,0
105,58
17,0 19,0
4,5
29,0
57,3
13,5
37,0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v
plug-in
with side
Pr. Reg.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR "PLUG-IN" CIRCUIT BAR
Single operator
A
A
B
B
EXH IN
45A-L00-DXXJ-XFM
45A-M00-DXXJ-XFM
Valve w/o gage port
Valve w/ gage port
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
1 Non-locking Recessed
2 Locking Recessed
x Other Options
HOW TO ORDER CIRCUIT BAR WITH PRESSURE REGULATORS (TO BE ORDERED SEPARATELY) **
ECD45A-xxxx-xx-xx
Port size
1/8” NPTF
# 10-32 UNF
1/8” NPTF
# 10-32 UNF
1/8” NPTF
# 10-32 UNF
Spacing
mm
21
21
30
30
40
40
Bottom cylinder ports
ECD45A-004A-A0-XX
ECD45A-004B-A0-XX
ECD45A-034A-C0-XX
ECD45A-034B-C0-XX
ECD45A-024A-A0-XX
ECD45A-024B-A0-XX
Number of stations (03=3 stations)
Note : clic for valves and regulators mounted to circuit bar at the factory (add - 9 to
the model number).
for multi-pin connector (9, 15 or 25).
minimum spacing for terminal strips is 30 mm.
use 40 mm spacing for gages.
** Pressure Regulators :
35A-00M (Adjusting knob)
35A-00L (Slotted stem)
35A-00U (Locking stem)
Consult “Precautions”before use, installation or service of MAC Valves.
** A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal w/light (120V)
CB = terminal w/light (240V)
CD = terminal w/light (24V)

B
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
BLANKING STATION KIT
21,0
30,0 30,0 21,0
21,0
26,8
OPTIONAL PRESSURE
SENSING PORT
73,8
0,2 LOCKING RECESSED
OPERATOR
C L
C L
C L
C L
47,5
B
A
B
A
B
A
28,5
68,5
19,8
EX
IN
17,0
40,0
20,0
11,0
6,0
10,0
4,5
Ø 5,2 MOUNTING HOLES
1,45
1/8” INLET &
EXHAUST PORTS
EACH END
13,5
29,0
57,3
78,0
84,8
1” NPSM
CONDUIT
EACH END
15,5
4,5
A
5,5
5,5
LOCK
ADJ. LOCKING KNOB
60,5 20,7
34,5
37,0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v
plug-in
with sandwich
Pr. Reg.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING “PLUG-IN”
Single operator
A
A
B
B
EXH IN
45A-L00-DXXJ-XFM
45A-M00-DXXJ-XFM
Valve w/o gage port
Valve w/ gage port
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
1 Non-locking Recessed
2 Locking Recessed
x Other Options
ECD45A-xxxx-xx-xx
HOW TO ORDER "PLUG-IN" CIRCUIT BAR WITH SANDWICH PRESSURE REGULATORS (TO BE ORDERED SEPARATELY) **
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
21
ECD45A-001A-A0-XX
ECD45A-002A-A0-XX
# 10-32 UNF
21
ECD45A-001B-A0-XX
ECD45A-002B-A0-XX
1/8” NPTF
30
ECD45A-031A-C0-XX
ECD45A-032A-C0-XX
# 10-32 UNF
30
ECD45A-031B-C0-XX
ECD45A-032B-C0-XX
1/8” NPTF
40
ECD45A-021A-A0-XX
ECD45A-022A-A0-XX
# 10-32 UNF
40
ECD45A-021B-A0-XX
ECD45A-022B-A0-XX
Number of stations (03=3 stations)
Note : clic for valves and regulators mounted to circuit bar at the factory, add - 9 to
the model number.
for multi-pin connector (9, 15 or 25).
minimum spacing for terminal strips is 30 mm.
use 40 mm spacing for gages.
** Pressure Regulators :
PR45A-AA0A (Adjusting knob)
PR45A-AB0A (Slotted stem)
PR45A-AC0A (Locking stem)
Consult “Precautions”before use, installation or service of MAC Valves.
** A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal w/light (120V)
CB = terminal w/light (240V)
CD = terminal w/light (24V)

L
OCK
L OCK
L OCK
L OCK
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
26.0
15.0
A
A
Dim.
A
Dim.
B
28.5
40.0
10.0
B A B A B A B A
1/8" - 27 N.P.T.F.
1/8" - 28 B.S.P.PL.
1/8" - 28 B.S.P.TR.
#10-32
M5 0.8
STANDARD
SPACING
OPTIONAL
SPACING
SPACING
FOR GAUGES
21.0
30.0
40.0
SLOTTED
LOCKING STEM
ADJUSTING KNOB
Note: Bottom & side cylinder ports not available on the same station
6.0
13.4
21.0
A
94.0
APPROX.
B
B
B
B
B
EX
123.1
APPROX.
37.7
26.5
15.5
4.5
TYP.
20.8
B
A
B
78.0
A
A
A
A
IN
49.0
64.5
34.5 A
A
20.7
96.0
17.0
19.8
20.0
A
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v
plug-in
with F. C.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING “PLUG-IN”
Port size
(see base)
Single operator
A
A
B
B
Valve less base
EXH
IN
45A-L00-DXXJ-XFM
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER "PLUG-IN" CIRCUIT BAR WITH FLOW CONTROLS **
1 Non-locking Recessed
2 Locking Recessed
x Other Options
ECD45A-xxxx-xx-xx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
21
--------
ECD45A-006A-A0-XX
# 10-32 UNF
21
--------
ECD45A-006B-A0-XX
1/8” NPTF
30
ECD45A-035A-A0-XX
--------
# 10-32 UNF
30
ECD45A-035B-A0-XX
--------
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
for multi-pin connector (9, 15 or 25).
minimum spacing for terminal strips is 30 mm.
** A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal w/light (120V)
CB = terminal w/light (240V)
CD = terminal w/light (24V)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
L
68.6
40.0
19.8
17.0
13.2
Max.
78.0
84.3
89.2 ( Optional )
29.0
13.5
EX IN
1/8 (IN + EX)
43.0
40.0
14.5
13.0
8.0
A
B A B A B A B
10.3
DIA. 5.2 (2X)
37.0
37.0
26.0
21.0
51.0
4.5
Number of
stations
2
3
4
5
6
4.5
7
8
9
10
DIM. L
77.0
107.0
137.0
167.0
197.0
227.0
257.0
287.0
317.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v
plug-in
with Pr. Reg.
and F. C.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING “PLUG-IN”
Port size
(see base)
Single operator
A
A
B
B
Valve less base (w/o gage port)
Valve less base (w/ gage port)
EXH IN
45A-L00-DXXJ-XFM
45A-M00-DXXJ-XFM
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
1 Non-locking Recessed
2 Locking Recessed
x Other Options
ECD45A-xxxx-xx-xx
HOW TO ORDER "PLUG-IN" CIRCUIT BAR WITH REGULATORS AND FLOW CONTROLS (TO BE ORDERED SEPARATELY) **
Port size
1/8” NPTF
# 10-32 UNF
1/8” NPTF
# 10-32 UNF
Spacing
mm
21
21
30
30
Bottom cylinder ports
ECD45A-007A-A0-XX
ECD45A-007B-A0-XX
ECD45A-037A-C0-XX
ECD45A-037B-C0-XX
Number of stations (03=3 stations)
Note : clic for valves and regulators mounted to circuit bar at the factory
(add - 9 to the model number).
for multi-pin connector (9, 15 or 25).
minimum spacing for terminal strips is 30 mm.
Pressure regulators and flow controls:
45A-001 (Slotted stem)
45A-002 (Adjusting knob)
45A-003 (Locking stem)
** A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
** C0 = terminal strip
CA = terminal w/light (120V)
CB = terminal w/light (240V)
CD = terminal w/light (24V)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
L
68.6
40.0
19.8
17.0
10.0
21.0
78.0
84.3
89.2 ( Optional )
29.0
13.5
IN
EX
1/8 (IN + EX)
7.0
37.0
A
A
A
A
B B B B
DIA. 5.2 (2
20.7
34.5
37.0
148.2
4.5
4.5
20.5
17.3
26.0
21.0
42.0
Number of
stations
DIM. L
2
68.0
3
89.0
4
110.0
5
131.0
6
152.0
7
173.0
8
194.0
9
215.0
10
236.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting s
4/2 1/8” NPTF - #10-32 UNF 0.10C v
plug-in
with integral
terminal strip
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-LOO-DxxJ-xFM
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING “PLUG-IN”
Single operator
A
A
B
B
EXH
IN
45A-L00-DXXJ-XFM
Valve less base
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
1 Non-locking Recessed
2 Locking Recessed
x Other Options
HOW TO ORDER “PLUG-IN” CIRCUIT BAR**
ECE45A-011A-CD-02
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
26
ECE45A-011A-C0-XX
ECE45A-012A-C0-XX
# 10-32 UNF
26
ECE45A-011B-C0-XX
ECE45A-012B-C0-XX
Number of stations (03=3 stations)
End plate kit required : M-45017
Note : clic for valves mounted on circuit bar at the factory (add - 9 to the
model number).
2
** C0 = terminal strip
CA = terminal strip w/light (120V)
CB = terminal strip w/light (240V)
CD = terminal strip w/light (24V)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
49.5
38.5
A
A
10.0
28.5
40.0
LC
C L C L C L
1/4" - 18 N.P.T.F.
TYP. (2) EACH END
68.4
C L
C L
C L
C L
IN
EX
B
B
B
B
EX
IN
89.4
100.4
A
A
A
A
G
33.9
71.4
79.7
65.9
58.4
16.0
44.5
26.0
1" - 11 1/2 N.P.S.M
19.9
28.9
10.9
158.0
A 39.0
A 50.0
4.5
TYP.
Note: Bottom & side cylinder ports not available on the same station
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v
integral terminal
strip and
plug-in with
side Pr. Reg.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR “PLUG-IN” CIRCUIT BAR
Single operator
A
A
B
B
EXH IN
45A-L00-DXXJ-XFM
45A-M00-DXXJ-XFM
Valve less base w/o gage port
Valve less base w/ gage port
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
1 Non-locking Recessed
2 Locking Recessed
x Other Options
HOW TO ORDER CIRCUIT BAR WITH PRESSURE REGULATORS (TO BE ORDERED SEPARATELY) **
ECE45A-xxxx-xx-xx
Port size
1/8” NPTF
# 10-32 UNF
1/8” NPTF
# 10-32 UNF
Spacing
mm
26
26
40
40
Bottom cylinder ports
ECE45A-014A-C0-XX
ECE45A-014B-C0-XX
ECE45A-024A-C0-XX
ECE45A-024B-C0-XX
Number of stations (03=3 stations)
End plate kit required : M-45017
Note : clic for valves and regulators mounted to circuit
bar at the factory (add - 9 to the model number).
Use 40 mm spacing for valves w/ gage port.
** Pressure Regulators :
35A-00M (Adjusting knob)
35A-00L (Slotted stem)
35A-00U (Locking stem)
** C0 = terminal strip
CA = terminal strip w/light (120V)
CB = terminal strip w/light (240V)
CD = terminal strip w/light (24V)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
40.0
LC
LC
LC
68.4
1/4" - 18 N.P.T.F.
TYP. (2) EACH END
B
154.5
89.4
100.4
71.4
33.9
58.4
16.0
44.5
A
C L C L C L C L C L C L C L C L
4.5
B
B
B
B
EX
IN
EX
A
A
A
A
IN
C L
79.7
65.9
G
1" - 11 1/2 N.P.S.M
19.9
28.9
10.9
158.0
A
A
39.0
50.0
Dim.
B
Dim.
A
SLOTTED
LOCKING STEM
ADJUSTING KNOB
6.0
13.4
STANDARD
SPACING
SPACING
FOR GAUGES
26.0
40.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v
integral terminal
strip and
plug-in with
sandwich Pr. Reg.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING “PLUG-IN”
Single operator
A
A
B
B
EXH IN
45A-L00-DXXJ-XFM
45A-M00-DXXJ-XFM
Valve w/o gage port
Valve w/ gage port
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
1 Non-locking Recessed
2 Locking Recessed
x Other Options
HOW TO ORDER “PLUG-IN” CIRCUIT BAR WITH SANDWICH REGULATORS (TO BE ORDERED SEPARATELY) **
ECE45A-xxxx-xx-xx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
26
ECE45A-011A-C0-XX
ECE45A-012A-C0-XX
# 10-32 UNF
26
ECE45A-011B-C0-XX
ECE45A-012B-C0-XX
1/8” NPTF
40
ECE45A-021A-C0-XX
ECE45A-022A-C0-XX
# 10-32 UNF
40
ECE45A-021B-C0-XX
ECE45A-022B-C0-XX
Number of stations (03=3 stations)
End plate kit required : M-45017
Note : clic for valves and regulators mounted to circuit
bar at the factory (add - 9 to the model number).
Use 40 mm spacing for valves w/ gage port.
** Pressure Regulators :
PR45A-AA0A (Adjusting knob)
PR45A-AB0A (Slotted stem)
PR45A-AC0A (Locking stem)
** C0 = terminal strip
CA = terminal strip w/light (120V)
CB = terminal strip w/light (240V)
CD = terminal strip w/light (24V)
Consult “Precautions”before use, installation or service of MAC Valves.

L OCK
LOCK
LOCK
L
OCK
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
10.0
49.5
38.5
A
A
Dim.
A
Dim.
B
28.5
40.0
1/8" - 27 N.P.T.F.
1/8" - 28 B.S.P.PL.
1/8" - 28 B.S.P.TR.
#10-32
M5 X 0.8
STANDARD
SPACING
SPACING FOR
GAUGES
26.0
40.0
SLOTTED
LOCKING STEM
ADJUSTING KNOB
Note: Bottom & side cylinder ports not available on the same station
6.0
13.4
LC
LC
LC
LC
93.8
1/4" - 18 N.P.T.F.
TYP. (2) EACH END
LC
LC
LC
LC
B
144.5
APPROX.
IN
EX
B
B
B
B
EX
IN
89.4
A
A
A
A
G
33.9
71.4
79.7
65.9
58.4
16.0
44.5
A
1" - 11 1/2 N.P.S.M
19.9
28.9
10.9
A
A
39.0
50.0
4.5
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v
plug-in with
integral terminal
strip with F. C.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING “PLUG-IN”
Single operator
A
A
B
B
EXH
IN
45A-L00-DXXJ-XFM
Valve less base
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER “PLUG-IN” CIRCUIT BAR WITH FLOW CONTROLS **
1 Non-locking Recessed
2 Locking Recessed
x Other Options
ECE45A-xxxx-xx-xx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
26
--------
ECE45A-016A-C0-XX
# 10-32 UNF
26
--------
ECE45A-016B-C0-XX
1/8” NPTF
30
ECE45A-035A-C0-XX
--------
# 10-32 UNF
30
ECE45A-035B-C0-XX
--------
Number of stations (03=3 stations)
End plate kit required : M-45017
Note : clic for valves and regulators mounted to circuit
bar at the factory (add - 9 to the model number).
** C0 = terminal strip
CA = terminal strip w/light (120V)
CB = terminal strip w/light (240V)
CD = terminal strip w/light (24V)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
27.5
13.0
8.0 10.3
40.0
B A
B A
B A
B A
+
LC
+
+
+ + + + +
C L C L C L
1/8" - 27 N.P.T.F.
1/8" - 28 B.S.P.PL.
1/8" - 28 B.S.P.TR.
#10-32
M5 X 0.8
1/4" - 18 N.P.T.F.
TYP. (2) EACH END
68.4
B
B
B
B
IN
EX
EX
111.9
IN
89.4
A
A
A
A
71.4
65.9
79.7
G
33.9
58.4
16.0
44.5
A
1" - 11 1/2 N.P.S.M 10.9
158.0
19.9
28.9
A
A
39.0
50.0
4.5
Dim.
STANDARD
SPACING
OPTIONAL
SPACING
A
26.0
30.0
Consult “Precautions”before use, installation or service of MAC Valves.
Note: Bottom & side cylinder ports not available on the same station

Direct solenoid and solenoid pilot operated valves
Series 45
Function Port size Flow (Max) Circuit bar mounting
4/2 1/8” NPTF - #10-32 UNF 0.10C v
integral terminal
strip with
plug-in with
Pr. Reg. and F. C.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Burn-out proof solenoid on AC service.
Reset
HOW TO ORDER
45A-xxx-DxxJ-xFM
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING “PLUG-IN”
Single operator
A
A
B
B
EXH IN
45A-L00-DXXJ-XFM
45A-M00-DXXJ-XFM
Valve less base
Valve less base w/ gage port
SOLENOID OPERATOR ➤
D XX J- X FM *
XX
Voltage
X
Manual operator
AA 120/60, 110/50
AB 240/60, 220/50
AC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
1 Non-locking Recessed
2 Locking Recessed
x Other Options
HOW TO ORDER “PLUG-IN” CIRCUIT BAR WITH PRESSURE AND FLOW CONTROLS (TO BE ORDERED SEPARATELY) **
ECE45A-xxxx-xx-xx
Port size
1/8” NPTF
# 10-32 UNF
1/8” NPTF
# 10-32 UNF
Spacing
mm
26
26
40
40
Bottom cylinder ports
ECE45A-017A-C0-XX
ECE45A-017B-C0-XX
ECE45A-027A-C0-XX
ECE45A-027B-C0-XX
Number of stations (03=3 stations)
End plate kit required : M-45017
Note : clic for valves and regulators mounted to circuit
bar at the factory (add - 9 to the model number).
Use 40 mm spacing for valves w/ gage port.
** Pressure Regulators :
45A-001 (Slotted stem)
45A-002 (Adjusting knob)
45A-003 (Locking stem)
** C0 = terminal strip
CA = terminal strip w/light (120V)
CB = terminal strip w/light (240V)
CD = terminal strip w/light (24V)
Consult “Precautions”before use, installation or service of MAC Valves.

L O
CK
L
OCK
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 45
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
2 mm
1.8 W : 0.08 C v , 5.4 W : 0.1 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
Nema 4
120 VAC/60 = Inrush : 10.9 VA (0.09 AMPS) Holding : 7. 7VA (0.06 AMPS)
DC VOLTS = 1.8 W to 12.7 W
24 VDC (5.4W) Energize : 6 ms De-energize : 2 ms
120 VAC Energize : 3-8 ms De-energize : 2-7 ms
Spare parts :
Options :
• Solenoid operator (power 5.4 W) : DXXJ-XFM, including mounting screws 35013.
• Seal between solenoid and valve body : 16402. • Seal between base and valve : 16453.
• Valve mounting screw (x2) : 35020. • Blanking plate valve : M-45010. • Blanking plate regulator : M-35005.
• BSPP threads. • High flow up to 0.14C v , according to wattage. • Isolation of inlet and/or exhaust.
DIMENSIONS
EX
B
B
B
B
B
A
B A
B A
B A
L O
CK
L O
CK
Dim.
B
Dim.
A
40.0
SLOTTED
LOCKING STEM
ADJUSTING KNOB
6.0
13.4
STANDARD
SPACING
SPACING
FOR GAUGES
26.0
40.0
+
+
+
+
+
+
+
+
LC
C L C L C L
LC
LC
LC
LC
1/4" - 18 N.P.T.F.
TYP. (2) EACH END
68.4
B
LC
LC
LC
LC
154.5
IN
EX
IN
89.4
A
A
A
A
71.4
65.9
79.7
G
33.9
58.4
16.0
44.5
A
1" - 11 1/2 N.P.S.M
19.9
28.9
10.9
158.0
A
A
39.0
50.0
4.5
TYP.
Consult “Precautions”before use, installation or service of MAC Valves.

