LPG Spark Plugs - Industrial and Bearing Supplies
LPG Spark Plugs - Industrial and Bearing Supplies
LPG Spark Plugs - Industrial and Bearing Supplies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Technical Information | A15<br />
The Right Leads Make a Big Difference<br />
The ignition system is the key to full engine power.<br />
When petrol powered vehicles are converted to <strong>LPG</strong> the<br />
ignition system performance must be more efficient. To<br />
ensure this, <strong>LPG</strong> specialists need to look for potential<br />
trouble spots. Ignition leads are sometimes over looked<br />
<strong>and</strong> can make a significant difference to performance.<br />
Always check the following during a <strong>LPG</strong> service:<br />
1. To ensure proper functioning of the ignition system,<br />
ignition leads must be in good condition (not worn out or<br />
damaged) <strong>and</strong> all connections must be tight.<br />
2. The ignition system can be tested with an engine tester<br />
or oscilloscope. The measured ignition voltage should<br />
match the target voltage given by the vehicle<br />
manufacturer. If anything is out of the ordinary then<br />
replace the corresponding ignition cable or component.<br />
Please note: Especially with older resistance ignition<br />
wires, the cable core can break. In such scenarios the<br />
entire ignition cable set should be replaced. Bosch offers<br />
ignition cables for all applications.<br />
A poor performing ignition system can result in:<br />
Rough running<br />
Misfiring<br />
Significant drop in performance<br />
Increased fuel consumption<br />
Danger of damage to other components<br />
Refer to the Bosch Ignition Leads catalogue for further<br />
details.<br />
2009 | 2010 Bosch Automotive Aftermarket