Maintenance Manual - Central States Industrial Equipment ...
Maintenance Manual - Central States Industrial Equipment ...
Maintenance Manual - Central States Industrial Equipment ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ASSEMBLY<br />
Step 16<br />
Step 17<br />
Step 18<br />
Now that the drum is centered<br />
on the follower plate, adjust the<br />
alignment guides to match the drum<br />
size. NOTE: Repeat steps 33 and 34<br />
for a new drum size or if the guides<br />
are inadvertently moved.<br />
Install user supplied discharge<br />
hose on the pump using the<br />
necessary reducer, clamp band and<br />
o-rings.<br />
NOTE: A 64mm (2-1/2") or 76mm<br />
(3") Hose is suggested for best<br />
performance. (Reducer not<br />
included)<br />
Thread discharge hose through<br />
support loop on the bottom of the<br />
ram support bar.<br />
WILDEN PUMP & ENGINEERING, LLC 8 WIL-12071-E-01
Change language