Section 2 Options
Consult “Precautions” before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Codification table for voltages / Wire length / Manual operators / Electrical connections
VALVE CODE ➤
- D XX X - X XX
1 2 3 4
OPTIONS AVAILABLE FOR
- Solenoid valves 35 & 45 Series
Consult “Precautions”before use, installation or service of MAC Valves.

OPTIONS
Back
1. VOLTAGE
- D XX X - X XX VOLTAGE
AD 24/60
AE 200/60
AF 240/50
AG 100/50, 100/60, 110/60
DB 12 VDC (5.4 W)
DC 12 VDC (7.5 W)
DD 24 VDC (7.3 W)
DE
12 VDC (12.7 W) CLSF
DK 110 VDC (5.8 W)
DL 64 VDC (6.0 W)
DM 36 VDC (5.8 W)
DN 6 VDC (6.0 W)
DP 48 VDC (5.8 W)
DU 24 VDC (6.0 W)
EA 12 VDC (6.0 W)
FA 12 VDC (1.8 W)
FE 12 VDC (2.4 W)
FF 24 VDC (2.4 W)
2. WIRE LENGTH
- D XX X - X XX WIRE LENGTH
B 24”
C 36”
D 48”
E 72”
F 96”
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Back
3. MANUAL OPERATOR
- D XX X - X XX MANUAL OPERATOR
0 No operator
1 Non-locking recessed
2 Locking recessed
3 Non-locking extended
4 Locking extended
4. ELECTRICAL CONNECTION
- D XX X - X XX ELECTRICAL CONNECTION
BA Flying leads
BK BA with protection diode
BL BA with protection varistor
CA 1/2" NPS conduit
*FN Plug-in with diode
*FP Plug-in with M.O.V.
JB Rectangular connector
JD Rectangular connector with light
JM Rectangular connector, male only
KA Square connector
KB Square connector with protection diode
KC Square connector with protection varistor
KD Square connector with light
KE Square connector with light and protection diode
KF Square connector with light and protection varistor
KJ Square connector (male only)
KK Square connector with protection diode (male only)
KL Square connector with protection varistor (male only)
TA Dual tabs
TB TA with protection diode
TD TA with light
TE TA with light and protection diode
TJ Dual tabs (male only)
TK TJ with protection diode
TM TJ with light
TN TJ with light and protection diode
* For use with the ECD and ECE style circuit bars.
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
PIN #6
PIN #9
MOD. SD09
PIN #1
PIN #5
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 9
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 7 max.
• Max. 24 V=/5.4 W per solenoid
• 2 common wires
PIN #9
PIN #15
MOD. SD15
PIN #1
PIN #8
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 15
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 12 max.
• Max. 24 V=/5.4 W per solenoid
• 3 common wires
PIN #14
PIN #25
MOD. SD25
PIN #1
PIN #13
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 25
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 20 max.
• Max. 24 V=/5.4 W per solenoid
• 5 common wires
Note : Use desired MOD. number after circuit bar part number

O p t i o n s
OPTIONS
Connector termination details
CONNECTOR
SOL 1
SOL 2 SOL 3 SOL .. SOL 20 SOL 21 SOL 22 SOL 23 SOL 24
Single solenoid circuit bar
SOL 2 SOL 4 SOL 6 SOL 8 SOL 16 SOL 18 SOL 20 SOL 22 SOL 24
CONNECTOR
SOL 1 SOL 3 SOL 5 SOL 13 SOL 15 SOL 17 SOL 19 SOL 21 SOL 23
Double solenoid circuit bar
SD09 SD15 SD25
1
SOL. 1
1
SOL. 1
1
SOL. 1
2
SOL. 2
2
SOL. 2
2
SOL. 2
3
SOL. 3
3
SOL. 3
3
SOL. 3
4
SOL. 4
4
SOL. 4
4
SOL. 4
8
COMMON (+)
13
COMMON (+)
21
COMMON (+)
5
SOL. 5
5
SOL. 5
5
SOL. 5
6
SOL. 6
6
SOL. 6
6
SOL. 6
7
SOL. 7
7
SOL. 7
7
SOL. 7
9
COMMON (+)
8
SOL. 8
8
SOL. 8
14
COMMON (+)
22
COMMON (+)
9
SOL. 9
9
SOL. 9
10 SOL. 10
10 SOL. 10
11
SOL. 11
11
SOL. 11
12 SOL. 12
12 SOL. 12
15
COMMON (+)
23
COMMON (+)
13
SOL. 13
14 SOL. 14
15
SOL. 15
16 SOL. 16
24
COMMON (+)
17
18 SOL. 18
19
20 SOL. 20
SOL. 17
SOL. 19
25
COMMON (+)

Direct solenoid and solenoid pilot operated valves
Series 47
Circuit bar mounting
non plug-in
cyl. ports in
valve with
opt. F. C.
non plug-in
cyl. ports in
base with
opt. F. C.
add-on style
non plug-in cyl.
ports in valve
with opt. F. C.
add-on style
non plug-in cyl.
ports in base
with opt. F. C.
non plug-in
cyl. ports in
valve with
opt. Pr. Reg.
non plug-in
cyl. ports
in base
non plug-in
cyl. ports in
base with
Pr. Reg.
add-on style
non plug-in
cyl. ports in
base
add-on style
non plug-in cyl.
ports in base
with Pr. Reg.
plug-in
plug-in
with Pr. Reg.
add-on style
plug-in
add-on style
plug-in
with Pr. Reg.
plug-in
add-a-unit
stations
plug-in
add-a-unit
stations
with Pr. Reg.
Manual operator
Armature
Coil
Push pin
Pole piece
“D” seal
Conical seat
Poppet
4
2
5
1
Valve return spring
3
SERIES FEATURES
• Short stroke solenoid produces high energization shifting force.
• High force return spring due to high force solenoid maximizes
both energization and de-energization shifting forces.
• Built-in wear compensation - valve stroke is shorter than solenoid stroke.
• Four (4) bonded balanced poppets on a one-piece valve stem.
• End poppets seal first on conical seats and cushion inlet poppet, eliminating cutting.
• Exhaust seals are not under inlet pressure thus reducing friction.
• Short stroking balanced poppet allows for direct solenoid operation with high shifting forces,
minimized friction, fast response and high flow in a small package.
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size (Inlet & Exhaust) Flow (Max) Circuit bar mounting Profile
non plug-in
5/2 3/8” 0.5C v
cyl. ports in
valve with
29 mm
opt. F. C.
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
Reset
HOW TO ORDER
47A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Valve port size
Valve less base
2
4
12
14
1/8” NPTF
1/4” NPTF
3 1 5
47A-MG0-HXXX-XXX
47A-MH0-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
A 18”
1 Non-locking
BA
Flying leads
DB 24VDC (2.4 W)
C 36”
BC
Flying leads with light
DC 24VDC (1.8 W)
x
Other Options
MA
MC
Plug-in wire assy
Plug-in wire assy
DD 24VDC (1.0 W)
with light
AA
120VAC (must use with
HA
Plug-in connector with
rectified connector)
rectifier and light
xx
Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR
Port size
COMMON INLET & EXHAUST
3/8” NPTF
Without flow controls
(20 mm)
EBM47A-01CAK-XX
EBM47A-xxxxx-xx
With flow controls
(20 mm)
EBM47A-01DAK-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
Consult “Precautions”before use, installation or service of MAC Valves.

4
4
4
4
2
2
2
2
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47002.
• Flow control kit (x2) : N-37001.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
78.1
25.0 20.0
7.0
96.0
TYP.
14.5
132.4
31.1
50.6
3 1 5
12
12
12
12
3
1
5
82.0
26.5
26.5
27.8
26.5
14
14
14
14
29.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting Profile
5/2 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
non plug-in
cyl. ports in
base with
opt. F. C.
29 mm
Reset
HOW TO ORDER
47A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
Valve
(see base)
2
4
12
14
Valve less base
3 1 5
47A-LI0-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
A 18”
1 Non-locking
BA
Flying leads
DB 24VDC (2.4 W)
C 36”
BC
Flying leads with light
DC 24VDC (1.8 W)
x
Other Options
MA
MC
Plug-in wire assy
Plug-in wire assy
DD 24VDC (1.0 W)
with light
AA
120VAC (must use with
HA
Plug-in connector with
rectified connector)
rectifier and light
xx
Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR
Port size
1/8” NPTF
1/4” NPTF
6 mm tube receptacle
Bottom cylinder ports
(18 mm)
EBM47A-00AAA-XX
EBM47A-00AAB-XX
EBM47A-00AAG-XX
EBM47A-xxxxx-xx
Bottom cylinder ports with flow controls
(18 mm)
EBM47A-00BAA-XX
EBM47A-00BAB-XX
EBM47A-00BAG-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• Flow control kit (x2) : N-37001.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
104.0
14.5
78.1
7.0
90.0
25.0 18.0
132.4
3 1 5
12
14
12
14
12
14
12
14
3
1
5
82.0
26.5
26.5
27.8
26.5
2
4 4
2
22.0
30.0
29.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size (Inlet & Exhaust) Flow (Max) Circuit bar mounting Profile
add-on style
5/2 3/8” 0.5C v
non plug-in cyl.
ports in valve
35 mm
with opt. F. C.
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
Reset
HOW TO ORDER
47A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Valve port size
Valve
2
4
12
14
1/8” NPTF
1/4” NPTF
3 1 5
47A-MG0-HXXX-XXX
47A-MH0-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
A 18”
1 Non-locking
BA
Flying leads
DB 24VDC (2.4 W)
C 36”
BC
Flying leads with light
DC 24VDC (1.8 W)
x
Other Options
MA
MC
Plug-in wire assy
Plug-in wire assy
DD 24VDC (1.0 W)
with light
AA
120VAC (must use with
HA
Plug-in connector with
rectified connector)
rectifier and light
xx
Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR
EBM47A-xxxxx-xx
Port size
COMMON INLET & EXHAUST
3/8” NPTF
Without flow controls
(20 mm)
EBM47A-01GBK-XX
With flow controls
(20 mm)
EBM47A-01HBK-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
add-a-unit stations may be added to above bars.
Maximum length for add-a-unit is 4 stations.
O P T I O N S
EBM47A-01GBK-XX
- clic replace with “C” for add-a-unit.
Consult “Precautions”before use, installation or service of MAC Valves.

4
4
4
4
2
2
2
2
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47002.
• Flow control kit (x2) : N-37001. End plate kit : M-47004-01.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
57.0 XX
25.0 20.0
3/8" - 18 N.P.T.F.
3 HOLES
BOTH ENDS
3/8" - 19 B.S.P.TR
3 HOLES
BOTH ENDS
7.0
7.0
12.0
6.7
TYP.
BOTH
ENDS
3/8" - 19 B.P.S.PL
3 HOLES
BOTH ENDS
82.0
27.8
TYP.
26.5
TYP.
5 1
3
12
14
12
14
12
14
12
14
3 1 5
132.5
30.9
TYP.
19.5
TYP.
14.5
41.0
67.5
5.20 DIA. THRU.
(4) MTG. HOLES
16.0
19.0
23.5
84.6
35.0
Number of
stations
XX
1
24.0
2
44.0
3 4
64.0 84.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting Profile
5/2 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
add-on style
non plug-in cyl.
ports in base
with opt. F. C.
35 mm
Reset
HOW TO ORDER
47A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
Valve
(see base)
2
4
12
14
Valve less base
3 1 5
47A-LI0-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
A 18”
1 Non-locking
BA
Flying leads
DB 24VDC (2.4 W)
C 36”
BC
Flying leads with light
DC 24VDC (1.8 W)
x
Other Options
MA
MC
Plug-in wire assy
Plug-in wire assy
DD 24VDC (1.0 W)
with light
AA
120VAC (must use with
HA
Plug-in connector with
rectified connector)
rectifier and light
xx
Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR
EBM47A-xxxxx-xx
Port size
1/8” NPTF
1/4” NPTF
6 mm tube receptacle
Bottom cylinder ports
(18 mm)
EBM47A-00EBA-XX
EBM47A-00EBB-XX
EBM47A-00EBG-XX
Bottom cylinder ports with flow controls
(18 mm)
EBM47A-00FBA-XX
EBM47A-00FBB-XX
EBM47A-00FBG-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
add-a-unit stations may be added to above bars. Maximum length for add-a-unit is 4 stations.
O P T I O N S
EBM47A-00EBA-XX
- clic replace with “C” for add-a-unit.
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• Flow control kit (x2) : N-37001. End plate kit : M-47004-01.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
19.0
6.7
TYP.
BOTH
ENDS
3/8" - 18 N.P.T.F.
2 HOLES
BOTH ENDS
3/8" - 19 B.S.P.TR
2 HOLES
BOTH ENDS
3/8" - 19 B.P.S.PL
2 HOLES
BOTH ENDS
125.18
54.25
27.75
5 1 3
14
14
14
12 12
12
12
14
5
1
3
14.5
41.0
67.5
4
2
4
2
4
2
22.0
30.0
7.00
TYP
99.3
12.0
21.0
16.0
5.20 DIA. THRU.
(4) MTG. HOLES
21.7
TYP.
18.0
25.0
84.6
35.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size (Inlet & Exhaust) Flow (Max) Circuit bar mounting Profile
non plug-in
5/2 3/8” 0.5C v
cyl. ports in
valve with
44 mm
opt. Pr. Reg.
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
Reset
HOW TO ORDER
47A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Valve port size
Valve
2
4
12
14
1/8” NPTF
1/4” NPTF
3 1 5
47A-MG0-HXXX-XXX
47A-MH0-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
A 18”
1 Non-locking
BA
Flying leads
DB 24VDC (2.4 W)
C 36”
BC
Flying leads with light
DC 24VDC (1.8 W)
x
Other Options
MA
MC
Plug-in wire assy
Plug-in wire assy
DD 24VDC (1.0 W)
with light
AA
120VAC (must use with
HA
Plug-in connector with
rectified connector)
rectifier and light
xx
Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR (REGULATOR ORDERED SEPARATELY)**
EBM47A-xxxxx-xx
Port size
COMMON INLET & EXHAUST
3/8” NPTF
Without regulator
(20 mm)
EBM47A-01NAK-XX
With regulator
(20 mm)
EBM47A-01PAK-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
** Pressure Regulators :
PR47A-GOAx
X=A (0 to 120 PSI)
X=B (0 to 80 PSI)
X=C (0 to 30 PSI)
Consult “Precautions”before use, installation or service of MAC Valves.

