Belimo-Xref and Tech Guide - Kele
Belimo-Xref and Tech Guide - Kele
Belimo-Xref and Tech Guide - Kele
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
UBSP0008 Custom Retrofit Linkage for Ball Valves<br />
For Use with <strong>Belimo</strong> SY Actuators<br />
®<br />
MOUNTING<br />
BRACKET<br />
SY CPL/INTERFACE<br />
VALVE COUPLING<br />
SPLIT LOCK<br />
WASHER<br />
BOLT<br />
BOLT<br />
LOCK WASHER<br />
Application<br />
The UBSP custom retrofit kit is designed to easily attach to the valve mounting pad on<br />
select competitor valves utilizing <strong>Belimo</strong> actuators. This kit will help to restore service<br />
without removal of the valve, saving down time. The UBSP retrofit kit is available in<br />
various configurations for use with both 2-way <strong>and</strong> 3-way valves utilizing single or<br />
dual actuation.<br />
Operation<br />
The UBSP custom kit <strong>and</strong> mounted actuator(s) are capable of rotating 95° in both CW<br />
<strong>and</strong> CCW directions. This allows the ball to fully open or close. When directional needs<br />
vary, the actuators can be flipped or directional switch turned to a new rotation. Refer<br />
to Master Slave wiring for dual mounted actuators.<br />
Default/Configuration<br />
The actuator is sold separately from the linkage, allowing users to select an actuator<br />
with the desired control signal. The linkage utilizes st<strong>and</strong>ard airside or SY actuators<br />
which can be purchased at any time <strong>and</strong> mounted in the field.<br />
NUT<br />
<strong>Tech</strong>nical Data<br />
Service<br />
chilled or hot water <strong>and</strong> steam<br />
Applicable valve size ½" [13], ¾" [19], 1" [25], 1-¼" [32], 1-½"<br />
[38], 2" [50], 2-½” [63.5], 3” [76.2]<br />
Frame, plate, base<br />
stainless steel<br />
Shaft<br />
steel<br />
Coupling<br />
steel<br />
Mounting position 360°<br />
Media temp. range (water) -22°F to +298°F [-30°C to +148°C]<br />
Media temp. range (steam) 20°F to 298°F [-7°C to +148°C]<br />
Housing<br />
NEMA 4X, IP66<br />
Weight<br />
12 lbs<br />
Linkage<br />
UBSP0008<br />
Dimensions (Inches [mm])<br />
B<br />
A<br />
Suitable Actuators<br />
Non-Spring Return<br />
SY1, SY2, SY3, SY4, SY5, SY6<br />
C<br />
A B C<br />
16.63 [422.4] 12.00 [305] 15.00 [381]<br />
Application Notes<br />
Custom retrofit kits require a filled out retrofit form during or before ordering.<br />
P10406 - 04/13 - Subject to change. © <strong>Belimo</strong> Aircontrols (USA), Inc.<br />
183<br />
800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA/CARIBBEAN
Change language