Position switch SA - J.E. StorkAir
Position switch SA - J.E. StorkAir
Position switch SA - J.E. StorkAir
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Switches<br />
<strong>Position</strong> <strong>switch</strong><br />
<strong>SA</strong><br />
<strong>SA</strong> 1-3 V<br />
<strong>Position</strong> <strong>switch</strong> for remote control of fans and<br />
heat recovery equipment, over 3 different speeds<br />
or 2 different speeds + off position. The standard<br />
indication plate supplied gives the designation<br />
1/2/3 and 0/1/2. However, we do not recommend<br />
a position <strong>switch</strong> with an off-position for domestic<br />
ventilation so as to ensure permanent ventilation.<br />
The casing is white (RAL 9010), and suitable, as<br />
standard, for fitting in a 40 mm deep flush-outlet.<br />
A surface mounting box is available for fitting. The<br />
<strong>switch</strong> has a maximum nominal operating voltage<br />
of 660V. The maximum nominal operating current<br />
(pure Ohmic load) is 20A. The maximum<br />
permissible connectable motor capacity for<br />
single-phase 230V is 2.2kW.<br />
<strong>SA</strong> 0-3 V<br />
<strong>Position</strong> <strong>switch</strong> for remote control<br />
of domestic fans and heat recovery<br />
units, over 3 different speeds + offposition.<br />
The casing is white (RAL<br />
9010), and suitable, as standard,<br />
for fitting in a 40 mm deep flushoutlet.<br />
A surface mounting box is<br />
available for fitting. The <strong>switch</strong> has<br />
a maximum nominal operating<br />
voltage of 660V. The maximum<br />
nominal operating current (pure<br />
Ohmic load) is 20A. The maximum<br />
permissible connectable motor<br />
capacity for single-phase 230V is<br />
2.2kW.<br />
<strong>SA</strong> 0-3 V<br />
<strong>SA</strong>I Flash<br />
schakelvolgorde <strong>SA</strong> 0-3V<br />
14
Switches<br />
15
Change language