4
4
4
4
2
2
2
2
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47002.
• Regulator blanking plate : R-47003.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Dim.
“E”
Regulator with locking
adjusting screw
159.8
Regulator with
adjusting screw
155.6
Regulator with
adjusting knob
163.6
GAGE
GAGE GAGE GAGE
93.6
5.20 DIA.
4 MTG.
HOLES
14
14
14
14
3/8" - 18 N.P.T.F.
2 HOLES
BOTH ENDS
3/8" - 19 B.S.P.TR
2 HOLES
BOTH ENDS
3/8" - 19 B.P.S.PL
2 HOLES
BOTH ENDS
60.8
TYP.
35.4
TYP.
5
1
3
12
12
12
12
3 1 5
19.5
39.2
73.5
TYP.
48.0
TYP.
23.0
TYP.
"E"
10.0
TYP.
20.0
25.0
22.0
TYP.
26.2
90.0
44.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting Profile
5/2 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
non plug-in
cyl. ports
in base
44 mm
Reset
HOW TO ORDER
47A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
Valve
(see base)
2
4
12
14
Valve less base
3 1 5
47A-LI0-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
A 18”
1 Non-locking
BA
Flying leads
DB 24VDC (2.4 W)
C 36”
BC
Flying leads with light
DC 24VDC (1.8 W)
x
Other Options
MA
MC
Plug-in wire assy
Plug-in wire assy
DD 24VDC (1.0 W)
with light
AA
120VAC (must use with
HA
Plug-in connector with
rectified connector)
rectifier and light
xx
Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR
Port size
1/8” NPTF
1/4” NPTF
6 mm tube receptacle
Side cylinder ports
(18 mm)
EBM47A-00JAA-XX
EBM47A-00JAB-XX
EBM47A-00JAG-XX
EBM47A-xxxxx-xx
Bottom cylinder ports
(18 mm)
EBM47A-00LAA-XX
EBM47A-00LAB-XX
EBM47A-00LAG-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
“D”
DIMENSIONS
Number of
stations
“A”
“B”
“C”
1/4” Port
M6 Carstick port
1
2
3
4
5
- 68.0 86.0 104.0 122.0 140.0 158.0 178.0 194.0 212.0
25.90 25.90 25.90 25.90 25.90 25.90 25.90 25.90 25.90 25.90
28.60 28.60 28.60 28.60 28.60 28.60 28.60 28.60 28.60 28.60
25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00
N/A
6
7
8
9
10
3/8" - 18 N.P.T.F.
2 HOLES
BOTH ENDS
3/8" - 19 B.S.P.TR
2 HOLES
BOTH ENDS
3/8" - 19 B.P.S.PL
2 HOLES
BOTH ENDS
Dimensions are based on
18 mm centerline spacing
59.4
38.3
9.5
34.5
60.75
TYP
35.4
TYP
93.6
2 2
4 4
"D"
18.00
18.00
TYP
"C" "B"
4 4
2 2
"A"
10.0
TYP
5 1 3
12 12 12 12
14 14 14 14
3 1 5
GAGE
5.20 DIA.
2 MTG.
HOLES
1/4" - 18 N.P.T.F.
TYP. 2 PER STATION
1/4" - 19 B.S.P.TR
TYP. 2 PER STATION
1/4" - 19 B.S.P.PL
TYP. 2 PER STATION
44.0
26.20 22.00
TYP TYP
Note: Bottom & side cylinder ports not available on the same station
23.00
TYP
48.00
TYP
73.50
TYP
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting Profile
5/2 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
non plug-in
cyl. ports in
base with
Pr. Reg.
44 mm
Reset
HOW TO ORDER
47A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
Valve
(see base)
2
4
12
14
Valve less base
3 1 5
47A-LI0-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
A 18”
1 Non-locking
BA
Flying leads
DB 24VDC (2.4 W)
C 36”
BC
Flying leads with light
DC 24VDC (1.8 W)
x
Other Options
MA
MC
Plug-in wire assy
Plug-in wire assy
DD 24VDC (1.0 W)
with light
AA
120VAC (must use with
HA
Plug-in connector with
rectified connector)
rectifier and light
xx
Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR (REGULATOR ORDERED SEPARATELY)**
EBM47A-xxxxx-xx
Port size
1/8” NPTF
1/4” NPTF
6 mm tube receptacle
Side cylinder ports
(18 mm)
EBM47A-00KAA-XX
EBM47A-00KAB-XX
EBM47A-00KAG-XX
Bottom cylinder ports
(18 mm)
EBM47A-00MAA-XX
EBM47A-00MAB-XX
EBM47A-00MAG-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
** Pressure Regulators :
PR47A-GOAx
X=A (0 to 120 PSI)
X=B (0 to 80 PSI)
X=C (0 to 30 PSI)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• Regulator blanking plate : R-47003.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of
stations
1
2
3
4
5
6
7
8
9
10
3/8" - 18 N.P.T.F.
2 HOLES
BOTH ENDS
“A”
- 68.0 86.0 104.0 122.0 140.0 158.0 178.0 194.0 212.0
“B”
“C”
1/4” Port
25.90 25.90 25.90 25.90 25.90 25.90 25.90 25.90 25.90 25.90
28.60 28.60 28.60 28.60 28.60 28.60 28.60 28.60 28.60 28.60
25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00
“D”
M6 Carstick port
N/A
3/8" - 19 B.S.P.TR
2 HOLES
BOTH ENDS
3/8" - 19 B.P.S.PL
2 HOLES
BOTH ENDS
Dimensions are based on
18 mm centerline spacing
59.4
38.3
9.5
34.5
60.75
TYP
35.4
TYP
93.6
2 2
4 4
"D"
18.00
18.00
TYP
"C" "B"
4 4
2 2
"A"
10.0
TYP
3
12 12 12 12
5 1
14 14 14 14
3 1 5
GAGE
5.20 DIA.
2 MTG.
HOLES
"E"
1/4" - 18 N.P.T.F.
TYP. 2 PER STATION
1/4" - 19 B.S.P.TR
TYP. 2 PER STATION
1/4" - 19 B.S.P.PL
TYP. 2 PER STATION
Note: Bottom & side cylinder ports not available on the same station
Dim.
“E”
Regulator with locking
adjusting screw
159.8
Regulator with
adjusting screw
155.6
Regulator with
adjusting knob
163.6
44.0
26.20 22.00
TYP TYP
23.00
TYP
48.00
TYP
73.50
TYP
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting Profile
5/2 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
add-on style
non plug-in
cyl. ports in
base
44 mm
Reset
HOW TO ORDER
47A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
Valve
(see base)
2
4
12
14
Valve less base
3 1 5
47A-LI0-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
A 18”
1 Non-locking
BA
Flying leads
DB 24VDC (2.4 W)
C 36”
BC
Flying leads with light
DC 24VDC (1.8 W)
x
Other Options
MA
MC
Plug-in wire assy
Plug-in wire assy
DD 24VDC (1.0 W)
with light
AA
120VAC (must use with
HA
Plug-in connector with
rectified connector)
rectifier and light
xx
Other Options
xx
Other Options
HOW TO ORDER CIRCUIT BAR
EBM47A-xxxxx-xx
Port size
1/8” NPTF
1/4” NPTF
6 mm tube receptacle
Side cylinder ports
(18 mm)
EBM47A-00JBA-XX
EBM47A-00JBB-XX
EBM47A-00JBG-XX
Bottom cylinder ports
(18 mm)
EBM47A-00LBA-XX
EBM47A-00LBB-XX
EBM47A-00LBG-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
add-a-unit stations may be added to above bars. Maximum length for add-a-unit is 4 stations.
O P T I O N S
EBM47A-00JBA-XX
- clic replace with “C” for add-a-unit.
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• End plate kit : M-47005-01.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of 1 2 3 4 5 6 7 8 9 10
stations
“C” w/regulator
“C” w/o regulator
-
-
56.1
56.1
74.1
74.1
92.1
92.1
110.1 128.1 146.1 164.1 182.1 200.1
110.1 128.1 146.1 164.1 182.1 200.1
“D” 21.7 39.7 57.7 75.7 - - - - - -
Dimensions are based on 18 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
44.0
3/8" - 18 N.P.T.F.
2 HOLES
BOTH ENDS
3/8" - 19 B.S.P.TR
2 HOLES
BOTH ENDS
3/8" - 19 B.P.S.PL
2 HOLES
BOTH ENDS
93.6
59.4
38.3
9.5
34.5
16.0
5 1 3
5.20 DIA.
2 MTG.
HOLES
2
2
4 4
10.85
18.00
18.00
25.00 "B" "A"
4
2
"D"
"C"
10.0
TYP
12
12 12
3 1
35.4
TYP
60.75
TYP
14 14
14
5
GAGE
1/4" - 18 N.P.T.F.
TYP. 2 PER STATION
1/4" - 19 B.S.P.TR
TYP. 2 PER STATION
1/4" - 19 B.S.P.PL
TYP. 2 PER STATION
1/8" - 27 N.P.T.F.
TYP. 2 PER STATION
1/8" - 28 B.S.P.TR.
TYP. 2 PER STATION
1/8" - 28 B.S.P.PL.
TYP. 2 PER STATION
26.20 22.00
TYP TYP
Dim.
“A”
1/4”
25.90
M6 Carstick
25.90
* M6 Carstick available only on side port
23.00
TYP
48.00
TYP
73.50
TYP
“B”
28.60
28.60
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting Profile
5/2 1/8” - 1/4” 0.5C v
6 mm tube receptacle
OPERATIONAL BENEFITS
1. Direct solenoid operated valve.
2. Balanced poppet, immune to variations of
pressure.
3. Short stroke with high flow.
4. The patented solenoid develops high shifting
forces.
5. Powerful return spring.
6. Manual operator standard on all valves.
add-on style
non plug-in cyl.
ports in base
with Pr. Reg.
44 mm
Reset
HOW TO ORDER
47A-xxx-Hxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
(see base)
12
2
Valve
4
14
Valve less base
3 1 5
47A-LI0-HXXX-XXX
SOLENOID OPERATOR ➤
H XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
A 18”
DB 24VDC (2.4 W)
C 36”
DC 24VDC (1.8 W)
x Other Options
DD 24VDC (1.0 W)
AA 120VAC (must use with
rectified connector)
xx Other Options
HOW TO ORDER CIRCUIT BAR (REGULATOR ORDERED SEPARATELY)**
1 Non-locking
BA Flying leads
BC Flying leads with light
MA Plug-in wire assy
MC Plug-in wire assy
with light
HA Plug-in connector with
rectifier and light
xx Other Options
EBM47A-xxxxx-xx
Port size
1/8” NPTF
1/4” NPTF
6 mm tube receptacle
Side cylinder ports
(18 mm)
EBM47A-00KBA-XX
EBM47A-00KBB-XX
EBM47A-00KBG-XX
Bottom cylinder ports
(18 mm)
EBM47A-00MBA-XX
EBM47A-00MBB-XX
EBM47A-00MBG-XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
add-a-unit stations may be added to above bars. Maximum length for add-a-unit is 4 stations.
O P T I O N S
EBM47A-00KBA-XX
- clic replace with “C” for add-a-unit.
Consult “Precautions”before use, installation or service of MAC Valves.
** Pressure Regulators :
PR47A-GOAx
X=A (0 to 120 PSI)
X=B (0 to 80 PSI)
X=C (0 to 30 PSI)

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• End plate kit : M-47005-01. • Regulator blanking plate : R-47003.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of 1 2 3 4 5 6 7 8 9 10
stations
“C” w/regulator
“C” w/o regulator
-
-
56.1
56.1
74.1
74.1
92.1
92.1
110.1 128.1 146.1 164.1 182.1 200.1
110.1 128.1 146.1 164.1 182.1 200.1
“D” 21.7 39.7 57.7 75.7 - - - - - -
Dimensions are based on 18 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
44.0
3/8" - 18 N.P.T.F.
2 HOLES
BOTH ENDS
3/8" - 19 B.S.P.TR
2 HOLES
BOTH ENDS
3/8" - 19 B.P.S.PL
2 HOLES
BOTH ENDS
93.6
59.4
38.3
9.5
34.5
"E"
16.0
5 1 3
5.20 DIA.
2 MTG.
HOLES
2
2
4 4
10.85
18.00
18.00
25.00 "B" "A"
4
2
"D"
"C"
10.0
TYP
12
12 12
3 1
35.4
TYP
60.75
TYP
14 14
14
5
GAGE
1/4" - 18 N.P.T.F.
TYP. 2 PER STATION
1/4" - 19 B.S.P.TR
TYP. 2 PER STATION
1/4" - 19 B.S.P.PL
TYP. 2 PER STATION
1/8" - 27 N.P.T.F.
TYP. 2 PER STATION
1/8" - 28 B.S.P.TR.
TYP. 2 PER STATION
1/8" - 28 B.S.P.PL.
TYP. 2 PER STATION
Dim.
1/4”
M6 Carstick
* M6 Carstick available only on side port
26.20 22.00
TYP TYP
“A”
“B”
Dim.
“E”
25.90
28.60
25.90
28.60
Regulator with locking
adjusting screw
158.8
Regulator with
adjusting screw
155.6
Regulator with
adjusting knob
163.6
23.00
TYP
48.00
TYP
73.50
TYP
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting
5/2 1/8” - 1/4” 0.5C v
6 mm tube receptacle
plug-in
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Direct solenoid operated.
Reset
HOW TO ORDER
47A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR “PLUG-IN” CIRCUIT BAR
Valve
2
4
12
14
Valve less base
3 1 5
47A-LI0-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
DB 24VDC (2.4 W)
DC 24VDC (1.8 W)
1 Non-locking
DD 24VDC (1.0 W)
FG Plug-in with suppression diode
AA 120VAC (Mod. No. required see below)
with LED light
xx Other Options
xx Other Options
FA
FC
FE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER “PLUG-IN” CIRCUIT BAR
ECD47A-xxxxx-xxxx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
18
ECD47A-00AAA-A0XX
ECD47A-00BAA-A0XX
1/4” NPTF
18
ECD47A-00AAB-A0XX
ECD47A-00BAB-A0XX
6 mm tube receptacle
18
ECD47A-00AAG-A0XX
ECD47A-00BAG-A0XX
1/8” NPTF
30
ECD47A-01AAA-C0XX
ECD47A-01BAA-C0XX
1/4” NPTF
30
ECD47A-01AAB-C0XX
ECD47A-01BAB-C0XX
6 mm tube receptacle
30
ECD47A-01AAG-C0XX
ECD47A-01BAG-C0XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
for AC voltage use mod. FWR2 after circuit bar model number.
for multi-pin connector (9, 15 or 25).
Consult “Precautions”before use, installation or service of MAC Valves.
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal strip with light (120V)
CB = terminal strip with light (240V)
CD = terminal strip with light (24V)

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• Base wire plug-in protector : 16520.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of
stations
1
2
3
4
5
6
7
8
9
10
“E”
46.0
64.0
82.0
100.0 118.0 136.0 154.0 172.0 190.0 208.0
Dimensions are based on 18 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
136.5
3/8 N.P.T.F.
3 HOLES
BOTH ENDS
SHOWN W\ STANDARD
REGULATOR
COND.
5
1
3
79.5
40.7
20.35
44.0
19.0 23.2
28.0
TYP. TYP. TYP.
59.05
TYP. 6.0
TYP.
21.0
TYP.
45.1
TYP.
73.0
TYP.
107.5
TYP.
D
14
14
12
12
2
18.0
TYP.
E
14
14
2
12
4
2
4
12
4
COND.
5
1
3
6.25 DIA.
2 MTG.
HOLES
1"-11 1/2 N.P.S.M. CONDUIT
34.5
9.5
C
A
B
23.0 23.0
18.0
TYP.
18.0
TYP.
2
4
18.0
TYP.
Dim.
1/4”
1/8”
6 mm Legris
“A”
26.65
26.15
25.65
“B”
26.65
24.2
25.65
“C”
33.1
34.8
34.8
“D”
58.4
55.9
55.9
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting
5/2 1/8” - 1/4” 0.5C v
plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Direct solenoid operated.
Reset
HOW TO ORDER
47A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR “PLUG-IN” CIRCUIT BAR
Valve
12
2
4
14
Valve less base
3 1 5
47A-LI0-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
DB 24VDC (2.4 W)
DC 24VDC (1.8 W)
1 Non-locking
DD 24VDC (1.0 W)
FG Plug-in with suppression diode
AA 120VAC (Mod. No. required see below)
with LED light
xx Other Options
xx Other Options
FA
FC
FE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER “PLUG-IN” CIRCUIT BAR (REGULATORS ORDERED SEPARATELY)**
ECD47A-xxxxx-xxxx
Port size
Spacing mm
Bottom cylinder ports
1/8” NPTF
1/4” NPTF
1/8” NPTF
1/4” NPTF
18
18
30
30
ECD47A-00CAA-A0XX
ECD47A-00CAB-A0XX
ECD47A-01CAA-C0XX
ECD47A-01CAB-C0XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
for AC voltage use mod. FWR2 after circuit bar model number.
for multi-pin connector (9, 15 or 25).
** Pressure Regulators :
PR47A-GOAx
X=A (0 to 120 PSI)
X=B (0 to 80 PSI)
X=C (0 to 30 PSI)
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal strip with light (120V)
CB = terminal strip with light (240V)
CD = terminal strip with light (24V)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• Base wire plug-in protector : 16520. • Regulator blanking plate : R-47003.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of
stations
1
2
3
4
5
6
7
8
9
10
“E”
46.0
64.0
82.0
100.0 118.0 136.0 154.0 172.0 190.0 208.0
Dimensions are based on 18 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
F
G
SHOWN W\ SANDWICH
REGULATOR
136.5
3/8 N.P.T.F.
3 HOLES
BOTH ENDS
SHOWN W\ STANDARD
REGULATOR
COND.
5
1
3
79.5
40.7
20.35
44.0
19.0 23.2
28.0
TYP. TYP. TYP.
59.05
TYP. 6.0
TYP.
21.0
TYP.
45.1
TYP.
73.0
TYP.
107.5
TYP.
D
14
14
14
12
12
12
2
18.0
TYP.
E
14
12
2
4
COND.
5
1
3
6.25 DIA.
2 MTG.
HOLES
1"-11 1/2 N.P.S.M. CONDUIT
34.5
9.5
C
A
B
23.0 23.0
Dim.
1/4”
1/8”
6 mm Legris
18.0
TYP.
18.0
TYP.
2
4
18.0
TYP.
“A”
“B”
“C”
26.65
26.65
33.1
26.15
24.2
34.8
25.65
25.65
34.8
4
2
4
“D”
58.4
55.9
55.9
109.2
Dim.
“F”
Regulator with locking
adjusting screw
209.3
Regulator with
adjusting screw
205.1
Regulator with
adjusting knob
212.1
“G”
204.3
200.1
207.1
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting
5/2 1/8” - 1/4” 0.5C v
6 mm tube receptacle
add-on style
plug-in
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Direct solenoid operated.
Reset
HOW TO ORDER
47A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR “PLUG-IN” CIRCUIT BAR
Valve
2
4
12
14
Valve less base
3 1 5
47A-LI0-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
DB 24VDC (2.4 W)
DC 24VDC (1.8 W)
1 Non-locking
DD 24VDC (1.0 W)
FG Plug-in with suppression diode
AA 120VAC (Mod. No. required see below)
with LED light
xx Other Options
xx Other Options
FA
FC
FE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER “PLUG-IN” CIRCUIT BAR
ECD47A-xxxxx-xxxx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
18
ECD47A-00ABA-A0XX
ECD47A-00BBA-A0XX
1/4” NPTF
18
ECD47A-00ABB-A0XX
ECD47A-00BBB-A0XX
6 mm tube receptacle
18
ECD47A-00ABG-A0XX
ECD47A-00BBG-A0XX
1/8” NPTF
30
ECD47A-01ABA-C0XX
ECD47A-01BBA-C0XX
1/4” NPTF
30
ECD47A-01ABB-C0XX
ECD47A-01BBB-C0XX
6 mm tube receptacle
30
ECD47A-01ABG-C0XX
ECD47A-01BBG-C0XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
for AC voltage use mod. FWR2 after circuit bar model number.
for multi-pin connector (9, 15 or 25).
add-a-units may be added to above bars.
Consult “Precautions”before use, installation or service of MAC Valves.
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal strip with light (120V)
CB = terminal strip with light (240V)
CD = terminal strip with light (24V)

