blueprint reading for industry - Western Nevada College
blueprint reading for industry - Western Nevada College
blueprint reading for industry - Western Nevada College
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WESTERN NEVADA COLLEGE<br />
DFT 110B – BLUEPRINT READING FOR INDUSTRY<br />
SPRING 2012 – LECTURE & ASSIGNMENT SCHEDULE<br />
Chapter numbers given, refer to the text listed on page one of the syllabus and are<br />
given so the student can read the chapter be<strong>for</strong>e class. Reading and studying the<br />
material ahead of class will greatly enhance the learning process. Some topics will take<br />
more than one class time.<br />
LECTURE TOPICS MAY BE ADJUSTED OR REARRANGED AS NEEDED<br />
Course competencies are represented by the lecture topics as listed below.<br />
Week One: January 24, 2012 Read: Units 1, 2, 3, & 4<br />
Topics: Syllabus and overview of course<br />
Alphabet of Lines<br />
Multiview Drawings<br />
Abbreviations &Title Blocks<br />
Working Drawings<br />
Assignments: No. 1 – Handout Due: January 31, 2012<br />
Week Two: January 31, 2012 Read: Units 5 & 6<br />
Topics:<br />
Dimensioning practices<br />
Inclined Surfaces<br />
Angles & Slots<br />
No. 2 – p.44<br />
Assignments: No. 3 – p.43<br />
No. 4 – p.54-55<br />
Worksheet 5,6<br />
Due: February 7, 2012<br />
Week Three: February 7, 2012 Read: Units 5 & 8<br />
Topics:<br />
Assignments:<br />
Circular & Cylindrical features<br />
Rounds & Fillets<br />
Machining symbols<br />
Revisions<br />
Breaks<br />
No. 5 – p.45<br />
No. 6 – p.74-75<br />
Worksheet 8<br />
Due: February 14, 2012<br />
01/24/13<br />
2
Change language