Belimo-Xref and Tech Guide - Kele
Belimo-Xref and Tech Guide - Kele
Belimo-Xref and Tech Guide - Kele
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ZG-JSL, ZG-JSLA Jackshaft Retrofit Linkage<br />
For EF, AF, NF, LF, GM, GK, AM <strong>and</strong> NM Series Actuators<br />
®<br />
Application<br />
The ZG-JSL jackshaft linkage is designed to easily attach to any part of a<br />
jackshaft <strong>and</strong> allows easy installation of select <strong>Belimo</strong> actuators.<br />
The unique open ended design <strong>and</strong> clamp insert allows the ZG-JSL to be<br />
used with any jackshaft from ½” to ¾” in diameter. Removal of the insert<br />
will allow the linkage to attach to a maximum shaft diameter of 1.05”.<br />
Changing the anti-rotation plate will allow various actuators to be mounted.<br />
Default/Configuration<br />
The ZG-JSL linkage can also be configured by moving the anti-rotation plate<br />
90° for space saving applications. See mounting configurations below. The<br />
ZG-JSLA will have a factory mounted actuator on the linkage in the vertical<br />
position only.<br />
Operation<br />
The ¾” diameter built-in steel shaft allows direct coupling to <strong>Belimo</strong> series<br />
actuators (chart below). There is a torque reduction when using the ZG-JSL<br />
linkage. Verify application requirements before ordering.<br />
<strong>Tech</strong>nical Data ZG-JSL, ZG-JSLA<br />
Fits shaft diameter<br />
½” to ¾” with insert, 1.05” without insert<br />
Materials:<br />
Housing<br />
galvanized steel<br />
Bearings<br />
GF Delrin<br />
Shafts<br />
steel<br />
Max torque output<br />
90% of rated actuator torque<br />
Max actuator yield<br />
see chart on right<br />
Mech. angle of rotation 90° mountable<br />
Ambient temperature -22°F to +122°F [-33°C to +50°C]<br />
Storage temperature -40°F to +176°F [-40°C to +80°C]<br />
Housing type NEMA 2<br />
Weight<br />
3.25 lbs [1.47 kg]<br />
Actuator<br />
EF Series*<br />
Classic AF Series<br />
AF Series<br />
NF Series<br />
LF Series***<br />
GM/GK Series**<br />
AM Series<br />
NM Series<br />
* ZG-121 adapter must be used with EF.<br />
** EF, GM/GK not for use with ½” shafts.<br />
*** K6-1 clamp must be used with LF.<br />
Torque Reduction<br />
239 in-lbs<br />
123 in-lbs<br />
166 in-lbs<br />
87 in-lbs<br />
33 in-lbs<br />
288 in-lbs<br />
166 in-lbs<br />
87 in-lbs<br />
Mounting Configurations<br />
Dimensions (Inches [mm])<br />
8.74” [222]<br />
14.05” [357]<br />
10.16” [258]<br />
4.13” [105] 1.93” [49]<br />
3.86” [98]<br />
4.76” [121]<br />
4.65” [118]<br />
6.42” [163]<br />
10.31” [262]<br />
D314<br />
P10406 - 04/13 - Subject to change. © <strong>Belimo</strong> Aircontrols (USA), Inc.<br />
4.41” [112]<br />
23<br />
800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA/CARIBBEAN
Change language