2
4
2
4
2
4
2
4
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• Base wire plug-in protector : 16520. • Isolator disc between add-a-units : 28438.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of
stations
“G”
“H”
1
2
3
4
5
- 51.85 69.85 87.85 105.85 123.85 141.85 159.85 177.85 195.85
21.70 39.70 57.70 75.70 - - - - - -
6
7
8
9
10
137.7
1"-11 1/2 N.P.S.M. CONDUIT
Dimensions are based on 18 mm centerline spacing
1 3
COND.
Note: Bottom & side cylinder ports not available on the same station
5
79.2
3/8" N.PT.F.
TYP.(3) BOTH ENDS
E
16.0
4
2
12.05
F
12
14
H
4
2
13.0
12
14
4
4
2
2
16.7
18.0
TYP.
26.15
12
A
12
14
14
G
D
C
B
9.5
TYP.
34.5
TYP.
6.0 59.05
TYP. TYP.
6.25 DIA. HOLE
TYP.(2)
44.0
40.7
23.2 19.0
3
5
20.35 28.0
TYP. TYP. 1 COND. TYP. TYP.
Dim.
“A”
“B”
“C”
“D”
“E”
1/8”
24.20
23.00
34.80
55.90
-
1/4”
24.20
23.00
33.10
58.40
-
6 mm Legris
25.65
23.00
34.80
55.90
-
21.0
TYP.
45.1
TYP.
73.0
TYP.
107.5
TYP.
“F”
12.05
12.00
14.00
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting
5/2 1/8” - 1/4” 0.5C v
add-on style
plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Direct solenoid operated.
Reset
HOW TO ORDER
47A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR “PLUG-IN” CIRCUIT BAR
Valve
12
2
4
14
Valve less base
3 1 5
47A-LI0-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
DB 24VDC (2.4 W)
DC 24VDC (1.8 W)
1 Non-locking
DD 24VDC (1.0 W)
FG Plug-in with suppression diode
AA 120VAC (Mod. No. required see below)
with LED light
xx Other Options
xx Other Options
FA
FC
FE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER “PLUG-IN” CIRCUIT BAR (REGULATORS ORDERED SEPARATELY)**
ECD47A-xxxxx-xxxx
Port size
Spacing mm
Bottom cylinder ports
1/8” NPTF
1/4” NPTF
1/8” NPTF
1/4” NPTF
18
18
30
30
ECD47A-00CBA-A0XX
ECD47A-00CBB-A0XX
ECD47A-01CBA-C0XX
ECD47A-01CBB-C0XX
Number of stations (03=3 stations)
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
for AC voltage use mod. FWR2 after circuit bar model number.
for multi-pin connector (9, 15 or 25).
add-a-units may be added to above bars.
** Pressure Regulators :
PR47A-GOAx
X=A (0 to 120 PSI)
X=B (0 to 80 PSI)
X=C (0 to 30 PSI)
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal strip with light (120V)
CB = terminal strip with light (240V)
CD = terminal strip with light (24V)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• Base wire plug-in protector : 16520. • Regulator blanking plate : R-47003. • Isolator disc between add-a-units : 28438.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of
stations
“G” w/regulator
1
-
2
3
4
5
6
54.40 72.40 90.40 108.40 126.40 144.40 162.40 180.40 199.40
7
8
9
10
SHOWN W/STANDARD
REGULATOR
J
137.7
1"-11 1/2 N.P.S.M. CONDUIT
“G” w/o regulator - 51.85 69.85 87.85 105.85 123.85 141.85 159.85 177.85 195.85
“H” w/regulator 24.25 42.25 60.25 78.25 - - - - - -
1 3
COND.
“H” w/o regulator 21.70 39.70 57.70 75.70
Dimensions are based on 18 mm
centerline spacing
-
-
-
-
-
-
3/8" N.PT.F.
TYP.(3) BOTH ENDS
5
79.2
Note: Bottom & side cylinder ports not
available on the same station
E
16.0
4
2
12.05
F
12
14
H
4
2
13.0
4
2
12
14
4
16.7
18.0
TYP.
26.15
12
4
2
2
A
2
4
12
14
14
G
D
C
B
9.5
TYP.
34.5
TYP.
6.0 59.05
TYP. TYP.
K
SHOWN W/SANDWICH
REGULATOR
6.25 DIA. HOLE
TYP.(2)
Dim.
“A”
“B”
“C”
“D”
“E”
“F”
Dim.
“J”
“K”
1/8”
24.20
23.00
34.80
55.90
-
12.05
1/4”
24.20
23.00
33.10
58.40
-
12.00
Regulator with locking
adjusting screw
209.3
204.3
6 mm Legris
25.65
23.00
34.80
55.90
-
14.00
1/8” w/regulator
-
-
34.80
55.90
10.75
-
1/4” w/regulator
-
23.00
33.10
58.40
10.85
-
Regulator with
adjusting screw
205.1
200.1
Regulator with
adjusting knob
212.1
207.1
103.0
44.0
40.7
23.2 19.0
3
5
20.35 28.0
TYP. TYP. 1 COND. TYP. TYP.
21.0
TYP.
45.1
TYP.
73.0
TYP.
107.5
TYP.
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting
5/2 1/8” - 1/4” 0.5C v
6 mm tube receptacle
plug-in
add-a-unit
stations
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Direct solenoid operated.
Reset
HOW TO ORDER
47A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR “PLUG-IN” CIRCUIT BAR
Valve
2
4
12
14
Valve less base
3 1 5
47A-LI0-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
DB 24VDC (2.4 W)
DC 24VDC (1.8 W)
1 Non-locking
DD 24VDC (1.0 W)
FG Plug-in with suppression diode
AA 120VAC (Mod. No. required see below)
with LED light
xx Other Options
xx Other Options
FA
FC
FE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER “PLUG-IN” CIRCUIT BAR
ECD47A-xxxxx-xxxx
Port size
Spacing
mm
Side cylinder ports
Bottom cylinder ports
1/8” NPTF
18
ECD47A-00ACA-A0XX
ECD47A-00BCA-A0XX
1/4” NPTF
18
ECD47A-00ACB-A0XX
ECD47A-00BCB-A0XX
6 mm tube receptacle
18
ECD47A-00ACG-A0XX
ECD47A-00BCG-A0XX
1/8” NPTF
30
ECD47A-01ACA-C0XX
ECD47A-01BCA-C0XX
1/4” NPTF
30
ECD47A-01ACB-C0XX
ECD47A-01BCB-C0XX
6 mm tube receptacle
30
ECD47A-01ACG-C0XX
ECD47A-01BCG-C0XX
Number of stations (01=1 station). Maximum length is 4 stations
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
when add-a-unit stations are added to bars with a multi-pin connector,
MOD SD03 should be included with add-a-unit model number.
for AC voltage use mod. FWR2 after circuit bar model number.
Consult “Precautions”before use, installation or service of MAC Valves.
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal strip with light (120V)
CB = terminal strip with light (240V)
CD = terminal strip with light (24V)

2
4
2
4
2
4
2
4
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• O-ring port seal (x3) : 17015-01 • Tie rod (x2) : 79007-01 (one station length).
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of
stations
“G”
“H”
1
2
3
4
5
- 51.85 69.85 87.85 105.85 123.85 141.85 159.85 177.85 195.85
21.70 39.70 57.70 75.70 - - - - - -
6
7
8
9
10
137.7
1"-11 1/2 N.P.S.M. CONDUIT
Dimensions are based on 18 mm centerline spacing
1 3
COND.
Note: Bottom & side cylinder ports not available on the same station
5
79.2
3/8" N.PT.F.
TYP.(3) BOTH ENDS
E
16.0
4
2
12.05
F
12
14
H
4
2
13.0
12
14
4
4
2
2
16.7
18.0
TYP.
26.15
12
A
12
14
14
G
D
C
B
9.5
TYP.
34.5
TYP.
6.0 59.05
TYP. TYP.
6.25 DIA. HOLE
TYP.(2)
44.0
40.7
23.2 19.0
3
5
20.35 28.0
TYP. TYP. 1 COND. TYP. TYP.
Dim.
“A”
“B”
“C”
“D”
“E”
1/8”
24.20
23.00
34.80
55.90
-
1/4”
24.20
23.00
33.10
58.40
-
6 mm Legris
25.65
23.00
34.80
55.90
-
21.0
TYP.
45.1
TYP.
73.0
TYP.
107.5
TYP.
“F”
12.05
12.00
14.00
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 47
Function Port size Flow (Max) Circuit bar mounting
5/2 1/8” - 1/4” 0.5C v
add-a-unit
stations
plug-in
with Pr. Reg.
OPERATIONAL BENEFITS
1. Balanced poppet, immune to variations of
pressure.
2. Short stroke with high flow.
3. The patented solenoid develops high shifting
forces.
4. Powerful return spring.
5. Manual operator standard on all valves.
6. Direct solenoid operated.
Reset
HOW TO ORDER
47A-xxx-HxxP-xxx
HOW TO ORDER VALVE FOR “PLUG-IN” CIRCUIT BAR
Valve
12
2
4
14
Valve less base
3 1 5
47A-LI0-HXXP-XXX
SOLENOID OPERATOR ➤
H XX P- X XX *
XX Voltage
X Manual operator
XX
Electrical connection
DA 24VDC (5.2 W)
DB 24VDC (2.4 W)
DC 24VDC (1.8 W)
1 Non-locking
DD 24VDC (1.0 W)
FG Plug-in with suppression diode
AA 120VAC (Mod. No. required see below)
with LED light
xx Other Options
xx Other Options
FA
FC
FE
Plug-in
Plug-in with light
Plug-in with suppression diode
HOW TO ORDER “PLUG-IN” CIRCUIT BAR (REGULATORS ORDERED SEPARATELY)**
ECD47A-xxxxx-xxxx
Port size
Spacing mm
Bottom cylinder ports
1/8” NPTF
1/4” NPTF
1/8” NPTF
1/4” NPTF
18
18
30
30
ECD47A-00CCA-A0XX
ECD47A-00CCB-A0XX
ECD47A-01CCA-C0XX
ECD47A-01CCB-C0XX
Number of stations (01=1 station). Maximum length is 4 stations
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
when add-a-unit stations are added to bars with a multi-pin connector,
MOD SD03 should be included with add-a-unit model number.
for AC voltage use mod. FWR2 after circuit bar model number.
** Pressure Regulators :
PR47A-GOAx
X=A (0 to 120 PSI)
X=B (0 to 80 PSI)
X=C (0 to 30 PSI)
A0 = without light
AA = with light (120V)
AB = with light (240V)
AD = with light (24V)
C0 = terminal strip
CA = terminal strip with light (120V)
CB = terminal strip with light (240V)
CD = terminal strip with light (24V)
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 47
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times :
(with 5.2 W coil)
Compressed air, vacuum, inert gases
Vacuum to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
40 μ
0°F to 120°F (-18°C to 50°C)
4.3 mm
5.2 W : 0.50C v , 2.4 W : 0.30C v , 1.8 W : 0.25C v , 1.0 W : 0.25C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
5.2 W - 2.4 W - 1.8 W - 1.0 W
Energize : 14.0 ms
De-energize : 5.0 ms
Note :
Spare parts :
Options :
• Valve and coil are not interchangeable.
• Seal between valve and bar : 16629. • Mounting screw (x2) : 35043. • Valve blanking plate : M-47001.
• O-ring port seal (x3) : 17015-01 • Tie rod (x2) : 79007-01 (one station length). • Regulator blanking plate : R-47003.
• Isolation of inlet and/or exhaust. Special bar. Consult factory. • BSPP Threads.
DIMENSIONS
Number of
stations
“G” w/regulator
1
-
2
3
4
5
6
54.40 72.40 90.40 108.40 126.40 144.40 162.40 180.40 199.40
7
8
9
10
SHOWN W/STANDARD
REGULATOR
J
137.7
1"-11 1/2 N.P.S.M. CONDUIT
“G” w/o regulator - 51.85 69.85 87.85 105.85 123.85 141.85 159.85 177.85 195.85
“H” w/regulator 24.25 42.25 60.25 78.25 - - - - - -
1 3
COND.
“H” w/o regulator 21.70 39.70 57.70 75.70
Dimensions are based on 18 mm
centerline spacing
-
-
-
-
-
-
3/8" N.PT.F.
TYP.(3) BOTH ENDS
5
79.2
Note: Bottom & side cylinder ports not
available on the same station
E
16.0
4
2
12.05
F
12
14
H
4
2
13.0
4
2
12
14
4
16.7
18.0
TYP.
26.15
12
4
2
2
A
2
4
12
14
14
G
D
C
B
9.5
TYP.
34.5
TYP.
6.0 59.05
TYP. TYP.
K
SHOWN W/SANDWICH
REGULATOR
6.25 DIA. HOLE
TYP.(2)
Dim.
“A”
“B”
“C”
“D”
“E”
“F”
Dim.
“J”
“K”
1/8”
24.20
23.00
34.80
55.90
-
12.05
1/4”
24.20
23.00
33.10
58.40
-
12.00
Regulator with locking
adjusting screw
209.3
204.3
6 mm Legris
25.65
23.00
34.80
55.90
-
14.00
1/8” w/regulator
-
-
34.80
55.90
10.75
-
1/4” w/regulator
-
23.00
33.10
58.40
10.85
-
Regulator with
adjusting screw
205.1
200.1
Regulator with
adjusting knob
212.1
207.1
103.0
44.0
40.7
23.2 19.0
3
5
20.35 28.0
TYP. TYP. 1 COND. TYP. TYP.
21.0
TYP.
45.1
TYP.
73.0
TYP.
107.5
TYP.
Consult “Precautions”before use, installation or service of MAC Valves.

Section 2 Options
Consult “Precautions” before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Codification table for voltages / Wire length / Manual operators / Electrical connections
VALVE CODE ➤
- H XX X - X XX
1 2 3 4
OPTIONS AVAILABLE FOR
- Solenoid valves 37 & 47 Series
Consult “Precautions”before use, installation or service of MAC Valves.

OPTIONS
Back
1. VOLTAGE
- H XX X - X XX VOLTAGE
DC Options
DA 24 VDC (5.2 W)
DB 24 VDC (2.4 W)
DC 24 VDC (1.8 W)
DD 24 VDC (1.0 W)
DF 12 VDC (5.2 W)
DG 12 VDC (2.4 W)
DH 12 VDC (1.8 W)
DJ 12 VDC (1.0 W)
DL 120 VDC (6.3 W)
AC Options (50/60hz)
AA 120 VAC (6.7 W)
AB 220 VAC (5.6 W)
AC 240 VAC (5.8 W)
AD 24 VAC (7.8 W)
Note : AC Voltages only available with “H” & “F” type connectors. MOD FWR2 must be used with the “F” type connectors.
2. WIRE LENGTH
- H XX X - X XX WIRE LENGTH
O
No lead wire
A 18”
B 24”
C 36”
D 48”
E 72”
F 96”
G 120”
H 144”
P
Plug-in (used only with “F”type connector Opts.)
Use “O” with MJ & MM Opts.
3. MANUAL OPERATOR
- H XX X - X XX MANUAL OPERATOR
0 No operator
1 Non-locking recessed
2 Locking recessed
3 Non-locking extended
4 Locking extended
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Back
4. ELECTRICAL CONNECTION
- H XX X - X XX ELECTRICAL CONNECTION
BA Flying leads
BB Flying leads with ground wire
BC Flying leads with led light
BD Flying leads with led light & ground wire
BE Flying leads with suppression diode
BF Flying leads with suppression diode & ground wire
BG Flying leads with suppression diode plus led light
BH Flying leads with suppression diode plus led light & ground wire
*BN Flying leads with suppression diode plus blocking diode
*BP Flying leads with suppression diode plus blocking diode & ground wire
*BR Flying leads with suppression diode plus blocking diode & led light
*BS Flying leads with suppression diode plus blocking diode & led light & ground wire
FA
FB
FC
FD
FE
FF
FG
FH
Plug-in
Plug-in with ground wire
Plug-in with led light
Plug-in with led light & ground wire
Plug-in with suppression diode
Plug-in with suppression diode & ground wire
Plug-in with suppression diode plus led light
Plug-in with suppression diode plus led light & ground wire
Note : FA ---- FH options for use with ECD type circuit bars
HA
HB
HC
HD
HL
HN
Circuit board plug-in with full wave rectifier & led light
Circuit board with full wave rectifier & led with ground wire
Same as “HA” without lead wires
Same as “HB” without lead wires
Circuit board plug-in with suppression diode plus blocking diode & led light
Same as “HL” without lead wires
MA Plug-in wire assembly
MB Plug-in wire assembly with ground wire
MC Plug-in wire assembly with led light
MD Plug-in wire assembly led light & ground wire
ME Plug-in wire assembly with suppression diode
MF Plug-in wire assembly with suppression diode & ground wire
*MG Plug-in wire assembly suppression diode plus led light
*MH Plug-in wire assembly suppression diode plus led light & ground wire
*MN Plug-in wire assembly with suppression diode plus blocking diode
*MP Plug-in wire assembly with suppression diode plus blocking diode & ground wire
MR Plug-in wire assembly with suppression diode plus blocking diode & led light
MS Plug-in wire assembly with suppression diode plus blocking diode & led light & ground wire
MJ Plug-in housing w/o wire assembly (“MA” option without wire assembly)
MM Plug-in housing w/o wire assembly (“MB” option without wire assembly)
* Blocking diode is in lead wire.
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
PIN #6
PIN #9
MOD. SD09
PIN #1
PIN #5
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 9
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 7 max.
• Max. 24 V=/5.4 W per solenoid
• 2 common wires
PIN #9
PIN #15
MOD. SD15
PIN #1
PIN #8
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 15
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 12 max.
• Max. 24 V=/5.4 W per solenoid
• 3 common wires
PIN #14
PIN #25
MOD. SD25
PIN #1
PIN #13
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 25
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 20 max.
• Max. 24 V=/5.4 W per solenoid
• 5 common wires
Note : Use desired MOD. number after circuit bar part number

O p t i o n s
OPTIONS
Connector termination details
CONNECTOR
SOL 1
SOL 2 SOL 3 SOL .. SOL 20 SOL 21 SOL 22 SOL 23 SOL 24
Single solenoid circuit bar
SOL 2 SOL 4 SOL 6 SOL 8 SOL 16 SOL 18 SOL 20 SOL 22 SOL 24
CONNECTOR
SOL 1 SOL 3 SOL 5 SOL 13 SOL 15 SOL 17 SOL 19 SOL 21 SOL 23
Double solenoid circuit bar
SD09 SD15 SD25
1
SOL. 1
1
SOL. 1
1
SOL. 1
2
SOL. 2
2
SOL. 2
2
SOL. 2
3
SOL. 3
3
SOL. 3
3
SOL. 3
4
SOL. 4
4
SOL. 4
4
SOL. 4
8
COMMON (+)
13
COMMON (+)
21
COMMON (+)
5
SOL. 5
5
SOL. 5
5
SOL. 5
6
SOL. 6
6
SOL. 6
6
SOL. 6
7
SOL. 7
7
SOL. 7
7
SOL. 7
9
COMMON (+)
8
SOL. 8
8
SOL. 8
14
COMMON (+)
22
COMMON (+)
9
SOL. 9
9
SOL. 9
10 SOL. 10
10 SOL. 10
11
SOL. 11
11
SOL. 11
12 SOL. 12
12 SOL. 12
15
COMMON (+)
23
COMMON (+)
13
SOL. 13
14 SOL. 14
15
SOL. 15
16 SOL. 16
24
COMMON (+)
17
18 SOL. 18
19
20 SOL. 20
SOL. 17
SOL. 19
25
COMMON (+)

