PLS Drip-proof 3-phase induction motors - Etum Elektronik
PLS Drip-proof 3-phase induction motors - Etum Elektronik
PLS Drip-proof 3-phase induction motors - Etum Elektronik
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
C1.1 - MOUNTING ARRANGEMENTS<br />
<strong>PLS</strong><br />
<strong>Drip</strong>-<strong>proof</strong> 3-<strong>phase</strong> <strong>induction</strong> <strong>motors</strong><br />
Construction<br />
IM 1001 (IM B3)<br />
IM 3001 (IM B5)<br />
C1 - Mounting arrangements<br />
The various mounting arrangements for<br />
machines are defined in IEC 60034-7.<br />
Below is an extract from the standard which<br />
shows equivalent terms in current use.<br />
Code formulation<br />
International<br />
code<br />
IM<br />
Foot-mounted,<br />
flange-mounted, etc<br />
1 00 1<br />
IM 3011 (IM V1)<br />
Mounting<br />
arrangements<br />
C1.2 - MOUNTINGS AND POSITIONS (IEC standard 60034-7)<br />
Foot-mounted <strong>motors</strong><br />
• all frame sizes<br />
(FF) flange-mounted <strong>motors</strong><br />
• all frame sizes<br />
(except IM 3001, which is limited to frame size 225)<br />
IM 1001 (IM B3)<br />
- Horizontal shaft<br />
- Feet on floor<br />
IM 1051 (IM B6)<br />
- Horizontal shaft<br />
- Wall-mounted with feet on<br />
left hand side when viewed<br />
from drive end<br />
IM 1061 (IM B7)<br />
- Horizontal shaft<br />
- Wall-mounted with feet on<br />
right hand side when viewed<br />
from drive end<br />
IM 3001 (IM B5)<br />
- Horizontal shaft<br />
IM 3011 (IM V1)<br />
- Vertical shaft facing down<br />
IM 3031 (IM V3)<br />
- Vertical shaft facing up<br />
Type of shaft<br />
extension<br />
Code I Code II<br />
IM B 3 IM 1001<br />
IM V 5 IM 1011<br />
IM V 6 IM 1031<br />
IM B 6 IM 1051<br />
IM B 7 IM 1061<br />
IM B 8 IM 1071<br />
IM B 35 IM 2001<br />
IM V 15 IM 2011<br />
IM V 36 IM 2031<br />
IM B 5 IM 3001<br />
IM V 1 IM 3011<br />
IM V 3 IM 3031<br />
Codes I and II are interchangeable. It should<br />
however be noted that the above code list is<br />
not exhaustive and you should therefore<br />
refer to IEC 60034-7 for other designations.<br />
Below you will find the most common<br />
mounting arrangements with line drawings<br />
and an explanation of the standard symbols<br />
used.<br />
IM 1071 (IM B8)<br />
- Horizontal shaft<br />
- Feet on top<br />
IM 1011 (IM V5)<br />
- Vertical shaft facing down<br />
- Feet on wall<br />
IM 1031 (IM V6)<br />
- Vertical shaft facing up<br />
- Feet on wall<br />
IM<br />
2001 (IM B35)<br />
- Horizontal shaft<br />
- Feet on floor<br />
IM 2011 (IM V15)<br />
- Vertical shaft facing down<br />
- Feet on wall<br />
IM 2031<br />
(IM V36)<br />
- Vertical shaft facing up<br />
- Feet on wall<br />
13