Direct solenoid and solenoid pilot operated valves
Series 400
Circuit bar mounting
low profile
cylinder ports
in valve
low profile
cylinder ports
in base
mid profile
cylinder ports
in valve
mid profile -
add on style
cylinder ports
in valve
add-a-unit
stations for
CBM403A bar
mid profile
cylinder ports
in base
mid profile -
add on style
cylinder ports
in base
add-a-unit
stations for
CBM404A bar
high profile
cylinder ports
in base
high profile -
add on style
cylinder ports
in base
add-a-unit
stations for
CBM405A bar
Manual operator
Solenoid
4-way pilot with balanced poppet
Bonded spool
2 4
Air return
3
1 5
SERIES FEATURES
• Patented MACSOLENOID ® for fastest possible response times
and virtually burn-out proof AC solenoid operation.
• Optional low watt DC solenoids.
• Various manual operators.
• Optional memory spring.
• 2 position or 3 position valve configurations.
• Internal or external pilot.
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 400
Function Port size (NPTF) Flow (Max) Circuit bar mounting
5/2 - 5/3 1/8” - 1/4” 1.0C v
low profile
cylinder ports
in valve
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
xxxx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
Pilot air
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
2 4
12 14
2 4
12 14
12 2 4 14
12 2 4 14
12 2 4 14
1/8” NPT
Internal
315
411A-AOA-DM-DXXX-XXX
411A-COA-DM-DXXX-XXX
315
421A-AOA-DM-DXXX-XXX
315
451A-AOA-DM-DXXX-XXX
315
461A-AOA-DM-DXXX-XXX
315
471A-AOA-DM-DXXX-XXX
1/4” NPT
411A-BOA-DM-DXXX-XXX
421A-BOA-DM-DXXX-XXX
451A-BOA-DM-DXXX-XXX
461A-BOA-DM-DXXX-XXX
471A-BOA-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
JB 240/60, 220/50
JA 120/60, 110/50
JC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
A
J
x
18” (Flying leads)
Connector
Other Options
1 Non-locking
2 Locking
x Other Options
KA
KD
JB
JD
BA
xx
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
HOW TO ORDER CIRCUIT BAR **
CBM401A-xxxxx-xx
Port size
Pilot air
Spacing standard 19,5 mm
w/o flow controls
w/ flow controls
Spacing 26 mm (Rectangular connector)
w/o flow controls
w/ flow controls
3/8” NPTF
Internal
CBM401A-00AAA-XX
CBM401A-00BAA-XX
CBM401A-02AAA-XX
CBM401A-02BAA-XX
Number of stations (03=3 stations)
** Other options available. Consult factory.
O P T I O N S
411A-AOA-DM-DXXX-XXX
- clic with memory spring (replace by 4).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 400
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Compressed air, vacuum, inert gases
20 - 150 PSI
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories :
Options :
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35069 and seal 16524.
• Blanking plate : M-04001. • Flow control (x2) : N-04001. • Seal (x2) : 17013-01, (x1) : 17015-01.
• Mounting screw (x2) : 35043.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
108.5 94.3
18.5
16.0
C L
14.5
14
14
14
14
3
5 1
12
12
12
12
3 1 5
82.0
118.0 DOUBLE
108.2 SINGLE
41.0
67.5
94.5
7.0
25.0 39.0 19.5
6.7
21.5
32.0
C L
3/8" PORTS
TYP.
É” 6.50 TYP.
1/8" PORTS
TYP.
27.8
31.5
50.7
25.0
64.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 400
Function Port size (NPTF) Flow (Max) Circuit bar mounting
5/2 - 5/3 1/8” 1.0C v
low profile
cylinder ports
in base
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
xxxx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Pilot air
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
2 4
12 14
2 4
12 14
12 2 4 14
12 2 4 14
12 2 4 14
Internal
315
413A-OOA-DM-DXXX-XXX
315
423A-OOA-DM-DXXX-XXX
315
453A-OOA-DM-DXXX-XXX
315
463A-OOA-DM-DXXX-XXX
315
473A-OOA-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
JB 240/60, 220/50
JA 120/60, 110/50
JC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
A
J
x
18” (Flying leads)
Connector
Other Options
1 Non-locking
2 Locking
x Other Options
KA
KD
JB
JD
BA
xx
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
HOW TO ORDER CIRCUIT BAR (BOTTOM CYLINDER PORTS) **
CBM402A-xxxxx-xx
Port size
Pilot air
Spacing standard 19,5 mm
w/o flow controls
w/ flow controls
Spacing 26 mm (Rectangular connector)
w/o flow controls
w/ flow controls
1/8” NPTF
Internal
CBM402A-00AAA-XX
CBM402A-00BAA-XX
CBM402A-02AAA-XX
CBM402A-02BAA-XX
Number of stations (03=3 stations)
** Other options available. Consult factory.
O P T I O N S
413A-OOA-DM-DXXX-XXX
- clic with memory spring (replace by 6).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 400
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Compressed air, vacuum, inert gases
20 - 150 PSI
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories :
Options :
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35069 and seal 16524.
• Blanking plate : M-04002. • Flow control (x2) : N-04001. • Seal : 16525.
• Mounting screw (x2) : 35043.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
108.5 94.3
18.5
16.0
C L
14.5
14
14
14
14
3
5 1
12
12
12
12
3 1 5
82.0
118.0 DOUBLE
108.2 SINGLE
41.0
67.5
94.5
7.0
6.7
21.5
32.0
C L
3/8" PORTS
TYP.
Ø 6.50 TYP.
1/8" PORTS
TYP.
27.8
31.5
50.7
25.0
64.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 400
Function Port size (NPTF) Flow (Max) Circuit bar mounting
5/2 - 5/3 1/8” - 1/4” 1.0C v
mid profile
cylinder ports
in valve
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
xxxx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
Pilot air
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
2 4
12 14
2 4
12 14
12 2 4 14
12 2 4 14
12 2 4 14
1/8” NPT
Internal
315
411A-AOA-DM-DXXX-XXX
411A-COA-DM-DXXX-XXX
315
421A-AOA-DM-DXXX-XXX
315
451A-AOA-DM-DXXX-XXX
315
461A-AOA-DM-DXXX-XXX
315
471A-AOA-DM-DXXX-XXX
1/4” NPT
411A-BOA-DM-DXXX-XXX
421A-BOA-DM-DXXX-XXX
451A-BOA-DM-DXXX-XXX
461A-BOA-DM-DXXX-XXX
471A-BOA-DM-DXXX-XXX
1/8” NPT
External
411A-AOD-DM-DXXX-XXX
421A-AOD-DM-DXXX-XXX
451A-AOD-DM-DXXX-XXX
461A-AOD-DM-DXXX-XXX
471A-AOD-DM-DXXX-XXX
1/4” NPT
411A-BOD-DM-DXXX-XXX
421A-BOD-DM-DXXX-XXX
451A-BOD-DM-DXXX-XXX
461A-BOD-DM-DXXX-XXX
471A-BOD-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
JB 240/60, 220/50
JA 120/60, 110/50
JC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR **
A
J
x
18” (Flying leads)
Connector
Other Options
1 Non-locking
2 Locking
x
Other Options
KA
KD
JB
JD
BA
xx
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
CBM403A-xxxxx-xx
Port size
Pilot air
Spacing standard 19,5 mm
w/o flow controls
w/ flow controls
Spacing 26 mm (Rectangular connector)
w/o flow controls
w/ flow controls
3/8” NPTF
Internal
CBM403A-00AAA-XX
CBM403A-00BAA-XX
CBM403A-02AAA-XX
CBM403A-02BAA-XX
Common external
CBM403A-00CAA-XX
CBM403A-00DAA-XX
CBM403A-02CAA-XX
CBM403A-02DAA-XX
Number of stations (03=3 stations)
** Other options available. Consult factory.
O P T I O N S
411A-AOA-DM-DXXX-XXX
- clic with memory spring (replace by 4).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 400
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories :
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum - 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35069 and seal 16524.
• Blanking plate : M-04001. • Flow control (x2) : N-04001. • Seal (x2) : 17013-01, (x1) : 17015-01.
• Mounting screw (x2) : 35043.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
32,0
125,0 DOUBLE (45)
96,0 SINGLE (45)
27,75
5 1 3
7,0
C L
4 2
19,5
69,5
100,3
C L
4 2
25,0
5 1 3
26,5
21,0
8,0
15,0 20,5
24,5
38,0
Ø 6,5
3/8"
67,5
32,0
41,0
14,5
1/8” EXTERNAL
PILOT PORT
(OPTIONAL)
82,0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 400
Function Port size (NPTF) Flow (Max) Circuit bar mounting
5/2 - 5/3 1/8” - 1/4” 1.0C v
add on style
cylinder ports
mid profile -
in valve
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
xxxx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
Pilot air
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
2 4
12 14
2 4
12 14
12 2 4 14
12 2 4 14
12 2 4 14
1/8” NPT
Internal
315
411A-AOA-DM-DXXX-XXX
411A-COA-DM-DXXX-XXX
315
421A-AOA-DM-DXXX-XXX
315
451A-AOA-DM-DXXX-XXX
315
461A-AOA-DM-DXXX-XXX
315
471A-AOA-DM-DXXX-XXX
1/4” NPT
411A-BOA-DM-DXXX-XXX
421A-BOA-DM-DXXX-XXX
451A-BOA-DM-DXXX-XXX
461A-BOA-DM-DXXX-XXX
471A-BOA-DM-DXXX-XXX
1/8” NPT
External
411A-AOD-DM-DXXX-XXX
421A-AOD-DM-DXXX-XXX
451A-AOD-DM-DXXX-XXX
461A-AOD-DM-DXXX-XXX
471A-AOD-DM-DXXX-XXX
1/4” NPT
411A-BOD-DM-DXXX-XXX
421A-BOD-DM-DXXX-XXX
451A-BOD-DM-DXXX-XXX
461A-BOD-DM-DXXX-XXX
471A-BOD-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
JB 240/60, 220/50
JA 120/60, 110/50
JC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR **
A
J
x
18” (Flying leads)
Connector
Other Options
1 Non-locking
2 Locking
x
Other Options
KA
KD
JB
JD
BA
xx
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
CBM403A-xxxxx-xx
Port size
Pilot air
Spacing standard 19,5 mm
w/o flow controls
w/ flow controls
Spacing 26 mm (Rectangular connector)
w/o flow controls
w/ flow controls
3/8” NPTF
Internal
CBM403A-00ABA-XX
CBM403A-00BBA-XX
CBM403A-02ABA-XX
CBM403A-02BBA-XX
Common external
CBM403A-00CBA-XX
CBM403A-00DBA-XX
CBM403A-02CBA-XX
CBM403A-02DBA-XX
Number of stations (03=3 stations)
** Other options available. Consult factory.
Note: add-a-unit stations may be added to above bars.
O P T I O N S
411A-AOA-DM-DXXX-XXX
- clic with memory spring (replace by 4).
Consult “Precautions”before use, installation or service of MAC Valves.

4
2
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 400
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories :
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum - 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35069 and seal 16524.
• Blanking plate : M-04001. • Flow control (x2) : N-04001. • Seal (x2) : 17013-01, (x1) : 17015-01.
• Mounting screw (x2) : 35043. • End plate kit : M-04003-01. • End plate kit for common external : M-04004-01.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
113.0 99.0
100.3
24.5
Ø 6.5 TYP.
21.0
C L
C L
15.0
7.0
5 1 3
14
12
14
4 2
12
14
4 2
12
14
4 2
12
3
1 5
117.5 DOUBLE
32.0
82.0
107.9 SINGLE
18.0
14.5
32.0
41.0
67.5
27.8
1/8" EXTERNAL
PILOT PORT
25.0
19.5
6.5
8.0
OPTIONAL
55.0
40.5
21.0
16.0
1/8" PORTS
TYP. 8 PLACES
3/8" PORTS
TYP.
20.5
380
C L
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 400
Function Port size (NPTF) Flow (Max) Circuit bar mounting
5/2 - 5/3 1/8” - 1/4” 1.0C v
add-a-unit
stations for
CBM403A bar
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
xxxx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
Pilot air
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
2 4
12 14
2 4
12 14
12 2 4 14
12 2 4 14
12 2 4 14
1/8” NPT
Internal
315
411A-AOA-DM-DXXX-XXX
411A-COA-DM-DXXX-XXX
315
421A-AOA-DM-DXXX-XXX
315
451A-AOA-DM-DXXX-XXX
315
461A-AOA-DM-DXXX-XXX
315
471A-AOA-DM-DXXX-XXX
1/4” NPT
411A-BOA-DM-DXXX-XXX
421A-BOA-DM-DXXX-XXX
451A-BOA-DM-DXXX-XXX
461A-BOA-DM-DXXX-XXX
471A-BOA-DM-DXXX-XXX
1/8” NPT
External
411A-AOD-DM-DXXX-XXX
421A-AOD-DM-DXXX-XXX
451A-AOD-DM-DXXX-XXX
461A-AOD-DM-DXXX-XXX
471A-AOD-DM-DXXX-XXX
1/4” NPT
411A-BOD-DM-DXXX-XXX
421A-BOD-DM-DXXX-XXX
451A-BOD-DM-DXXX-XXX
461A-BOD-DM-DXXX-XXX
471A-BOD-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
JB 240/60, 220/50
JA 120/60, 110/50
JC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR **
A
J
x
18” (Flying leads)
Connector
Other Options
1 Non-locking
2 Locking
x
Other Options
KA
KD
JB
JD
BA
xx
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
CBM403A-xxxxx-xx
Port size
Pilot air
Spacing 21 mm
w/o flow controls
w/ flow controls
Spacing 26 mm (Rectangular connector)
w/o flow controls
w/ flow controls
3/8” NPTF
Internal
CBM403A-01AEA-XX
CBM403A-01BEA-XX
CBM403A-02AEA-XX
CBM403A-02BEA-XX
Common external
CBM403A-01CEA-XX
CBM403A-01DEA-XX
CBM403A-02CEA-XX
CBM403A-02DEA-XX
Number of stations (01, 02, 03, or 04)
** Other options available. Consult factory.
O P T I O N S
411A-AOA-DM-DXXX-XXX
- clic with memory spring (replace by 4).
Consult “Precautions”before use, installation or service of MAC Valves.

4
2
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 400
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories :
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum - 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35069 and seal 16524.
• Blanking plate : M-04001. • Flow control (x2) : N-04001. • Seal (x2) : 17013-01, (x1) : 17015-01.
• Mounting screw (x2) : 35043. • End plate kit : M-04003-01. • End plate kit for common external : M-04004-01.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
113.0 99.0
100.3
24.5
Ø 6.5 TYP.
21.0
C L
C L
15.0
7.0
5 1 3
14
12
14
4 2
12
14
4 2
12
14
4 2
12
3
1 5
117.5 DOUBLE
32.0
82.0
107.9 SINGLE
18.0
14.5
32.0
41.0
67.5
27.8
1/8" EXTERNAL
PILOT PORT
25.0
19.5
6.5
8.0
OPTIONAL
55.0
40.5
21.0
16.0
1/8" PORTS
TYP. 8 PLACES
3/8" PORTS
TYP.
20.5
380
C L
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 400
Function Port size (NPTF) Flow (Max) Circuit bar mounting
5/2 - 5/3 1/8” - 1/4” 1.0C v
mid profile
cylinder ports
in base
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
xxxx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Pilot air
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
2 4
12 14
2 4
12 14
12 2 4 14
12 2 4 14
12 2 4 14
Internal
315
413A-OOA-DM-DXXX-XXX
315
423A-OOA-DM-DXXX-XXX
315
453A-OOA-DM-DXXX-XXX
315
463A-OOA-DM-DXXX-XXX
315
473A-OOA-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
JB 240/60, 220/50
A 18” (Flying leads)
JA 120/60, 110/50
J Connector
JC 24/60, 24/50
x Other Options
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR (BOTTOM CYLINDER PORTS) **
1 Non-locking
2 Locking
x
Other Options
KA
KD
JB
JD
BA
xx
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
CBM404A-xxxxx-xx
Port size
Pilot air
Spacing standard 19,5 mm
w/o flow controls
w/ flow controls
Spacing 26 mm (Rectangular connector)
w/o flow controls
w/ flow controls
1/8” NPTF
1/4” NPTF
Internal
Internal
CBM404A-00AAA-XX
CBM404A-00AAD-XX
CBM404A-00BAA-XX
CBM404A-00BAD-XX
CBM404A-02AAA-XX
CBM404A-02AAD-XX
CBM404A-02BAA-XX
CBM404A-02BAD-XX
Number of stations (03=3 stations)
** Other options available. Consult factory.
O P T I O N S
413A-OOA-DM-DXXX-XXX
- clic with memory spring (replace by 6).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 400
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Compressed air, vacuum, inert gases
20 - 150 PSI
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories :
Options :
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35069 and seal 16524.
• Blanking plate : M-04002. • Flow control (x2) : N-04001. • Seal : 16525.
• Mounting screw (x2) : 35043.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
32,0
125,0 DOUBLE (45)
96,0 SINGLE (45)
27,8
100,3
C L
5 1 3
4 2
7,0
C L
4 2
19,5
69,5
25,0
5 1 3
26,5
21,0
15,0 20,5
24,5
38,0
3/8 " PORTS
4 2
14,5
B A
41,0
67,5
82,0
Port size
A
B
1/8”
1/4”
31.5
32.0
19.0
20.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 400
Function Port size (NPTF) Flow (Max) Circuit bar mounting
5/2 - 5/3 1/8” - 1/4” 1.0C v
add on style
cylinder ports
mid profile -
in base
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
xxxx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Pilot air
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
2 4
12 14
2 4
12 14
12 2 4 14
12 2 4 14
12 2 4 14
Internal
315
413A-OOA-DM-DXXX-XXX
315
423A-OOA-DM-DXXX-XXX
315
453A-OOA-DM-DXXX-XXX
315
463A-OOA-DM-DXXX-XXX
315
473A-OOA-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
JB 240/60, 220/50
A 18” (Flying leads)
JA 120/60, 110/50
J Connector
JC 24/60, 24/50
x Other Options
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR (BOTTOM CYLINDER PORTS) **
1 Non-locking
2 Locking
x
Other Options
KA
KD
JB
JD
BA
xx
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
CBM404A-xxxxx-xx
Port size
Pilot air
Spacing standard 19,5 mm
w/o flow controls
w/ flow controls
Spacing 26 mm (Rectangular connector)
w/o flow controls
w/ flow controls
1/8” NPTF
1/4” NPTF
Internal
Internal
CBM404A-00ABA-XX
CBM404A-00ABD-XX
CBM404A-00BBA-XX
CBM404A-00BBD-XX
CBM404A-02ABA-XX
CBM404A-02ABD-XX
CBM404A-02BBA-XX
CBM404A-02BBD-XX
Number of stations (03=3 stations)
** Other options available. Consult factory.
Note: add-a-unit stations may be added to above bars.
O P T I O N S
413A-OOA-DM-DXXX-XXX
- clic with memory spring, replace by 6.
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 400
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Compressed air, vacuum, inert gases
20 - 150 PSI
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories :
Options :
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35069 and seal 16524.
• Blanking plate : M-04002. • Flow control (x2) : N-04001. • Seal : 16525.
• Mounting screw (x2) : 35043. • End plate kit : M-04003-01.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
113.0
100.3
É” 6.5 TYP.
24.5
21.0
15.0
5 1 3
14
12
14
12
14
12
CL
14
12
CL LC
3
1
5
82.0
117.5 DOUBLE
107.9 SINGLE
14.5
32.0
41.0
67.5
99.0
7.0
25.0
19.5
6.5
8.0
1/8" EXTERNAL
PILOT PORT
OPTIONAL
2
2
2
2
27.8
31.5
50.5
40.5
3/8" PORTS
TYP.
4
4
4
4
1/8" PORTS
55.0 21.0
16.0
TYP. 8 PLACES
20.5
38.0
42.0
26.5
C L
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 400
Function Port size (NPTF) Flow (Max) Circuit bar mounting
5/2 - 5/3 1/8” - 1/4” 1.0C v
add-a-unit
stations for
CBM404A bar
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
xxxx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Pilot air
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
2 4
12 14
2 4
12 14
12 2 4 14
12 2 4 14
12 2 4 14
Internal
315
413A-OOA-DM-DXXX-XXX
315
423A-OOA-DM-DXXX-XXX
315
453A-OOA-DM-DXXX-XXX
315
463A-OOA-DM-DXXX-XXX
315
473A-OOA-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
JB 240/60, 220/50
A 18” (Flying leads)
JA 120/60, 110/50
J Connector
JC 24/60, 24/50
x Other Options
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR (BOTTOM CYLINDER PORTS) **
1 Non-locking
2 Locking
x
Other Options
KA
KD
JB
JD
BA
xx
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
CBM404A-xxxxx-xx
Port size
Pilot air
Spacing 21 mm
w/o flow controls
w/ flow controls
Spacing 26 mm (Rectangular connector)
w/o flow controls
w/ flow controls
1/8” NPTF
1/4” NPTF
Internal
Internal
CBM404A-01AEA-XX
CBM404A-01AED-XX
CBM404A-01BEA-XX
CBM404A-01BED-XX
CBM404A-02AEA-XX
CBM404A-02AED-XX
CBM404A-02BEA-XX
CBM404A-02BED-XX
Number of stations (01, 02, 03, or 04)
** Other options available. Consult factory.
O P T I O N S
413A-OOA-DM-DXXX-XXX
- clic with memory spring (replace by 6).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 400
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Compressed air, vacuum, inert gases
20 - 150 PSI
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories :
Options :
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35069 and seal 16524.
• Blanking plate : M-04002. • Flow control (x2) : N-04001. • Seal : 16525.
• Mounting screw (x2) : 35043. • End plate kit : M-04003-01.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
113.0
100.3
É” 6.5 TYP.
24.5
21.0
15.0
5 1 3
14
12
14
12
14
12
CL
14
12
CL LC
3
1
5
82.0
117.5 DOUBLE
107.9 SINGLE
14.5
32.0
41.0
67.5
99.0
7.0
25.0
19.5
6.5
8.0
1/8" EXTERNAL
PILOT PORT
OPTIONAL
2
2
2
2
27.8
31.5
50.5
40.5
3/8" PORTS
TYP.
4
4
4
4
1/8" PORTS
55.0 21.0
16.0
TYP. 8 PLACES
20.5
38.0
42.0
26.5
C L
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 400
Function Port size (NPTF) Flow (Max) Circuit bar mounting
5/2 - 5/3 1/8” - 1/4” 1.0C v
high profile
cylinder ports
in base
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
xxxx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Pilot air
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
2 4
12 14
2 4
12 14
12 2 4 14
12 2 4 14
12 2 4 14
Internal
315
413A-OOA-DM-DXXX-XXX
315
423A-OOA-DM-DXXX-XXX
315
453A-OOA-DM-DXXX-XXX
315
463A-OOA-DM-DXXX-XXX
315
473A-OOA-DM-DXXX-XXX
External
413A-OOD-DM-DXXX-XXX
423A-OOD-DM-DXXX-XXX
453A-OOD-DM-DXXX-XXX
463A-OOD-DM-DXXX-XXX
473A-OOD-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
JB 240/60, 220/50
A 18” (Flying leads)
JA 120/60, 110/50
J Connector
JC 24/60, 24/50
x Other Options
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR (SIDE CYLINDER PORTS) **
1 Non-locking
2 Locking
x
Other Options
KA
KD
JB
JD
BA
xx
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
CBM405A-xxxxx-xx
Port size
Pilot air
Spacing standard 19,5 mm
Spacing 26 mm
(Rectangular connector)
1/8” NPTF
1/4” NPTF
Internal
Common external
Internal
Common external
CBM405A-00AAA-XX
CBM405A-00BAA-XX
CBM405A-00AAD-XX
CBM405A-00BAD-XX
CBM405A-02AAA-XX
CBM405A-02BAA-XX
CBM405A-02AAD-XX
CBM405A-02BAD-XX
Number of stations (03=3 stations)
** Other options available. Consult factory.
O P T I O N S
413A-OOA-DM-DXXX-XXX
- clic with memory spring (replace by 6).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 400
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories :
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum - 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35069 and seal 16524.
• Blanking plate : M-04002. • Seal : 16525. • Mounting screw (x2) : 35043.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
5 1 3
7,0
C L
4 2
69,5
4 2
25,0
19,5
5 1 3
59,0
32,0
125,0 DOUBLE (45)
96,0 SINGLE (45)
114,3
2
40,0
33,5
22,0
52,0
19,0
4
9,5
3/8" PORTS
1/8” EXTERNAL
PILOT PORT
(OPTIONAL)
72,0
46,0
35,0
20,0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 400
Function Port size (NPTF) Flow (Max) Circuit bar mounting
5/2 - 5/3 1/8” - 1/4” 1.0C v
add on style
cylinder ports
high profile -
in base
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
xxxx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Pilot air
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
2 4
12 14
2 4
12 14
12 2 4 14
12 2 4 14
12 2 4 14
Internal
315
413A-OOA-DM-DXXX-XXX
315
423A-OOA-DM-DXXX-XXX
315
453A-OOA-DM-DXXX-XXX
315
463A-OOA-DM-DXXX-XXX
315
473A-OOA-DM-DXXX-XXX
External
413A-OOD-DM-DXXX-XXX
423A-OOD-DM-DXXX-XXX
453A-OOD-DM-DXXX-XXX
463A-OOD-DM-DXXX-XXX
473A-OOD-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
JB 240/60, 220/50
A 18” (Flying leads)
JA 120/60, 110/50
J Connector
JC 24/60, 24/50
x Other Options
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR (SIDE CYLINDER PORTS) **
1 Non-locking
2 Locking
x
Other Options
KA
KD
JB
JD
BA
xx
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
CBM405A-xxxxx-xx
Port size
Pilot air
Spacing standard 19,5 mm
Spacing 26 mm
(Rectangular connector)
1/8” NPTF
1/4” NPTF
Internal
Common external
Internal
Common external
CBM405A-00ABA-XX
CBM405A-00BCA-XX
CBM405A-00ABD-XX
CBM405A-00BCD-XX
CBM405A-02ABA-XX
CBM405A-02BCA-XX
CBM405A-02ABD-XX
CBM405A-02BCD-XX
Number of stations (03=3 stations)
** Other options available. Consult factory.
Note: add-a-unit stations may be added to above bars.
O P T I O N S
413A-OOA-DM-DXXX-XXX
- clic with memory spring (replace by 6).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 400
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories :
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum - 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35069 and seal 16524.
• Blanking plate : M-04002. • Seal : 16525. • Mounting screw (x2) : 35043.
• End plate kit : M-04005-01. • End plate kit for common external pilot : M-04006-01.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
113.0
114.3
40.0
33.5
19.0
84.0
5 1 3
12
14
12
14
12
14 14
12
3
1
5
118.0 DOUBLE
98.5 SINGLE
20.0
35.0
46.0
72.0
99.0
7.0
1/8" EXTERNAL
PILOT PORT
21.0
21.0
3/8" PORTS
TYP.
OPTIONAL
59.0
10.5
16.0
55.0
9.5
Ø 6.50
TYP 2
16.0
4
2
52.0
20.0
21.0
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 400
Function Port size (NPTF) Flow (Max) Circuit bar mounting
5/2 - 5/3 1/8” - 1/4” 1.0C v
add-a-unit
stations for
CBM405A bar
OPERATIONAL BENEFITS
1. The 4-way pilot develops maximum shifting forces
both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of pressure,
also provides high flow.
4. Short stroke with high flow.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Pilot with balanced poppet, high flow, short and
consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER
xxxx-xxx-DM-Dxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Pilot air
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
2 4
12 14
2 4
12 14
12 2 4 14
12 2 4 14
12 2 4 14
Internal
315
413A-OOA-DM-DXXX-XXX
315
423A-OOA-DM-DXXX-XXX
315
453A-OOA-DM-DXXX-XXX
315
463A-OOA-DM-DXXX-XXX
315
473A-OOA-DM-DXXX-XXX
External
413A-OOD-DM-DXXX-XXX
423A-OOD-DM-DXXX-XXX
453A-OOD-DM-DXXX-XXX
463A-OOD-DM-DXXX-XXX
473A-OOD-DM-DXXX-XXX
SOLENOID OPERATOR ➤
D XX X- X XX *
XX Voltage
X Wire length
X Manual operator
XX
Electrical connection
JB 240/60, 220/50
A 18” (Flying leads)
JA 120/60, 110/50
J Connector
JC 24/60, 24/50
x Other Options
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR (SIDE CYLINDER PORTS) **
1 Non-locking
2 Locking
x
Other Options
KA
KD
JB
JD
BA
xx
Square connector
Square connector
with light
Rectangular connector
Rectangular connector
with light
Flying leads
Other Options
CBM405A-xxxxx-xx
Port size
Pilot air
Spacing 21 mm
Spacing 26 mm
(Rectangular connector)
1/8” NPTF
1/4” NPTF
Internal
Common external
Internal
Common external
CBM405A-01AEA-XX
CBM405A-01BEA-XX
CBM405A-01AED-XX
CBM405A-01BED-XX
CBM405A-02AEA-XX
CBM405A-02BEA-XX
CBM405A-02AED-XX
CBM405A-02BED-XX
Number of stations (01, 02, 03, or 04)
** Other options available. Consult factory.
O P T I O N S
413A-OOA-DM-DXXX-XXX
- clic with memory spring (replace by 6).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 400
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Accessories :
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 - 150 PSI
External pilot : vacuum - 150 PSI
20 - 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 10.9 VA Holding : 7.7 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 7.3 ms De-energize : 5.3ms
60Hz/6 W Energize : 8-12 ms De-energize : 7-11 ms
• Pilot valve : DMB-DXXX-XXX-1, including mounting screws 35069 and seal 16524.
• Blanking plate : M-04002. • Seal : 16525. • Mounting screw (x2) : 35043.
• End plate kit : M-04005-01. • End plate kit for common external pilot : M-04006-01.
• BSPP threads. • Isolation of inlet and/or exhaust.
DIMENSIONS
113.0
114.3
40.0
33.5
19.0
84.0
5 1 3
12
14
12
14
12
14 14
12
3
1
5
118.0 DOUBLE
98.5 SINGLE
20.0
35.0
46.0
72.0
99.0
7.0
1/8" EXTERNAL
PILOT PORT
21.0
21.0
3/8" PORTS
TYP.
OPTIONAL
59.0
10.5
16.0
55.0
9.5
Ø 6.50
TYP 2
16.0
4
2
52.0
20.0
21.0
Consult “Precautions”before use, installation or service of MAC Valves.

Section 2 Options
Consult “Precautions” before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Codification table for voltages / Wire length / Manual operator / Electrical connection
VALVE CODE ➤
D M - D XX X - X XX
1 2 3 4
OPTIONS AVAILABLE FOR
- pilot operated valves 400, 52 & 92 Series
Consult “Precautions”before use, installation or service of MAC Valves.

OPTIONS
Back
1. VOLTAGE
- D XX X - X XX VOLTAGE
DB 12 VDC (5.4 W)
DC 12 VDC (7.5 W)
DD 24 VDC (7.3 W)
DE 12 VDC (12.7 W)
DK 110 VDC (5.8 W)
DJ 28 VDC (5.7 W)
DL 64 VDC (6.0 W)
DM 36 VDC (5.8 W)
DN 6 VDC (6.0 W)
DR 90 VDC (6,6 W)
DS 110 VDC (7.3 W), 100 VDC (6.0 W)
DT 75 VDC (5.6 W)
DP 48 VDC (5.8 W)
FA 12 VDC (1.8 W)
FE 12 VDC (2.4 W)
FF 24 VDC (2.4 W)
JD 100/60, 100/50, 110/60
2. WIRE LENGTH
- D XX X - X XX WIRE LENGTH
B 24”
C 36”
D 48”
E 72”
F 96”
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Back
3. MANUAL OPERATOR
- D XX X - X XX MANUAL OPERATOR
0 No operator
1 Non-locking recessed
2 Locking recessed
3 Non-locking extended
4 Locking extended
4. ELECTRICAL CONNECTION
- D XX X - X XX ELECTRICAL CONNECTION
BA Flying leads
BK BA with protection diode
BL BA with protection varistor
CA 1/2" NPS conduit
JB Rectangular connector
JD Rectangular connector with light
JM Rectangular connector, male only
KA Square connector
KB Square connector with protection diode
KC Square connector with protection varistor
KD Square connector with light
KE Square connector with light and protection diode
KF Square connector with light and protection varistor
KJ Square connector (male only)
KK Square connector with protection diode (male only)
KL Square connector with protection varistor (male only)
TA Dual tabs
TB TA with protection diode
TD TA with light
TE TA with light and protection diode
TJ Dual tabs (male only)
TK TJ with protection diode
TM TJ with light
TN TJ with light and protection diode
*DN Plug-in with diode
*DP Plug-in with M.O.V.
*DH Plug-in with diode & ground
*DJ Plug-in with M.O.V & ground
* These options only apply to the 92 series. All others are for the 400 and 52 series.
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
PIN #6
PIN #9
MOD. SD09
PIN #1
PIN #5
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 9
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 7 max.
• Max. 24 V=/5.4 W per solenoid
• 2 common wires
PIN #9
PIN #15
MOD. SD15
PIN #1
PIN #8
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 15
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 12 max.
• Max. 24 V=/5.4 W per solenoid
• 3 common wires
PIN #14
PIN #25
MOD. SD25
PIN #1
PIN #13
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 25
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 20 max.
• Max. 24 V=/5.4 W per solenoid
• 5 common wires
Note : Use desired MOD. number after circuit bar part number

O p t i o n s
OPTIONS
Connector termination details
CONNECTOR
SOL 1
SOL 2 SOL 3 SOL .. SOL 20 SOL 21 SOL 22 SOL 23 SOL 24
Single solenoid circuit bar
SOL 2 SOL 4 SOL 6 SOL 8 SOL 16 SOL 18 SOL 20 SOL 22 SOL 24
CONNECTOR
SOL 1 SOL 3 SOL 5 SOL 13 SOL 15 SOL 17 SOL 19 SOL 21 SOL 23
Double solenoid circuit bar
SD09 SD15 SD25
1
SOL. 1
1
SOL. 1
1
SOL. 1
2
SOL. 2
2
SOL. 2
2
SOL. 2
3
SOL. 3
3
SOL. 3
3
SOL. 3
4
SOL. 4
4
SOL. 4
4
SOL. 4
8
COMMON (+)
13
COMMON (+)
21
COMMON (+)
5
SOL. 5
5
SOL. 5
5
SOL. 5
6
SOL. 6
6
SOL. 6
6
SOL. 6
7
SOL. 7
7
SOL. 7
7
SOL. 7
9
COMMON (+)
8
SOL. 8
8
SOL. 8
14
COMMON (+)
22
COMMON (+)
9
SOL. 9
9
SOL. 9
10 SOL. 10
10 SOL. 10
11
SOL. 11
11
SOL. 11
12 SOL. 12
12 SOL. 12
15
COMMON (+)
23
COMMON (+)
13
SOL. 13
14 SOL. 14
15
SOL. 15
16 SOL. 16
24
COMMON (+)
17
18 SOL. 18
19
20 SOL. 20
SOL. 17
SOL. 19
25
COMMON (+)

Direct solenoid and solenoid pilot operated valves
Series 92
Circuit bar mounting
standard
add-on style
add-a-unit
stations
for CBM092B
Optional light
Plug-in solenoid
Manual operator
Solenoid
Bonded spool
Air return
EXH.
B
IN.
A
EXH.
EXH.
IN.
4-way pilot with balanced poppet
SERIES FEATURES
• Patented MACSOLENOID ® for fastest possible response times
and virtually burn-out proof AC solenoid operation.
• Optional low watt DC solenoids.
• Optional memory spring.
• Plug-in design of valves and bases for ease of maintenance.
• 2 position or 3 position valve configurations.
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves with multi-pin connector
Series 92
Function Port size Flow (Max) Circuit bar mounting
5/2 - 5/3 - 3/2 1/8 - 1/4 - 3/8 1.0C v standard
OPERATIONAL BENEFITS
1. The 4--way pilot develops maximum shifting
forces both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of
pressure, also provides high flow.
4. Short stroke with high flow.
5. Bonded seal spool with minimum friction,
shifting in a glass-like finished bore.
6. Pilot with balanced poppet, high flow, short
and consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
SINGLE PRESSURE MODELS
92B-xxx-000-DM-DxxP-xxx
Port size
(see circuit bar)
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
Valve less base
92B-AAA-000-DM-DXXP-XXX
92B-BAA-000-DM-DXXP-XXX
92B-EAA-000-DM-DXXP-XXX
92B-FAA-000-DM-DXXP-XXX
92B-GAA-000-DM-DXXP-XXX
DUAL PRESSURE MODELS (REQUIRES SANDWICH PRESSURE REGULATOR)
Port size
(see circuit bar)
5/2
Single operator
5/2
Double operator
Valve less base
92B-CAA-000-DM-DXXP-XXX
92B-DAA-000-DM-DXXP-XXX
SOLENOID OPERATOR ➤
DM-DXX P- X XX *
XX
Voltage
X
Manual operator
XX
Electrical connection
JB 240/60, 220/50
JA 120/60, 110/50
JC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR
1 Non-locking
2 Locking
xx Other Options
DM
DG
Plug-in
Plug-in w/ground
Note : Ground wire required for solenoids 30 volts
and above.
xx Other Options
CBM092B-01xxx-AOxx
Port size
Pilot air
Side cylinder ports
(25 mm)
Bottom cylinder ports
(25 mm)
1/8 NPTF
Internal
CBM092B-01AAA-A0*XX
CBM092B-01BAA-A0*XX
Common external
CBM092B-01CAA-A0*XX
CBM092B-01DAA-A0*XX
1/4 NPTF
Internal
CBM092B-01AAD-A0*XX
CBM092B-01BAD-A0*XX
Common external
CBM092B-01CAD-A0*XX
CBM092B-01DAD-A0*XX
3/8 NPTF
Internal
CBM092B-01AAG-A0*XX
CBM092B-01BAG-A0*XX
Common external
CBM092B-01CAG-A0*XX
CBM092B-01DAG-A0*XX
Number of stations (03=3 stations)
* If replaced by BO : circuit bar for single operator valves only.
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
for multi-pin connector (9, 15 or 25).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 92
O P T I O N S
Sandwich flow controls available, consult factory.
92B-AAA-000-DM-DXXP-1DM
T E C H N I C A L
D A T A
For lights on valve, replace by B.
For lights and diode on valve, replace by F.
For lights and MOV on valve, replace by H.
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Compressed air, vacuum, inert gases
Internal pilot : 20 to 120 PSI
3 positions : 35 to 120 PSI
External pilot : vacuum to 120 PSI
3 positions : 35 to 120 PSI
20 to 120 PSI 3 positions : 35 to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 7.6 VA Holding : 4.8 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 8 ms De-energize : 7 ms
60Hz/2.9 W Energize : 7-13 ms De-energize : 12-20 ms
• Pilot valve : DMB-DXXP-XXX-1 including mounting screws 35069 (x2) and seal 16544.
• Pressure seal between valve and base : 16543. • Mounting screws valve to base (x2) : 35050. • Blanking plate : M-92002.
Options :
• BSPP threads. • Isolation of inlet and/or exhaust. • Circuit bar for number of stations > 24.
DIMENSIONS
C
34.0 D
118.7
B 25.0
TYP.
A 25.0
18.4
TYP.
B B B EXT.P
A A A
A
B
1/8",1/4",3/8",PORTS
AVAILABE ON SIDE
OR BOTTOM
164.3
APROX.
W/DOUBLE
SIOLENOID
148.3
APROX.
W/ SINGLE
SOLENOID
MODEL
A
B
MODEL
A
B
MODEL
A
B
MODEL
A
7.0
TYP.
B
5.5
TYP.
81.5
TYP.
1/8" PORTS EXTERNAL
PILOT PORT 3 PLACES
52.0
42.0
36.5
25.5
21.5
EXT.P
EA
IN
EB
25.5
3/8" PORTS
3 PLACES
BOTH ENDS
27.0
51.2
73.1
115.5
B
COND.
25.0 G
TYP.
1 1/4" N.P.S.M.
CONDUIT BOTH
ENDS
25.6
6.3 DIA. MT'G
HOLES 4 PLACES
B
A
B
A
A
B
A
B
40.4
F
Number of
stations
“H”
1
60.0
2
85.0
3
4
5
6
110.0 135.0 160.0 185.0 210.0 235.0 260.0 285.0
7
8
9
10
Dim.
“A”
“B”
“C”
“D”
1/8”
30.0
39.0
10.0
33.0
1/4”
30.0
39.0
10.0
33.0
3/8”
32.5
36.5
11.0
34.0
25.0 E
TYP.
H
Dimensions are based on 25 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
“E”
“F”
“G”
40.9
61.1
30.1
36.9
61.1
30.9
35.5
62.6
30.7
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves with multi-pin connector
Series 92
Function Port size Flow (Max) Circuit bar mounting
5/2 - 5/3 - 3/2 1/8 - 1/4 - 3/8 1.0C v add-on style
OPERATIONAL BENEFITS
1. The 4--way pilot develops maximum shifting
forces both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of
pressure, also provides high flow.
4. Short stroke with high flow.
5. Bonded seal spool with minimum friction,
shifting in a glass-like finished bore.
6. Pilot with balanced poppet, high flow, short
and consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
SINGLE PRESSURE MODELS
92B-xxx-000-DM-DxxP-xxx
Port size
(see circuit bar)
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
Valve less base
92B-AAA-000-DM-DXXP-XXX
92B-BAA-000-DM-DXXP-XXX
92B-EAA-000-DM-DXXP-XXX
92B-FAA-000-DM-DXXP-XXX
92B-GAA-000-DM-DXXP-XXX
DUAL PRESSURE MODELS (REQUIRES SANDWICH PRESSURE REGULATOR)
Port size
(see circuit bar)
5/2
Single operator
5/2
Double operator
Valve less base
92B-CAA-000-DM-DXXP-XXX
92B-DAA-000-DM-DXXP-XXX
SOLENOID OPERATOR ➤
DM-DXX P- X XX *
XX
Voltage
X
Manual operator
XX
Electrical connection
JB 240/60, 220/50
JA 120/60, 110/50
JC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR
1 Non-locking
2 Locking
xx Other Options
DM
DG
Plug-in
Plug-in w/ground
Note : Ground wire required for solenoids 30 volts
and above.
xx Other Options
CBM092B-01xxx-AOxx
Port size
Pilot air
Side cylinder ports
(25 mm)
Bottom cylinder ports
(25 mm)
1/8 NPTF
Internal
CBM092B-01ABA-A0*XX
CBM092B-01BBA-A0*XX
Common external
CBM092B-01CBA-A0*XX
CBM092B-01DBA-A0*XX
1/4 NPTF
Internal
CBM092B-01ABD-A0*XX
CBM092B-01BBD-A0*XX
Common external
CBM092B-01CBD-A0*XX
CBM092B-01DBD-A0*XX
3/8 NPTF
Internal
CBM092B-01ABG-A0*XX
CBM092B-01BBG-A0*XX
Common external
CBM092B-01CBG-A0*XX
CBM092B-01DBG-A0*XX
* If replaced by BO : circuit bar for single operator valves only.
Number of stations (03=3 stations)
Note : add-a-unit stations may be added to above bars. See
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
page for model numbers
for multi-pin connector (9, 15 or 25).
Consult “Precautions”before use, installation or service of MAC Valves.

A
B
A
B
A
B
A
B
GAGE
EA
IN
EB
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 92
O P T I O N S
Sandwich flow controls available, consult factory.
92B-AAA-000-DM-DXXP-1DM
For lights on valve, replace by B.
For lights and diode on valve, replace by F.
For lights and MOV on valve, replace by H.
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Options :
Compressed air, vacuum, inert gases
Internal pilot : 20 to 120 PSI
3 positions : 35 to 120 PSI
External pilot : vacuum to 120 PSI
3 positions : 35 to 120 PSI
20 to 120 PSI 3 positions : 35 to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 7.6 VA Holding : 4.8 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 8 ms De-energize : 7 ms
60Hz/2.9 W Energize : 7-13 ms De-energize : 12-20 ms
• Pilot valve : DMB-DXXP-XXX-1 including mounting screws 35069 (x2) and seal 16544.
• Pressure seal between valve and base : 16543. • Mounting screws valve to base (x2) : 35050. • Blanking plate : M-92002.
• End plate kit : M-92001-01 • Isolator disc between add-a-units : 28413.
• BSPP threads. • Isolation of inlet and/or exhaust. • Circuit bar for number of stations > 24.
DIMENSIONS
EA
EB IN
164.0
APPROX.
W/SINGLE
REGULATOR
192.3
APPROX.
SINGLE REG.
W/ DOUBLE
REGULATOR
241.0
APPROX.
W/DOUBLE
REGULATOR
34.0
137.0 118.7
APPROX.
W/ FLOW
CONTROLS
D
B
A
18.4
C
A
EXT.P
25.0
TYP.
25.0
TYP.
B
A
B
A
B
A
15.0
B
60.5
APPROX.
FROM C L OF
FLOW CONTROL
1/8",1/4",3/8",
PORTS AVAILABE ON
SIDE OR BOTTOM
70.0
APPROX.
FROM C L OF
REGULATOR
Number of
stations
“H”
1
63.0
2
3
Dimensions are based on 25 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
4
5
6
88.0 113.0 138.0 163.0 188.0 213.0 238.0 263.0 288.0
7
8
9
10
MODEL
157.5
APPROX.
W/ REGULATOR
25.0
7.0
TYP.
E
G
25.0
TYP.
25.0
TYP.
1/8" EXTERNAL PILOT
PORT 3 PLACES
52.0
42.0
36.5
25.5
21.5
27.0
162.6
APPROX.
W/DOUBLE
SOLENOID
148.3
APPROX.
W/ SINGLE
SOLENOID
5.5
TYP.
81.5
TYP.
F
40.4
A
B
A
B
A
B
A
B
MODIF.
EXT.P
COND
25.5
51.2
73.1
3/8" PORTS
3 HOLES
BOTH ENDS
115.5
Dim.
“A”
“B”
“C”
“D”
1/8”
32.0
39.0
10.0
33.4
1/4”
32.0
39.0
10.0
33.4
3/8”
34.5
36.5
11.0
33.0
6.3 DIA.MT'G
HOLE 4 PLACES
73.0
2-STATION
ADD-ON BAR
H
25.0
TYP.
ADD
A-UNIT
25.6
1 1/4" N.P.S.M.
CONDUIT BOTH
ENDS
“E”
“F”
“G”
40.9
61.1
30.1
37.9
61.1
31.9
36.5
62.6
34.5
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves with multi-pin connector
Series 92
Function Port size Flow (Max) Circuit bar mounting
5/2 - 5/3 - 3/2 1/8 - 1/4 - 3/8 1.0C v
add-a-unit
stations
for CBM092B
OPERATIONAL BENEFITS
1. The 4--way pilot develops maximum shifting
forces both ways.
2. Memory spring available.
3. Balanced spool, immune to variations of
pressure, also provides high flow.
4. Short stroke with high flow.
5. Bonded seal spool with minimum friction,
shifting in a glass-like finished bore.
6. Pilot with balanced poppet, high flow, short
and consistent response times.
7. Wiping effect eliminates sticking.
8. Long service life.
Reset
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
SINGLE PRESSURE MODELS
92B-xxx-000-DM-DxxP-xxx
Port size
(see circuit bar)
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
Valve less base
92B-AAA-000-DM-DXXP-XXX
92B-BAA-000-DM-DXXP-XXX
92B-EAA-000-DM-DXXP-XXX
92B-FAA-000-DM-DXXP-XXX
92B-GAA-000-DM-DXXP-XXX
DUAL PRESSURE MODELS (REQUIRES SANDWICH PRESSURE REGULATOR)
Port size
(see circuit bar)
5/2
Single operator
5/2
Double operator
Valve less base
92B-CAA-000-DM-DXXP-XXX
92B-DAA-000-DM-DXXP-XXX
SOLENOID OPERATOR ➤
DM-DXX P- X XX *
XX
Voltage
X
Manual operator
XX
Electrical connection
JB 240/60, 220/50
JA 120/60, 110/50
JC 24/60, 24/50
FB 24VDC (1.8 W)
DA 24VDC (5.4 W)
DF 24VDC (12.7 W)
xx Other Options
HOW TO ORDER CIRCUIT BAR
Port size
1/8 NPTF
1/4 NPTF
3/8 NPTF
1 Non-locking
2 Locking
xx Other Options
Side cylinder ports
(25 mm)
CBM092B-01ACA-A0*XX
CBM092B-01ACD-A0*XX
CBM092B-01ACG-A0*XX
DM
DG
Plug-in
Plug-in w/ground
Note : Ground wire required for solenoids 30 volts
and above.
xx Other Options
CBM092B-01xxx-AOxx
Bottom cylinder ports
(25 mm)
CBM092B-01BCA-A0*XX
CBM092B-01BCD-A0*XX
CBM092B-01BCG-A0*XX
Number of stations (01=1 stations). Available in one (1) or two (2) station lenghts.
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
when add-a-units are added to bars with a multi-pin connector, MOD SD03 should be
included with add-a-unit model number.
* If replaced by BO : circuit bar for single operator valves only.
Consult “Precautions”before use, installation or service of MAC Valves.

A
B
A
B
A
B
A
B
GAGE
EA
IN
EB
100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 92
O P T I O N S
Sandwich flow controls available, consult factory.
92B-AAA-000-DM-DXXP-1DM
T E C H N I C A L
D A T A
For lights on valve, replace by B.
For lights and diode on valve, replace by F.
For lights and MOV on valve, replace by H.
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Compressed air, vacuum, inert gases
Internal pilot : 20 to 120 PSI
3 positions : 35 to 120 PSI
External pilot : vacuum to 120 PSI
3 positions : 35 to 120 PSI
20 to 120 PSI 3 positions : 35 to 120 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
6.2 mm
1.0 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 7.6 VA Holding : 4.8 VA
= 1.8 to 12.7 W
24 V=/5.4 W Energize : 8 ms De-energize : 7 ms
60Hz/2.9 W Energize : 7-13 ms De-energize : 12-20 ms
• Pilot valve : DMB-DXXP-XXX-1 including mounting screws 35069 (x2) and seal 16544.
• Pressure seal between valve and base : 16543. • Mounting screws valve to base (x2) : 35050. • Blanking plate : M-92002.
Options :
• BSPP threads. • Isolation of inlet and/or exhaust. • Circuit bar for number of stations > 24.
DIMENSIONS
EA
EB IN
164.0
APPROX.
W/SINGLE
REGULATOR
192.3
APPROX.
SINGLE REG.
W/ DOUBLE
REGULATOR
241.0
APPROX.
W/DOUBLE
REGULATOR
34.0
137.0 118.7
APPROX.
W/ FLOW
CONTROLS
D
B
A
18.4
C
A
EXT.P
25.0
TYP.
25.0
TYP.
B
A
B
A
B
A
15.0
B
60.5
APPROX.
FROM C L OF
FLOW CONTROL
1/8",1/4",3/8",
PORTS AVAILABE ON
SIDE OR BOTTOM
70.0
APPROX.
FROM C L OF
REGULATOR
Number of
stations
“H”
1
63.0
2
3
Dimensions are based on 25 mm centerline spacing
Note: Bottom & side cylinder ports not available on the same station
4
5
6
88.0 113.0 138.0 163.0 188.0 213.0 238.0 263.0 288.0
7
8
9
10
MODEL
157.5
APPROX.
W/ REGULATOR
25.0
7.0
TYP.
E
G
25.0
TYP.
25.0
TYP.
1/8" EXTERNAL PILOT
PORT 3 PLACES
52.0
42.0
36.5
25.5
21.5
27.0
162.6
APPROX.
W/DOUBLE
SOLENOID
148.3
APPROX.
W/ SINGLE
SOLENOID
5.5
TYP.
81.5
TYP.
F
40.4
A
B
A
B
A
B
A
B
MODIF.
EXT.P
COND
25.5
51.2
73.1
3/8" PORTS
3 HOLES
BOTH ENDS
115.5
Dim.
“A”
“B”
“C”
“D”
1/8”
32.0
39.0
10.0
33.4
1/4”
32.0
39.0
10.0
33.4
3/8”
34.5
36.5
11.0
33.0
6.3 DIA.MT'G
HOLE 4 PLACES
73.0
2-STATION
ADD-ON BAR
H
25.0
TYP.
ADD
A-UNIT
25.6
1 1/4" N.P.S.M.
CONDUIT BOTH
ENDS
“E”
“F”
“G”
40.9
61.1
30.1
37.9
61.1
31.9
36.5
62.6
34.5
Consult “Precautions”before use, installation or service of MAC Valves.

Section 2 Options
Consult “Precautions” before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Codification table for voltages / Wire length / Manual operator / Electrical connection
VALVE CODE ➤
D M - D XX X - X XX
1 2 3 4
OPTIONS AVAILABLE FOR
- pilot operated valves 400, 52 & 92 Series
Consult “Precautions”before use, installation or service of MAC Valves.

OPTIONS
Back
1. VOLTAGE
- D XX X - X XX VOLTAGE
DB 12 VDC (5.4 W)
DC 12 VDC (7.5 W)
DD 24 VDC (7.3 W)
DE 12 VDC (12.7 W)
DK 110 VDC (5.8 W)
DJ 28 VDC (5.7 W)
DL 64 VDC (6.0 W)
DM 36 VDC (5.8 W)
DN 6 VDC (6.0 W)
DR 90 VDC (6,6 W)
DS 110 VDC (7.3 W), 100 VDC (6.0 W)
DT 75 VDC (5.6 W)
DP 48 VDC (5.8 W)
FA 12 VDC (1.8 W)
FE 12 VDC (2.4 W)
FF 24 VDC (2.4 W)
JD 100/60, 100/50, 110/60
2. WIRE LENGTH
- D XX X - X XX WIRE LENGTH
B 24”
C 36”
D 48”
E 72”
F 96”
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Back
3. MANUAL OPERATOR
- D XX X - X XX MANUAL OPERATOR
0 No operator
1 Non-locking recessed
2 Locking recessed
3 Non-locking extended
4 Locking extended
4. ELECTRICAL CONNECTION
- D XX X - X XX ELECTRICAL CONNECTION
BA Flying leads
BK BA with protection diode
BL BA with protection varistor
CA 1/2" NPS conduit
JB Rectangular connector
JD Rectangular connector with light
JM Rectangular connector, male only
KA Square connector
KB Square connector with protection diode
KC Square connector with protection varistor
KD Square connector with light
KE Square connector with light and protection diode
KF Square connector with light and protection varistor
KJ Square connector (male only)
KK Square connector with protection diode (male only)
KL Square connector with protection varistor (male only)
TA Dual tabs
TB TA with protection diode
TD TA with light
TE TA with light and protection diode
TJ Dual tabs (male only)
TK TJ with protection diode
TM TJ with light
TN TJ with light and protection diode
*DN Plug-in with diode
*DP Plug-in with M.O.V.
*DH Plug-in with diode & ground
*DJ Plug-in with M.O.V & ground
* These options only apply to the 92 series. All others are for the 400 and 52 series.
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
PIN #6
PIN #9
MOD. SD09
PIN #1
PIN #5
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 9
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 7 max.
• Max. 24 V=/5.4 W per solenoid
• 2 common wires
PIN #9
PIN #15
MOD. SD15
PIN #1
PIN #8
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 15
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 12 max.
• Max. 24 V=/5.4 W per solenoid
• 3 common wires
PIN #14
PIN #25
MOD. SD25
PIN #1
PIN #13
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 25
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 20 max.
• Max. 24 V=/5.4 W per solenoid
• 5 common wires
Note : Use desired MOD. number after circuit bar part number

O p t i o n s
OPTIONS
Connector termination details
CONNECTOR
SOL 1
SOL 2 SOL 3 SOL .. SOL 20 SOL 21 SOL 22 SOL 23 SOL 24
Single solenoid circuit bar
SOL 2 SOL 4 SOL 6 SOL 8 SOL 16 SOL 18 SOL 20 SOL 22 SOL 24
CONNECTOR
SOL 1 SOL 3 SOL 5 SOL 13 SOL 15 SOL 17 SOL 19 SOL 21 SOL 23
Double solenoid circuit bar
SD09 SD15 SD25
1
SOL. 1
1
SOL. 1
1
SOL. 1
2
SOL. 2
2
SOL. 2
2
SOL. 2
3
SOL. 3
3
SOL. 3
3
SOL. 3
4
SOL. 4
4
SOL. 4
4
SOL. 4
8
COMMON (+)
13
COMMON (+)
21
COMMON (+)
5
SOL. 5
5
SOL. 5
5
SOL. 5
6
SOL. 6
6
SOL. 6
6
SOL. 6
7
SOL. 7
7
SOL. 7
7
SOL. 7
9
COMMON (+)
8
SOL. 8
8
SOL. 8
14
COMMON (+)
22
COMMON (+)
9
SOL. 9
9
SOL. 9
10 SOL. 10
10 SOL. 10
11
SOL. 11
11
SOL. 11
12 SOL. 12
12 SOL. 12
15
COMMON (+)
23
COMMON (+)
13
SOL. 13
14 SOL. 14
15
SOL. 15
16 SOL. 16
24
COMMON (+)
17
18 SOL. 18
19
20 SOL. 20
SOL. 17
SOL. 19
25
COMMON (+)

Direct solenoid and solenoid pilot operated valves
Series 800
Circuit bar mounting
cylinder ports
in valve
with shut-off
valve
Sealed solenoid enclosure
Piston assembly
Manual operator
Piston adapter
Bonded spool
2
3
Air/spring return
4 1 5
Internal pilot supply
Optional pilot exhaust
tapped port or
Integral muffler
SERIES FEATURES
• Patented MACSOLENOID ® with its non-burn out feature on AC service.
• Air/spring return on single solenoid valves.
• Use for lube or non-lube service.
• Optional low wattage DC solenoids down to 1 watt.
• Various types of manual operators and solenoid enclosures.
• 2 position or 3 position valve configurations.
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 800
Function Port size Flow (Max) Circuit bar mounting
5/2 - 5/3 1/4” 1.3C v
cylinder ports
in valve
OPERATIONAL BENEFITS
1. Balanced spool, immune to variations of pressure.
2. Short stroke with high flow.
3. The piston (booster) provides maximum shifting
forces.
4. Powerful return force thanks to the combination of
mechanical and air springs.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Wiping effect eliminates sticking.
7. Pilot valve with balanced poppet, high flow, short
and consistent response times.
8. Long service life.
Reset
HOW TO ORDER
xxxx-PM-xxxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
A 3 2 B
A 3 2 B
B 2 3 A
B 2 3 A
B 2 3 A
5 1
4
5 1
4
4 1 5
4 1 5
4 1 5
1/4” NPTF
811C-PM-XXYZZ-172
821C-PM-XXYZZ-172
825C-PM-XXYZZ-572
825C-PM-XXYZZ-672
825C-PM-XXYZZ-872
SOLENOID OPERATOR ➤
XX Y ZZ *
Voltage
11 120/60, 110/50
12 240/60, 220/50
22 24/50, 24/60
59 24VDC (2.5 W)
87 24VDC (17.1 W)
61 24VDC (8.5 W)
xx Other Options
Manual operator
1 Non-locking
2 Locking
xx Other Options
Electrical connection
JB Rectangular connector
JD Rectangular connector
with light
BA Flying leads (18”)
xx Other Options
HOW TO ORDER CIRCUIT BAR**
Port size
(Spacing 31 mm)
3/8” NPTF
Standard circuit bar
EBM800A-001A-XX
EBM800A-xxxx-xx
Circuit bar with flow controls
(2 per station)
EBM800A-002A-XX
Number of stations (03=3 stations)
Other options available. Consult factory.
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 800
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Compressed air, vacuum, inert gases
Internal pilot : single operator and 3 positions : 20 to 150 PSI
double operator : 10 to 150 PSI
External pilot : vacuum to 200 PSI
Single operator and 3 positions : 20 to 150 PSI
Double operator : 20 to 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
7 mm
1/4" : 1.3 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 14.8 VA Holding : 10.9 VA
= 1 to 17.1 W
24 V=/8.5 W Energize : 8 ms De-energize : 10ms
60Hz/6 W Energize : 5-11 ms De-energize : 9-16 ms
• Pilot valve : PME-XXYZZ. • Mounting screw pilot to main valve : 34364. • Blanking plate : M-08008.
• Mounting screw valve to bar (x2): 35249. • Flow control : N08006.
Options :
• BSPP threads. • Isolation of inlet and/or exhaust. • Explosion-proof model.
DIMENSIONS
183,2
136,0
91,5
56,0
89,2
IN
18,5
EXH
EXH
15,5
7,0
EX IN EX
3
4
3
4
3
4
3
15,0 12,7
15,0 12,7
4
3
4
3
4
EX IN EX
Ø 6,7
2 MTG HOLES
12,0
42,0
72,0
84,0
FLOW CONTROL
3/8”
7,0
31,0
31,5
Consult “Precautions”before use, installation or service of MAC Valves.

Direct solenoid and solenoid pilot operated valves
Series 800
Function Port size Flow (Max) Circuit bar mounting
5/2 - 5/3 1/4” 1.3C v
with shut-off
valve
OPERATIONAL BENEFITS
1. Balanced spool, immune to variations of pressure.
2. Short stroke with high flow.
3. The piston (booster) provides maximum shifting
forces.
4. Powerful return force thanks to the combination of
mechanical and air springs.
5. Bonded spool with minimum friction, shifting in a
glass-like finished bore.
6. Wiping effect eliminates sticking.
7. Pilot valve with balanced poppet, high flow, short
and consistent response times.
8. Long service life.
Reset
HOW TO ORDER
xxxx-PM-xxxxx-xxx
HOW TO ORDER VALVE FOR CIRCUIT BAR MOUNTING
Port size
5/2
Single operator
5/2
Double operator
5/3
Closed center
5/3
Open center
5/3
Pressure center
A 3 2 B
A 3 2 B
B 2 3 A
B 2 3 A
B 2 3 A
5 1
4
5 1
4
4 1 5
4 1 5
4 1 5
1/4” NPTF
811C-PM-XXYZZ-172
821C-PM-XXYZZ-172
825C-PM-XXYZZ-572
825C-PM-XXYZZ-672
825C-PM-XXYZZ-872
SOLENOID OPERATOR ➤
XX Y ZZ *
Voltage
11 120/60, 110/50
12 240/60, 220/50
22 24/50, 24/60
59 24VDC (2.5 W)
87 24VDC (17.1 W)
61 24VDC (8.5 W)
xx Other Options
Manual operator
1 Non-locking
2 Locking
xx Other Options
Electrical connection
JB Rectangular connector
JD Rectangular connector
with light
BA Flying leads (18”)
xx Other Options
HOW TO ORDER CIRCUIT BAR**
Port size
(Spacing 31 mm)
w/o inlet shut-off valve
EBI800A-xxxx-xx
w/ inlet shut-off valve
3/8" NPTF
EBI800A-001A-XX
EBI800A-002A-XX
Number of stations (03=3 stations)
Other options available. Consult factory.
Note : clic for valves mounted on base at the factory (add - 9 to the model number).
Consult “Precautions”before use, installation or service of MAC Valves.

100%
100%
WARRANTY
18
O F
P R O D U C T I O N
T E S T E D
100% MONTHS
Series 800
T E C H N I C A L
D A T A
Fluid :
Pressure range :
Pilot pressure :
Lubrication :
Filtration :
Temperature range :
Orifice :
Flow (at 6 bar, P=1bar) :
Leak rate :
Coil :
Voltage range :
Protection :
Power :
Response times :
Spare parts :
Compressed air, vacuum, inert gases
Internal pilot : single operator and 3 positions : 20 to 150 PSI
double operator : 10 to 150 PSI
External pilot : vacuum to 200 PSI
Single operator and 3 positions : 20 to 150 PSI
Double operator : 20 to 150 PSI
Not required, if used select a medium aniline point lubricant (between 180°F to 210°F)
40 μ
0°F to 120°F (-18°C to +50°C)
7 mm
1/4" : 1.3 C v
50 cm 3 /min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
NEMA 4
Inrush : 14.8 VA Holding : 10.9 VA
= 1 to 17.1 W
24 V=/8.5 W Energize : 8 ms De-energize : 10ms
60Hz/6 W Energize : 5-11 ms De-energize : 9-16 ms
• Pilot valve : PME-XXYZZ. • Mounting screw pilot to main valve : 34364. • Blanking plate : M-08011.
• Shut-off valve : M-08010. • Mounting screw valve to bar (x2): 35249.
Options :
• BSPP threads. • Isolation of inlet and/or exhaust. • Explosion-proof model.
DIMENSIONS
183,2
91,6
56,0
19,0
K
C
O
L
3
2
K
C
O
L
102,2
L
K
L
O
C
O
O
K
C
L
K
C
3
3
3
2
2
2
L
K
L
O
C
O
K
C
O
L
K
C
13,0
SHOWN IN OPEN
POSITION
3/8”
Ø 4
MTG. HOLES
9,5
19,0
26,0
13,0
19,0
SHOWN IN
CLOSED POSITION
EXH
40,0
111,0
71,0
Consult “Precautions”before use, installation or service of MAC Valves.

Section 2 Options
Consult “Precautions” before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Codification table for voltages / Manual operator / Electrical connection / Wire length
VALVE CODE ➤
- XX Y ZZ (-VV)
1 2 3 4
OPTIONS AVAILABLE FOR
- valves type 800 Series
Consult “Precautions”before use, installation or service of MAC Valves.

OPTIONS
Back
1. VOLTAGE
- XX Y ZZ VOLTAGE
11 120/60 - 110/50
12 240/60 - 220/50
13 100/60 - 100/50
15 200/60 - 200 V~/50 Hz
16 10/60
20 6/60
21 12/50 - 12/60
22 24/60 - 24/50
23 32/60 - 32/50
24 48/60 - 42/50
26 380/50, 440/50 -440/60,
480/60-CLSF
29 200/60
34 127/50 - 120/50
35 48/50
36 16/60
B1 24/50
50 24 VDC (6W)
51 24 VDC (4W)
54 12 VDC (4W)
55 12 VDC (6W)
57 12 VDC (2.5W)
59 24 VDC (2.5W)
60 12 VDC (8.5W)
61 24 VDC (8.5W)
64 6 VDC (6W)
65 32 VDC (7W)
66 48 VDC (5.8W)
67 64 VDC (7.5W)
68 120 VDC (6.4W)
75 90 VDC (8.8W)
76 100 VDC (6.9W)
*84 125 VDC (10.9W)
*87 24 VDC (17.1W)
*88 12 VDC (17.4W)
*89 36 VDC (18.8W)
90 28 VDC (8.2W)
*91 6 VDC (10.6W)
92 190 VDC (6.5W)
94 3 VDC (7W)
95 38 VDC (6.4W)
A1
24 VDC (1.0W)
A2
12 VDC (1.0W)
A3
9 VDC (1.0W)
MOD. DD01 : Protection diode (DC)
MOD. MOV1 : Protection varistor (AC)
MOD. DD01 : max. 8,5 W
MOD. MOV1 : max. 8,5 W
* Voltages are CLSF only
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
Back
2. MANUAL OPERATOR
- XX Y ZZ MANUAL OPERATOR
0 No operator
1 Non-locking recessed
2 Locking recessed
3 Non-locking extended
4 Locking extended
3. ELECTRICAL CONNECTION
- XX Y ZZ ELECTRICAL CONNECTION
AA Wiring box with 1/2" NPS conduit
BA Flying leads
CA 1/2" NPS conduit
CC 1/2" NPT conduit
FA Military type 2 PIN
GA Military type 3 PIN
HA AA with ground wire
JA Square connector
JB Rectangular connector
JC Square connector with light
JD Rectangular connector with light
JJ Square connector, male only
JM Rectangular connector, male only
NA CA with ground wire
NC CC with ground wire
RA 3/8" NPS conduit
CD 20 mm conduit
4. WIRE LENGTH
- XX Y ZZ (-VV) WIRE LENGTH
AA 18”
AB 24”
AD 36”
AE 48”
AF 72”
AG 6”
AR 12”
AU 120”
BA 60”
BB 144”
Consult “Precautions”before use, installation or service of MAC Valves.

O p t i o n s
OPTIONS
PIN #6
PIN #9
MOD. SD09
PIN #1
PIN #5
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 9
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 7 max.
• Max. 24 V=/5.4 W per solenoid
• 2 common wires
PIN #9
PIN #15
MOD. SD15
PIN #1
PIN #8
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 15
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 12 max.
• Max. 24 V=/5.4 W per solenoid
• 3 common wires
PIN #14
PIN #25
MOD. SD25
PIN #1
PIN #13
TECHNICAL DATA
• Type «SUB_D»
• Number of contacts : 25
• Solder termination (Dia. 0.6 mm/0.14 mm 2 /26-22 AWG)
• Operating current 5 A/contact
• Rated voltage 125 V~
• Temp. range –40° to +125°C
• Insulation resistance 5.0 9
• Protection class IP40 (DIN 40050)
• Number of solenoids : 20 max.
• Max. 24 V=/5.4 W per solenoid
• 5 common wires
Note : Use desired MOD. number after circuit bar part number

O p t i o n s
OPTIONS
Connector termination details
CONNECTOR
SOL 1
SOL 2 SOL 3 SOL .. SOL 20 SOL 21 SOL 22 SOL 23 SOL 24
Single solenoid circuit bar
SOL 2 SOL 4 SOL 6 SOL 8 SOL 16 SOL 18 SOL 20 SOL 22 SOL 24
CONNECTOR
SOL 1 SOL 3 SOL 5 SOL 13 SOL 15 SOL 17 SOL 19 SOL 21 SOL 23
Double solenoid circuit bar
SD09 SD15 SD25
1
SOL. 1
1
SOL. 1
1
SOL. 1
2
SOL. 2
2
SOL. 2
2
SOL. 2
3
SOL. 3
3
SOL. 3
3
SOL. 3
4
SOL. 4
4
SOL. 4
4
SOL. 4
8
COMMON (+)
13
COMMON (+)
21
COMMON (+)
5
SOL. 5
5
SOL. 5
5
SOL. 5
6
SOL. 6
6
SOL. 6
6
SOL. 6
7
SOL. 7
7
SOL. 7
7
SOL. 7
9
COMMON (+)
8
SOL. 8
8
SOL. 8
14
COMMON (+)
22
COMMON (+)
9
SOL. 9
9
SOL. 9
10 SOL. 10
10 SOL. 10
11
SOL. 11
11
SOL. 11
12 SOL. 12
12 SOL. 12
15
COMMON (+)
23
COMMON (+)
13
SOL. 13
14 SOL. 14
15
SOL. 15
16 SOL. 16
24
COMMON (+)
17
18 SOL. 18
19
20 SOL. 20
SOL. 17
SOL. 19
25
COMMON (+)

364
PRECAUTIONS AND WARNINGS
CONCERNING THE APPLICATION, INSTALLATION AND SERVICE OF MAC VALVES AND OTHER MAC VALVES PRODUCTS
The warnings and precautions below are important to be read and understood before
designing into a system any MAC Valves products, and before installing or servicing any MAC Valves
product. Improper use, installation or servicing of any MAC Valves product in some systems could
create a hazard to personnel or equipment. No distinction in importance should be made between
the terms warnings and precautions.
WARNING : .
Under no circumstances are MAC Valves products to be used in any application or in any manner
where failure of the MAC Valves product to operate as intended could in any way jeopardize the
safety of the operator or any other person or property.
• Do not operate outside of pressure range listed on a valve label or outside of the designated
temperature range.
• Air supply must be clean and dry. Moisture or contamination can affect proper operation of the
valve.
• Before attempting to repair, adjust or clean a MAC Valves product, consult catalog, parts & operation
sheet, or factory for proper maintenance procedures, lubrication and cleaning agents. Never
attempt to repair or perform other maintenance with air pressure to the valve.
• If air line lubrication is used do not use any lubrication other than those recommended in the
catalog, parts & operation sheet or by the factory.
APPLICATION PRECAUTIONS : .
INDUSTRIAL USE -
• MAC Valve products are intended for general use in industrial pneumatic and/or vacuum systems.
They are general purpose industrial products with literally thousands of different applications in
industrial systems. These products are not inherently dangerous, but they are only a component of
an overall system. The system in which they are used must provide adequate safeguards to prevent
injury or damage in the event failure occurs, whether it be failure of switches, regulators, cylinders,
valves or any other component.
POWER PRESSES -
MAC Valve products are not designed nor intended to be used to operate and/or control the
operation of clutch and/or brake systems on power presses. There are special products on the market
for such use.
2-POSITION VALVES -
Some MAC valves are 2-position, 4-way valves. When air is supplied to the inlet port(s) of these valves,
there will always be a flow path from the inlet to one of the outlets regardless of which of the two
positions the valve is situated. Therefore, if pressurized air retained in the system would present a
hazard in the application or servicing of the valve or system, a separate method in the system must
be provided to remove the trapped air.
3- POSITION VALVES-
Some MAC valves are 3-position, 4-way valves. These valves are either double solenoid or double
remote air operated.
If either of the two operators is in control, air supplied to the inlet port(s) will pass through the valve
to one of the outlets as on 2-position, 4-way valves. However, if neither operator is in control, the
valve moves to a center position. Listed below are the various center position functions :
A. CLOSED CENTER-
With this type valve, when in the center position all ports are blocked (inlets and exhausts) meaning
the air at both outlet ports is trapped. If trapping the air in both outlet ports would present a hazard
in the application or servicing, a separate method in the system must be provided to remove the
trapped air or this type valve should not be used.
B. OPEN CENTER-
With this type valve, when in the center position, the inlet port(s) is blocked and the two outlet ports
are open to the exhaust port(s) of the valve. If having no air in either outlet port would present a
hazard in the application or servicing, this type valve should not be used.
C. PRESSURE CENTER-
With this type valve, when in the center position, the inlet port(s) is connected to both outlet ports of
the valve. If having pressurized air to either or both outlet ports would present a hazard in the
application or servicing of the valve or system, a separate method in the system must be
provided to remove the retained air or this type valve should not be used.
OPERATING SPECIFICATIONS -
MAC Valves products are to be installed only on applications that meet all operating specifications
described in the MAC catalog for the MAC Valves product.
MANUAL OPERATORS-
Most MAC valves can be ordered with manual operators. Manual operators when depressed, are
designed to shift the valve to the same position as would the corresponding solenoid or remote air
pilot operator if it were activated. Care must be taken to order a type, if any, that will be safe for the
physical location of the manual operator in the system. If intentional or accidental operation of a
valve by a manual operator could cause personal injury or property damage, a manual operator
should not be used.
REMOTE AIR OPERATED VALVES
Pilot valves supplying signal pressure to remote air operated valves should be 3-way valves with
adequate supply and exhaust capacity to provide positive pressurizing and exhausting of the pilot
supply line. Pilot lines should be open to exhaust when valves are deenergized.
INSTALLATION PRECAUTIONS : .
A. Do not install any MAC Valves product without first turning off air (bleed system completely) and
electricity to the machine.
B. MAC Valves products should only be installed by qualified, knowledgeable personnel who
understand how the specific valve is to be pneumatically piped and electrically connected (where
applicable). Flow paths through the valve are shown in the catalog and on the valve by use of ANSI
or ISO type standard graphic symbols. Do not install unless these symbols and the valve functions
and operations are thoroughly understood.
C. If air line lubrication is used do not use any lubrication other than those recommended in the
catalog, parts & operation sheet or by the factory.
SERVICE PRECAUTIONS :
A. Do not service or remove from service any MAC Valves product without first shutting off both the
air and electricity to the valve and making certain no pressurized air which could present a hazard
is retained in the system.
B. MAC Valves products should only be serviced or removed from service by qualified, knowledgeable
personnel who understand how the specific product is used and/or how the specific valve is piped
and used and whether there is air retained in the connecting lines to the valve or electric power still
connected to the valve.
C. Before attempting to repair, adjust or clean a MAC Valves product, consult catalog, parts &
operation sheet, or factory for proper maintenance procedures, lubrication and cleaning agents.
Never attempt to repair or perform other maintenance with air pressure to the valve.
D. MAC Valves products are never to be stepped on while working on a machine. Damage to a MAC
valve, or other product or lines to the product (either air or electrical lines) or accidental activation
of a manual operator on the valve could result in personal injury or property damage.
LIMITATION OF GUARANTEE .
This Guarantee is limited to the replacement or rebuilding of any valve or other product which should
fail to operate properly. Valves or other products, under the MAC Guarantee, must be returned (with
or without bases) transportation prepaid and received at our factory within the Guarantee period.
They will be returned to the customer at the expense of MAC Valves, Inc., and will carry the same
guarantee as provided under the Flat Rate Rebuild Program.
DISCLAIMER OF GUARANTEE .
No claims for labor, material, time, damage, or transportation are allowable nor will any valve or other
product be replaced or rebuilt under this guarantee which has been damaged by the purchaser not
in the normal course of its use and maintenance during the warranty period. The guarantee does not
apply to loss or damage caused by fire, theft, riot, explosion, labor dispute, act of God, or other causes
beyond the control of MAC Valves,Inc. MAC Valves, Inc. shall in no event be liable for remote, special
or consequential damages under the MAC Guarantee, nor under any implied warranties, including
the implied warranty of merchantability.
The above Guarantee is our manner of extending the engineering and service resources of the MAC
Valves, Inc. organization to assure our customer long, and continued satisfaction.